/***********************license start***************
* Author: Cavium Networks
*
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
* Copyright (C) 2003-2018 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this file; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* or visit http://www.gnu.org/licenses/.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
***********************license end**************************************/
/*
* Functions for SPI initialization, configuration,
* and monitoring.
*/
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-config.h>
#include <asm/octeon/cvmx-spi.h>
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-pip-defs.h>
#include <asm/octeon/cvmx-pko-defs.h>
#include <asm/octeon/cvmx-spxx-defs.h>
#include <asm/octeon/cvmx-stxx-defs.h>
/*
* CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI
* initialization routines wait for SPI training. You can override the
* value using executive-config.h if necessary.
*/
#ifndef CVMX_HELPER_SPI_TIMEOUT
#define CVMX_HELPER_SPI_TIMEOUT 10
#endif
int __cvmx_helper_spi_enumerate(int interface)
{
if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
cvmx_spi4000_is_present(interface)) {
return 10;
} else {
return 16;
}
}
/**
* Probe a SPI interface and determine the number of ports
* connected to it. The SPI interface should still be down after
* this call.
*
* @interface: Interface to probe
*
* Returns Number of ports on the interface. Zero to disable.
*/
int __cvmx_helper_spi_probe(int interface)
{
int num_ports = 0;
if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) &&
cvmx_spi4000_is_present(interface)) {
num_ports = 10;
} else {
union cvmx_pko_reg_crc_enable enable;
num_ports = 16;
/*
* Unlike the SPI4000, most SPI devices don't
* automatically put on the L2 CRC. For everything
* except for the SPI4000 have PKO append the L2 CRC
* to the packet.
*/
enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE);
enable.s.enable |= 0xffff << (interface * 16);
cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64);
}
__cvmx_helper_setup_gmx(interface, num_ports);
return num_ports;
}
/**
* Bringup and enable a SPI interface. After this call packet I/O
* should be fully functional. This is called with IPD enabled but
* PKO disabled.
*
* @interface: Interface to bring up
*
* Returns Zero on success, negative on failure
*/
int __cvmx_helper_spi_enable(int interface)
{
/*
* Normally the ethernet L2 CRC is checked and stripped in the
* GMX block. When you are using SPI, this isn' the case and
* IPD needs to check the L2 CRC.
*/
int num_ports = cvmx_helper_ports_on_interface(interface);
int ipd_port;
for (ipd_port = interface * 16; ipd_port < interface * 16 + num_ports;
ipd_port++) {
union cvmx_pip_prt_cfgx port_config;
port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
port_config.s.crc_en = 1;
cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64);
}
if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) {
cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX,
CVMX_HELPER_SPI_TIMEOUT, num_ports);
if (cvmx_spi4000_is_present(interface))
cvmx_spi4000_initialize(interface);
}
__cvmx_interrupt_spxx_int_msk_enable(interface);
__cvmx_interrupt_stxx_int_msk_enable(interface);
__cvmx_interrupt_gmxx_enable(interface);
return 0;
}
/**
* Return the link state of an IPD/PKO port as returned by
* auto negotiation. The result of this function may not match
* Octeon's link config if auto negotiation has changed since
* the last call to cvmx_helper_link_set().
*
* @ipd_port: IPD/PKO port to query
*
* Returns Link state
*/
cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port)
{
cvmx_helper_link_info_t result;
int interface = cvmx_helper_get_interface_num(ipd_port);
int index = cvmx_helper_get_interface_index_num(ipd_port);
result.u64 = 0;
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) {
/* The simulator gives you a simulated full duplex link */
result.s.link_up = 1;
result.s.full_duplex = 1;
result.s.speed = 10000;
} else if (cvmx_spi4000_is_present(interface)) {
union cvmx_gmxx_rxx_rx_inbnd inband =
cvmx_spi4000_check_speed(interface, index);
result.s.link_up = inband.s.status;
result.s.full_duplex = inband.s.duplex;
switch (inband.s.speed) {
case 0: /* 10 Mbps */
result.s.speed = 10;
break;
case 1: /* 100 Mbps */
result.s.speed = 100;
break;
case 2: /* 1 Gbps */
result.s.speed = 1000;
break;
case 3: /* Illegal */
result.s.speed = 0;
result.s.link_up = 0;
break;
}
} else {
/* For generic SPI we can't determine the link, just return some
sane results */
result.s.link_up = 1;
result.s.full_duplex = 1;
result.s.speed = 10000;
}
return result;
}
/**
* Configure an IPD/PKO port for the specified link state. This
* function does not influence auto negotiation at the PHY level.
* The passed link state must always match the link state returned
* by cvmx_helper_link_get().
*
* @ipd_port: IPD/PKO port to configure
* @link_info: The new link state
*
* Returns Zero on success, negative on failure
*/
int __cvmx_helper_spi_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
{
/* Nothing to do. If we have a SPI4000 then the setup was already performed
by cvmx_spi4000_check_speed(). If not then there isn't any link
info */
return 0;
}