# SPDX-License-Identifier: GPL-2.0-only
# ALSA [31mCONFIG_USB[0m drivers
menuconfig [31mCONFIG_SND_USB[0m
bool "USB sound devices"
depends on [31mCONFIG_USB[0m
default y
help
Support for sound devices connected via the [31mCONFIG_USB[0m bus.
if [31mCONFIG_SND_USB[0m && [31mCONFIG_USB[0m
config [31mCONFIG_SND_USB_AUDIO[0m
tristate "USB Audio/MIDI driver"
select [31mCONFIG_SND_HWDEP[0m
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_BITREVERSE[0m
select [31mCONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER[0m if [31mCONFIG_MEDIA_CONTROLLER[0m && ([31mCONFIG_MEDIA_SUPPORT[0m=y || [31mCONFIG_MEDIA_SUPPORT[0m=[31mCONFIG_SND_USB_AUDIO[0m)
help
Say Y here to include support for [31mCONFIG_USB[0m audio and [31mCONFIG_USB[0m MIDI
devices.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-usb-audio.
config [31mCONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER[0m
bool
config [31mCONFIG_SND_USB_UA101[0m
tristate "Edirol UA-101/UA-1000 driver"
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_RAWMIDI[0m
help
Say Y here to include support for the Edirol UA-101 and UA-1000
audio/MIDI interfaces.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-ua101.
config [31mCONFIG_SND_USB_USX2Y[0m
tristate "Tascam US-122, US-224 and US-428 USB driver"
depends on [31mCONFIG_X86[0m || [31mCONFIG_PPC[0m || [31mCONFIG_ALPHA[0m
select [31mCONFIG_SND_HWDEP[0m
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_PCM[0m
help
Say Y here to include support for Tascam [31mCONFIG_USB[0m Audio/MIDI
interfaces or controllers US-122, US-224 and US-428.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-usb-usx2y.
config [31mCONFIG_SND_USB_CAIAQ[0m
tristate "Native Instruments USB audio devices"
select [31mCONFIG_SND_HWDEP[0m
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_PCM[0m
help
Say Y here to include support for caiaq [31mCONFIG_USB[0m audio interfaces,
namely:
* Native Instruments RigKontrol2
* Native Instruments RigKontrol3
* Native Instruments Kore Controller
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
* Native Instruments Audio 2 DJ
* Native Instruments Audio 4 DJ
* Native Instruments Audio 8 DJ
* Native Instruments Traktor Audio 2
* Native Instruments Guitar Rig Session I/O
* Native Instruments Guitar Rig mobile
* Native Instruments Traktor Kontrol X1
* Native Instruments Traktor Kontrol S4
* Native Instruments Maschine Controller
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-usb-caiaq.
config [31mCONFIG_SND_USB_CAIAQ_INPUT[0m
bool "enable input device for controllers"
depends on [31mCONFIG_SND_USB_CAIAQ[0m
depends on [31mCONFIG_INPUT[0m=y || [31mCONFIG_INPUT[0m=[31mCONFIG_SND_USB_CAIAQ[0m
help
Say Y here to support input controllers like buttons, knobs,
alpha dials and analog pedals on the following products:
* Native Instruments RigKontrol2
* Native Instruments RigKontrol3
* Native Instruments Kore Controller
* Native Instruments Kore Controller 2
* Native Instruments Audio Kontrol 1
* Native Instruments Traktor Kontrol S4
* Native Instruments Maschine Controller
config [31mCONFIG_SND_USB_US122L[0m
tristate "Tascam US-122L USB driver"
depends on [31mCONFIG_X86[0m || [31mCONFIG_COMPILE_TEST[0m
select [31mCONFIG_SND_HWDEP[0m
select [31mCONFIG_SND_RAWMIDI[0m
help
Say Y here to include support for Tascam US-122L [31mCONFIG_USB[0m Audio/MIDI
interfaces.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-usb-us122l.
config [31mCONFIG_SND_USB_6FIRE[0m
tristate "TerraTec DMX 6Fire USB"
select [31mCONFIG_FW_LOADER[0m
select [31mCONFIG_BITREVERSE[0m
select [31mCONFIG_SND_RAWMIDI[0m
select [31mCONFIG_SND_PCM[0m
select [31mCONFIG_SND_VMASTER[0m
help
Say Y here to include support for TerraTec 6fire DMX [31mCONFIG_USB[0m interface.
You will need firmware files in order to be able to use the device
after it has been coldstarted. An install script for the firmware
and further help can be found at
http://sixfireusb.sourceforge.net
config [31mCONFIG_SND_USB_HIFACE[0m
tristate "M2Tech hiFace USB-SPDIF driver"
select [31mCONFIG_SND_PCM[0m
help
Select this option to include support for M2Tech hiFace [31mCONFIG_USB[0m-SPDIF
interface.
This driver supports the original M2Tech hiFace and some other
compatible devices. The supported products are:
* M2Tech Young
* M2Tech hiFace
* M2Tech North Star
* M2Tech W4S Young
* M2Tech Corrson
* M2Tech AUDIA
* M2Tech SL Audio
* M2Tech Empirical
* M2Tech Rockna
* M2Tech Pathos
* M2Tech Metronome
* M2Tech CAD
* M2Tech Audio Esclusive
* M2Tech Rotel
* M2Tech Eeaudio
* The Chord Company CHORD
* AVA Group [31mCONFIG_A[0m/S Vitus
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-usb-hiface.
config [31mCONFIG_SND_BCD2000[0m
tristate "Behringer BCD2000 MIDI driver"
select [31mCONFIG_SND_RAWMIDI[0m
help
Say Y here to include MIDI support for the Behringer BCD2000 DJ
controller.
Audio support is still work-in-progress at
https://github.com/anyc/snd-usb-bcd2000
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called snd-bcd2000.
source "sound/usb/line6/Kconfig"
endif # [31mCONFIG_SND_USB[0m