/* SPDX-License-Identifier: GPL-2.0-or-later */ /* Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org> <http://rt2x00.serialmonkey.com> */ /* Module: rt2800usb Abstract: Data structures and registers for the rt2800usb module. Supported chipsets: RT2800U. */ #ifndef RT2800USB_H #define RT2800USB_H /* * 8051 firmware image. */ #define FIRMWARE_RT2870 "rt2870.bin" #define FIRMWARE_IMAGE_BASE 0x3000 /* * DMA descriptor defines. */ #define TXINFO_DESC_SIZE (1 * sizeof(__le32)) #define RXINFO_DESC_SIZE (1 * sizeof(__le32)) /* * TX Info structure */ /* * Word0 * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler. * 0:MGMT, 1:HCCA 2:EDCA * USB_DMA_NEXT_VALID: Used ONLY in USB bulk Aggregation, NextValid * DMA_TX_BURST: used ONLY in USB bulk Aggregation. * Force USB DMA transmit frame from current selected endpoint */ #define TXINFO_W0_USB_DMA_TX_PKT_LEN FIELD32(0x0000ffff) #define TXINFO_W0_WIV FIELD32(0x01000000) #define TXINFO_W0_QSEL FIELD32(0x06000000) #define TXINFO_W0_SW_USE_LAST_ROUND FIELD32(0x08000000) #define TXINFO_W0_USB_DMA_NEXT_VALID FIELD32(0x40000000) #define TXINFO_W0_USB_DMA_TX_BURST FIELD32(0x80000000) /* * RX Info structure */ /* * Word 0 */ #define RXINFO_W0_USB_DMA_RX_PKT_LEN FIELD32(0x0000ffff) /* * RX descriptor format for RX Ring. */ /* * Word0 * UNICAST_TO_ME: This RX frame is unicast to me. * MULTICAST: This is a multicast frame. * BROADCAST: This is a broadcast frame. * MY_BSS: this frame belongs to the same BSSID. * CRC_ERROR: CRC error. * CIPHER_ERROR: 0: decryption okay, 1:ICV error, 2:MIC error, 3:KEY not valid. * AMSDU: rx with 802.3 header, not 802.11 header. */ #define RXD_W0_BA FIELD32(0x00000001) #define RXD_W0_DATA FIELD32(0x00000002) #define RXD_W0_NULLDATA FIELD32(0x00000004) #define RXD_W0_FRAG FIELD32(0x00000008) #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000010) #define RXD_W0_MULTICAST FIELD32(0x00000020) #define RXD_W0_BROADCAST FIELD32(0x00000040) #define RXD_W0_MY_BSS FIELD32(0x00000080) #define RXD_W0_CRC_ERROR FIELD32(0x00000100) #define RXD_W0_CIPHER_ERROR FIELD32(0x00000600) #define RXD_W0_AMSDU FIELD32(0x00000800) #define RXD_W0_HTC FIELD32(0x00001000) #define RXD_W0_RSSI FIELD32(0x00002000) #define RXD_W0_L2PAD FIELD32(0x00004000) #define RXD_W0_AMPDU FIELD32(0x00008000) #define RXD_W0_DECRYPTED FIELD32(0x00010000) #define RXD_W0_PLCP_RSSI FIELD32(0x00020000) #define RXD_W0_CIPHER_ALG FIELD32(0x00040000) #define RXD_W0_LAST_AMSDU FIELD32(0x00080000) #define RXD_W0_PLCP_SIGNAL FIELD32(0xfff00000) #endif /* RT2800USB_H */ |