# SPDX-License-Identifier: GPL-2.0-only
if [31mCONFIG_ARCH_SA1100[0m
menu "SA11x0 Implementations"
config [31mCONFIG_SA1100_ASSABET[0m
bool "Assabet"
select [31mCONFIG_ARM_SA1110_CPUFREQ[0m
select [31mCONFIG_GPIO_REG[0m
select [31mCONFIG_LEDS_GPIO_REGISTER[0m
select [31mCONFIG_REGULATOR[0m
select [31mCONFIG_REGULATOR_FIXED_VOLTAGE[0m
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
config [31mCONFIG_ASSABET_NEPONSET[0m
bool "Include support for Neponset"
depends on [31mCONFIG_SA1100_ASSABET[0m
select [31mCONFIG_SA1111[0m
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (Assabet) with the SA-1111
Development Board (Nepon).
config [31mCONFIG_SA1100_CERF[0m
bool "CerfBoard"
select [31mCONFIG_ARM_SA1110_CPUFREQ[0m
select [31mCONFIG_LEDS_GPIO_REGISTER[0m
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
<http://www.intrinsyc.com/products/cerfboard/>.
Say Y if configuring for an Intrinsyc CerfBoard.
Say N otherwise.
choice
prompt "Cerf Flash available"
depends on [31mCONFIG_SA1100_CERF[0m
default [31mCONFIG_SA1100_CERF_FLASH_8MB[0m
config [31mCONFIG_SA1100_CERF_FLASH_8MB[0m
bool "8MB"
config [31mCONFIG_SA1100_CERF_FLASH_16MB[0m
bool "16MB"
config [31mCONFIG_SA1100_CERF_FLASH_32MB[0m
bool "32MB"
endchoice
config [31mCONFIG_SA1100_COLLIE[0m
bool "Sharp Zaurus SL5500"
# FIXME: select ARM_SA11x0_CPUFREQ
select [31mCONFIG_SHARP_LOCOMO[0m
select [31mCONFIG_SHARP_PARAM[0m
select [31mCONFIG_SHARP_SCOOP[0m
help
Say Y here to support the Sharp Zaurus SL5500 PDAs.
config [31mCONFIG_SA1100_H3100[0m
bool "Compaq iPAQ H3100"
select [31mCONFIG_ARM_SA1110_CPUFREQ[0m
select [31mCONFIG_HTC_EGPIO[0m
select [31mCONFIG_MFD_IPAQ_MICRO[0m
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer.
config [31mCONFIG_SA1100_H3600[0m
bool "Compaq iPAQ H3600/H3700"
select [31mCONFIG_ARM_SA1110_CPUFREQ[0m
select [31mCONFIG_HTC_EGPIO[0m
select [31mCONFIG_MFD_IPAQ_MICRO[0m
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 and H3700 handheld computers.
config [31mCONFIG_SA1100_BADGE4[0m
bool "HP Labs BadgePAD 4"
select [31mCONFIG_ARM_SA1100_CPUFREQ[0m
select [31mCONFIG_SA1111[0m
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
config [31mCONFIG_SA1100_JORNADA720[0m
bool "HP Jornada 720"
# FIXME: select ARM_SA11x0_CPUFREQ
select [31mCONFIG_SA1111[0m
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See
<http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#>
config [31mCONFIG_SA1100_JORNADA720_SSP[0m
bool "HP Jornada 720 Extended SSP driver"
depends on [31mCONFIG_SA1100_JORNADA720[0m
select [31mCONFIG_SA1100_SSP[0m
help
Say Y here if you have a HP Jornada 7xx handheld computer and you
want to access devices connected to the MCU. Those include the
keyboard, touchscreen, backlight and battery. This driver also activates
the generic SSP which it extends.
config [31mCONFIG_SA1100_HACKKIT[0m
bool "HackKit Core CPU Board"
select [31mCONFIG_ARM_SA1100_CPUFREQ[0m
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
config [31mCONFIG_SA1100_LART[0m
bool "LART"
select [31mCONFIG_ARM_SA1100_CPUFREQ[0m
help
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lartmaker.nl/> for
information on the LART.
config [31mCONFIG_SA1100_NANOENGINE[0m
bool "nanoEngine"
select [31mCONFIG_ARM_SA1110_CPUFREQ[0m
select [31mCONFIG_FORCE_PCI[0m
select [31mCONFIG_PCI_NANOENGINE[0m
help
Say Y here if you are using the Bright Star Engineering nanoEngine.
See <http://www.brightstareng.com/arm/nanoeng.htm> for information
on the BSE nanoEngine.
config [31mCONFIG_SA1100_PLEB[0m
bool "PLEB"
select [31mCONFIG_ARM_SA1100_CPUFREQ[0m
help
Say Y here if you are using version 1 of the Portable Linux
Embedded Board (also known as PLEB).
See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
for more information.
config [31mCONFIG_SA1100_SHANNON[0m
bool "Shannon"
select [31mCONFIG_ARM_SA1100_CPUFREQ[0m
select [31mCONFIG_REGULATOR[0m
select [31mCONFIG_REGULATOR_FIXED_VOLTAGE[0m
help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
platform with a 640x480 LCD, touchscreen, CIR keyboard, [31mCONFIG_PCMCIA[0m slots,
and a telco interface.
config [31mCONFIG_SA1100_SIMPAD[0m
bool "Simpad"
select [31mCONFIG_ARM_SA1110_CPUFREQ[0m
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
[31mCONFIG_PCMCIA[0m-Slot. The version for the Germany Telecom (DTAG) is the same
like CL4 in additional it has a [31mCONFIG_PCMCIA[0m-Slot. For more information
visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
config [31mCONFIG_SA1100_SSP[0m
tristate "Generic PIO SSP"
help
Say Y here to enable support for the generic PIO SSP driver.
This isn't for audio support, but for attached sensors and
other devices, eg for BadgePAD 4 sensor support.
endmenu
endif