// SPDX-License-Identifier: GPL-2.0-only
/*
* Mac80211 power management API for ST-Ericsson CW1200 drivers
*
* Copyright (c) 2011, ST-Ericsson
* Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
*/
#include <linux/module.h>
#include <linux/if_ether.h>
#include "cw1200.h"
#include "pm.h"
#include "sta.h"
#include "bh.h"
#include "hwbus.h"
#define CW1200_BEACON_SKIPPING_MULTIPLIER 3
struct cw1200_udp_port_filter {
struct wsm_udp_port_filter_hdr hdr;
/* Up to 4 filters are allowed. */
struct wsm_udp_port_filter filters[WSM_MAX_FILTER_ELEMENTS];
} __packed;
struct cw1200_ether_type_filter {
struct wsm_ether_type_filter_hdr hdr;
/* Up to 4 filters are allowed. */
struct wsm_ether_type_filter filters[WSM_MAX_FILTER_ELEMENTS];
} __packed;
static struct cw1200_udp_port_filter cw1200_udp_port_filter_on = {
.hdr.num = 2,
.filters = {
[0] = {
.action = WSM_FILTER_ACTION_FILTER_OUT,
.type = WSM_FILTER_PORT_TYPE_DST,
.port = __cpu_to_le16(67), /* DHCP Bootps */
},
[1] = {
.action = WSM_FILTER_ACTION_FILTER_OUT,
.type = WSM_FILTER_PORT_TYPE_DST,
.port = __cpu_to_le16(68), /* DHCP Bootpc */
},
}
};
static struct wsm_udp_port_filter_hdr cw1200_udp_port_filter_off = {
.num = 0,
};
#ifndef ETH_P_WAPI
#define ETH_P_WAPI 0x88B4
#endif
static struct cw1200_ether_type_filter cw1200_ether_type_filter_on = {
.hdr.num = 4,
.filters = {
[0] = {
.action = WSM_FILTER_ACTION_FILTER_IN,
.type = __cpu_to_le16(ETH_P_IP),
},
[1] = {
.action = WSM_FILTER_ACTION_FILTER_IN,
.type = __cpu_to_le16(ETH_P_PAE),
},
[2] = {
.action = WSM_FILTER_ACTION_FILTER_IN,
.type = __cpu_to_le16(ETH_P_WAPI),
},
[3] = {
.action = WSM_FILTER_ACTION_FILTER_IN,
.type = __cpu_to_le16(ETH_P_ARP),
},
},
};
static struct wsm_ether_type_filter_hdr cw1200_ether_type_filter_off = {
.num = 0,
};
/* private */
struct cw1200_suspend_state {
unsigned long bss_loss_tmo;
unsigned long join_tmo;
unsigned long direct_probe;
unsigned long link_id_gc;
bool beacon_skipping;
u8 prev_ps_mode;
};
static void cw1200_pm_stay_awake_tmo(struct timer_list *unused)
{
/* XXX what's the point of this ? */
}
int cw1200_pm_init(struct cw1200_pm_state *pm,
struct cw1200_common *priv)
{
spin_lock_init(&pm->lock);
timer_setup(&pm->stay_awake, cw1200_pm_stay_awake_tmo, 0);
return 0;
}
void cw1200_pm_deinit(struct cw1200_pm_state *pm)
{
del_timer_sync(&pm->stay_awake);
}
void cw1200_pm_stay_awake(struct cw1200_pm_state *pm,
unsigned long tmo)
{
long cur_tmo;
spin_lock_bh(&pm->lock);
cur_tmo = pm->stay_awake.expires - jiffies;
if (!timer_pending(&pm->stay_awake) || cur_tmo < (long)tmo)
mod_timer(&pm->stay_awake, jiffies + tmo);
spin_unlock_bh(&pm->lock);
}
static long cw1200_suspend_work(struct delayed_work *work)
{
int ret = cancel_delayed_work(work);
long tmo;
if (ret > 0) {
/* Timer is pending */
tmo = work->timer.expires - jiffies;
if (tmo < 0)
tmo = 0;
} else {
tmo = -1;
}
return tmo;
}
static int cw1200_resume_work(struct cw1200_common *priv,
struct delayed_work *work,
unsigned long tmo)
{
if ((long)tmo < 0)
return 1;
return queue_delayed_work(priv->workqueue, work, tmo);
}
int cw1200_can_suspend(struct cw1200_common *priv)
{
if (atomic_read(&priv->bh_rx)) {
wiphy_dbg(priv->hw->wiphy, "Suspend interrupted.\n");
return 0;
}
return 1;
}
EXPORT_SYMBOL_GPL(cw1200_can_suspend);
int cw1200_wow_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
{
struct cw1200_common *priv = hw->priv;
struct cw1200_pm_state *pm_state = &priv->pm_state;
struct cw1200_suspend_state *state;
int ret;
spin_lock_bh(&pm_state->lock);
ret = timer_pending(&pm_state->stay_awake);
spin_unlock_bh(&pm_state->lock);
if (ret)
return -EAGAIN;
/* Do not suspend when datapath is not idle */
if (priv->tx_queue_stats.num_queued)
return -EBUSY;
/* Make sure there is no configuration requests in progress. */
if (!mutex_trylock(&priv->conf_mutex))
return -EBUSY;
/* Ensure pending operations are done.
* Note also that wow_suspend must return in ~2.5sec, before
* watchdog is triggered.
*/
if (priv->channel_switch_in_progress)
goto revert1;
/* Do not suspend when join is pending */
if (priv->join_pending)
goto revert1;
/* Do not suspend when scanning */
if (down_trylock(&priv->scan.lock))
goto revert1;
/* Lock TX. */
wsm_lock_tx_async(priv);
/* Wait to avoid possible race with bh code.
* But do not wait too long...
*/
if (wait_event_timeout(priv->bh_evt_wq,
!priv->hw_bufs_used, HZ / 10) <= 0)
goto revert2;
/* Set UDP filter */
wsm_set_udp_port_filter(priv, &cw1200_udp_port_filter_on.hdr);
/* Set ethernet frame type filter */
wsm_set_ether_type_filter(priv, &cw1200_ether_type_filter_on.hdr);
/* Allocate state */
state = kzalloc(sizeof(struct cw1200_suspend_state), GFP_KERNEL);
if (!state)
goto revert3;
/* Change to legacy PS while going to suspend */
if (!priv->vif->p2p &&
priv->join_status == CW1200_JOIN_STATUS_STA &&
priv->powersave_mode.mode != WSM_PSM_PS) {
state->prev_ps_mode = priv->powersave_mode.mode;
priv->powersave_mode.mode = WSM_PSM_PS;
cw1200_set_pm(priv, &priv->powersave_mode);
if (wait_event_interruptible_timeout(priv->ps_mode_switch_done,
!priv->ps_mode_switch_in_progress, 1*HZ) <= 0) {
goto revert4;
}
}
/* Store delayed work states. */
state->bss_loss_tmo =
cw1200_suspend_work(&priv->bss_loss_work);
state->join_tmo =
cw1200_suspend_work(&priv->join_timeout);
state->direct_probe =
cw1200_suspend_work(&priv->scan.probe_work);
state->link_id_gc =
cw1200_suspend_work(&priv->link_id_gc_work);
cancel_delayed_work_sync(&priv->clear_recent_scan_work);
atomic_set(&priv->recent_scan, 0);
/* Enable beacon skipping */
if (priv->join_status == CW1200_JOIN_STATUS_STA &&
priv->join_dtim_period &&
!priv->has_multicast_subscription) {
state->beacon_skipping = true;
wsm_set_beacon_wakeup_period(priv,
priv->join_dtim_period,
CW1200_BEACON_SKIPPING_MULTIPLIER * priv->join_dtim_period);
}
/* Stop serving thread */
if (cw1200_bh_suspend(priv))
goto revert5;
ret = timer_pending(&priv->mcast_timeout);
if (ret)
goto revert6;
/* Store suspend state */
pm_state->suspend_state = state;
/* Enable IRQ wake */
ret = priv->hwbus_ops->power_mgmt(priv->hwbus_priv, true);
if (ret) {
wiphy_err(priv->hw->wiphy,
"PM request failed: %d. WoW is disabled.\n", ret);
cw1200_wow_resume(hw);
return -EBUSY;
}
/* Force resume if event is coming from the device. */
if (atomic_read(&priv->bh_rx)) {
cw1200_wow_resume(hw);
return -EAGAIN;
}
return 0;
revert6:
WARN_ON(cw1200_bh_resume(priv));
revert5:
cw1200_resume_work(priv, &priv->bss_loss_work,
state->bss_loss_tmo);
cw1200_resume_work(priv, &priv->join_timeout,
state->join_tmo);
cw1200_resume_work(priv, &priv->scan.probe_work,
state->direct_probe);
cw1200_resume_work(priv, &priv->link_id_gc_work,
state->link_id_gc);
revert4:
kfree(state);
revert3:
wsm_set_udp_port_filter(priv, &cw1200_udp_port_filter_off);
wsm_set_ether_type_filter(priv, &cw1200_ether_type_filter_off);
revert2:
wsm_unlock_tx(priv);
up(&priv->scan.lock);
revert1:
mutex_unlock(&priv->conf_mutex);
return -EBUSY;
}
int cw1200_wow_resume(struct ieee80211_hw *hw)
{
struct cw1200_common *priv = hw->priv;
struct cw1200_pm_state *pm_state = &priv->pm_state;
struct cw1200_suspend_state *state;
state = pm_state->suspend_state;
pm_state->suspend_state = NULL;
/* Disable IRQ wake */
priv->hwbus_ops->power_mgmt(priv->hwbus_priv, false);
/* Scan.lock must be released before BH is resumed other way
* in case when BSS_LOST command arrived the processing of the
* command will be delayed.
*/
up(&priv->scan.lock);
/* Resume BH thread */
WARN_ON(cw1200_bh_resume(priv));
/* Restores previous PS mode */
if (!priv->vif->p2p && priv->join_status == CW1200_JOIN_STATUS_STA) {
priv->powersave_mode.mode = state->prev_ps_mode;
cw1200_set_pm(priv, &priv->powersave_mode);
}
if (state->beacon_skipping) {
wsm_set_beacon_wakeup_period(priv, priv->beacon_int *
priv->join_dtim_period >
MAX_BEACON_SKIP_TIME_MS ? 1 :
priv->join_dtim_period, 0);
state->beacon_skipping = false;
}
/* Resume delayed work */
cw1200_resume_work(priv, &priv->bss_loss_work,
state->bss_loss_tmo);
cw1200_resume_work(priv, &priv->join_timeout,
state->join_tmo);
cw1200_resume_work(priv, &priv->scan.probe_work,
state->direct_probe);
cw1200_resume_work(priv, &priv->link_id_gc_work,
state->link_id_gc);
/* Remove UDP port filter */
wsm_set_udp_port_filter(priv, &cw1200_udp_port_filter_off);
/* Remove ethernet frame type filter */
wsm_set_ether_type_filter(priv, &cw1200_ether_type_filter_off);
/* Unlock datapath */
wsm_unlock_tx(priv);
/* Unlock configuration mutex */
mutex_unlock(&priv->conf_mutex);
/* Free memory */
kfree(state);
return 0;
}