#!/bin/bash
#
# This test is for checking rtnetlink callpaths, and get as much coverage as possible.
#
# set -e
devdummy="test-dummy0"
ret=0
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
# set global exit status, but never reset nonzero one.
check_err()
{
if [ $ret -eq 0 ]; then
ret=$1
fi
}
# same but inverted -- used when command must fail for test to pass
check_fail()
{
if [ $1 -eq 0 ]; then
ret=1
fi
}
kci_add_dummy()
{
ip link add name "$devdummy" type dummy
check_err $?
ip link set "$devdummy" up
check_err $?
}
kci_del_dummy()
{
ip link del dev "$devdummy"
check_err $?
}
kci_test_netconf()
{
dev="$1"
r=$ret
ip netconf show dev "$dev" > /dev/null
check_err $?
for f in 4 6; do
ip -$f netconf show dev "$dev" > /dev/null
check_err $?
done
if [ $ret -ne 0 ] ;then
echo "FAIL: ip netconf show $dev"
test $r -eq 0 && ret=0
return 1
fi
}
# add a bridge with vlans on top
kci_test_bridge()
{
devbr="test-br0"
vlandev="testbr-vlan1"
ret=0
ip link add name "$devbr" type bridge
check_err $?
ip link set dev "$devdummy" master "$devbr"
check_err $?
ip link set "$devbr" up
check_err $?
ip link add link "$devbr" name "$vlandev" type vlan id 1
check_err $?
ip addr add dev "$vlandev" 10.200.7.23/30
check_err $?
ip -6 addr add dev "$vlandev" dead:42::1234/64
check_err $?
ip -d link > /dev/null
check_err $?
ip r s t all > /dev/null
check_err $?
for name in "$devbr" "$vlandev" "$devdummy" ; do
kci_test_netconf "$name"
done
ip -6 addr del dev "$vlandev" dead:42::1234/64
check_err $?
ip link del dev "$vlandev"
check_err $?
ip link del dev "$devbr"
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: bridge setup"
return 1
fi
echo "PASS: bridge setup"
}
kci_test_gre()
{
gredev=neta
rem=10.42.42.1
loc=10.0.0.1
ret=0
ip tunnel add $gredev mode gre remote $rem local $loc ttl 1
check_err $?
ip link set $gredev up
check_err $?
ip addr add 10.23.7.10 dev $gredev
check_err $?
ip route add 10.23.8.0/30 dev $gredev
check_err $?
ip addr add dev "$devdummy" 10.23.7.11/24
check_err $?
ip link > /dev/null
check_err $?
ip addr > /dev/null
check_err $?
kci_test_netconf "$gredev"
ip addr del dev "$devdummy" 10.23.7.11/24
check_err $?
ip link del $gredev
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: gre tunnel endpoint"
return 1
fi
echo "PASS: gre tunnel endpoint"
}
# tc uses rtnetlink too, for full tc testing
# please see tools/testing/selftests/tc-testing.
kci_test_tc()
{
dev=lo
ret=0
tc qdisc add dev "$dev" root handle 1: htb
check_err $?
tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit
check_err $?
tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256
check_err $?
tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256
check_err $?
tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256
check_err $?
tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10
check_err $?
tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10
check_err $?
tc filter show dev "$dev" parent 1:0 > /dev/null
check_err $?
tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32
check_err $?
tc filter show dev "$dev" parent 1:0 > /dev/null
check_err $?
tc qdisc del dev "$dev" root handle 1: htb
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: tc htb hierarchy"
return 1
fi
echo "PASS: tc htb hierarchy"
}
kci_test_polrouting()
{
ret=0
ip rule add fwmark 1 lookup 100
check_err $?
ip route add local 0.0.0.0/0 dev lo table 100
check_err $?
ip r s t all > /dev/null
check_err $?
ip rule del fwmark 1 lookup 100
check_err $?
ip route del local 0.0.0.0/0 dev lo table 100
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: policy route test"
return 1
fi
echo "PASS: policy routing"
}
kci_test_route_get()
{
local hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy)
ret=0
ip route get 127.0.0.1 > /dev/null
check_err $?
ip route get 127.0.0.1 dev "$devdummy" > /dev/null
check_err $?
ip route get ::1 > /dev/null
check_err $?
ip route get fe80::1 dev "$devdummy" > /dev/null
check_err $?
ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x1 mark 0x1 > /dev/null
check_err $?
ip route get ::1 from ::1 iif lo oif lo tos 0x1 mark 0x1 > /dev/null
check_err $?
ip addr add dev "$devdummy" 10.23.7.11/24
check_err $?
ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" > /dev/null
check_err $?
ip route add 10.23.8.0/24 \
nexthop via 10.23.7.13 dev "$devdummy" \
nexthop via 10.23.7.14 dev "$devdummy"
check_err $?
sysctl -wq net.ipv4.fib_multipath_hash_policy=0
ip route get 10.23.8.11 > /dev/null
check_err $?
sysctl -wq net.ipv4.fib_multipath_hash_policy=1
ip route get 10.23.8.11 > /dev/null
check_err $?
sysctl -wq net.ipv4.fib_multipath_hash_policy="$hash_policy"
ip route del 10.23.8.0/24
check_err $?
ip addr del dev "$devdummy" 10.23.7.11/24
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: route get"
return 1
fi
echo "PASS: route get"
}
kci_test_addrlft()
{
for i in $(seq 10 100) ;do
lft=$(((RANDOM%3) + 1))
ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1))
check_err $?
done
sleep 5
ip addr show dev "$devdummy" | grep "10.23.11."
if [ $? -eq 0 ]; then
echo "FAIL: preferred_lft addresses remaining"
check_err 1
return
fi
echo "PASS: preferred_lft addresses have expired"
}
kci_test_promote_secondaries()
{
promote=$(sysctl -n net.ipv4.conf.$devdummy.promote_secondaries)
sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=1
for i in $(seq 2 254);do
IP="10.23.11.$i"
ip -f inet addr add $IP/16 brd + dev "$devdummy"
ifconfig "$devdummy" $IP netmask 255.255.0.0
done
ip addr flush dev "$devdummy"
[ $promote -eq 0 ] && sysctl -q net.ipv4.conf.$devdummy.promote_secondaries=0
echo "PASS: promote_secondaries complete"
}
kci_test_addrlabel()
{
ret=0
ip addrlabel add prefix dead::/64 dev lo label 1
check_err $?
ip addrlabel list |grep -q "prefix dead::/64 dev lo label 1"
check_err $?
ip addrlabel del prefix dead::/64 dev lo label 1 2> /dev/null
check_err $?
ip addrlabel add prefix dead::/64 label 1 2> /dev/null
check_err $?
ip addrlabel del prefix dead::/64 label 1 2> /dev/null
check_err $?
# concurrent add/delete
for i in $(seq 1 1000); do
ip addrlabel add prefix 1c3::/64 label 12345 2>/dev/null
done &
for i in $(seq 1 1000); do
ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
done
wait
ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null
if [ $ret -ne 0 ];then
echo "FAIL: ipv6 addrlabel"
return 1
fi
echo "PASS: ipv6 addrlabel"
}
kci_test_ifalias()
{
ret=0
namewant=$(uuidgen)
syspathname="/sys/class/net/$devdummy/ifalias"
ip link set dev "$devdummy" alias "$namewant"
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: cannot set interface alias of $devdummy to $namewant"
return 1
fi
ip link show "$devdummy" | grep -q "alias $namewant"
check_err $?
if [ -r "$syspathname" ] ; then
read namehave < "$syspathname"
if [ "$namewant" != "$namehave" ]; then
echo "FAIL: did set ifalias $namewant but got $namehave"
return 1
fi
namewant=$(uuidgen)
echo "$namewant" > "$syspathname"
ip link show "$devdummy" | grep -q "alias $namewant"
check_err $?
# sysfs interface allows to delete alias again
echo "" > "$syspathname"
ip link show "$devdummy" | grep -q "alias $namewant"
check_fail $?
for i in $(seq 1 100); do
uuidgen > "$syspathname" &
done
wait
# re-add the alias -- kernel should free mem when dummy dev is removed
ip link set dev "$devdummy" alias "$namewant"
check_err $?
fi
if [ $ret -ne 0 ]; then
echo "FAIL: set interface alias $devdummy to $namewant"
return 1
fi
echo "PASS: set ifalias $namewant for $devdummy"
}
kci_test_vrf()
{
vrfname="test-vrf"
ret=0
ip link show type vrf 2>/dev/null
if [ $? -ne 0 ]; then
echo "SKIP: vrf: iproute2 too old"
return $ksft_skip
fi
ip link add "$vrfname" type vrf table 10
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: can't add vrf interface, skipping test"
return 0
fi
ip -br link show type vrf | grep -q "$vrfname"
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: created vrf device not found"
return 1
fi
ip link set dev "$vrfname" up
check_err $?
ip link set dev "$devdummy" master "$vrfname"
check_err $?
ip link del dev "$vrfname"
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: vrf"
return 1
fi
echo "PASS: vrf"
}
kci_test_encap_vxlan()
{
ret=0
vxlan="test-vxlan0"
vlan="test-vlan0"
testns="$1"
ip -netns "$testns" link add "$vxlan" type vxlan id 42 group 239.1.1.1 \
dev "$devdummy" dstport 4789 2>/dev/null
if [ $? -ne 0 ]; then
echo "FAIL: can't add vxlan interface, skipping test"
return 0
fi
check_err $?
ip -netns "$testns" addr add 10.2.11.49/24 dev "$vxlan"
check_err $?
ip -netns "$testns" link set up dev "$vxlan"
check_err $?
ip -netns "$testns" link add link "$vxlan" name "$vlan" type vlan id 1
check_err $?
# changelink testcases
ip -netns "$testns" link set dev "$vxlan" type vxlan vni 43 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan group ffe5::5 dev "$devdummy" 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan ttl inherit 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan ttl 64
check_err $?
ip -netns "$testns" link set dev "$vxlan" type vxlan nolearning
check_err $?
ip -netns "$testns" link set dev "$vxlan" type vxlan proxy 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan norsc 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan l2miss 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan l3miss 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan external 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan udpcsum 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumtx 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan udp6zerocsumrx 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumtx 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan remcsumrx 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan gbp 2>/dev/null
check_fail $?
ip -netns "$testns" link set dev "$vxlan" type vxlan gpe 2>/dev/null
check_fail $?
ip -netns "$testns" link del "$vxlan"
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: vxlan"
return 1
fi
echo "PASS: vxlan"
}
kci_test_encap_fou()
{
ret=0
name="test-fou"
testns="$1"
ip fou help 2>&1 |grep -q 'Usage: ip fou'
if [ $? -ne 0 ];then
echo "SKIP: fou: iproute2 too old"
return $ksft_skip
fi
ip -netns "$testns" fou add port 7777 ipproto 47 2>/dev/null
if [ $? -ne 0 ];then
echo "FAIL: can't add fou port 7777, skipping test"
return 1
fi
ip -netns "$testns" fou add port 8888 ipproto 4
check_err $?
ip -netns "$testns" fou del port 9999 2>/dev/null
check_fail $?
ip -netns "$testns" fou del port 7777
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: fou"
return 1
fi
echo "PASS: fou"
}
# test various encap methods, use netns to avoid unwanted interference
kci_test_encap()
{
testns="testns"
ret=0
ip netns add "$testns"
if [ $? -ne 0 ]; then
echo "SKIP encap tests: cannot add net namespace $testns"
return $ksft_skip
fi
ip -netns "$testns" link set lo up
check_err $?
ip -netns "$testns" link add name "$devdummy" type dummy
check_err $?
ip -netns "$testns" link set "$devdummy" up
check_err $?
kci_test_encap_vxlan "$testns"
kci_test_encap_fou "$testns"
ip netns del "$testns"
}
kci_test_macsec()
{
msname="test_macsec0"
ret=0
ip macsec help 2>&1 | grep -q "^Usage: ip macsec"
if [ $? -ne 0 ]; then
echo "SKIP: macsec: iproute2 too old"
return $ksft_skip
fi
ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: can't add macsec interface, skipping test"
return 1
fi
ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012
check_err $?
ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef"
check_err $?
ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef
check_err $?
ip macsec show > /dev/null
check_err $?
ip link del dev "$msname"
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: macsec"
return 1
fi
echo "PASS: macsec"
}
#-------------------------------------------------------------------
# Example commands
# ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
# spi 0x07 mode transport reqid 0x07 replay-window 32 \
# aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \
# sel src 14.0.0.52/24 dst 14.0.0.70/24
# ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \
# tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \
# spi 0x07 mode transport reqid 0x07
#
# Subcommands not tested
# ip x s update
# ip x s allocspi
# ip x s deleteall
# ip x p update
# ip x p deleteall
# ip x p set
#-------------------------------------------------------------------
kci_test_ipsec()
{
ret=0
algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
srcip=192.168.123.1
dstip=192.168.123.2
spi=7
ip addr add $srcip dev $devdummy
# flush to be sure there's nothing configured
ip x s flush ; ip x p flush
check_err $?
# start the monitor in the background
tmpfile=`mktemp /var/run/ipsectestXXX`
mpid=`(ip x m > $tmpfile & echo $!) 2>/dev/null`
sleep 0.2
ipsecid="proto esp src $srcip dst $dstip spi 0x07"
ip x s add $ipsecid \
mode transport reqid 0x07 replay-window 32 \
$algo sel src $srcip/24 dst $dstip/24
check_err $?
lines=`ip x s list | grep $srcip | grep $dstip | wc -l`
test $lines -eq 2
check_err $?
ip x s count | grep -q "SAD count 1"
check_err $?
lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l`
test $lines -eq 2
check_err $?
ip x s delete $ipsecid
check_err $?
lines=`ip x s list | wc -l`
test $lines -eq 0
check_err $?
ipsecsel="dir out src $srcip/24 dst $dstip/24"
ip x p add $ipsecsel \
tmpl proto esp src $srcip dst $dstip \
spi 0x07 mode transport reqid 0x07
check_err $?
lines=`ip x p list | grep $srcip | grep $dstip | wc -l`
test $lines -eq 2
check_err $?
ip x p count | grep -q "SPD IN 0 OUT 1 FWD 0"
check_err $?
lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l`
test $lines -eq 2
check_err $?
ip x p delete $ipsecsel
check_err $?
lines=`ip x p list | wc -l`
test $lines -eq 0
check_err $?
# check the monitor results
kill $mpid
lines=`wc -l $tmpfile | cut "-d " -f1`
test $lines -eq 20
check_err $?
rm -rf $tmpfile
# clean up any leftovers
ip x s flush
check_err $?
ip x p flush
check_err $?
ip addr del $srcip/32 dev $devdummy
if [ $ret -ne 0 ]; then
echo "FAIL: ipsec"
return 1
fi
echo "PASS: ipsec"
}
#-------------------------------------------------------------------
# Example commands
# ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
# spi 0x07 mode transport reqid 0x07 replay-window 32 \
# aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \
# sel src 14.0.0.52/24 dst 14.0.0.70/24
# offload dev sim1 dir out
# ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \
# tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \
# spi 0x07 mode transport reqid 0x07
#
#-------------------------------------------------------------------
kci_test_ipsec_offload()
{
ret=0
algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
srcip=192.168.123.3
dstip=192.168.123.4
sysfsd=/sys/kernel/debug/netdevsim/netdevsim0/ports/0/
sysfsf=$sysfsd/ipsec
sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
probed=false
# setup netdevsim since dummydev doesn't have offload support
if [ ! -w /sys/bus/netdevsim/new_device ] ; then
modprobe -q netdevsim
check_err $?
if [ $ret -ne 0 ]; then
echo "SKIP: ipsec_offload can't load netdevsim"
return $ksft_skip
fi
probed=true
fi
echo "0" > /sys/bus/netdevsim/new_device
while [ ! -d $sysfsnet ] ; do :; done
udevadm settle
dev=`ls $sysfsnet`
ip addr add $srcip dev $dev
ip link set $dev up
if [ ! -d $sysfsd ] ; then
echo "FAIL: ipsec_offload can't create device $dev"
return 1
fi
if [ ! -f $sysfsf ] ; then
echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
return 1
fi
# flush to be sure there's nothing configured
ip x s flush ; ip x p flush
# create offloaded SAs, both in and out
ip x p add dir out src $srcip/24 dst $dstip/24 \
tmpl proto esp src $srcip dst $dstip spi 9 \
mode transport reqid 42
check_err $?
ip x p add dir out src $dstip/24 dst $srcip/24 \
tmpl proto esp src $dstip dst $srcip spi 9 \
mode transport reqid 42
check_err $?
ip x s add proto esp src $srcip dst $dstip spi 9 \
mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \
offload dev $dev dir out
check_err $?
ip x s add proto esp src $dstip dst $srcip spi 9 \
mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \
offload dev $dev dir in
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: ipsec_offload can't create SA"
return 1
fi
# does offload show up in ip output
lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"`
if [ $lines -ne 2 ] ; then
echo "FAIL: ipsec_offload SA offload missing from list output"
check_err 1
fi
# use ping to exercise the Tx path
ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null
# does driver have correct offload info
diff $sysfsf - << EOF
SA count=2 tx=3
sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000
sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
sa[0] key=0x34333231 38373635 32313039 36353433
sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
sa[1] key=0x34333231 38373635 32313039 36353433
EOF
if [ $? -ne 0 ] ; then
echo "FAIL: ipsec_offload incorrect driver data"
check_err 1
fi
# does offload get removed from driver
ip x s flush
ip x p flush
lines=`grep -c "SA count=0" $sysfsf`
if [ $lines -ne 1 ] ; then
echo "FAIL: ipsec_offload SA not removed from driver"
check_err 1
fi
# clean up any leftovers
$probed && rmmod netdevsim
if [ $ret -ne 0 ]; then
echo "FAIL: ipsec_offload"
return 1
fi
echo "PASS: ipsec_offload"
}
kci_test_gretap()
{
testns="testns"
DEV_NS=gretap00
ret=0
ip netns add "$testns"
if [ $? -ne 0 ]; then
echo "SKIP gretap tests: cannot add net namespace $testns"
return $ksft_skip
fi
ip link help gretap 2>&1 | grep -q "^Usage:"
if [ $? -ne 0 ];then
echo "SKIP: gretap: iproute2 too old"
ip netns del "$testns"
return $ksft_skip
fi
# test native tunnel
ip -netns "$testns" link add dev "$DEV_NS" type gretap seq \
key 102 local 172.16.1.100 remote 172.16.1.200
check_err $?
ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
check_err $?
ip -netns "$testns" link set dev $DEV_NS up
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
# test external mode
ip -netns "$testns" link add dev "$DEV_NS" type gretap external
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: gretap"
ip netns del "$testns"
return 1
fi
echo "PASS: gretap"
ip netns del "$testns"
}
kci_test_ip6gretap()
{
testns="testns"
DEV_NS=ip6gretap00
ret=0
ip netns add "$testns"
if [ $? -ne 0 ]; then
echo "SKIP ip6gretap tests: cannot add net namespace $testns"
return $ksft_skip
fi
ip link help ip6gretap 2>&1 | grep -q "^Usage:"
if [ $? -ne 0 ];then
echo "SKIP: ip6gretap: iproute2 too old"
ip netns del "$testns"
return $ksft_skip
fi
# test native tunnel
ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap seq \
key 102 local fc00:100::1 remote fc00:100::2
check_err $?
ip -netns "$testns" addr add dev "$DEV_NS" fc00:200::1/96
check_err $?
ip -netns "$testns" link set dev $DEV_NS up
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
# test external mode
ip -netns "$testns" link add dev "$DEV_NS" type ip6gretap external
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: ip6gretap"
ip netns del "$testns"
return 1
fi
echo "PASS: ip6gretap"
ip netns del "$testns"
}
kci_test_erspan()
{
testns="testns"
DEV_NS=erspan00
ret=0
ip link help erspan 2>&1 | grep -q "^Usage:"
if [ $? -ne 0 ];then
echo "SKIP: erspan: iproute2 too old"
return $ksft_skip
fi
ip netns add "$testns"
if [ $? -ne 0 ]; then
echo "SKIP erspan tests: cannot add net namespace $testns"
return $ksft_skip
fi
# test native tunnel erspan v1
ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
key 102 local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 1 erspan 488
check_err $?
ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
check_err $?
ip -netns "$testns" link set dev $DEV_NS up
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
# test native tunnel erspan v2
ip -netns "$testns" link add dev "$DEV_NS" type erspan seq \
key 102 local 172.16.1.100 remote 172.16.1.200 \
erspan_ver 2 erspan_dir ingress erspan_hwid 7
check_err $?
ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
check_err $?
ip -netns "$testns" link set dev $DEV_NS up
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
# test external mode
ip -netns "$testns" link add dev "$DEV_NS" type erspan external
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: erspan"
ip netns del "$testns"
return 1
fi
echo "PASS: erspan"
ip netns del "$testns"
}
kci_test_ip6erspan()
{
testns="testns"
DEV_NS=ip6erspan00
ret=0
ip link help ip6erspan 2>&1 | grep -q "^Usage:"
if [ $? -ne 0 ];then
echo "SKIP: ip6erspan: iproute2 too old"
return $ksft_skip
fi
ip netns add "$testns"
if [ $? -ne 0 ]; then
echo "SKIP ip6erspan tests: cannot add net namespace $testns"
return $ksft_skip
fi
# test native tunnel ip6erspan v1
ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
key 102 local fc00:100::1 remote fc00:100::2 \
erspan_ver 1 erspan 488
check_err $?
ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
check_err $?
ip -netns "$testns" link set dev $DEV_NS up
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
# test native tunnel ip6erspan v2
ip -netns "$testns" link add dev "$DEV_NS" type ip6erspan seq \
key 102 local fc00:100::1 remote fc00:100::2 \
erspan_ver 2 erspan_dir ingress erspan_hwid 7
check_err $?
ip -netns "$testns" addr add dev "$DEV_NS" 10.1.1.100/24
check_err $?
ip -netns "$testns" link set dev $DEV_NS up
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
# test external mode
ip -netns "$testns" link add dev "$DEV_NS" \
type ip6erspan external
check_err $?
ip -netns "$testns" link del "$DEV_NS"
check_err $?
if [ $ret -ne 0 ]; then
echo "FAIL: ip6erspan"
ip netns del "$testns"
return 1
fi
echo "PASS: ip6erspan"
ip netns del "$testns"
}
kci_test_fdb_get()
{
IP="ip -netns testns"
BRIDGE="bridge -netns testns"
brdev="test-br0"
vxlandev="vxlan10"
test_mac=de:ad:be:ef:13:37
localip="10.0.2.2"
dstip="10.0.2.3"
ret=0
bridge fdb help 2>&1 |grep -q 'bridge fdb get'
if [ $? -ne 0 ];then
echo "SKIP: fdb get tests: iproute2 too old"
return $ksft_skip
fi
ip netns add testns
if [ $? -ne 0 ]; then
echo "SKIP fdb get tests: cannot add net namespace $testns"
return $ksft_skip
fi
$IP link add "$vxlandev" type vxlan id 10 local $localip \
dstport 4789 2>/dev/null
check_err $?
$IP link add name "$brdev" type bridge &>/dev/null
check_err $?
$IP link set dev "$vxlandev" master "$brdev" &>/dev/null
check_err $?
$BRIDGE fdb add $test_mac dev "$vxlandev" master &>/dev/null
check_err $?
$BRIDGE fdb add $test_mac dev "$vxlandev" dst $dstip self &>/dev/null
check_err $?
$BRIDGE fdb get $test_mac brport "$vxlandev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
check_err $?
$BRIDGE fdb get $test_mac br "$brdev" 2>/dev/null | grep -q "dev $vxlandev master $brdev"
check_err $?
$BRIDGE fdb get $test_mac dev "$vxlandev" self 2>/dev/null | grep -q "dev $vxlandev dst $dstip"
check_err $?
ip netns del testns &>/dev/null
if [ $ret -ne 0 ]; then
echo "FAIL: bridge fdb get"
return 1
fi
echo "PASS: bridge fdb get"
}
kci_test_neigh_get()
{
dstmac=de:ad:be:ef:13:37
dstip=10.0.2.4
dstip6=dead::2
ret=0
ip neigh help 2>&1 |grep -q 'ip neigh get'
if [ $? -ne 0 ];then
echo "SKIP: fdb get tests: iproute2 too old"
return $ksft_skip
fi
# ipv4
ip neigh add $dstip lladdr $dstmac dev "$devdummy" > /dev/null
check_err $?
ip neigh get $dstip dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
check_err $?
ip neigh del $dstip lladdr $dstmac dev "$devdummy" > /dev/null
check_err $?
# ipv4 proxy
ip neigh add proxy $dstip dev "$devdummy" > /dev/null
check_err $?
ip neigh get proxy $dstip dev "$devdummy" 2>/dev/null | grep -q "$dstip"
check_err $?
ip neigh del proxy $dstip dev "$devdummy" > /dev/null
check_err $?
# ipv6
ip neigh add $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null
check_err $?
ip neigh get $dstip6 dev "$devdummy" 2> /dev/null | grep -q "$dstmac"
check_err $?
ip neigh del $dstip6 lladdr $dstmac dev "$devdummy" > /dev/null
check_err $?
# ipv6 proxy
ip neigh add proxy $dstip6 dev "$devdummy" > /dev/null
check_err $?
ip neigh get proxy $dstip6 dev "$devdummy" 2>/dev/null | grep -q "$dstip6"
check_err $?
ip neigh del proxy $dstip6 dev "$devdummy" > /dev/null
check_err $?
if [ $ret -ne 0 ];then
echo "FAIL: neigh get"
return 1
fi
echo "PASS: neigh get"
}
kci_test_rtnl()
{
kci_add_dummy
if [ $ret -ne 0 ];then
echo "FAIL: cannot add dummy interface"
return 1
fi
kci_test_polrouting
kci_test_route_get
kci_test_addrlft
kci_test_promote_secondaries
kci_test_tc
kci_test_gre
kci_test_gretap
kci_test_ip6gretap
kci_test_erspan
kci_test_ip6erspan
kci_test_bridge
kci_test_addrlabel
kci_test_ifalias
kci_test_vrf
kci_test_encap
kci_test_macsec
kci_test_ipsec
kci_test_ipsec_offload
kci_test_fdb_get
kci_test_neigh_get
kci_del_dummy
}
#check for needed privileges
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
exit $ksft_skip
fi
for x in ip tc;do
$x -Version 2>/dev/null >/dev/null
if [ $? -ne 0 ];then
echo "SKIP: Could not run test without the $x tool"
exit $ksft_skip
fi
done
kci_test_rtnl
exit $ret