// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015, The Linux Foundation. All rights reserved. * Copyright (c) 2018, Linaro Limited */ #include <linux/bitops.h> #include <linux/regmap.h> #include "tsens.h" /* ----- SROT ------ */ #define SROT_HW_VER_OFF 0x0000 #define SROT_CTRL_OFF 0x0004 /* ----- TM ------ */ #define TM_INT_EN_OFF 0x0004 #define TM_UPPER_LOWER_INT_STATUS_OFF 0x0008 #define TM_UPPER_LOWER_INT_CLEAR_OFF 0x000c #define TM_UPPER_LOWER_INT_MASK_OFF 0x0010 #define TM_CRITICAL_INT_STATUS_OFF 0x0014 #define TM_CRITICAL_INT_CLEAR_OFF 0x0018 #define TM_CRITICAL_INT_MASK_OFF 0x001c #define TM_Sn_UPPER_LOWER_THRESHOLD_OFF 0x0020 #define TM_Sn_CRITICAL_THRESHOLD_OFF 0x0060 #define TM_Sn_STATUS_OFF 0x00a0 #define TM_TRDY_OFF 0x00e4 /* v2.x: 8996, 8998, sdm845 */ static const struct tsens_features tsens_v2_feat = { .ver_major = VER_2_X, .crit_int = 1, .adc = 0, .srot_split = 1, .max_sensors = 16, }; static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { /* ----- SROT ------ */ /* VERSION */ [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31), [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27), [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15), /* CTRL_OFF */ [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), /* ----- TM ------ */ /* INTERRUPT ENABLE */ /* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */ [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 2), /* Sn_STATUS */ REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11), REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21), REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS, TM_Sn_STATUS_OFF, 16, 16), REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 17, 17), REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 18, 18), REG_FIELD_FOR_EACH_SENSOR16(CRITICAL_STATUS, TM_Sn_STATUS_OFF, 19, 19), REG_FIELD_FOR_EACH_SENSOR16(MAX_STATUS, TM_Sn_STATUS_OFF, 20, 20), /* TRDY: 1=ready, 0=in progress */ [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), }; static const struct tsens_ops ops_generic_v2 = { .init = init_common, .get_temp = get_temp_tsens_valid, }; const struct tsens_plat_data data_tsens_v2 = { .ops = &ops_generic_v2, .feat = &tsens_v2_feat, .fields = tsens_v2_regfields, }; /* Kept around for backward compatibility with old msm8996.dtsi */ const struct tsens_plat_data data_8996 = { .num_sensors = 13, .ops = &ops_generic_v2, .feat = &tsens_v2_feat, .fields = tsens_v2_regfields, }; |