* Clock bindings for Freescale i.MX31
Required properties:
- compatible: Should be "fsl,imx31-ccm"
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX31
clocks and IDs.
Clock ID
-----------------------
dummy 0
ckih 1
ckil 2
mpll 3
spll 4
upll 5
mcu_main 6
hsp 7
ahb 8
nfc 9
ipg 10
per_div 11
per 12
csi_sel 13
fir_sel 14
csi_div 15
usb_div_pre 16
usb_div_post 17
fir_div_pre 18
fir_div_post 19
sdhc1_gate 20
sdhc2_gate 21
gpt_gate 22
epit1_gate 23
epit2_gate 24
iim_gate 25
ata_gate 26
sdma_gate 27
cspi3_gate 28
rng_gate 29
uart1_gate 30
uart2_gate 31
ssi1_gate 32
i2c1_gate 33
i2c2_gate 34
i2c3_gate 35
hantro_gate 36
mstick1_gate 37
mstick2_gate 38
csi_gate 39
rtc_gate 40
wdog_gate 41
pwm_gate 42
sim_gate 43
ect_gate 44
usb_gate 45
kpp_gate 46
ipu_gate 47
uart3_gate 48
uart4_gate 49
uart5_gate 50
owire_gate 51
ssi2_gate 52
cspi1_gate 53
cspi2_gate 54
gacc_gate 55
emi_gate 56
rtic_gate 57
firi_gate 58
Examples:
clks: ccm@53f80000{
compatible = "fsl,imx31-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <31>, <53>;
#clock-cells = <1>;
};
uart1: serial@43f90000 {
compatible = "fsl,imx31-uart", "fsl,imx21-uart";
reg = <0x43f90000 0x4000>;
interrupts = <45>;
clocks = <&clks 10>, <&clks 30>;
clock-names = "ipg", "per";
};