# SPDX-License-Identifier: GPL-2.0-only
#
# Hardware monitoring chip drivers configuration
#
menuconfig [31mCONFIG_HWMON[0m
tristate "Hardware Monitoring support"
depends on [31mCONFIG_HAS_IOMEM[0m
default y
help
Hardware monitoring devices let you monitor the hardware health
of a system. Most modern motherboards include such a device. It
can include temperature sensors, voltage sensors, fan speed
sensors and various additional features such as the ability to
control the speed of the fans. If you want this support you
should say Y here and also to the specific driver(s) for your
sensors chip(s) below.
To find out which specific driver(s) you need, use the
sensors-detect script from the lm_sensors package. Read
<file:Documentation/hwmon/userspace-tools.rst> for details.
This support can also be built as a module. If so, the module
will be called hwmon.
if [31mCONFIG_HWMON[0m
config [31mCONFIG_HWMON_VID[0m
tristate
config [31mCONFIG_HWMON_DEBUG_CHIP[0m
bool "Hardware Monitoring Chip debugging messages"
help
Say Y here if you want the [31mCONFIG_I2C[0m chip drivers to produce a bunch of
debug messages to the system log. Select this if you are having
a problem with [31mCONFIG_I2C[0m support and want to see more of what is going
on.
comment "Native drivers"
config [31mCONFIG_SENSORS_AB8500[0m
tristate "AB8500 thermal monitoring"
depends on [31mCONFIG_AB8500_GPADC[0m && [31mCONFIG_AB8500_BM[0m
help
If you say yes here you get support for the thermal sensor part
of the AB8500 chip. The driver includes thermal management for
AB8500 die and two GPADC channels. The GPADC channel are preferably
used to access sensors outside the AB8500 chip.
This driver can also be built as a module. If so, the module
will be called abx500-temp.
config [31mCONFIG_SENSORS_ABITUGURU[0m
tristate "Abit uGuru (rev 1 & 2)"
depends on [31mCONFIG_X86[0m && [31mCONFIG_DMI[0m
help
If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
control parts of the Abit uGuru are not supported. The Abit uGuru
chip can be found on Abit uGuru featuring motherboards (most modern
Abit motherboards from before end 2005). For more info and a list
of which motherboards have which revision see
Documentation/hwmon/abituguru.rst
This driver can also be built as a module. If so, the module
will be called abituguru.
config [31mCONFIG_SENSORS_ABITUGURU3[0m
tristate "Abit uGuru (rev 3)"
depends on [31mCONFIG_X86[0m && [31mCONFIG_DMI[0m
help
If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
and their settings is supported. The third revision of the Abit
uGuru chip can be found on recent Abit motherboards (since end
2005). For more info and a list of which motherboards have which
revision see Documentation/hwmon/abituguru3.rst
This driver can also be built as a module. If so, the module
will be called abituguru3.
config [31mCONFIG_SENSORS_AD7314[0m
tristate "Analog Devices AD7314 and compatibles"
depends on [31mCONFIG_SPI[0m
help
If you say yes here you get support for the Analog Devices
AD7314, ADT7301 and ADT7302 temperature sensors.
This driver can also be built as a module. If so, the module
will be called ad7314.
config [31mCONFIG_SENSORS_AD7414[0m
tristate "Analog Devices AD7414"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Analog Devices
AD7414 temperature monitoring chip.
This driver can also be built as a module. If so, the module
will be called ad7414.
config [31mCONFIG_SENSORS_AD7418[0m
tristate "Analog Devices AD7416, AD7417 and AD7418"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Analog Devices
AD7416, AD7417 and AD7418 temperature monitoring chips.
This driver can also be built as a module. If so, the module
will be called ad7418.
config [31mCONFIG_SENSORS_ADM1021[0m
tristate "Analog Devices ADM1021 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Analog Devices ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
This driver can also be built as a module. If so, the module
will be called adm1021.
config [31mCONFIG_SENSORS_ADM1025[0m
tristate "Analog Devices ADM1025 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for Analog Devices ADM1025
and Philips NE1619 sensor chips.
This driver can also be built as a module. If so, the module
will be called adm1025.
config [31mCONFIG_SENSORS_ADM1026[0m
tristate "Analog Devices ADM1026 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for Analog Devices ADM1026
sensor chip.
This driver can also be built as a module. If so, the module
will be called adm1026.
config [31mCONFIG_SENSORS_ADM1029[0m
tristate "Analog Devices ADM1029"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Analog Devices ADM1029
sensor chip.
Very rare chip, please let us know you use it.
This driver can also be built as a module. If so, the module
will be called adm1029.
config [31mCONFIG_SENSORS_ADM1031[0m
tristate "Analog Devices ADM1031 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
This driver can also be built as a module. If so, the module
will be called adm1031.
config [31mCONFIG_SENSORS_ADM9240[0m
tristate "Analog Devices ADM9240 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for Analog Devices ADM9240,
Dallas DS1780, National Semiconductor LM81 sensor chips.
This driver can also be built as a module. If so, the module
will be called adm9240.
config [31mCONFIG_SENSORS_ADT7X10[0m
tristate
help
This module contains common code shared by the ADT7310/ADT7320 and
ADT7410/ADT7420 temperature monitoring chip drivers.
If built as a module, the module will be called adt7x10.
config [31mCONFIG_SENSORS_ADT7310[0m
tristate "Analog Devices ADT7310/ADT7320"
depends on [31mCONFIG_SPI_MASTER[0m
select [31mCONFIG_SENSORS_ADT7X10[0m
help
If you say yes here you get support for the Analog Devices
ADT7310 and ADT7320 temperature monitoring chips.
This driver can also be built as a module. If so, the module
will be called adt7310.
config [31mCONFIG_SENSORS_ADT7410[0m
tristate "Analog Devices ADT7410/ADT7420"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_SENSORS_ADT7X10[0m
help
If you say yes here you get support for the Analog Devices
ADT7410 and ADT7420 temperature monitoring chips.
This driver can also be built as a module. If so, the module
will be called adt7410.
config [31mCONFIG_SENSORS_ADT7411[0m
tristate "Analog Devices ADT7411"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Analog Devices
ADT7411 voltage and temperature monitoring chip.
This driver can also be built as a module. If so, the module
will be called adt7411.
config [31mCONFIG_SENSORS_ADT7462[0m
tristate "Analog Devices ADT7462"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Analog Devices
ADT7462 temperature monitoring chips.
This driver can also be built as a module. If so, the module
will be called adt7462.
config [31mCONFIG_SENSORS_ADT7470[0m
tristate "Analog Devices ADT7470"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Analog Devices
ADT7470 temperature monitoring chips.
This driver can also be built as a module. If so, the module
will be called adt7470.
config [31mCONFIG_SENSORS_ADT7475[0m
tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the Analog Devices
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
chips.
This driver can also be built as a module. If so, the module
will be called adt7475.
config [31mCONFIG_SENSORS_AS370[0m
tristate "Synaptics AS370 SoC hardware monitoring driver"
help
If you say yes here you get support for the PVT sensors of
the Synaptics AS370 SoC
This driver can also be built as a module. If so, the module
will be called as370-hwmon.
config [31mCONFIG_SENSORS_ASC7621[0m
tristate "Andigilog aSC7621"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the aSC7621
family of SMBus sensors chip found on most Intel X38, X48, X58,
945, 965 and 975 desktop boards. Currently supported chips:
aSC7621
aSC7621a
This driver can also be built as a module. If so, the module
will be called asc7621.
config [31mCONFIG_SENSORS_K8TEMP[0m
tristate "AMD Athlon64/FX or Opteron temperature sensor"
depends on [31mCONFIG_X86[0m && [31mCONFIG_PCI[0m
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported is whole AMD K8
microarchitecture. Please note that you will need at least
lm-sensors 2.10.1 for proper userspace support.
This driver can also be built as a module. If so, the module
will be called k8temp.
config [31mCONFIG_SENSORS_K10TEMP[0m
tristate "AMD Family 10h+ temperature sensor"
depends on [31mCONFIG_X86[0m && [31mCONFIG_PCI[0m && [31mCONFIG_AMD_NB[0m
help
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
the AMD Family 10h and all revisions of the AMD Family 11h,
12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
and 16h (Kabini/Mullins) microarchitectures.
This driver can also be built as a module. If so, the module
will be called k10temp.
config [31mCONFIG_SENSORS_FAM15H_POWER[0m
tristate "AMD Family 15h processor power"
depends on [31mCONFIG_X86[0m && [31mCONFIG_PCI[0m && [31mCONFIG_CPU_SUP_AMD[0m
help
If you say yes here you get support for processor power
information of your AMD family 15h CPU.
This driver can also be built as a module. If so, the module
will be called fam15h_power.
config [31mCONFIG_SENSORS_APPLESMC[0m
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on [31mCONFIG_INPUT[0m && [31mCONFIG_X86[0m
select [31mCONFIG_NEW_LEDS[0m
select [31mCONFIG_LEDS_CLASS[0m
select [31mCONFIG_INPUT_POLLDEV[0m
help
This driver provides support for the Apple System Management
Controller, which provides an accelerometer (Apple Sudden Motion
Sensor), light sensors, temperature sensors, keyboard backlight
control and fan control.
Only Intel-based Apple's computers are supported (MacBook Pro,
MacBook, MacMini).
Data from the different sensors, keyboard backlight control and fan
control are accessible via sysfs.
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
config [31mCONFIG_SENSORS_ARM_SCMI[0m
tristate "ARM SCMI Sensors"
depends on [31mCONFIG_ARM_SCMI_PROTOCOL[0m
depends on [31mCONFIG_THERMAL[0m || ![31mCONFIG_THERMAL_OF[0m
help
This driver provides support for temperature, voltage, current
and power sensors available on SCMI based platforms. The actual
number and type of sensors exported depend on the platform.
This driver can also be built as a module. If so, the module
will be called scmi-hwmon.
config [31mCONFIG_SENSORS_ARM_SCPI[0m
tristate "ARM SCPI Sensors"
depends on [31mCONFIG_ARM_SCPI_PROTOCOL[0m
depends on [31mCONFIG_THERMAL[0m || ![31mCONFIG_THERMAL_OF[0m
help
This driver provides support for temperature, voltage, current
and power sensors available on [31mCONFIG_ARM[0m Ltd's SCP based platforms. The
actual number and type of sensors exported depend on the platform.
config [31mCONFIG_SENSORS_ASB100[0m
tristate "Asus ASB100 Bach"
depends on [31mCONFIG_X86[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the ASB100 Bach sensor
chip found on some Asus mainboards.
This driver can also be built as a module. If so, the module
will be called asb100.
config [31mCONFIG_SENSORS_ASPEED[0m
tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
depends on [31mCONFIG_THERMAL[0m || [31mCONFIG_THERMAL[0m=n
select [31mCONFIG_REGMAP[0m
help
This driver provides support for ASPEED AST2400/AST2500 [31mCONFIG_PWM[0m
and Fan Tacho controllers.
This driver can also be built as a module. If so, the module
will be called aspeed_pwm_tacho.
config [31mCONFIG_SENSORS_ATXP1[0m
tristate "Attansic ATXP1 VID controller"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the Attansic ATXP1 VID
controller.
If your board have such a chip, you are able to control your CPU
core and other voltages.
This driver can also be built as a module. If so, the module
will be called atxp1.
config [31mCONFIG_SENSORS_DS620[0m
tristate "Dallas Semiconductor DS620"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Dallas Semiconductor
DS620 sensor chip.
This driver can also be built as a module. If so, the module
will be called ds620.
config [31mCONFIG_SENSORS_DS1621[0m
tristate "Dallas Semiconductor DS1621 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Dallas Semiconductor/Maxim
Integrated DS1621 sensor chips and compatible models including:
- Dallas Semiconductor DS1625
- Maxim Integrated DS1631
- Maxim Integrated DS1721
- Maxim Integrated DS1731
This driver can also be built as a module. If so, the module
will be called ds1621.
config [31mCONFIG_SENSORS_DELL_SMM[0m
tristate "Dell laptop SMM BIOS hwmon driver"
depends on [31mCONFIG_X86[0m
help
This hwmon driver adds support for reporting temperature of different
sensors and controls the fans on Dell laptops via System Management
Mode provided by Dell BIOS.
When option [31mCONFIG_I8K[0m is also enabled this driver provides legacy /proc/i8k
userspace interface for i8kutils package.
config [31mCONFIG_SENSORS_DA9052_ADC[0m
tristate "Dialog DA9052/DA9053 ADC"
depends on [31mCONFIG_PMIC_DA9052[0m
help
Say y here to support the ADC found on Dialog Semiconductor
DA9052-BC and DA9053-AA/Bx PMICs.
This driver can also be built as module. If so, the module
will be called da9052-hwmon.
config [31mCONFIG_SENSORS_DA9055[0m
tristate "Dialog Semiconductor DA9055 ADC"
depends on [31mCONFIG_MFD_DA9055[0m
help
If you say yes here you get support for ADC on the Dialog
Semiconductor DA9055 PMIC.
This driver can also be built as a module. If so, the module
will be called da9055-hwmon.
config [31mCONFIG_SENSORS_I5K_AMB[0m
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on [31mCONFIG_PCI[0m
help
If you say yes here you get support for [31mCONFIG_FB[0m-DIMM AMB temperature
monitoring chips on systems with the Intel 5000 series chipset.
This driver can also be built as a module. If so, the module
will be called i5k_amb.
config [31mCONFIG_SENSORS_F71805F[0m
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
depends on ![31mCONFIG_PPC[0m
help
If you say yes here you get support for hardware monitoring
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71805f.
config [31mCONFIG_SENSORS_F71882FG[0m
tristate "Fintek F71882FG and compatibles"
depends on ![31mCONFIG_PPC[0m
help
If you say yes here you get support for hardware monitoring
features of many Fintek Super-I/O (LPC) chips. The currently
supported chips are:
F71808E/[31mCONFIG_A[0m
F71858FG
F71862FG
F71863FG
F71869F/[31mCONFIG_E[0m/[31mCONFIG_A[0m
F71882FG
F71883FG
F71889FG/ED/[31mCONFIG_A[0m
F8000
F81801U
F81865F
This driver can also be built as a module. If so, the module
will be called f71882fg.
config [31mCONFIG_SENSORS_F75375S[0m
tristate "Fintek F75375S/SP, F75373 and F75387"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for hardware monitoring
features of the Fintek F75375S/SP, F75373 and F75387
This driver can also be built as a module. If so, the module
will be called f75375s.
config [31mCONFIG_SENSORS_MC13783_ADC[0m
tristate "Freescale MC13783/MC13892 ADC"
depends on [31mCONFIG_MFD_MC13XXX[0m
help
Support for the [31mCONFIG_A[0m/[31mCONFIG_D[0m converter on MC13783 and MC13892 PMIC.
config [31mCONFIG_SENSORS_FSCHMD[0m
tristate "Fujitsu Siemens Computers sensor chips"
depends on [31mCONFIG_X86[0m && [31mCONFIG_I2C[0m
help
If you say yes here you get support for the following Fujitsu
Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
Heimdall, Heracles, Hades and Syleus including support for the
integrated watchdog.
This is a merged driver for FSC sensor chips replacing the fscpos,
fscscy and fscher drivers and adding support for several other FSC
sensor chips.
This driver can also be built as a module. If so, the module
will be called fschmd.
config [31mCONFIG_SENSORS_FTSTEUTATES[0m
tristate "Fujitsu Technology Solutions sensor chip Teutates"
depends on [31mCONFIG_I2C[0m && [31mCONFIG_WATCHDOG[0m
select [31mCONFIG_WATCHDOG_CORE[0m
help
If you say yes here you get support for the Fujitsu Technology
Solutions (FTS) sensor chip "Teutates" including support for
the integrated watchdog.
This driver can also be built as a module. If so, the module
will be called ftsteutates.
config [31mCONFIG_SENSORS_GL518SM[0m
tristate "Genesys Logic GL518SM"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Genesys Logic GL518SM
sensor chips.
This driver can also be built as a module. If so, the module
will be called gl518sm.
config [31mCONFIG_SENSORS_GL520SM[0m
tristate "Genesys Logic GL520SM"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for Genesys Logic GL520SM
sensor chips.
This driver can also be built as a module. If so, the module
will be called gl520sm.
config [31mCONFIG_SENSORS_G760A[0m
tristate "GMT G760A"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Global Mixed-mode
Technology Inc G760A fan speed [31mCONFIG_PWM[0m controller chips.
This driver can also be built as a module. If so, the module
will be called g760a.
config [31mCONFIG_SENSORS_G762[0m
tristate "GMT G762 and G763"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Global Mixed-mode
Technology Inc G762 and G763 fan speed [31mCONFIG_PWM[0m controller chips.
This driver can also be built as a module. If so, the module
will be called g762.
config [31mCONFIG_SENSORS_GPIO_FAN[0m
tristate "GPIO fan"
depends on [31mCONFIG_OF_GPIO[0m
depends on [31mCONFIG_GPIOLIB[0m || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_THERMAL[0m || [31mCONFIG_THERMAL[0m=n
help
If you say yes here you get support for fans connected to GPIO lines.
This driver can also be built as a module. If so, the module
will be called gpio-fan.
config [31mCONFIG_SENSORS_HIH6130[0m
tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Honeywell Humidicon
HIH-6130 and HIH-6131 Humidicon humidity sensors.
This driver can also be built as a module. If so, the module
will be called hih6130.
config [31mCONFIG_SENSORS_IBMAEM[0m
tristate "IBM Active Energy Manager temperature/power sensors and control"
select [31mCONFIG_IPMI_SI[0m
depends on [31mCONFIG_IPMI_HANDLER[0m
help
If you say yes here you get support for the temperature and
power sensors and capping hardware in various IBM System X
servers that support Active Energy Manager. This includes
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
and certain HC10/HS2x/LS2x/QS2x blades.
This driver can also be built as a module. If so, the module
will be called ibmaem.
config [31mCONFIG_SENSORS_IBMPEX[0m
tristate "IBM PowerExecutive temperature/power sensors"
select [31mCONFIG_IPMI_SI[0m
depends on [31mCONFIG_IPMI_HANDLER[0m
help
If you say yes here you get support for the temperature and
power sensors in various IBM System X servers that support
PowerExecutive. So far this includes the x3350, x3550, x3650,
x3655, and x3755; the x3800, x3850, and x3950 models that have
[31mCONFIG_PCI[0m Express; and some of the HS2x, LS2x, and QS2x blades.
This driver can also be built as a module. If so, the module
will be called ibmpex.
config [31mCONFIG_SENSORS_IBMPOWERNV[0m
tristate "IBM POWERNV platform sensors"
depends on [31mCONFIG_PPC_POWERNV[0m
default y
help
If you say yes here you get support for the temperature/fan/power
sensors on your PowerNV platform.
This driver can also be built as a module. If so, the module
will be called ibmpowernv.
config [31mCONFIG_SENSORS_IIO_HWMON[0m
tristate "Hwmon driver that uses channels specified via iio maps"
depends on [31mCONFIG_IIO[0m
help
This is a platform driver that in combination with a suitable
map allows [31mCONFIG_IIO[0m devices to provide basic hwmon functionality
for those channels specified in the map. This map can be provided
either via platform data or the device tree bindings.
config [31mCONFIG_SENSORS_I5500[0m
tristate "Intel 5500/5520/X58 temperature sensor"
depends on [31mCONFIG_X86[0m && [31mCONFIG_PCI[0m
help
If you say yes here you get support for the temperature
sensor inside the Intel 5500, 5520 and X58 chipsets.
This driver can also be built as a module. If so, the module
will be called i5500_temp.
config [31mCONFIG_SENSORS_CORETEMP[0m
tristate "Intel Core/Core2/Atom temperature sensor"
depends on [31mCONFIG_X86[0m
help
If you say yes here you get support for the temperature
sensor inside your CPU. Most of the family 6 CPUs
are supported. Check Documentation/hwmon/coretemp.rst for details.
config [31mCONFIG_SENSORS_IT87[0m
tristate "ITE IT87xx and compatibles"
depends on ![31mCONFIG_PPC[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
clone.
This driver can also be built as a module. If so, the module
will be called it87.
config [31mCONFIG_SENSORS_JC42[0m
tristate "JEDEC JC42.4 compliant memory module temperature sensors"
depends on [31mCONFIG_I2C[0m
help
If you say yes here, you get support for JEDEC JC42.4 compliant
temperature sensors, which are used on many DDR3 memory modules for
mobile devices and servers. Support will include, but not be limited
to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
STTS424([31mCONFIG_E[0m), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
This driver can also be built as a module. If so, the module
will be called jc42.
config [31mCONFIG_SENSORS_POWR1220[0m
tristate "Lattice POWR1220 Power Monitoring"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get access to the hardware monitoring
functions of the Lattice POWR1220 isp Power Supply Monitoring,
Sequencing and Margining Controller.
This driver can also be built as a module. If so, the module
will be called powr1220.
config [31mCONFIG_SENSORS_LINEAGE[0m
tristate "Lineage Compact Power Line Power Entry Module"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Lineage Compact Power Line
series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
CP2000DC, CP2725, and others.
This driver can also be built as a module. If so, the module
will be called lineage-pem.
config [31mCONFIG_SENSORS_LOCHNAGAR[0m
tristate "Lochnagar Hardware Monitor"
depends on [31mCONFIG_MFD_LOCHNAGAR[0m
help
If you say yes here you get support for Lochnagar 2 temperature,
voltage and current sensors abilities.
This driver can also be built as a module. If so, the module
will be called lochnagar-hwmon.
config [31mCONFIG_SENSORS_LTC2945[0m
tristate "Linear Technology LTC2945"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for Linear Technology LTC2945
[31mCONFIG_I2C[0m System Monitor.
This driver can also be built as a module. If so, the module will
be called ltc2945.
config [31mCONFIG_SENSORS_LTC2990[0m
tristate "Linear Technology LTC2990"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Linear Technology LTC2990
[31mCONFIG_I2C[0m System Monitor. The LTC2990 supports a combination of voltage,
current and temperature monitoring.
This driver can also be built as a module. If so, the module will
be called ltc2990.
config [31mCONFIG_SENSORS_LTC4151[0m
tristate "Linear Technology LTC4151"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Linear Technology LTC4151
High Voltage [31mCONFIG_I2C[0m Current and Voltage Monitor interface.
This driver can also be built as a module. If so, the module will
be called ltc4151.
config [31mCONFIG_SENSORS_LTC4215[0m
tristate "Linear Technology LTC4215"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Linear Technology LTC4215
Hot Swap Controller [31mCONFIG_I2C[0m interface.
This driver can also be built as a module. If so, the module will
be called ltc4215.
config [31mCONFIG_SENSORS_LTC4222[0m
tristate "Linear Technology LTC4222"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for Linear Technology LTC4222
Dual Hot Swap Controller [31mCONFIG_I2C[0m interface.
This driver can also be built as a module. If so, the module will
be called ltc4222.
config [31mCONFIG_SENSORS_LTC4245[0m
tristate "Linear Technology LTC4245"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Linear Technology LTC4245
Multiple Supply Hot Swap Controller [31mCONFIG_I2C[0m interface.
This driver can also be built as a module. If so, the module will
be called ltc4245.
config [31mCONFIG_SENSORS_LTC4260[0m
tristate "Linear Technology LTC4260"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for Linear Technology LTC4260
Positive Voltage Hot Swap Controller [31mCONFIG_I2C[0m interface.
This driver can also be built as a module. If so, the module will
be called ltc4260.
config [31mCONFIG_SENSORS_LTC4261[0m
tristate "Linear Technology LTC4261"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Linear Technology LTC4261
Negative Voltage Hot Swap Controller [31mCONFIG_I2C[0m interface.
This driver can also be built as a module. If so, the module will
be called ltc4261.
config [31mCONFIG_SENSORS_LTQ_CPUTEMP[0m
bool "Lantiq cpu temperature sensor driver"
depends on [31mCONFIG_LANTIQ[0m
help
If you say yes here you get support for the temperature
sensor inside your CPU.
config [31mCONFIG_SENSORS_MAX1111[0m
tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
depends on [31mCONFIG_SPI_MASTER[0m
help
Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
ADC chips.
This driver can also be built as a module. If so, the module
will be called max1111.
config [31mCONFIG_SENSORS_MAX16065[0m
tristate "Maxim MAX16065 System Manager and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for hardware monitoring
capabilities of the following Maxim System Manager chips.
MAX16065
MAX16066
MAX16067
MAX16068
MAX16070
MAX16071
This driver can also be built as a module. If so, the module
will be called max16065.
config [31mCONFIG_SENSORS_MAX1619[0m
tristate "Maxim MAX1619 sensor chip"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for MAX1619 sensor chip.
This driver can also be built as a module. If so, the module
will be called max1619.
config [31mCONFIG_SENSORS_MAX1668[0m
tristate "Maxim MAX1668 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for MAX1668, MAX1989 and
MAX1805 chips.
This driver can also be built as a module. If so, the module
will be called max1668.
config [31mCONFIG_SENSORS_MAX197[0m
tristate "Maxim MAX197 and compatibles"
help
Support for the Maxim MAX197 [31mCONFIG_A[0m/[31mCONFIG_D[0m converter.
Support will include, but not be limited to, MAX197, and MAX199.
This driver can also be built as a module. If so, the module
will be called max197.
config [31mCONFIG_SENSORS_MAX31722[0m
tristate "MAX31722 temperature sensor"
depends on [31mCONFIG_SPI[0m
help
Support for the Maxim Integrated MAX31722/MAX31723 digital
thermometers/thermostats operating over an [31mCONFIG_SPI[0m interface.
This driver can also be built as a module. If so, the module
will be called max31722.
config [31mCONFIG_SENSORS_MAX6621[0m
tristate "Maxim MAX6621 sensor chip"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for MAX6621 sensor chip.
MAX6621 is a PECI-to-[31mCONFIG_I2C[0m translator provides an efficient,
low-cost solution for PECI-to-SMBus/[31mCONFIG_I2C[0m protocol conversion.
It allows reading the temperature from the PECI-compliant
host directly from up to four PECI-enabled CPUs.
This driver can also be built as a module. If so, the module
will be called max6621.
config [31mCONFIG_SENSORS_MAX6639[0m
tristate "Maxim MAX6639 sensor chip"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the MAX6639
sensor chips.
This driver can also be built as a module. If so, the module
will be called max6639.
config [31mCONFIG_SENSORS_MAX6642[0m
tristate "Maxim MAX6642 sensor chip"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for MAX6642 sensor chip.
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
with Overtemperature Alarm from Maxim.
This driver can also be built as a module. If so, the module
will be called max6642.
config [31mCONFIG_SENSORS_MAX6650[0m
tristate "Maxim MAX6650 sensor chip"
depends on [31mCONFIG_I2C[0m
depends on [31mCONFIG_THERMAL[0m || [31mCONFIG_THERMAL[0m=n
help
If you say yes here you get support for the MAX6650 / MAX6651
sensor chips.
This driver can also be built as a module. If so, the module
will be called max6650.
config [31mCONFIG_SENSORS_MAX6697[0m
tristate "Maxim MAX6697 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for MAX6581, MAX6602, MAX6622,
MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called max6697.
config [31mCONFIG_SENSORS_MAX31790[0m
tristate "Maxim MAX31790 sensor chip"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for 6-Channel [31mCONFIG_PWM[0m-Output
Fan RPM Controller.
This driver can also be built as a module. If so, the module
will be called max31790.
config [31mCONFIG_SENSORS_MCP3021[0m
tristate "Microchip MCP3021 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for MCP3021 and MCP3221.
The MCP3021 is a [31mCONFIG_A[0m/[31mCONFIG_D[0m converter (ADC) with 10-bit and the MCP3221
with 12-bit resolution.
This driver can also be built as a module. If so, the module
will be called mcp3021.
config [31mCONFIG_SENSORS_MLXREG_FAN[0m
tristate "Mellanox Mellanox FAN driver"
depends on [31mCONFIG_MELLANOX_PLATFORM[0m
imply [31mCONFIG_THERMAL[0m
select [31mCONFIG_REGMAP[0m
help
This option enables support for the FAN control on the Mellanox
Ethernet and InfiniBand switches. The driver can be activated by the
platform device add call. Say Y to enable these. To compile this
driver as a module, choose '[31mCONFIG_M[0m' here: the module will be called
mlxreg-fan.
config [31mCONFIG_SENSORS_TC654[0m
tristate "Microchip TC654/TC655 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for TC654 and TC655.
The TC654 and TC655 are [31mCONFIG_PWM[0m mode fan speed controllers with
FanSense technology for use with brushless DC fans.
This driver can also be built as a module. If so, the module
will be called tc654.
config [31mCONFIG_SENSORS_MENF21BMC_HWMON[0m
tristate "MEN 14F021P00 BMC Hardware Monitoring"
depends on [31mCONFIG_MFD_MENF21BMC[0m
help
Say Y here to include support for the MEN 14F021P00 BMC
hardware monitoring.
This driver can also be built as a module. If so the module
will be called menf21bmc_hwmon.
config [31mCONFIG_SENSORS_ADCXX[0m
tristate "National Semiconductor ADCxxxSxxx"
depends on [31mCONFIG_SPI_MASTER[0m
help
If you say yes here you get support for the National Semiconductor
ADC<bb><c>S<sss> chip family, where
* bb is the resolution in number of bits (8, 10, 12)
* c is the number of channels (1, 2, 4, 8)
* sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
kSPS and 101 for 1 MSPS)
Examples : ADC081S101, ADC124S501, ...
This driver can also be built as a module. If so, the module
will be called adcxx.
config [31mCONFIG_SENSORS_LM63[0m
tristate "National Semiconductor LM63 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the National
Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
sensors with integrated fan control. Such chips are found
on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
others.
This driver can also be built as a module. If so, the module
will be called lm63.
config [31mCONFIG_SENSORS_LM70[0m
tristate "National Semiconductor LM70 and compatibles"
depends on [31mCONFIG_SPI_MASTER[0m
help
If you say yes here you get support for the National Semiconductor
LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
ture sensor chips.
This driver can also be built as a module. If so, the module
will be called lm70.
config [31mCONFIG_SENSORS_LM73[0m
tristate "National Semiconductor LM73"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for National Semiconductor LM73
sensor chips.
This driver can also be built as a module. If so, the module
will be called lm73.
config [31mCONFIG_SENSORS_LM75[0m
tristate "National Semiconductor LM75 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for one common type of
temperature sensor chip, with models including:
- Analog Devices ADT75
- Dallas Semiconductor DS75, DS1775 and DS7505
- Global Mixed-mode Technology (GMT) G751
- Maxim MAX6625 and MAX6626
- Microchip MCP980x
- National Semiconductor LM75, LM75A
- NXP's LM75A
- ST Microelectronics STDS75
- ST Microelectronics STLM75
- TelCom (now Microchip) TCN75
- Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
TMP175, TMP275
This driver supports driver model based binding through board
specific [31mCONFIG_I2C[0m device tables.
It also supports the "legacy" style of driver binding. To use
that with some chips which don't replicate LM75 quirks exactly,
you may need the "force" module parameter.
This driver can also be built as a module. If so, the module
will be called lm75.
config [31mCONFIG_SENSORS_LM77[0m
tristate "National Semiconductor LM77"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for National Semiconductor LM77
sensor chips.
This driver can also be built as a module. If so, the module
will be called lm77.
config [31mCONFIG_SENSORS_LM78[0m
tristate "National Semiconductor LM78 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for National Semiconductor LM78,
LM78-J and LM79.
This driver can also be built as a module. If so, the module
will be called lm78.
config [31mCONFIG_SENSORS_LM80[0m
tristate "National Semiconductor LM80 and LM96080"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for National Semiconductor
LM80 and LM96080 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm80.
config [31mCONFIG_SENSORS_LM83[0m
tristate "National Semiconductor LM83 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for National Semiconductor
LM82 and LM83 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm83.
config [31mCONFIG_SENSORS_LM85[0m
tristate "National Semiconductor LM85 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for National Semiconductor LM85
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
EMC6D101, EMC6D102, and EMC6D103.
This driver can also be built as a module. If so, the module
will be called lm85.
config [31mCONFIG_SENSORS_LM87[0m
tristate "National Semiconductor LM87 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for National Semiconductor LM87
and Analog Devices ADM1024 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm87.
config [31mCONFIG_SENSORS_LM90[0m
tristate "National Semiconductor LM90 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for National Semiconductor LM90,
LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
Winbond/Nuvoton W83L771W/[31mCONFIG_G[0m/AWG/ASG, Philips SA56004, GMT G781, and
Texas Instruments TMP451 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.
config [31mCONFIG_SENSORS_LM92[0m
tristate "National Semiconductor LM92 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.
This driver can also be built as a module. If so, the module
will be called lm92.
config [31mCONFIG_SENSORS_LM93[0m
tristate "National Semiconductor LM93 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for National Semiconductor LM93,
LM94, and compatible sensor chips.
This driver can also be built as a module. If so, the module
will be called lm93.
config [31mCONFIG_SENSORS_LM95234[0m
tristate "National Semiconductor LM95234 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the LM95233 and LM95234
temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called lm95234.
config [31mCONFIG_SENSORS_LM95241[0m
tristate "National Semiconductor LM95241 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for LM95231 and LM95241 sensor
chips.
This driver can also be built as a module. If so, the module
will be called lm95241.
config [31mCONFIG_SENSORS_LM95245[0m
tristate "National Semiconductor LM95245 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for LM95235 and LM95245
temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called lm95245.
config [31mCONFIG_SENSORS_PC87360[0m
tristate "National Semiconductor PC87360 family"
depends on ![31mCONFIG_PPC[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC8736x Super-I/O chips.
The PC87360, PC87363 and PC87364 only have fan monitoring and
control. The PC87365 and PC87366 additionally have voltage and
temperature monitoring.
This driver can also be built as a module. If so, the module
will be called pc87360.
config [31mCONFIG_SENSORS_PC87427[0m
tristate "National Semiconductor PC87427"
depends on ![31mCONFIG_PPC[0m
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC87427 Super-I/O chip.
The chip has two distinct logical devices, one for fan speed
monitoring and control, and one for voltage and temperature
monitoring. Fan speed monitoring and control are supported, as
well as temperature monitoring. Voltages aren't supported yet.
This driver can also be built as a module. If so, the module
will be called pc87427.
config [31mCONFIG_SENSORS_NTC_THERMISTOR[0m
tristate "NTC thermistor support from Murata"
depends on ![31mCONFIG_OF[0m || [31mCONFIG_IIO[0m=n || [31mCONFIG_IIO[0m
depends on [31mCONFIG_THERMAL[0m || ![31mCONFIG_THERMAL_OF[0m
help
This driver supports NTC thermistors sensor reading and its
interpretation. The driver can also monitor the temperature and
send notifications about the temperature.
Currently, this driver supports
NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
B57891S0103 from EPCOS.
This driver can also be built as a module. If so, the module
will be called ntc-thermistor.
config [31mCONFIG_SENSORS_NCT6683[0m
tristate "Nuvoton NCT6683D"
depends on ![31mCONFIG_PPC[0m
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6683D eSIO chip.
This driver can also be built as a module. If so, the module
will be called nct6683.
config [31mCONFIG_SENSORS_NCT6775[0m
tristate "Nuvoton NCT6775F and compatibles"
depends on ![31mCONFIG_PPC[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
Super-I/O chips. This driver replaces the w83627ehf driver for
NCT6775F and NCT6776F.
This driver can also be built as a module. If so, the module
will be called nct6775.
config [31mCONFIG_SENSORS_NCT7802[0m
tristate "Nuvoton NCT7802Y"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for the Nuvoton NCT7802Y
hardware monitoring chip.
This driver can also be built as a module. If so, the module
will be called nct7802.
config [31mCONFIG_SENSORS_NCT7904[0m
tristate "Nuvoton NCT7904"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Nuvoton NCT7904
hardware monitoring chip, including manual fan speed control.
This driver can also be built as a module. If so, the module
will be called nct7904.
config [31mCONFIG_SENSORS_NPCM7XX[0m
tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
imply [31mCONFIG_THERMAL[0m
help
This driver provides support for Nuvoton NPCM750/730/715/705 [31mCONFIG_PWM[0m
and Fan controllers.
This driver can also be built as a module. If so, the module
will be called npcm750-pwm-fan.
config [31mCONFIG_SENSORS_NSA320[0m
tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
depends on [31mCONFIG_GPIOLIB[0m && [31mCONFIG_OF[0m
depends on [31mCONFIG_MACH_KIRKWOOD[0m || [31mCONFIG_COMPILE_TEST[0m
help
If you say yes here you get support for hardware monitoring
for the ZyXEL NSA320 Media Server and other compatible devices
(probably the NSA325 and some NSA310 variants).
The sensor data is taken from a Holtek HT46R065 microcontroller
connected to GPIO lines.
This driver can also be built as a module. If so, the module
will be called nsa320-hwmon.
source "drivers/hwmon/occ/Kconfig"
config [31mCONFIG_SENSORS_PCF8591[0m
tristate "Philips PCF8591 ADC/DAC"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Philips PCF8591 4-channel
ADC, 1-channel DAC chips.
This driver can also be built as a module. If so, the module
will be called pcf8591.
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
source "drivers/hwmon/pmbus/Kconfig"
config [31mCONFIG_SENSORS_PWM_FAN[0m
tristate "PWM fan"
depends on ([31mCONFIG_PWM[0m && [31mCONFIG_OF[0m) || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_THERMAL[0m || [31mCONFIG_THERMAL[0m=n
help
If you say yes here you get support for fans connected to [31mCONFIG_PWM[0m lines.
The driver uses the generic [31mCONFIG_PWM[0m interface, thus it will work on a
variety of SoCs.
This driver can also be built as a module. If so, the module
will be called pwm-fan.
config [31mCONFIG_SENSORS_RASPBERRYPI_HWMON[0m
tristate "Raspberry Pi voltage monitor"
depends on [31mCONFIG_RASPBERRYPI_FIRMWARE[0m || ([31mCONFIG_COMPILE_TEST[0m && ![31mCONFIG_RASPBERRYPI_FIRMWARE[0m)
help
If you say yes here you get support for voltage sensor on the
Raspberry Pi.
This driver can also be built as a module. If so, the module
will be called raspberrypi-hwmon.
config [31mCONFIG_SENSORS_SHT15[0m
tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
depends on [31mCONFIG_GPIOLIB[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_BITREVERSE[0m
help
If you say yes here you get support for the Sensiron SHT10, SHT11,
SHT15, SHT71, SHT75 humidity and temperature sensors.
This driver can also be built as a module. If so, the module
will be called sht15.
config [31mCONFIG_SENSORS_SHT21[0m
tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Sensiron SHT21, SHT25
humidity and temperature sensors.
This driver can also be built as a module. If so, the module
will be called sht21.
config [31mCONFIG_SENSORS_SHT3x[0m
tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_CRC8[0m
help
If you say yes here you get support for the Sensiron SHT30 and SHT31
humidity and temperature sensors.
This driver can also be built as a module. If so, the module
will be called sht3x.
config [31mCONFIG_SENSORS_SHTC1[0m
tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Sensiron SHTC1, SHTW1,
and SHTC3 humidity and temperature sensors.
This driver can also be built as a module. If so, the module
will be called shtc1.
config [31mCONFIG_SENSORS_S3C[0m
tristate "Samsung built-in ADC"
depends on [31mCONFIG_S3C_ADC[0m
help
If you say yes here you get support for the on-board ADCs of
the Samsung S3C24XX, S3C64XX and other series of SoC
This driver can also be built as a module. If so, the module
will be called s3c-hwmon.
config [31mCONFIG_SENSORS_S3C_RAW[0m
bool "Include raw channel attributes in sysfs"
depends on [31mCONFIG_SENSORS_S3C[0m
help
Say Y here if you want to include raw copies of all the ADC
channels in sysfs.
config [31mCONFIG_SENSORS_SIS5595[0m
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on [31mCONFIG_PCI[0m
help
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
This driver can also be built as a module. If so, the module
will be called sis5595.
config [31mCONFIG_SENSORS_DME1737[0m
tristate "SMSC DME1737, SCH311x and compatibles"
depends on [31mCONFIG_I2C[0m && ![31mCONFIG_PPC[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the hardware monitoring
and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
Asus A8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called dme1737.
config [31mCONFIG_SENSORS_EMC1403[0m
tristate "SMSC EMC1403/23 thermal sensor"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for the SMSC EMC1403/23
temperature monitoring chip.
Threshold values can be configured using sysfs.
Data from the different diodes are accessible via sysfs.
config [31mCONFIG_SENSORS_EMC2103[0m
tristate "SMSC EMC2103"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the temperature
and fan sensors of the SMSC EMC2103 chips.
This driver can also be built as a module. If so, the module
will be called emc2103.
config [31mCONFIG_SENSORS_EMC6W201[0m
tristate "SMSC EMC6W201"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the SMSC EMC6W201
hardware monitoring chip.
This driver can also be built as a module. If so, the module
will be called emc6w201.
config [31mCONFIG_SENSORS_SMSC47M1[0m
tristate "SMSC LPC47M10x and compatibles"
depends on ![31mCONFIG_PPC[0m
help
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
LPC47M192, LPC47M292 and LPC47M997 chips.
The temperature and voltage sensor features of the LPC47M15x,
LPC47M192, LPC47M292 and LPC47M997 are supported by another
driver, select also "SMSC LPC47M192 and compatibles" below for
those.
This driver can also be built as a module. If so, the module
will be called smsc47m1.
config [31mCONFIG_SENSORS_SMSC47M192[0m
tristate "SMSC LPC47M192 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the temperature and
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
and LPC47M997 chips.
The fan monitoring and control capabilities of these chips
are supported by another driver, select
"SMSC LPC47M10x and compatibles" above. You need both drivers
if you want fan control and voltage/temperature sensor support.
This driver can also be built as a module. If so, the module
will be called smsc47m192.
config [31mCONFIG_SENSORS_SMSC47B397[0m
tristate "SMSC LPC47B397-NC"
depends on ![31mCONFIG_PPC[0m
help
If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.
This driver can also be built as a module. If so, the module
will be called smsc47b397.
config [31mCONFIG_SENSORS_SCH56XX_COMMON[0m
tristate
config [31mCONFIG_SENSORS_SCH5627[0m
tristate "SMSC SCH5627"
depends on ![31mCONFIG_PPC[0m && [31mCONFIG_WATCHDOG[0m
select [31mCONFIG_SENSORS_SCH56XX_COMMON[0m
select [31mCONFIG_WATCHDOG_CORE[0m
help
If you say yes here you get support for the hardware monitoring
features of the SMSC SCH5627 Super-I/O chip including support for
the integrated watchdog.
This driver can also be built as a module. If so, the module
will be called sch5627.
config [31mCONFIG_SENSORS_SCH5636[0m
tristate "SMSC SCH5636"
depends on ![31mCONFIG_PPC[0m && [31mCONFIG_WATCHDOG[0m
select [31mCONFIG_SENSORS_SCH56XX_COMMON[0m
select [31mCONFIG_WATCHDOG_CORE[0m
help
SMSC SCH5636 Super I/O chips include an embedded microcontroller for
hardware monitoring solutions, allowing motherboard manufacturers to
create their own custom hwmon solution based upon the SCH5636.
Currently this driver only supports the Fujitsu Theseus SCH5636 based
hwmon solution. Say yes here if you want support for the Fujitsu
Theseus' hardware monitoring features including support for the
integrated watchdog.
This driver can also be built as a module. If so, the module
will be called sch5636.
config [31mCONFIG_SENSORS_STTS751[0m
tristate "ST Microelectronics STTS751"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for STTS751
temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called stts751.
config [31mCONFIG_SENSORS_SMM665[0m
tristate "Summit Microelectronics SMM665"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the hardware monitoring
features of the Summit Microelectronics SMM665/SMM665B Six-Channel
Active DC Output Controller / Monitor.
Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
Support for those chips is untested.
This driver can also be built as a module. If so, the module will
be called smm665.
config [31mCONFIG_SENSORS_ADC128D818[0m
tristate "Texas Instruments ADC128D818"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Texas Instruments
ADC128D818 System Monitor with Temperature Sensor chip.
This driver can also be built as a module. If so, the module
will be called adc128d818.
config [31mCONFIG_SENSORS_ADS7828[0m
tristate "Texas Instruments ADS7828 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for Texas Instruments ADS7828 and
ADS7830 8-channel [31mCONFIG_A[0m/[31mCONFIG_D[0m converters. ADS7828 resolution is 12-bit, while
it is 8-bit on ADS7830.
This driver can also be built as a module. If so, the module
will be called ads7828.
config [31mCONFIG_SENSORS_ADS7871[0m
tristate "Texas Instruments ADS7871 A/D converter"
depends on [31mCONFIG_SPI[0m
help
If you say yes here you get support for TI ADS7871 & ADS7870
This driver can also be built as a module. If so, the module
will be called ads7871.
config [31mCONFIG_SENSORS_AMC6821[0m
tristate "Texas Instruments AMC6821"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Texas Instruments
AMC6821 hardware monitoring chips.
This driver can also be built as a module. If so, the module
will be called amc6821.
config [31mCONFIG_SENSORS_INA209[0m
tristate "TI / Burr Brown INA209"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the TI / Burr Brown INA209
voltage / current / power monitor [31mCONFIG_I2C[0m interface.
This driver can also be built as a module. If so, the module will
be called ina209.
config [31mCONFIG_SENSORS_INA2XX[0m
tristate "Texas Instruments INA219 and compatibles"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for INA219, INA220, INA226,
INA230, and INA231 power monitor chips.
The INA2xx driver is configured for the default configuration of
the part as described in the datasheet.
Default value for Rshunt is 10 mOhms.
This driver can also be built as a module. If so, the module
will be called ina2xx.
config [31mCONFIG_SENSORS_INA3221[0m
tristate "Texas Instruments INA3221 Triple Power Monitor"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for the TI INA3221 Triple Power
Monitor.
This driver can also be built as a module. If so, the module
will be called ina3221.
config [31mCONFIG_SENSORS_TC74[0m
tristate "Microchip TC74"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Microchip TC74 single
input temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called tc74.
config [31mCONFIG_SENSORS_THMC50[0m
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Texas Instruments THMC50
sensor chips and clones: the Analog Devices ADM1022.
This driver can also be built as a module. If so, the module
will be called thmc50.
config [31mCONFIG_SENSORS_TMP102[0m
tristate "Texas Instruments TMP102"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for Texas Instruments TMP102
sensor chips.
This driver can also be built as a module. If so, the module
will be called tmp102.
config [31mCONFIG_SENSORS_TMP103[0m
tristate "Texas Instruments TMP103"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for Texas Instruments TMP103
sensor chips.
This driver can also be built as a module. If so, the module
will be called tmp103.
config [31mCONFIG_SENSORS_TMP108[0m
tristate "Texas Instruments TMP108"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for Texas Instruments TMP108
sensor chips.
This driver can also be built as a module. If so, the module
will be called tmp108.
config [31mCONFIG_SENSORS_TMP401[0m
tristate "Texas Instruments TMP401 and compatibles"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Texas Instruments TMP401,
TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called tmp401.
config [31mCONFIG_SENSORS_TMP421[0m
tristate "Texas Instruments TMP421 and compatible"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for Texas Instruments TMP421,
TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called tmp421.
config [31mCONFIG_SENSORS_VEXPRESS[0m
tristate "Versatile Express"
depends on [31mCONFIG_VEXPRESS_CONFIG[0m
help
This driver provides support for hardware sensors available on
the [31mCONFIG_ARM[0m Ltd's Versatile Express platform. It can provide wide
range of information like temperature, power, energy.
config [31mCONFIG_SENSORS_VIA_CPUTEMP[0m
tristate "VIA CPU temperature sensor"
depends on [31mCONFIG_X86[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the temperature
sensor inside your CPU. Supported are all known variants of
the VIA C7 and Nano.
config [31mCONFIG_SENSORS_VIA686A[0m
tristate "VIA686A"
depends on [31mCONFIG_PCI[0m
help
If you say yes here you get support for the integrated sensors in
Via 686A/[31mCONFIG_B[0m South Bridges.
This driver can also be built as a module. If so, the module
will be called via686a.
config [31mCONFIG_SENSORS_VT1211[0m
tristate "VIA VT1211"
depends on ![31mCONFIG_PPC[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here then you get support for hardware monitoring
features of the VIA VT1211 Super-I/O chip.
This driver can also be built as a module. If so, the module
will be called vt1211.
config [31mCONFIG_SENSORS_VT8231[0m
tristate "VIA VT8231"
depends on [31mCONFIG_PCI[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.
This driver can also be built as a module. If so, the module
will be called vt8231.
config [31mCONFIG_SENSORS_W83773G[0m
tristate "Nuvoton W83773G"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_REGMAP_I2C[0m
help
If you say yes here you get support for the Nuvoton W83773G hardware
monitoring chip.
This driver can also be built as a module. If so, the module
will be called w83773g.
config [31mCONFIG_SENSORS_W83781D[0m
tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the Winbond W8378x series
of sensor chips: the W83781D, W83782D and W83783S, and the similar
Asus AS99127F.
This driver can also be built as a module. If so, the module
will be called w83781d.
config [31mCONFIG_SENSORS_W83791D[0m
tristate "Winbond W83791D"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the Winbond W83791D chip.
This driver can also be built as a module. If so, the module
will be called w83791d.
config [31mCONFIG_SENSORS_W83792D[0m
tristate "Winbond W83792D"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Winbond W83792D chip.
This driver can also be built as a module. If so, the module
will be called w83792d.
config [31mCONFIG_SENSORS_W83793[0m
tristate "Winbond W83793"
depends on [31mCONFIG_I2C[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the Winbond W83793
hardware monitoring chip, including support for the integrated
watchdog.
This driver can also be built as a module. If so, the module
will be called w83793.
config [31mCONFIG_SENSORS_W83795[0m
tristate "Winbond/Nuvoton W83795G/ADG"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Winbond W83795G and
W83795ADG hardware monitoring chip, including manual fan speed
control.
This driver can also be built as a module. If so, the module
will be called w83795.
config [31mCONFIG_SENSORS_W83795_FANCTRL[0m
bool "Include automatic fan control support"
depends on [31mCONFIG_SENSORS_W83795[0m
help
If you say yes here, support for automatic fan speed control
will be included in the driver.
Please also note that this option will create sysfs attribute
files which may change in the future, so you shouldn't rely
on them being stable.
config [31mCONFIG_SENSORS_W83L785TS[0m
tristate "Winbond W83L785TS-S"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Winbond W83L785TS-S
sensor chip, which is used on the Asus A7N8X, among other
motherboards.
This driver can also be built as a module. If so, the module
will be called w83l785ts.
config [31mCONFIG_SENSORS_W83L786NG[0m
tristate "Winbond W83L786NG, W83L786NR"
depends on [31mCONFIG_I2C[0m
help
If you say yes here you get support for the Winbond W83L786NG
and W83L786NR sensor chips.
This driver can also be built as a module. If so, the module
will be called w83l786ng.
config [31mCONFIG_SENSORS_W83627HF[0m
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
depends on ![31mCONFIG_PPC[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the Winbond W836X7 series
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
W83697HF.
This driver can also be built as a module. If so, the module
will be called w83627hf.
config [31mCONFIG_SENSORS_W83627EHF[0m
tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
depends on ![31mCONFIG_PPC[0m
select [31mCONFIG_HWMON_VID[0m
help
If you say yes here you get support for the hardware
monitoring functionality of the Winbond W83627EHF Super-I/O chip.
This driver also supports the W83627EHG, which is the lead-free
version of the W83627EHF, and the W83627DHG, which is a similar
chip suited for specific Intel processors that use PECI such as
the Core 2 Duo. And also the W83627UHG, which is a stripped down
version of the W83627DHG (as far as hardware monitoring goes.)
This driver also supports Nuvoton W83667HG, W83667HG-[31mCONFIG_B[0m, NCT6775F
(also known as W83667HG-I), and NCT6776F.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
config [31mCONFIG_SENSORS_WM831X[0m
tristate "WM831x PMICs"
depends on [31mCONFIG_MFD_WM831X[0m
help
If you say yes here you get support for the hardware
monitoring functionality of the Wolfson Microelectronics
WM831x series of PMICs.
This driver can also be built as a module. If so, the module
will be called wm831x-hwmon.
config [31mCONFIG_SENSORS_WM8350[0m
tristate "Wolfson Microelectronics WM835x"
depends on [31mCONFIG_MFD_WM8350[0m
help
If you say yes here you get support for the hardware
monitoring features of the WM835x series of PMICs.
This driver can also be built as a module. If so, the module
will be called wm8350-hwmon.
config [31mCONFIG_SENSORS_ULTRA45[0m
tristate "Sun Ultra45 PIC16F747"
depends on [31mCONFIG_SPARC64[0m
help
This driver provides support for the Ultra45 workstation environmental
sensors.
config [31mCONFIG_SENSORS_XGENE[0m
tristate "APM X-Gene SoC hardware monitoring driver"
depends on [31mCONFIG_XGENE_SLIMPRO_MBOX[0m || [31mCONFIG_PCC[0m
help
If you say yes here you get support for the temperature
and power sensors for [31mCONFIG_APM[0m X-Gene SoC.
if [31mCONFIG_ACPI[0m
comment "ACPI drivers"
config [31mCONFIG_SENSORS_ACPI_POWER[0m
tristate "ACPI 4.0 power meter"
help
This driver exposes [31mCONFIG_ACPI[0m 4.0 power meters as hardware monitoring
devices. Say Y (or [31mCONFIG_M[0m) if you have a computer with [31mCONFIG_ACPI[0m 4.0 firmware
and a power meter.
To compile this driver as a module, choose [31mCONFIG_M[0m here:
the module will be called acpi_power_meter.
config [31mCONFIG_SENSORS_ATK0110[0m
tristate "ASUS ATK0110"
depends on [31mCONFIG_X86[0m
help
If you say yes here you get support for the [31mCONFIG_ACPI[0m hardware
monitoring interface found in many ASUS motherboards. This
driver will provide readings of fans, voltages and temperatures
through the system firmware.
This driver can also be built as a module. If so, the module
will be called asus_atk0110.
endif # [31mCONFIG_ACPI[0m
endif # [31mCONFIG_HWMON[0m