// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
*/
/* Qualcomm Technologies, Inc. QDF2432 EMAC SGMII Controller driver.
*/
#include <linux/iopoll.h>
#include "emac.h"
/* EMAC_SGMII register offsets */
#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
#define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
#define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
#define EMAC_SGMII_PHY_RESET_CTRL 0x00a8
#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
/* SGMII digital lane registers */
#define EMAC_SGMII_LN_DRVR_CTRL0 0x000C
#define EMAC_SGMII_LN_DRVR_TAP_EN 0x0018
#define EMAC_SGMII_LN_TX_MARGINING 0x001C
#define EMAC_SGMII_LN_TX_PRE 0x0020
#define EMAC_SGMII_LN_TX_POST 0x0024
#define EMAC_SGMII_LN_TX_BAND_MODE 0x0060
#define EMAC_SGMII_LN_LANE_MODE 0x0064
#define EMAC_SGMII_LN_PARALLEL_RATE 0x0078
#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x00B8
#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x00D0
#define EMAC_SGMII_LN_VGA_INITVAL 0x0134
#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x017C
#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x0188
#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x0194
#define EMAC_SGMII_LN_RX_BAND 0x019C
#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x01B8
#define EMAC_SGMII_LN_RSM_CONFIG 0x01F0
#define EMAC_SGMII_LN_SIGDET_ENABLES 0x0224
#define EMAC_SGMII_LN_SIGDET_CNTRL 0x0228
#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x022C
#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x02A0
#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x02AC
#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x02BC
/* SGMII digital lane register values */
#define UCDR_STEP_BY_TWO_MODE0 BIT(7)
#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
#define UCDR_ENABLE BIT(6)
#define UCDR_SO_SATURATION(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS4 BIT(7)
#define SIGDET_EN_PS0_TO_PS2 BIT(6)
#define TXVAL_VALID_INIT BIT(4)
#define KR_PCIGEN3_MODE BIT(0)
#define MAIN_EN BIT(0)
#define TX_MARGINING_MUX BIT(6)
#define TX_MARGINING(x) ((x) & 0x3f)
#define TX_PRE_MUX BIT(6)
#define TX_POST_MUX BIT(6)
#define CML_GEAR_MODE(x) (((x) & 7) << 3)
#define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
#define MIXER_DATARATE_MODE(x) ((x) & 3)
#define VGA_THRESH_DFE(x) ((x) & 0x3f)
#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
#define SIGDET_FLT_BYP BIT(0)
#define SIGDET_LVL(x) (((x) & 0xf) << 4)
#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
#define DRVR_LOGIC_CLK_EN BIT(4)
#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
#define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
#define BAND_MODE0(x) ((x) & 0x3)
#define LANE_MODE(x) ((x) & 0x1f)
#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
#define BYPASS_RSM_SAMP_CAL BIT(1)
#define BYPASS_RSM_DLL_CAL BIT(0)
#define L0_RX_EQUALIZE_ENABLE BIT(6)
#define PWRDN_B BIT(0)
#define CDR_MAX_CNT(x) ((x) & 0xff)
#define SERDES_START_WAIT_TIMES 100
struct emac_reg_write {
unsigned int offset;
u32 val;
};
static void emac_reg_write_all(void __iomem *base,
const struct emac_reg_write *itr, size_t size)
{
size_t i;
for (i = 0; i < size; ++itr, ++i)
writel(itr->val, base + itr->offset);
}
static const struct emac_reg_write sgmii_laned[] = {
/* CDR Settings */
{EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0,
UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)},
{EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)},
{EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)},
/* TX/RX Settings */
{EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2},
{EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE},
{EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN},
{EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)},
{EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX},
{EMAC_SGMII_LN_TX_POST, TX_POST_MUX},
{EMAC_SGMII_LN_CML_CTRL_MODE0,
CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
{EMAC_SGMII_LN_MIXER_CTRL_MODE0,
MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
{EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)},
{EMAC_SGMII_LN_SIGDET_ENABLES,
SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP},
{EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)},
{EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)},
{EMAC_SGMII_LN_RX_MISC_CNTRL0, 0},
{EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV,
DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)},
{EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)},
{EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)},
{EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)},
{EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)},
{EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)},
{EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL},
};
static const struct emac_reg_write physical_coding_sublayer_programming[] = {
{EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B},
{EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)},
{EMAC_SGMII_PHY_TX_PWR_CTRL, 0},
{EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE},
};
int emac_sgmii_init_qdf2432(struct emac_adapter *adpt)
{
struct emac_sgmii *phy = &adpt->phy;
void __iomem *phy_regs = phy->base;
void __iomem *laned = phy->digital;
unsigned int i;
u32 lnstatus;
/* PCS lane-x init */
emac_reg_write_all(phy->base, physical_coding_sublayer_programming,
ARRAY_SIZE(physical_coding_sublayer_programming));
/* SGMII lane-x init */
emac_reg_write_all(phy->digital, sgmii_laned, ARRAY_SIZE(sgmii_laned));
/* Power up PCS and start reset lane state machine */
writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL);
writel(1, laned + SGMII_LN_RSM_START);
/* Wait for c_ready assertion */
for (i = 0; i < SERDES_START_WAIT_TIMES; i++) {
lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS);
if (lnstatus & BIT(1))
break;
usleep_range(100, 200);
}
if (i == SERDES_START_WAIT_TIMES) {
netdev_err(adpt->netdev, "SGMII failed to start\n");
return -EIO;
}
/* Disable digital and SERDES loopback */
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0);
writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2);
writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1);
/* Mask out all the SGMII Interrupt */
writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK);
return 0;
}