# SPDX-License-Identifier: GPL-2.0 obj-$([31mCONFIG_PCIE_CADENCE[0m) += pcie-cadence.o obj-$([31mCONFIG_PCIE_CADENCE_HOST[0m) += pcie-cadence-host.o obj-$([31mCONFIG_PCIE_CADENCE_EP[0m) += pcie-cadence-ep.o obj-$([31mCONFIG_PCI_FTPCI100[0m) += pci-ftpci100.o obj-$([31mCONFIG_PCI_HYPERV[0m) += pci-hyperv.o obj-$([31mCONFIG_PCI_HYPERV_INTERFACE[0m) += pci-hyperv-intf.o obj-$([31mCONFIG_PCI_MVEBU[0m) += pci-mvebu.o obj-$([31mCONFIG_PCI_AARDVARK[0m) += pci-aardvark.o obj-$([31mCONFIG_PCI_TEGRA[0m) += pci-tegra.o obj-$([31mCONFIG_PCI_RCAR_GEN2[0m) += pci-rcar-gen2.o obj-$([31mCONFIG_PCIE_RCAR[0m) += pcie-rcar.o obj-$([31mCONFIG_PCI_HOST_COMMON[0m) += pci-host-common.o obj-$([31mCONFIG_PCI_HOST_GENERIC[0m) += pci-host-generic.o obj-$([31mCONFIG_PCIE_XILINX[0m) += pcie-xilinx.o obj-$([31mCONFIG_PCIE_XILINX_NWL[0m) += pcie-xilinx-nwl.o obj-$([31mCONFIG_PCI_V3_SEMI[0m) += pci-v3-semi.o obj-$([31mCONFIG_PCI_XGENE_MSI[0m) += pci-xgene-msi.o obj-$([31mCONFIG_PCI_VERSATILE[0m) += pci-versatile.o obj-$([31mCONFIG_PCIE_IPROC[0m) += pcie-iproc.o obj-$([31mCONFIG_PCIE_IPROC_MSI[0m) += pcie-iproc-msi.o obj-$([31mCONFIG_PCIE_IPROC_PLATFORM[0m) += pcie-iproc-platform.o obj-$([31mCONFIG_PCIE_IPROC_BCMA[0m) += pcie-iproc-bcma.o obj-$([31mCONFIG_PCIE_ALTERA[0m) += pcie-altera.o obj-$([31mCONFIG_PCIE_ALTERA_MSI[0m) += pcie-altera-msi.o obj-$([31mCONFIG_PCIE_ROCKCHIP[0m) += pcie-rockchip.o obj-$([31mCONFIG_PCIE_ROCKCHIP_EP[0m) += pcie-rockchip-ep.o obj-$([31mCONFIG_PCIE_ROCKCHIP_HOST[0m) += pcie-rockchip-host.o obj-$([31mCONFIG_PCIE_MEDIATEK[0m) += pcie-mediatek.o obj-$([31mCONFIG_PCIE_MOBIVEIL[0m) += pcie-mobiveil.o obj-$([31mCONFIG_PCIE_TANGO_SMP8759[0m) += pcie-tango.o obj-$([31mCONFIG_VMD[0m) += vmd.o # pcie-hisi.o quirks are needed even without [31mCONFIG_PCIE_DW[0m obj-y += dwc/ # The following drivers are for devices that use the generic ACPI # pci_root.c driver but don't support standard ECAM config access. # They contain MCFG quirks to replace the generic ECAM accessors with # device-specific ones that are shared with the DT driver. # The ACPI driver is generic and should not require driver-specific # config options to be enabled, so we always build these drivers on # ARM64 and use internal ifdefs to only build the pieces we need # depending on whether ACPI, the DT driver, or both are enabled. ifdef [31mCONFIG_PCI[0m obj-$([31mCONFIG_ARM64[0m) += pci-thunder-ecam.o obj-$([31mCONFIG_ARM64[0m) += pci-thunder-pem.o obj-$([31mCONFIG_ARM64[0m) += pci-xgene.o endif |