# SPDX-License-Identifier: GPL-2.0-only
#
# Multimedia Video device configuration
#
if [31mCONFIG_VIDEO_V4L2[0m
config [31mCONFIG_VIDEO_IR_I2C[0m
tristate "I2C module for IR" if ![31mCONFIG_MEDIA_SUBDRV_AUTOSELECT[0m || [31mCONFIG_EXPERT[0m
depends on [31mCONFIG_I2C[0m && [31mCONFIG_RC_CORE[0m
default y
help
Most boards have an IR chip directly connected via GPIO. However,
some video boards have the IR connected via [31mCONFIG_I2C[0m bus.
If your board doesn't have an [31mCONFIG_I2C[0m IR chip, you may disable this
option.
In doubt, say Y.
#
# Encoder / Decoder module configuration
#
comment "I2C drivers hidden by 'Autoselect ancillary drivers'"
depends on [31mCONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV[0m
menu "I2C Encoders, decoders, sensors and other helper chips"
visible if ![31mCONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV[0m
comment "Audio decoders, processors and mixers"
config [31mCONFIG_VIDEO_TVAUDIO[0m
tristate "Simple audio decoder chips"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
tea6320, tea6420, tda8425, ta8874z.
Microchip: pic16c54 based design on ProVideo PV951 board.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvaudio.
config [31mCONFIG_VIDEO_TDA7432[0m
tristate "Philips TDA7432 audio processor"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for tda7432 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tda7432.
config [31mCONFIG_VIDEO_TDA9840[0m
tristate "Philips TDA9840 audio processor"
depends on [31mCONFIG_I2C[0m
help
Support for tda9840 audio decoder chip found on some Zoran boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tda9840.
config [31mCONFIG_VIDEO_TDA1997X[0m
tristate "NXP TDA1997x HDMI receiver"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_SND_SOC[0m
select [31mCONFIG_HDMI[0m
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
V4L2 subdevice driver for the NXP TDA1997x [31mCONFIG_HDMI[0m receivers.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tda1997x.
config [31mCONFIG_VIDEO_TEA6415C[0m
tristate "Philips TEA6415C audio processor"
depends on [31mCONFIG_I2C[0m
help
Support for tea6415c audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tea6415c.
config [31mCONFIG_VIDEO_TEA6420[0m
tristate "Philips TEA6420 audio processor"
depends on [31mCONFIG_I2C[0m
help
Support for tea6420 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tea6420.
config [31mCONFIG_VIDEO_MSP3400[0m
tristate "Micronas MSP34xx audio decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Micronas MSP34xx series of audio decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called msp3400.
config [31mCONFIG_VIDEO_CS3308[0m
tristate "Cirrus Logic CS3308 audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Cirrus Logic CS3308 High Performance 8-Channel
Analog Volume Control
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cs3308.
config [31mCONFIG_VIDEO_CS5345[0m
tristate "Cirrus Logic CS5345 audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m converter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cs5345.
config [31mCONFIG_VIDEO_CS53L32A[0m
tristate "Cirrus Logic CS53L32A audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Cirrus Logic CS53L32A low voltage
stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m converter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called cs53l32a.
config [31mCONFIG_VIDEO_TLV320AIC23B[0m
tristate "Texas Instruments TLV320AIC23B audio codec"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Texas Instruments TLV320AIC23B audio codec.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tlv320aic23b.
config [31mCONFIG_VIDEO_UDA1342[0m
tristate "Philips UDA1342 audio codec"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Philips UDA1342 audio codec.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called uda1342.
config [31mCONFIG_VIDEO_WM8775[0m
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Wolfson Microelectronics WM8775 high
performance stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m Converter with a 4 channel input mixer.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called wm8775.
config [31mCONFIG_VIDEO_WM8739[0m
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Wolfson Microelectronics WM8739
stereo [31mCONFIG_A[0m/[31mCONFIG_D[0m Converter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called wm8739.
config [31mCONFIG_VIDEO_VP27SMPX[0m
tristate "Panasonic VP27's internal MPX"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called vp27smpx.
config [31mCONFIG_VIDEO_SONY_BTF_MPX[0m
tristate "Sony BTF's internal MPX"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the internal MPX of the Sony BTF-PG472Z tuner.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called sony-btf-mpx.
comment "RDS decoders"
config [31mCONFIG_VIDEO_SAA6588[0m
tristate "SAA6588 Radio Chip RDS decoder support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for this Radio Data System ([31mCONFIG_RDS[0m) decoder. This allows
seeing radio station identification transmitted using this
standard.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa6588.
comment "Video decoders"
config [31mCONFIG_VIDEO_ADV7180[0m
tristate "Analog Devices ADV7180 decoder"
depends on [31mCONFIG_GPIOLIB[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
help
Support for the Analog Devices ADV7180 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7180.
config [31mCONFIG_VIDEO_ADV7183[0m
tristate "Analog Devices ADV7183 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
V4l2 subdevice driver for the Analog Devices
ADV7183 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7183.
config [31mCONFIG_VIDEO_ADV748X[0m
tristate "Analog Devices ADV748x decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_OF[0m
select [31mCONFIG_REGMAP_I2C[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
V4L2 subdevice driver for the Analog Devices
ADV7481 and ADV7482 [31mCONFIG_HDMI[0m/Analog video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv748x.
config [31mCONFIG_VIDEO_ADV7604[0m
tristate "Analog Devices ADV7604 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_GPIOLIB[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_HDMI[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
Support for the Analog Devices ADV7604 video decoder.
This is a Analog Devices Component/Graphics Digitizer
with 4:1 Multiplexed [31mCONFIG_HDMI[0m Receiver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7604.
config [31mCONFIG_VIDEO_ADV7604_CEC[0m
bool "Enable Analog Devices ADV7604 CEC support"
depends on [31mCONFIG_VIDEO_ADV7604[0m
select [31mCONFIG_CEC_CORE[0m
help
When selected the adv7604 will support the optional
[31mCONFIG_HDMI[0m CEC feature.
config [31mCONFIG_VIDEO_ADV7842[0m
tristate "Analog Devices ADV7842 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_HDMI[0m
help
Support for the Analog Devices ADV7842 video decoder.
This is a Analog Devices Component/Graphics/SD Digitizer
with 2:1 Multiplexed [31mCONFIG_HDMI[0m Receiver.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7842.
config [31mCONFIG_VIDEO_ADV7842_CEC[0m
bool "Enable Analog Devices ADV7842 CEC support"
depends on [31mCONFIG_VIDEO_ADV7842[0m
select [31mCONFIG_CEC_CORE[0m
help
When selected the adv7842 will support the optional
[31mCONFIG_HDMI[0m CEC feature.
config [31mCONFIG_VIDEO_BT819[0m
tristate "BT819A VideoStream decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for BT819A video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called bt819.
config [31mCONFIG_VIDEO_BT856[0m
tristate "BT856 VideoStream decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for BT856 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called bt856.
config [31mCONFIG_VIDEO_BT866[0m
tristate "BT866 VideoStream decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for BT866 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called bt866.
config [31mCONFIG_VIDEO_KS0127[0m
tristate "KS0127 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for KS0127 video decoder.
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
cards.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ks0127.
config [31mCONFIG_VIDEO_ML86V7667[0m
tristate "OKI ML86V7667 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the OKI Semiconductor ML86V7667 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ml86v7667.
config [31mCONFIG_VIDEO_SAA7110[0m
tristate "Philips SAA7110 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7110.
config [31mCONFIG_VIDEO_SAA711X[0m
tristate "Philips SAA7111/3/4/5 video decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Philips SAA7111/3/4/5 video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7115.
config [31mCONFIG_VIDEO_TC358743[0m
tristate "Toshiba TC358743 decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_HDMI[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
Support for the Toshiba TC358743 [31mCONFIG_HDMI[0m to MIPI CSI-2 bridge.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tc358743.
config [31mCONFIG_VIDEO_TC358743_CEC[0m
bool "Enable Toshiba TC358743 CEC support"
depends on [31mCONFIG_VIDEO_TC358743[0m
select [31mCONFIG_CEC_CORE[0m
help
When selected the tc358743 will support the optional
[31mCONFIG_HDMI[0m CEC feature.
config [31mCONFIG_VIDEO_TVP514X[0m
tristate "Texas Instruments TVP514x video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the TI TVP5146/47
decoder. It is currently working with the TI OMAP3 camera
controller.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvp514x.
config [31mCONFIG_VIDEO_TVP5150[0m
tristate "Texas Instruments TVP5150 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
Support for the Texas Instruments TVP5150 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvp5150.
config [31mCONFIG_VIDEO_TVP7002[0m
tristate "Texas Instruments TVP7002 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
Support for the Texas Instruments TVP7002 video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tvp7002.
config [31mCONFIG_VIDEO_TW2804[0m
tristate "Techwell TW2804 multiple video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Techwell tw2804 multiple video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tw2804.
config [31mCONFIG_VIDEO_TW9903[0m
tristate "Techwell TW9903 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Techwell tw9903 multi-standard video decoder
with high quality down scaler.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tw9903.
config [31mCONFIG_VIDEO_TW9906[0m
tristate "Techwell TW9906 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Techwell tw9906 enhanced multi-standard comb filter
video decoder with YCbCr input support.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tw9906.
config [31mCONFIG_VIDEO_TW9910[0m
tristate "Techwell TW9910 video decoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for Techwell TW9910 [31mCONFIG_NTSC[0m/[31mCONFIG_PAL[0m/SECAM video decoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called tw9910.
config [31mCONFIG_VIDEO_VPX3220[0m
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for VPX322x video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called vpx3220.
comment "Video and audio decoders"
config [31mCONFIG_VIDEO_SAA717X[0m
tristate "Philips SAA7171/3/4 audio/video decoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Philips SAA7171/3/4 audio/video decoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa717x.
source "drivers/media/i2c/cx25840/Kconfig"
comment "Video encoders"
config [31mCONFIG_VIDEO_SAA7127[0m
tristate "Philips SAA7127/9 digital video encoders"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7127.
config [31mCONFIG_VIDEO_SAA7185[0m
tristate "Philips SAA7185 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Philips SAA7185 video encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa7185.
config [31mCONFIG_VIDEO_ADV7170[0m
tristate "Analog Devices ADV7170 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Analog Devices ADV7170 video encoder driver
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7170.
config [31mCONFIG_VIDEO_ADV7175[0m
tristate "Analog Devices ADV7175 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7175.
config [31mCONFIG_VIDEO_ADV7343[0m
tristate "ADV7343 video encoder"
depends on [31mCONFIG_I2C[0m
help
Support for Analog Devices [31mCONFIG_I2C[0m bus based ADV7343 encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7343.
config [31mCONFIG_VIDEO_ADV7393[0m
tristate "ADV7393 video encoder"
depends on [31mCONFIG_I2C[0m
help
Support for Analog Devices [31mCONFIG_I2C[0m bus based ADV7393 encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7393.
config [31mCONFIG_VIDEO_ADV7511[0m
tristate "Analog Devices ADV7511 encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_DRM_I2C_ADV7511[0m=n || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_HDMI[0m
help
Support for the Analog Devices ADV7511 video encoder.
This is a Analog Devices [31mCONFIG_HDMI[0m transmitter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called adv7511.
config [31mCONFIG_VIDEO_ADV7511_CEC[0m
bool "Enable Analog Devices ADV7511 CEC support"
depends on [31mCONFIG_VIDEO_ADV7511[0m
select [31mCONFIG_CEC_CORE[0m
help
When selected the adv7511 will support the optional
[31mCONFIG_HDMI[0m CEC feature.
config [31mCONFIG_VIDEO_AD9389B[0m
tristate "Analog Devices AD9389B encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
help
Support for the Analog Devices AD9389B video encoder.
This is a Analog Devices [31mCONFIG_HDMI[0m transmitter.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ad9389b.
config [31mCONFIG_VIDEO_AK881X[0m
tristate "AK8813/AK8814 video encoders"
depends on [31mCONFIG_I2C[0m
help
Video output driver for AKM AK8813 and AK8814 TV encoders
config [31mCONFIG_VIDEO_THS8200[0m
tristate "Texas Instruments THS8200 video encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Texas Instruments THS8200 video encoder.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ths8200.
comment "Camera sensor devices"
config [31mCONFIG_VIDEO_APTINA_PLL[0m
tristate
config [31mCONFIG_VIDEO_SMIAPP_PLL[0m
tristate
config [31mCONFIG_VIDEO_IMX214[0m
tristate "Sony IMX214 sensor support"
depends on [31mCONFIG_GPIOLIB[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
depends on [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the Sony
IMX214 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called imx214.
config [31mCONFIG_VIDEO_IMX258[0m
tristate "Sony IMX258 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the Sony
IMX258 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called imx258.
config [31mCONFIG_VIDEO_IMX274[0m
tristate "Sony IMX274 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_I2C[0m
help
This is a V4L2 sensor driver for the Sony IMX274
CMOS image sensor.
config [31mCONFIG_VIDEO_IMX319[0m
tristate "Sony IMX319 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the Sony
IMX319 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called imx319.
config [31mCONFIG_VIDEO_IMX355[0m
tristate "Sony IMX355 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the Sony
IMX355 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called imx355.
config [31mCONFIG_VIDEO_OV2640[0m
tristate "OmniVision OV2640 sensor support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV2640 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov2640.
config [31mCONFIG_VIDEO_OV2659[0m
tristate "OmniVision OV2659 sensor support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV2659 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov2659.
config [31mCONFIG_VIDEO_OV2680[0m
tristate "OmniVision OV2680 sensor support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV2680 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov2680.
config [31mCONFIG_VIDEO_OV2685[0m
tristate "OmniVision OV2685 sensor support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV2685 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov2685.
config [31mCONFIG_VIDEO_OV5640[0m
tristate "OmniVision OV5640 sensor support"
depends on [31mCONFIG_OF[0m
depends on [31mCONFIG_GPIOLIB[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the Omnivision
OV5640 camera sensor with a MIPI CSI-2 interface.
config [31mCONFIG_VIDEO_OV5645[0m
tristate "OmniVision OV5645 sensor support"
depends on [31mCONFIG_OF[0m
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV5645 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov5645.
config [31mCONFIG_VIDEO_OV5647[0m
tristate "OmniVision OV5647 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV5647 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov5647.
config [31mCONFIG_VIDEO_OV6650[0m
tristate "OmniVision OV6650 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV6650 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov6650.
config [31mCONFIG_VIDEO_OV5670[0m
tristate "OmniVision OV5670 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
depends on [31mCONFIG_MEDIA_CONTROLLER[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV5670 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov5670.
config [31mCONFIG_VIDEO_OV5675[0m
tristate "OmniVision OV5675 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
depends on [31mCONFIG_MEDIA_CONTROLLER[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV5675 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov5675.
config [31mCONFIG_VIDEO_OV5695[0m
tristate "OmniVision OV5695 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV5695 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov5695.
config [31mCONFIG_VIDEO_OV7251[0m
tristate "OmniVision OV7251 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7251 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov7251.
config [31mCONFIG_VIDEO_OV772X[0m
tristate "OmniVision OV772x sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_SCCB[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV772x camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov772x.
config [31mCONFIG_VIDEO_OV7640[0m
tristate "OmniVision OV7640 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7640 camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov7640.
config [31mCONFIG_VIDEO_OV7670[0m
tristate "OmniVision OV7670 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
config [31mCONFIG_VIDEO_OV7740[0m
tristate "OmniVision OV7740 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7740 VGA camera sensor.
config [31mCONFIG_VIDEO_OV8856[0m
tristate "OmniVision OV8856 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV8856 camera sensor.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ov8856.
config [31mCONFIG_VIDEO_OV9640[0m
tristate "OmniVision OV9640 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV9640 camera sensor.
config [31mCONFIG_VIDEO_OV9650[0m
tristate "OmniVision OV9650/OV9652 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_REGMAP_SCCB[0m
help
This is a V4L2 sensor driver for the Omnivision
OV9650 and OV9652 camera sensors.
config [31mCONFIG_VIDEO_OV13858[0m
tristate "OmniVision OV13858 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the OmniVision
OV13858 camera.
config [31mCONFIG_VIDEO_VS6624[0m
tristate "ST VS6624 sensor support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the ST VS6624
camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called vs6624.
config [31mCONFIG_VIDEO_MT9M001[0m
tristate "mt9m001 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This driver supports MT9M001 cameras from Micron, monochrome
and colour models.
config [31mCONFIG_VIDEO_MT9M032[0m
tristate "MT9M032 camera sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_VIDEO_APTINA_PLL[0m
help
This driver supports MT9M032 camera sensors from Aptina, monochrome
models only.
config [31mCONFIG_VIDEO_MT9M111[0m
tristate "mt9m111, mt9m112 and mt9m131 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This driver supports MT9M111, MT9M112 and MT9M131 cameras from
Micron/Aptina
config [31mCONFIG_VIDEO_MT9P031[0m
tristate "Aptina MT9P031 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_VIDEO_APTINA_PLL[0m
help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) mt9p031 5 Mpixel camera.
config [31mCONFIG_VIDEO_MT9T001[0m
tristate "Aptina MT9T001 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) mt0t001 3 Mpixel camera.
config [31mCONFIG_VIDEO_MT9T112[0m
tristate "Aptina MT9T111/MT9T112 support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) MT9T111 and MT9T112 3 Mpixel camera.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called mt9t112.
config [31mCONFIG_VIDEO_MT9V011[0m
tristate "Micron mt9v011 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the Micron
mt0v011 1.3 Mpixel camera. It currently only works with the
em28xx driver.
config [31mCONFIG_VIDEO_MT9V032[0m
tristate "Micron MT9V032 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_I2C[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a Video4Linux2 sensor driver for the Micron
MT9V032 752x480 CMOS sensor.
config [31mCONFIG_VIDEO_MT9V111[0m
tristate "Aptina MT9V111 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a Video4Linux2 sensor driver for the Aptina/Micron
MT9V111 sensor.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called mt9v111.
config [31mCONFIG_VIDEO_SR030PC30[0m
tristate "Siliconfile SR030PC30 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This driver supports SR030PC30 VGA camera from Siliconfile
config [31mCONFIG_VIDEO_NOON010PC30[0m
tristate "Siliconfile NOON010PC30 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This driver supports NOON010PC30 CIF camera from Siliconfile
source "drivers/media/i2c/m5mols/Kconfig"
config [31mCONFIG_VIDEO_RJ54N1[0m
tristate "Sharp RJ54N1CB0C sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a V4L2 sensor driver for Sharp RJ54N1CB0C CMOS image
sensor.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called rj54n1.
config [31mCONFIG_VIDEO_S5K6AA[0m
tristate "Samsung S5K6AAFX sensor support"
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
help
This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
config [31mCONFIG_VIDEO_S5K6A3[0m
tristate "Samsung S5K6A3 sensor support"
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
help
This is a V4L2 sensor driver for Samsung S5K6A3 raw
camera sensor.
config [31mCONFIG_VIDEO_S5K4ECGX[0m
tristate "Samsung S5K4ECGX sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_CRC32[0m
help
This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
camera sensor with an embedded SoC image signal processor.
config [31mCONFIG_VIDEO_S5K5BAF[0m
tristate "Samsung S5K5BAF sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a V4L2 sensor driver for Samsung S5K5BAF 2M
camera sensor with an embedded SoC image signal processor.
source "drivers/media/i2c/smiapp/Kconfig"
source "drivers/media/i2c/et8ek8/Kconfig"
config [31mCONFIG_VIDEO_S5C73M3[0m
tristate "Samsung S5C73M3 sensor support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_SPI[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
This is a V4L2 sensor driver for Samsung S5C73M3
8 Mpixel camera.
comment "Lens drivers"
config [31mCONFIG_VIDEO_AD5820[0m
tristate "AD5820 lens voice coil support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
help
This is a driver for the AD5820 camera lens voice coil.
It is used for example in Nokia N900 (RX-51).
config [31mCONFIG_VIDEO_AK7375[0m
tristate "AK7375 lens voice coil support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
help
This is a driver for the AK7375 camera lens voice coil.
AK7375 is a 12 bit DAC with 120mA output current sink
capability. This is designed for linear control of
voice coil motors, controlled via [31mCONFIG_I2C[0m serial interface.
config [31mCONFIG_VIDEO_DW9714[0m
tristate "DW9714 lens voice coil support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
help
This is a driver for the DW9714 camera lens voice coil.
DW9714 is a 10 bit DAC with 120mA output current sink
capability. This is designed for linear control of
voice coil motors, controlled via [31mCONFIG_I2C[0m serial interface.
config [31mCONFIG_VIDEO_DW9807_VCM[0m
tristate "DW9807 lens voice coil support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
help
This is a driver for the DW9807 camera lens voice coil.
DW9807 is a 10 bit DAC with 100mA output current sink
capability. This is designed for linear control of
voice coil motors, controlled via [31mCONFIG_I2C[0m serial interface.
comment "Flash devices"
config [31mCONFIG_VIDEO_ADP1653[0m
tristate "ADP1653 flash support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
help
This is a driver for the ADP1653 flash controller. It is used for
example in Nokia N900.
config [31mCONFIG_VIDEO_LM3560[0m
tristate "LM3560 dual flash driver support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_I2C[0m
help
This is a driver for the lm3560 dual flash controllers. It controls
flash, torch LEDs.
config [31mCONFIG_VIDEO_LM3646[0m
tristate "LM3646 dual flash driver support"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_CONTROLLER[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_REGMAP_I2C[0m
help
This is a driver for the lm3646 dual flash controllers. It controls
flash, torch LEDs.
comment "Video improvement chips"
config [31mCONFIG_VIDEO_UPD64031A[0m
tristate "NEC Electronics uPD64031A Ghost Reduction"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in [31mCONFIG_NTSC[0m TV cards made for
Japan and is used to reduce the 'ghosting' effect that can
be present in analog TV broadcasts.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called upd64031a.
config [31mCONFIG_VIDEO_UPD64083[0m
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the NEC Electronics uPD64083 3-Dimensional Y/[31mCONFIG_C[0m
separation video chip. It is used to improve the quality of
the colors of a composite signal.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called upd64083.
comment "Audio/Video compression chips"
config [31mCONFIG_VIDEO_SAA6752HS[0m
tristate "Philips SAA6752HS MPEG-2 Audio/Video Encoder"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_CRC32[0m
help
Support for the Philips SAA6752HS MPEG-2 video and MPEG-audio/AC-3
audio encoder with multiplexer.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called saa6752hs.
comment "SDR tuner chips"
config [31mCONFIG_SDR_MAX2175[0m
tristate "Maxim 2175 RF to Bits tuner"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_MEDIA_SDR_SUPPORT[0m && [31mCONFIG_I2C[0m
help
Support for Maxim 2175 tuner. It is an advanced analog/digital
radio receiver with RF-to-Bits front-end designed for SDR solutions.
To compile this driver as a module, choose [31mCONFIG_M[0m here; the
module will be called max2175.
comment "Miscellaneous helper chips"
config [31mCONFIG_VIDEO_THS7303[0m
tristate "THS7303/53 Video Amplifier"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for TI THS7303/53 video amplifier
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called ths7303.
config [31mCONFIG_VIDEO_M52790[0m
tristate "Mitsubishi M52790 A/V switch"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
help
Support for the Mitsubishi M52790 [31mCONFIG_A[0m/V switch.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called m52790.
config [31mCONFIG_VIDEO_I2C[0m
tristate "I2C transport video support"
depends on [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_VIDEOBUF2_VMALLOC[0m
imply [31mCONFIG_HWMON[0m
help
Enable the [31mCONFIG_I2C[0m transport video support which supports the
following:
* Panasonic AMG88xx Grid-Eye Sensors
* Melexis MLX90640 Thermal Cameras
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called video-i2c
config [31mCONFIG_VIDEO_ST_MIPID02[0m
tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_VIDEO_V4L2[0m && [31mCONFIG_VIDEO_V4L2_SUBDEV_API[0m
depends on [31mCONFIG_MEDIA_CAMERA_SUPPORT[0m
select [31mCONFIG_V4L2_FWNODE[0m
help
Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
It is used to allow usage of CSI-2 sensor with PARALLEL port
controller.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the
module will be called st-mipid02.
endmenu
endif