# SPDX-License-Identifier: GPL-2.0-only # # AIC7XXX and AIC79XX 2.5.X Kernel configuration File. # $Id: //depot/linux-aic79xx-2.5.0/drivers/scsi/aic7xxx/Kconfig.aic7xxx#7 $ # config [31mCONFIG_SCSI_AIC7XXX[0m tristate "Adaptec AIC7xxx Fast -> U160 support" depends on ([31mCONFIG_PCI[0m || [31mCONFIG_EISA[0m) && [31mCONFIG_SCSI[0m select [31mCONFIG_SCSI_SPI_ATTRS[0m ---help--- This driver supports all of Adaptec's Fast through Ultra 160 [31mCONFIG_PCI[0m based [31mCONFIG_SCSI[0m controllers as well as the aic7770 based [31mCONFIG_EISA[0m and VLB [31mCONFIG_SCSI[0m controllers (the 274x and 284x series). For AAA and ARO based configurations, only [31mCONFIG_SCSI[0m functionality is provided. To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be called aic7xxx. config [31mCONFIG_AIC7XXX_CMDS_PER_DEVICE[0m int "Maximum number of TCQ commands per device" depends on [31mCONFIG_SCSI_AIC7XXX[0m default "32" ---help--- Specify the number of commands you would like to allocate per [31mCONFIG_SCSI[0m device when Tagged Command Queueing (TCQ) is enabled on that device. This is an upper bound value for the number of tagged transactions to be used for any device. The aic7xxx driver will automatically vary this number based on device behavior. For devices with a fixed maximum, the driver will eventually lock to this maximum and display a console message indicating this value. Due to resource allocation issues in the Linux [31mCONFIG_SCSI[0m mid-layer, using a high number of commands per device may result in memory allocation failures when many devices are attached to the system. For this reason, the default is set to 32. Higher values may result in higher performance on some devices. The upper bound is 253. 0 disables tagged queueing. Per device tag depth can be controlled via the kernel command line "tag_info" option. See Documentation/scsi/aic7xxx.txt for details. config [31mCONFIG_AIC7XXX_RESET_DELAY_MS[0m int "Initial bus reset delay in milli-seconds" depends on [31mCONFIG_SCSI_AIC7XXX[0m default "5000" ---help--- The number of milliseconds to delay after an initial bus reset. The bus settle delay following all error recovery actions is dictated by the [31mCONFIG_SCSI[0m layer and is not affected by this value. Default: 5000 (5 seconds) config [31mCONFIG_AIC7XXX_BUILD_FIRMWARE[0m bool "Build Adapter Firmware with Kernel Build" depends on [31mCONFIG_SCSI_AIC7XXX[0m && ![31mCONFIG_PREVENT_FIRMWARE_BUILD[0m help This option should only be enabled if you are modifying the firmware source to the aic7xxx driver and wish to have the generated firmware include files updated during a normal kernel build. The assembler for the firmware requires lex and yacc or their equivalents, as well as the db v1 library. You may have to install additional packages or modify the assembler Makefile or the files it includes if your build environment is different than that of the author. config [31mCONFIG_AIC7XXX_DEBUG_ENABLE[0m bool "Compile in Debugging Code" depends on [31mCONFIG_SCSI_AIC7XXX[0m default y help Compile in aic7xxx debugging code that can be useful in diagnosing driver errors. config [31mCONFIG_AIC7XXX_DEBUG_MASK[0m int "Debug code enable mask (2047 for all debugging)" depends on [31mCONFIG_SCSI_AIC7XXX[0m default "0" help Bit mask of debug options that is only valid if the CONFIG_AIC7XXX_DEBUG_ENABLE option is enabled. The bits in this mask are defined in the drivers/scsi/aic7xxx/aic7xxx.h - search for the variable ahc_debug in that file to find them. config [31mCONFIG_AIC7XXX_REG_PRETTY_PRINT[0m bool "Decode registers during diagnostics" depends on [31mCONFIG_SCSI_AIC7XXX[0m default y help Compile in register value tables for the output of expanded register contents in diagnostics. This make it much easier to understand debug output without having to refer to a data book and/or the aic7xxx.reg file. |