Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
* APM X-Gene SoC PMU bindings

This is APM X-Gene SoC PMU (Performance Monitoring Unit) module.
The following PMU devices are supported:

  L3C			- L3 cache controller
  IOB			- IO bridge
  MCB			- Memory controller bridge
  MC			- Memory controller

The following section describes the SoC PMU DT node binding.

Required properties:
- compatible		: Shall be "apm,xgene-pmu" for revision 1 or
                          "apm,xgene-pmu-v2" for revision 2.
- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
- reg			: First resource shall be the CPU bus PMU resource.
- interrupts            : Interrupt-specifier for PMU IRQ.

Required properties for L3C subnode:
- compatible		: Shall be "apm,xgene-pmu-l3c".
- reg			: First resource shall be the L3C PMU resource.

Required properties for IOB subnode:
- compatible		: Shall be "apm,xgene-pmu-iob".
- reg			: First resource shall be the IOB PMU resource.

Required properties for MCB subnode:
- compatible		: Shall be "apm,xgene-pmu-mcb".
- reg			: First resource shall be the MCB PMU resource.
- enable-bit-index	: The bit indicates if the according MCB is enabled.

Required properties for MC subnode:
- compatible		: Shall be "apm,xgene-pmu-mc".
- reg			: First resource shall be the MC PMU resource.
- enable-bit-index	: The bit indicates if the according MC is enabled.

Example:
	csw: csw@7e200000 {
		compatible = "apm,xgene-csw", "syscon";
		reg = <0x0 0x7e200000 0x0 0x1000>;
	};

	mcba: mcba@7e700000 {
		compatible = "apm,xgene-mcb", "syscon";
		reg = <0x0 0x7e700000 0x0 0x1000>;
	};

	mcbb: mcbb@7e720000 {
		compatible = "apm,xgene-mcb", "syscon";
		reg = <0x0 0x7e720000 0x0 0x1000>;
	};

	pmu: pmu@78810000 {
		compatible = "apm,xgene-pmu-v2";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;
		regmap-csw = <&csw>;
		regmap-mcba = <&mcba>;
		regmap-mcbb = <&mcbb>;
		reg = <0x0 0x78810000 0x0 0x1000>;
		interrupts = <0x0 0x22 0x4>;

		pmul3c@7e610000 {
			compatible = "apm,xgene-pmu-l3c";
			reg = <0x0 0x7e610000 0x0 0x1000>;
		};

		pmuiob@7e940000 {
			compatible = "apm,xgene-pmu-iob";
			reg = <0x0 0x7e940000 0x0 0x1000>;
		};

		pmucmcb@7e710000 {
			compatible = "apm,xgene-pmu-mcb";
			reg = <0x0 0x7e710000 0x0 0x1000>;
			enable-bit-index = <0>;
		};

		pmucmcb@7e730000 {
			compatible = "apm,xgene-pmu-mcb";
			reg = <0x0 0x7e730000 0x0 0x1000>;
			enable-bit-index = <1>;
		};

		pmucmc@7e810000 {
			compatible = "apm,xgene-pmu-mc";
			reg = <0x0 0x7e810000 0x0 0x1000>;
			enable-bit-index = <0>;
		};

		pmucmc@7e850000 {
			compatible = "apm,xgene-pmu-mc";
			reg = <0x0 0x7e850000 0x0 0x1000>;
			enable-bit-index = <1>;
		};

		pmucmc@7e890000 {
			compatible = "apm,xgene-pmu-mc";
			reg = <0x0 0x7e890000 0x0 0x1000>;
			enable-bit-index = <2>;
		};

		pmucmc@7e8d0000 {
			compatible = "apm,xgene-pmu-mc";
			reg = <0x0 0x7e8d0000 0x0 0x1000>;
			enable-bit-index = <3>;
		};
	};