/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/boot/head.S
*
* Copyright (C) 1991, 1992, 1993 Linus Torvalds
*/
/*
* head.S contains the 32-bit startup code.
*
* NOTE!!! Startup happens at absolute address 0x00001000, which is also where
* the page directory will exist. The startup code will be overwritten by
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
* Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
* useful for future device drivers that either access the BIOS via VM86
* mode.
*/
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
.text
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page_types.h>
#include <asm/boot.h>
#include <asm/asm-offsets.h>
#include <asm/bootparam.h>
/*
* The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X
* relocation to get the symbol address in PIC. When the compressed x86
* kernel isn't built as PIC, the linker optimizes R_386_GOT32X
* relocations to their fixed symbol addresses. However, when the
* compressed x86 kernel is loaded at a different address, it leads
* to the following load failure:
*
* Failed to allocate space for phdrs
*
* during the decompression stage.
*
* If the compressed x86 kernel is relocatable at run-time, it should be
* compiled with -fPIE, instead of -fPIC, if possible and should be built as
* Position Independent Executable (PIE) so that linker won't optimize
* R_386_GOT32X relocation to its fixed symbol address. Older
* linkers generate R_386_32 relocations against locally defined symbols,
* _bss, _ebss, _got and _egot, in PIE. It isn't wrong, just less
* optimal than R_386_RELATIVE. But the x86 kernel fails to properly handle
* R_386_32 relocations when relocating the kernel. To generate
* R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
* hidden:
*/
.hidden _bss
.hidden _ebss
.hidden _got
.hidden _egot
__HEAD
ENTRY(startup_32)
cld
/*
* Test KEEP_SEGMENTS flag to see if the bootloader is asking
* us to not reload segments
*/
testb $KEEP_SEGMENTS, BP_loadflags(%esi)
jnz 1f
cli
movl $__BOOT_DS, %eax
movl %eax, %ds
movl %eax, %es
movl %eax, %fs
movl %eax, %gs
movl %eax, %ss
1:
/*
* Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
/*
* %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef [31mCONFIG_RELOCATABLE[0m
movl %ebp, %ebx
movl BP_kernel_alignment(%esi), %eax
decl %eax
addl %eax, %ebx
notl %eax
andl %eax, %ebx
cmpl $LOAD_PHYSICAL_ADDR, %ebx
jge 1f
#endif
movl $LOAD_PHYSICAL_ADDR, %ebx
1:
/* Target address to relocate to for decompression */
movl BP_init_size(%esi), %eax
subl $_end, %eax
addl %eax, %ebx
/* Set up the stack */
leal boot_stack_end(%ebx), %esp
/* Zero EFLAGS */
pushl $0
popfl
/*
* Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
pushl %esi
leal (_bss-4)(%ebp), %esi
leal (_bss-4)(%ebx), %edi
movl $(_bss - startup_32), %ecx
shrl $2, %ecx
std
rep movsl
cld
popl %esi
/*
* Jump to the relocated address.
*/
leal .Lrelocated(%ebx), %eax
jmp *%eax
ENDPROC(startup_32)
#ifdef [31mCONFIG_EFI_STUB[0m
/*
* We don't need the return address, so set up the stack so efi_main() can find
* its arguments.
*/
ENTRY(efi_pe_entry)
add $0x4, %esp
call 1f
1: popl %esi
subl $1b, %esi
popl %ecx
movl %ecx, efi32_config(%esi) /* Handle */
popl %ecx
movl %ecx, efi32_config+8(%esi) /* EFI System table pointer */
/* Relocate efi_config->call() */
leal efi32_config(%esi), %eax
add %esi, 40(%eax)
pushl %eax
call make_boot_params
cmpl $0, %eax
je fail
movl %esi, BP_code32_start(%eax)
popl %ecx
pushl %eax
pushl %ecx
jmp 2f /* Skip efi_config initialization */
ENDPROC(efi_pe_entry)
ENTRY(efi32_stub_entry)
add $0x4, %esp
popl %ecx
popl %edx
call 1f
1: popl %esi
subl $1b, %esi
movl %ecx, efi32_config(%esi) /* Handle */
movl %edx, efi32_config+8(%esi) /* EFI System table pointer */
/* Relocate efi_config->call() */
leal efi32_config(%esi), %eax
add %esi, 40(%eax)
pushl %eax
2:
call efi_main
cmpl $0, %eax
movl %eax, %esi
jne 2f
fail:
/* EFI init failed, so hang. */
hlt
jmp fail
2:
movl BP_code32_start(%esi), %eax
leal startup_32(%eax), %eax
jmp *%eax
ENDPROC(efi32_stub_entry)
#endif
.text
.Lrelocated:
/*
* Clear BSS (stack is currently empty)
*/
xorl %eax, %eax
leal _bss(%ebx), %edi
leal _ebss(%ebx), %ecx
subl %edi, %ecx
shrl $2, %ecx
rep stosl
/*
* Adjust our own GOT
*/
leal _got(%ebx), %edx
leal _egot(%ebx), %ecx
1:
cmpl %ecx, %edx
jae 2f
addl %ebx, (%edx)
addl $4, %edx
jmp 1b
2:
/*
* Do the extraction, and jump to the new kernel..
*/
/* push arguments for extract_kernel: */
pushl $z_output_len /* decompressed length, end of relocs */
movl BP_init_size(%esi), %eax
subl $_end, %eax
movl %ebx, %ebp
subl %eax, %ebp
pushl %ebp /* output address */
pushl $z_input_len /* input_len */
leal input_data(%ebx), %eax
pushl %eax /* input_data */
leal boot_heap(%ebx), %eax
pushl %eax /* heap area */
pushl %esi /* real mode pointer */
call extract_kernel /* returns kernel location in %eax */
addl $24, %esp
/*
* Jump to the extracted kernel.
*/
xorl %ebx, %ebx
jmp *%eax
#ifdef [31mCONFIG_EFI_STUB[0m
.data
efi32_config:
.fill 5,8,0
.long efi_call_phys
.long 0
.byte 0
#endif
/*
* Stack and heap for uncompression
*/
.bss
.balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
.fill BOOT_STACK_SIZE, 1, 0
boot_stack_end: