/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright(c) 2013 - 2018 Intel Corporation. */
#ifndef _FM10K_MBX_H_
#define _FM10K_MBX_H_
/* forward declaration */
struct fm10k_mbx_info;
#include "fm10k_type.h"
#include "fm10k_tlv.h"
/* PF Mailbox Registers */
#define FM10K_MBMEM(_n) ((_n) + 0x18000)
#define FM10K_MBMEM_VF(_n, _m) (((_n) * 0x10) + (_m) + 0x18000)
#define FM10K_MBMEM_SM(_n) ((_n) + 0x18400)
#define FM10K_MBMEM_PF(_n) ((_n) + 0x18600)
/* XOR provides means of switching from Tx to Rx FIFO */
#define FM10K_MBMEM_PF_XOR (FM10K_MBMEM_SM(0) ^ FM10K_MBMEM_PF(0))
#define FM10K_MBX(_n) ((_n) + 0x18800)
#define FM10K_MBX_REQ 0x00000002
#define FM10K_MBX_ACK 0x00000004
#define FM10K_MBX_REQ_INTERRUPT 0x00000008
#define FM10K_MBX_ACK_INTERRUPT 0x00000010
#define FM10K_MBX_INTERRUPT_ENABLE 0x00000020
#define FM10K_MBX_INTERRUPT_DISABLE 0x00000040
#define FM10K_MBX_GLOBAL_REQ_INTERRUPT 0x00000200
#define FM10K_MBX_GLOBAL_ACK_INTERRUPT 0x00000400
#define FM10K_MBICR(_n) ((_n) + 0x18840)
#define FM10K_GMBX 0x18842
/* VF Mailbox Registers */
#define FM10K_VFMBX 0x00010
#define FM10K_VFMBMEM(_n) ((_n) + 0x00020)
#define FM10K_VFMBMEM_LEN 16
#define FM10K_VFMBMEM_VF_XOR (FM10K_VFMBMEM_LEN / 2)
/* Delays/timeouts */
#define FM10K_MBX_DISCONNECT_TIMEOUT 500
#define FM10K_MBX_POLL_DELAY 19
#define FM10K_MBX_INT_DELAY 20
/* PF/VF Mailbox state machine
*
* +----------+ connect() +----------+
* | CLOSED | --------------> | CONNECT |
* +----------+ +----------+
* ^ ^ |
* | rcv: rcv: | | rcv:
* | Connect Disconnect | | Connect
* | Disconnect Error | | Data
* | | |
* | | V
* +----------+ disconnect() +----------+
* |DISCONNECT| <-------------- | OPEN |
* +----------+ +----------+
*
* The diagram above describes the PF/VF mailbox state machine. There
* are four main states to this machine.
* Closed: This state represents a mailbox that is in a standby state
* with interrupts disabled. In this state the mailbox should not
* read the mailbox or write any data. The only means of exiting
* this state is for the system to make the connect() call for the
* mailbox, it will then transition to the connect state.
* Connect: In this state the mailbox is seeking a connection. It will
* post a connect message with no specified destination and will
* wait for a reply from the other side of the mailbox. This state
* is exited when either a connect with the local mailbox as the
* destination is received or when a data message is received with
* a valid sequence number.
* Open: In this state the mailbox is able to transfer data between the local
* entity and the remote. It will fall back to connect in the event of
* receiving either an error message, or a disconnect message. It will
* transition to disconnect on a call to disconnect();
* Disconnect: In this state the mailbox is attempting to gracefully terminate
* the connection. It will do so at the first point where it knows
* that the remote endpoint is either done sending, or when the
* remote endpoint has fallen back into connect.
*/
enum fm10k_mbx_state {
FM10K_STATE_CLOSED,
FM10K_STATE_CONNECT,
FM10K_STATE_OPEN,
FM10K_STATE_DISCONNECT,
};
/* PF/VF Mailbox header format
* 3 2 1 0
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | Size/Err_no/CRC | Rsvd0 | Head | Tail | Type |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* The layout above describes the format for the header used in the PF/VF
* mailbox. The header is broken out into the following fields:
* Type: There are 4 supported message types
* 0x8: Data header - used to transport message data
* 0xC: Connect header - used to establish connection
* 0xD: Disconnect header - used to tear down a connection
* 0xE: Error header - used to address message exceptions
* Tail: Tail index for local FIFO
* Tail index actually consists of two parts. The MSB of
* the head is a loop tracker, it is 0 on an even numbered
* loop through the FIFO, and 1 on the odd numbered loops.
* To get the actual mailbox offset based on the tail it
* is necessary to add bit 3 to bit 0 and clear bit 3. This
* gives us a valid range of 0x1 - 0xE.
* Head: Head index for remote FIFO
* Head index follows the same format as the tail index.
* Rsvd0: Reserved 0 portion of the mailbox header
* CRC: Running CRC for all data since connect plus current message header
* Size: Maximum message size - Applies only to connect headers
* The maximum message size is provided during connect to avoid
* jamming the mailbox with messages that do not fit.
* Err_no: Error number - Applies only to error headers
* The error number provides an indication of the type of error
* experienced.
*/
/* macros for retrieving and setting header values */
#define FM10K_MSG_HDR_MASK(name) \
((0x1u << FM10K_MSG_##name##_SIZE) - 1)
#define FM10K_MSG_HDR_FIELD_SET(value, name) \
(((u32)(value) & FM10K_MSG_HDR_MASK(name)) << FM10K_MSG_##name##_SHIFT)
#define FM10K_MSG_HDR_FIELD_GET(value, name) \
((u16)((value) >> FM10K_MSG_##name##_SHIFT) & FM10K_MSG_HDR_MASK(name))
/* offsets shared between all headers */
#define FM10K_MSG_TYPE_SHIFT 0
#define FM10K_MSG_TYPE_SIZE 4
#define FM10K_MSG_TAIL_SHIFT 4
#define FM10K_MSG_TAIL_SIZE 4
#define FM10K_MSG_HEAD_SHIFT 8
#define FM10K_MSG_HEAD_SIZE 4
#define FM10K_MSG_RSVD0_SHIFT 12
#define FM10K_MSG_RSVD0_SIZE 4
/* offsets for data/disconnect headers */
#define FM10K_MSG_CRC_SHIFT 16
#define FM10K_MSG_CRC_SIZE 16
/* offsets for connect headers */
#define FM10K_MSG_CONNECT_SIZE_SHIFT 16
#define FM10K_MSG_CONNECT_SIZE_SIZE 16
/* offsets for error headers */
#define FM10K_MSG_ERR_NO_SHIFT 16
#define FM10K_MSG_ERR_NO_SIZE 16
enum fm10k_msg_type {
FM10K_MSG_DATA = 0x8,
FM10K_MSG_CONNECT = 0xC,
FM10K_MSG_DISCONNECT = 0xD,
FM10K_MSG_ERROR = 0xE,
};
/* HNI/SM Mailbox FIFO format
* 3 2 1 0
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-------+-----------------------+-------+-----------------------+
* | Error | Remote Head |Version| Local Tail |
* +-------+-----------------------+-------+-----------------------+
* | |
* . Local FIFO Data .
* . .
* +-------+-----------------------+-------+-----------------------+
*
* The layout above describes the format for the FIFOs used by the host
* network interface and the switch manager to communicate messages back
* and forth. Both the HNI and the switch maintain one such FIFO. The
* layout in memory has the switch manager FIFO followed immediately by
* the HNI FIFO. For this reason I am using just the pointer to the
* HNI FIFO in the mailbox ops as the offset between the two is fixed.
*
* The header for the FIFO is broken out into the following fields:
* Local Tail: Offset into FIFO region for next DWORD to write.
* Version: Version info for mailbox, only values of 0/1 are supported.
* Remote Head: Offset into remote FIFO to indicate how much we have read.
* Error: Error indication, values TBD.
*/
/* version number for switch manager mailboxes */
#define FM10K_SM_MBX_VERSION 1
#define FM10K_SM_MBX_FIFO_LEN (FM10K_MBMEM_PF_XOR - 1)
/* offsets shared between all SM FIFO headers */
#define FM10K_MSG_SM_TAIL_SHIFT 0
#define FM10K_MSG_SM_TAIL_SIZE 12
#define FM10K_MSG_SM_VER_SHIFT 12
#define FM10K_MSG_SM_VER_SIZE 4
#define FM10K_MSG_SM_HEAD_SHIFT 16
#define FM10K_MSG_SM_HEAD_SIZE 12
#define FM10K_MSG_SM_ERR_SHIFT 28
#define FM10K_MSG_SM_ERR_SIZE 4
/* All error messages returned by mailbox functions
* The value -511 is 0xFE01 in hex. The idea is to order the errors
* from 0xFE01 - 0xFEFF so error codes are easily visible in the mailbox
* messages. This also helps to avoid error number collisions as Linux
* doesn't appear to use error numbers 256 - 511.
*/
#define FM10K_MBX_ERR(_n) ((_n) - 512)
#define FM10K_MBX_ERR_NO_MBX FM10K_MBX_ERR(0x01)
#define FM10K_MBX_ERR_NO_SPACE FM10K_MBX_ERR(0x03)
#define FM10K_MBX_ERR_TAIL FM10K_MBX_ERR(0x05)
#define FM10K_MBX_ERR_HEAD FM10K_MBX_ERR(0x06)
#define FM10K_MBX_ERR_SRC FM10K_MBX_ERR(0x08)
#define FM10K_MBX_ERR_TYPE FM10K_MBX_ERR(0x09)
#define FM10K_MBX_ERR_SIZE FM10K_MBX_ERR(0x0B)
#define FM10K_MBX_ERR_BUSY FM10K_MBX_ERR(0x0C)
#define FM10K_MBX_ERR_RSVD0 FM10K_MBX_ERR(0x0E)
#define FM10K_MBX_ERR_CRC FM10K_MBX_ERR(0x0F)
#define FM10K_MBX_CRC_SEED 0xFFFF
struct fm10k_mbx_ops {
s32 (*connect)(struct fm10k_hw *, struct fm10k_mbx_info *);
void (*disconnect)(struct fm10k_hw *, struct fm10k_mbx_info *);
bool (*rx_ready)(struct fm10k_mbx_info *);
bool (*tx_ready)(struct fm10k_mbx_info *, u16);
bool (*tx_complete)(struct fm10k_mbx_info *);
s32 (*enqueue_tx)(struct fm10k_hw *, struct fm10k_mbx_info *,
const u32 *);
s32 (*process)(struct fm10k_hw *, struct fm10k_mbx_info *);
s32 (*register_handlers)(struct fm10k_mbx_info *,
const struct fm10k_msg_data *);
};
struct fm10k_mbx_fifo {
u32 *buffer;
u16 head;
u16 tail;
u16 size;
};
/* size of buffer to be stored in mailbox for FIFOs */
#define FM10K_MBX_TX_BUFFER_SIZE 512
#define FM10K_MBX_RX_BUFFER_SIZE 128
#define FM10K_MBX_BUFFER_SIZE \
(FM10K_MBX_TX_BUFFER_SIZE + FM10K_MBX_RX_BUFFER_SIZE)
/* minimum and maximum message size in dwords */
#define FM10K_MBX_MSG_MAX_SIZE \
((FM10K_MBX_TX_BUFFER_SIZE - 1) & (FM10K_MBX_RX_BUFFER_SIZE - 1))
#define FM10K_VFMBX_MSG_MTU ((FM10K_VFMBMEM_LEN / 2) - 1)
#define FM10K_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
#define FM10K_MBX_INIT_DELAY 500 /* microseconds between retries */
struct fm10k_mbx_info {
/* function pointers for mailbox operations */
struct fm10k_mbx_ops ops;
const struct fm10k_msg_data *msg_data;
/* message FIFOs */
struct fm10k_mbx_fifo rx;
struct fm10k_mbx_fifo tx;
/* delay for handling timeouts */
u32 timeout;
u32 udelay;
/* mailbox state info */
u32 mbx_reg, mbmem_reg, mbx_lock, mbx_hdr;
u16 max_size, mbmem_len;
u16 tail, tail_len, pulled;
u16 head, head_len, pushed;
u16 local, remote;
enum fm10k_mbx_state state;
/* result of last mailbox test */
s32 test_result;
/* statistics */
u64 tx_busy;
u64 tx_dropped;
u64 tx_messages;
u64 tx_dwords;
u64 tx_mbmem_pulled;
u64 rx_messages;
u64 rx_dwords;
u64 rx_mbmem_pushed;
u64 rx_parse_err;
/* Buffer to store messages */
u32 buffer[FM10K_MBX_BUFFER_SIZE];
};
s32 fm10k_pfvf_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *,
const struct fm10k_msg_data *, u8);
s32 fm10k_sm_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *,
const struct fm10k_msg_data *);
#endif /* _FM10K_MBX_H_ */