Training courses
Kernel and Embedded Linux
Bootlin training courses
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118
/* SPDX-License-Identifier: GPL-2.0 */ #include <linux/bitops.h> #include <linux/device.h> #include <linux/regmap.h> /* BMP280 specific registers */ #define BMP280_REG_HUMIDITY_LSB 0xFE #define BMP280_REG_HUMIDITY_MSB 0xFD #define BMP280_REG_TEMP_XLSB 0xFC #define BMP280_REG_TEMP_LSB 0xFB #define BMP280_REG_TEMP_MSB 0xFA #define BMP280_REG_PRESS_XLSB 0xF9 #define BMP280_REG_PRESS_LSB 0xF8 #define BMP280_REG_PRESS_MSB 0xF7 #define BMP280_REG_CONFIG 0xF5 #define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 #define BMP280_REG_CTRL_HUMIDITY 0xF2 /* Due to non linear mapping, and data sizes we can't do a bulk read */ #define BMP280_REG_COMP_H1 0xA1 #define BMP280_REG_COMP_H2 0xE1 #define BMP280_REG_COMP_H3 0xE3 #define BMP280_REG_COMP_H4 0xE4 #define BMP280_REG_COMP_H5 0xE5 #define BMP280_REG_COMP_H6 0xE7 #define BMP280_REG_COMP_TEMP_START 0x88 #define BMP280_COMP_TEMP_REG_COUNT 6 #define BMP280_REG_COMP_PRESS_START 0x8E #define BMP280_COMP_PRESS_REG_COUNT 18 #define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2)) #define BMP280_FILTER_OFF 0 #define BMP280_FILTER_2X BIT(2) #define BMP280_FILTER_4X BIT(3) #define BMP280_FILTER_8X (BIT(3) | BIT(2)) #define BMP280_FILTER_16X BIT(4) #define BMP280_OSRS_HUMIDITY_MASK (BIT(2) | BIT(1) | BIT(0)) #define BMP280_OSRS_HUMIDITIY_X(osrs_h) ((osrs_h) << 0) #define BMP280_OSRS_HUMIDITY_SKIP 0 #define BMP280_OSRS_HUMIDITY_1X BMP280_OSRS_HUMIDITIY_X(1) #define BMP280_OSRS_HUMIDITY_2X BMP280_OSRS_HUMIDITIY_X(2) #define BMP280_OSRS_HUMIDITY_4X BMP280_OSRS_HUMIDITIY_X(3) #define BMP280_OSRS_HUMIDITY_8X BMP280_OSRS_HUMIDITIY_X(4) #define BMP280_OSRS_HUMIDITY_16X BMP280_OSRS_HUMIDITIY_X(5) #define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) #define BMP280_OSRS_TEMP_SKIP 0 #define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) #define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1) #define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2) #define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3) #define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4) #define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5) #define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2)) #define BMP280_OSRS_PRESS_SKIP 0 #define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2) #define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1) #define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2) #define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3) #define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4) #define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5) #define BMP280_MODE_MASK (BIT(1) | BIT(0)) #define BMP280_MODE_SLEEP 0 #define BMP280_MODE_FORCED BIT(0) #define BMP280_MODE_NORMAL (BIT(1) | BIT(0)) /* BMP180 specific registers */ #define BMP180_REG_OUT_XLSB 0xF8 #define BMP180_REG_OUT_LSB 0xF7 #define BMP180_REG_OUT_MSB 0xF6 #define BMP180_REG_CALIB_START 0xAA #define BMP180_REG_CALIB_COUNT 22 #define BMP180_MEAS_SCO BIT(5) #define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO) #define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO) #define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0) #define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1) #define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2) #define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3) /* BMP180 and BMP280 common registers */ #define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_RESET 0xE0 #define BMP280_REG_ID 0xD0 #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 #define BME280_CHIP_ID 0x60 #define BMP280_SOFT_RESET_VAL 0xB6 /* BMP280 register skipped special values */ #define BMP280_TEMP_SKIPPED 0x80000 #define BMP280_PRESS_SKIPPED 0x80000 #define BMP280_HUMIDITY_SKIPPED 0x8000 /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev, struct regmap *regmap, unsigned int chip, const char *name, int irq); int bmp280_common_remove(struct device *dev); /* PM ops */ extern const struct dev_pm_ops bmp280_dev_pm_ops;