// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2011 Linaro Ltd. */ #include <linux/io.h> #include <linux/irq.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include "common.h" #include "hardware.h" static void __init imx51_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX51); } /* * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by * the Freescale marketing division. However this did not remove the * hardware from the chip which still needs to be configured for proper * IPU support. */ #define MX51_MIPI_HSC_BASE 0x83fdc000 static void __init imx51_ipu_mipi_setup(void) { void __iomem *hsc_addr; hsc_addr = ioremap(MX51_MIPI_HSC_BASE, SZ_16K); WARN_ON(!hsc_addr); /* setup MIPI module to legacy mode */ imx_writel(0xf00, hsc_addr); /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800); iounmap(hsc_addr); } static void __init imx51_m4if_setup(void) { void __iomem *m4if_base; struct device_node *np; np = of_find_compatible_node(NULL, NULL, "fsl,imx51-m4if"); if (!np) return; m4if_base = of_iomap(np, 0); of_node_put(np); if (!m4if_base) { pr_err("Unable to map M4IF registers\n"); return; } /* * Configure VPU and IPU with higher priorities * in order to avoid artifacts during video playback */ writel_relaxed(0x00000203, m4if_base + 0x40); writel_relaxed(0x00000000, m4if_base + 0x44); writel_relaxed(0x00120125, m4if_base + 0x9c); writel_relaxed(0x001901A3, m4if_base + 0x48); iounmap(m4if_base); } static void __init imx51_dt_init(void) { imx51_ipu_mipi_setup(); imx_src_init(); imx51_m4if_setup(); imx5_pmu_init(); imx_aips_allow_unprivileged_access("fsl,imx51-aipstz"); } static void __init imx51_init_late(void) { mx51_neon_fixup(); imx51_pm_init(); } static const char * const imx51_dt_board_compat[] __initconst = { "fsl,imx51", NULL }; DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .init_early = imx51_init_early, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, MACHINE_END |