/*
* T104xQDS Device Tree Source
*
* Copyright 2013 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/ {
model = "fsl,T1040QDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
emi1_rgmii0 = &t1040mdio0;
emi1_rgmii1 = &t1040mdio1;
emi1_slot3 = &t1040mdio3;
emi1_slot5 = &t1040mdio5;
emi1_slot6 = &t1040mdio6;
emi1_slot7 = &t1040mdio7;
rgmii_phy1 = &rgmii_phy1;
rgmii_phy2 = &rgmii_phy2;
phy_s3_01 = &phy_s3_01;
phy_s3_02 = &phy_s3_02;
phy_s3_03 = &phy_s3_03;
phy_s3_04 = &phy_s3_04;
phy_s5_01 = &phy_s5_01;
phy_s5_02 = &phy_s5_02;
phy_s5_03 = &phy_s5_03;
phy_s5_04 = &phy_s5_04;
phy_s6_01 = &phy_s6_01;
phy_s6_02 = &phy_s6_02;
phy_s6_03 = &phy_s6_03;
phy_s6_04 = &phy_s6_04;
phy_s7_01 = &phy_s7_01;
phy_s7_02 = &phy_s7_02;
phy_s7_03 = &phy_s7_03;
phy_s7_04 = &phy_s7_04;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bman_fbpr: bman-fbpr {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,fpga-qixis";
reg = <3 0 0x300>;
ranges = <0 3 0 0x300>;
mdio-mux-emi1 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&mdio0>;
reg = <0x54 1>;
mux-mask = <0xe0>;
t1040mdio0: mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00>;
status = "disabled";
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
};
t1040mdio1: mdio@20 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x20>;
status = "disabled";
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
};
t1040mdio3: mdio@60 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x60>;
status = "disabled";
phy_s3_01: ethernet-phy@1c {
reg = <0x1c>;
};
phy_s3_02: ethernet-phy@1d {
reg = <0x1d>;
};
phy_s3_03: ethernet-phy@1e {
reg = <0x1e>;
};
phy_s3_04: ethernet-phy@1f {
reg = <0x1f>;
};
};
t1040mdio5: mdio@a0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xa0>;
phy_s5_01: ethernet-phy@1c {
reg = <0x14>;
};
phy_s5_02: ethernet-phy@1d {
reg = <0x15>;
};
phy_s5_03: ethernet-phy@1e {
reg = <0x16>;
};
phy_s5_04: ethernet-phy@1f {
reg = <0x17>;
};
};
t1040mdio6: mdio@c0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xc0>;
phy_s6_01: ethernet-phy@1c {
reg = <0x18>;
};
phy_s6_02: ethernet-phy@1d {
reg = <0x19>;
};
phy_s6_03: ethernet-phy@1e {
reg = <0x1a>;
};
phy_s6_04: ethernet-phy@1f {
reg = <0x1b>;
};
};
t1040mdio7: mdio@e0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xe0>;
status = "disabled";
phy_s7_01: ethernet-phy@1c {
reg = <0x1c>;
};
phy_s7_02: ethernet-phy@1d {
reg = <0x1d>;
};
phy_s7_03: ethernet-phy@1e {
reg = <0x1e>;
};
phy_s7_04: ethernet-phy@1f {
reg = <0x1f>;
};
};
};
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>; /* input clock */
};
};
i2c@118000 {
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
};
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
};
fman@400000 {
ethernet@e0000 {
fixed-link = <0 1 1000 0 0>;
phy-connection-type = "sgmii";
};
ethernet@e2000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "sgmii";
};
ethernet@e4000 {
phy-handle = <&phy_s7_03>;
phy-connection-type = "sgmii";
};
ethernet@e6000 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii";
};
ethernet@e8000 {
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii";
};
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk8";
tx-clock-name = "clk9";
fsl,rx-sync-clock = "rsync_pin";
fsl,tx-sync-clock = "tsync_pin";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,tdm-framer-type = "e1";
fsl,tdm-id = <0>;
fsl,siram-entry-id = <0>;
fsl,tdm-interface;
};
ucc_serial: ucc@2200 {
compatible = "fsl,t1040-ucc-uart";
port-number = <0>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
};
};
};