Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /Documentation/devicetree/bindings/regulator/ltc3589.txt 
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators

Required properties:
- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2"
- reg: I2C slave address

Required child node:
- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out,
  ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
  documented in Documentation/devicetree/bindings/regulator/regulator.txt.

Each regulator is defined using the standard binding for regulators. The
nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify
the resistor values of their external feedback voltage dividers:

Required properties (not on ldo3, ldo4):
- lltc,fb-voltage-divider: An array of two integers containing the resistor
  values R1 and R2 of the feedback voltage divider in ohms.

Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from
0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between
0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1
have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3
regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4
regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V
and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not
be disabled and thus should have the regulator-always-on property set.

Example:

	ltc3589: pmic@34 {
		compatible = "lltc,ltc3589-1";
		reg = <0x34>;

		regulators {
			sw1_reg: sw1 {
				regulator-min-microvolt = <591930>;
				regulator-max-microvolt = <1224671>;
				lltc,fb-voltage-divider = <100000 158000>;
				regulator-ramp-delay = <7000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw2_reg: sw2 {
				regulator-min-microvolt = <704123>;
				regulator-max-microvolt = <1456803>;
				lltc,fb-voltage-divider = <180000 191000>;
				regulator-ramp-delay = <7000>;
				regulator-boot-on;
				regulator-always-on;
			};

			sw3_reg: sw3 {
				regulator-min-microvolt = <1341250>;
				regulator-max-microvolt = <2775000>;
				lltc,fb-voltage-divider = <270000 100000>;
				regulator-ramp-delay = <7000>;
				regulator-boot-on;
				regulator-always-on;
			};

			bb_out_reg: bb-out {
				regulator-min-microvolt = <3387341>;
				regulator-max-microvolt = <3387341>;
				lltc,fb-voltage-divider = <511000 158000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo1_reg: ldo1 {
				regulator-min-microvolt = <1306329>;
				regulator-max-microvolt = <1306329>;
				lltc,fb-voltage-divider = <100000 158000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo2_reg: ldo2 {
				regulator-min-microvolt = <704123>;
				regulator-max-microvolt = <1456806>;
				lltc,fb-voltage-divider = <180000 191000>;
				regulator-ramp-delay = <7000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo3_reg: ldo3 {
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-boot-on;
			};

			ldo4_reg: ldo4 {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <3200000>;
			};
		};
	};