Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
/*
 * Copyright © 2013 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 *	Shobhit Kumar <shobhit.kumar@intel.com>
 *	Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
 */

#include <linux/kernel.h>

#include "i915_drv.h"
#include "intel_display_types.h"
#include "intel_dsi.h"
#include "intel_sideband.h"

static const u16 lfsr_converts[] = {
	426, 469, 234, 373, 442, 221, 110, 311, 411,		/* 62 - 70 */
	461, 486, 243, 377, 188, 350, 175, 343, 427, 213,	/* 71 - 80 */
	106, 53, 282, 397, 454, 227, 113, 56, 284, 142,		/* 81 - 90 */
	71, 35, 273, 136, 324, 418, 465, 488, 500, 506		/* 91 - 100 */
};

/* Get DSI clock from pixel clock */
static u32 dsi_clk_from_pclk(u32 pclk, enum mipi_dsi_pixel_format fmt,
			     int lane_count)
{
	u32 dsi_clk_khz;
	u32 bpp = mipi_dsi_pixel_format_to_bpp(fmt);

	/* DSI data rate = pixel clock * bits per pixel / lane count
	   pixel clock is converted from KHz to Hz */
	dsi_clk_khz = DIV_ROUND_CLOSEST(pclk * bpp, lane_count);

	return dsi_clk_khz;
}

static int dsi_calc_mnp(struct drm_i915_private *dev_priv,
			struct intel_crtc_state *config,
			int target_dsi_clk)
{
	unsigned int m_min, m_max, p_min = 2, p_max = 6;
	unsigned int m, n, p;
	unsigned int calc_m, calc_p;
	int delta, ref_clk;

	/* target_dsi_clk is expected in kHz */
	if (target_dsi_clk < 300000 || target_dsi_clk > 1150000) {
		DRM_ERROR("DSI CLK Out of Range\n");
		return -ECHRNG;
	}

	if (IS_CHERRYVIEW(dev_priv)) {
		ref_clk = 100000;
		n = 4;
		m_min = 70;
		m_max = 96;
	} else {
		ref_clk = 25000;
		n = 1;
		m_min = 62;
		m_max = 92;
	}

	calc_p = p_min;
	calc_m = m_min;
	delta = abs(target_dsi_clk - (m_min * ref_clk) / (p_min * n));

	for (m = m_min; m <= m_max && delta; m++) {
		for (p = p_min; p <= p_max && delta; p++) {
			/*
			 * Find the optimal m and p divisors with minimal delta
			 * +/- the required clock
			 */
			int calc_dsi_clk = (m * ref_clk) / (p * n);
			int d = abs(target_dsi_clk - calc_dsi_clk);
			if (d < delta) {
				delta = d;
				calc_m = m;
				calc_p = p;
			}
		}
	}

	/* register has log2(N1), this works fine for powers of two */
	config->dsi_pll.ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + calc_p - 2);
	config->dsi_pll.div =
		(ffs(n) - 1) << DSI_PLL_N1_DIV_SHIFT |
		(u32)lfsr_converts[calc_m - 62] << DSI_PLL_M1_DIV_SHIFT;

	return 0;
}

/*
 * XXX: The muxing and gating is hard coded for now. Need to add support for
 * sharing PLLs with two DSI outputs.
 */
int vlv_dsi_pll_compute(struct intel_encoder *encoder,
			struct intel_crtc_state *config)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
	int ret;
	u32 dsi_clk;

	dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
				    intel_dsi->lane_count);

	ret = dsi_calc_mnp(dev_priv, config, dsi_clk);
	if (ret) {
		DRM_DEBUG_KMS("dsi_calc_mnp failed\n");
		return ret;
	}

	if (intel_dsi->ports & (1 << PORT_A))
		config->dsi_pll.ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL;

	if (intel_dsi->ports & (1 << PORT_C))
		config->dsi_pll.ctrl |= DSI_PLL_CLK_GATE_DSI1_DSIPLL;

	config->dsi_pll.ctrl |= DSI_PLL_VCO_EN;

	DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n",
		      config->dsi_pll.div, config->dsi_pll.ctrl);

	return 0;
}

void vlv_dsi_pll_enable(struct intel_encoder *encoder,
			const struct intel_crtc_state *config)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);

	DRM_DEBUG_KMS("\n");

	vlv_cck_get(dev_priv);

	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, 0);
	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_DIVIDER, config->dsi_pll.div);
	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL,
		      config->dsi_pll.ctrl & ~DSI_PLL_VCO_EN);

	/* wait at least 0.5 us after ungating before enabling VCO,
	 * allow hrtimer subsystem optimization by relaxing timing
	 */
	usleep_range(10, 50);

	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, config->dsi_pll.ctrl);

	if (wait_for(vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL) &
						DSI_PLL_LOCK, 20)) {

		vlv_cck_put(dev_priv);
		DRM_ERROR("DSI PLL lock failed\n");
		return;
	}
	vlv_cck_put(dev_priv);

	DRM_DEBUG_KMS("DSI PLL locked\n");
}

void vlv_dsi_pll_disable(struct intel_encoder *encoder)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	u32 tmp;

	DRM_DEBUG_KMS("\n");

	vlv_cck_get(dev_priv);

	tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
	tmp &= ~DSI_PLL_VCO_EN;
	tmp |= DSI_PLL_LDO_GATE;
	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);

	vlv_cck_put(dev_priv);
}

bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv)
{
	bool enabled;
	u32 val;
	u32 mask;

	mask = BXT_DSI_PLL_DO_ENABLE | BXT_DSI_PLL_LOCKED;
	val = I915_READ(BXT_DSI_PLL_ENABLE);
	enabled = (val & mask) == mask;

	if (!enabled)
		return false;

	/*
	 * Dividers must be programmed with valid values. As per BSEPC, for
	 * GEMINLAKE only PORT A divider values are checked while for BXT
	 * both divider values are validated. Check this here for
	 * paranoia, since BIOS is known to misconfigure PLLs in this way at
	 * times, and since accessing DSI registers with invalid dividers
	 * causes a system hang.
	 */
	val = I915_READ(BXT_DSI_PLL_CTL);
	if (IS_GEMINILAKE(dev_priv)) {
		if (!(val & BXT_DSIA_16X_MASK)) {
			DRM_DEBUG_DRIVER("Invalid PLL divider (%08x)\n", val);
			enabled = false;
		}
	} else {
		if (!(val & BXT_DSIA_16X_MASK) || !(val & BXT_DSIC_16X_MASK)) {
			DRM_DEBUG_DRIVER("Invalid PLL divider (%08x)\n", val);
			enabled = false;
		}
	}

	return enabled;
}

void bxt_dsi_pll_disable(struct intel_encoder *encoder)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	u32 val;

	DRM_DEBUG_KMS("\n");

	val = I915_READ(BXT_DSI_PLL_ENABLE);
	val &= ~BXT_DSI_PLL_DO_ENABLE;
	I915_WRITE(BXT_DSI_PLL_ENABLE, val);

	/*
	 * PLL lock should deassert within 200us.
	 * Wait up to 1ms before timing out.
	 */
	if (intel_de_wait_for_clear(dev_priv, BXT_DSI_PLL_ENABLE,
				    BXT_DSI_PLL_LOCKED, 1))
		DRM_ERROR("Timeout waiting for PLL lock deassertion\n");
}

u32 vlv_dsi_get_pclk(struct intel_encoder *encoder,
		     struct intel_crtc_state *config)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
	int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
	u32 dsi_clock, pclk;
	u32 pll_ctl, pll_div;
	u32 m = 0, p = 0, n;
	int refclk = IS_CHERRYVIEW(dev_priv) ? 100000 : 25000;
	int i;

	DRM_DEBUG_KMS("\n");

	vlv_cck_get(dev_priv);
	pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
	pll_div = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_DIVIDER);
	vlv_cck_put(dev_priv);

	config->dsi_pll.ctrl = pll_ctl & ~DSI_PLL_LOCK;
	config->dsi_pll.div = pll_div;

	/* mask out other bits and extract the P1 divisor */
	pll_ctl &= DSI_PLL_P1_POST_DIV_MASK;
	pll_ctl = pll_ctl >> (DSI_PLL_P1_POST_DIV_SHIFT - 2);

	/* N1 divisor */
	n = (pll_div & DSI_PLL_N1_DIV_MASK) >> DSI_PLL_N1_DIV_SHIFT;
	n = 1 << n; /* register has log2(N1) */

	/* mask out the other bits and extract the M1 divisor */
	pll_div &= DSI_PLL_M1_DIV_MASK;
	pll_div = pll_div >> DSI_PLL_M1_DIV_SHIFT;

	while (pll_ctl) {
		pll_ctl = pll_ctl >> 1;
		p++;
	}
	p--;

	if (!p) {
		DRM_ERROR("wrong P1 divisor\n");
		return 0;
	}

	for (i = 0; i < ARRAY_SIZE(lfsr_converts); i++) {
		if (lfsr_converts[i] == pll_div)
			break;
	}

	if (i == ARRAY_SIZE(lfsr_converts)) {
		DRM_ERROR("wrong m_seed programmed\n");
		return 0;
	}

	m = i + 62;

	dsi_clock = (m * refclk) / (p * n);

	pclk = DIV_ROUND_CLOSEST(dsi_clock * intel_dsi->lane_count, bpp);

	return pclk;
}

u32 bxt_dsi_get_pclk(struct intel_encoder *encoder,
		     struct intel_crtc_state *config)
{
	u32 pclk;
	u32 dsi_clk;
	u32 dsi_ratio;
	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	int bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);

	config->dsi_pll.ctrl = I915_READ(BXT_DSI_PLL_CTL);

	dsi_ratio = config->dsi_pll.ctrl & BXT_DSI_PLL_RATIO_MASK;

	dsi_clk = (dsi_ratio * BXT_REF_CLOCK_KHZ) / 2;

	pclk = DIV_ROUND_CLOSEST(dsi_clk * intel_dsi->lane_count, bpp);

	DRM_DEBUG_DRIVER("Calculated pclk=%u\n", pclk);
	return pclk;
}

void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
{
	u32 temp;
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);

	temp = I915_READ(MIPI_CTRL(port));
	temp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
	I915_WRITE(MIPI_CTRL(port), temp |
			intel_dsi->escape_clk_div <<
			ESCAPE_CLOCK_DIVIDER_SHIFT);
}

static void glk_dsi_program_esc_clock(struct drm_device *dev,
				   const struct intel_crtc_state *config)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	u32 dsi_rate = 0;
	u32 pll_ratio = 0;
	u32 ddr_clk = 0;
	u32 div1_value = 0;
	u32 div2_value = 0;
	u32 txesc1_div = 0;
	u32 txesc2_div = 0;

	pll_ratio = config->dsi_pll.ctrl & BXT_DSI_PLL_RATIO_MASK;

	dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2;

	ddr_clk = dsi_rate / 2;

	/* Variable divider value */
	div1_value = DIV_ROUND_CLOSEST(ddr_clk, 20000);

	/* Calculate TXESC1 divider */
	if (div1_value <= 10)
		txesc1_div = div1_value;
	else if ((div1_value > 10) && (div1_value <= 20))
		txesc1_div = DIV_ROUND_UP(div1_value, 2);
	else if ((div1_value > 20) && (div1_value <= 30))
		txesc1_div = DIV_ROUND_UP(div1_value, 4);
	else if ((div1_value > 30) && (div1_value <= 40))
		txesc1_div = DIV_ROUND_UP(div1_value, 6);
	else if ((div1_value > 40) && (div1_value <= 50))
		txesc1_div = DIV_ROUND_UP(div1_value, 8);
	else
		txesc1_div = 10;

	/* Calculate TXESC2 divider */
	div2_value = DIV_ROUND_UP(div1_value, txesc1_div);

	if (div2_value < 10)
		txesc2_div = div2_value;
	else
		txesc2_div = 10;

	I915_WRITE(MIPIO_TXESC_CLK_DIV1, (1 << (txesc1_div - 1)) & GLK_TX_ESC_CLK_DIV1_MASK);
	I915_WRITE(MIPIO_TXESC_CLK_DIV2, (1 << (txesc2_div - 1)) & GLK_TX_ESC_CLK_DIV2_MASK);
}

/* Program BXT Mipi clocks and dividers */
static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port,
				   const struct intel_crtc_state *config)
{
	struct drm_i915_private *dev_priv = to_i915(dev);
	u32 tmp;
	u32 dsi_rate = 0;
	u32 pll_ratio = 0;
	u32 rx_div;
	u32 tx_div;
	u32 rx_div_upper;
	u32 rx_div_lower;
	u32 mipi_8by3_divider;

	/* Clear old configurations */
	tmp = I915_READ(BXT_MIPI_CLOCK_CTL);
	tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
	tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));
	tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));
	tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port));

	/* Get the current DSI rate(actual) */
	pll_ratio = config->dsi_pll.ctrl & BXT_DSI_PLL_RATIO_MASK;
	dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2;

	/*
	 * tx clock should be <= 20MHz and the div value must be
	 * subtracted by 1 as per bspec
	 */
	tx_div = DIV_ROUND_UP(dsi_rate, 20000) - 1;
	/*
	 * rx clock should be <= 150MHz and the div value must be
	 * subtracted by 1 as per bspec
	 */
	rx_div = DIV_ROUND_UP(dsi_rate, 150000) - 1;

	/*
	 * rx divider value needs to be updated in the
	 * two differnt bit fields in the register hence splitting the
	 * rx divider value accordingly
	 */
	rx_div_lower = rx_div & RX_DIVIDER_BIT_1_2;
	rx_div_upper = (rx_div & RX_DIVIDER_BIT_3_4) >> 2;

	mipi_8by3_divider = 0x2;

	tmp |= BXT_MIPI_8X_BY3_DIVIDER(port, mipi_8by3_divider);
	tmp |= BXT_MIPI_TX_ESCLK_DIVIDER(port, tx_div);
	tmp |= BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, rx_div_lower);
	tmp |= BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, rx_div_upper);

	I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
}

int bxt_dsi_pll_compute(struct intel_encoder *encoder,
			struct intel_crtc_state *config)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
	u8 dsi_ratio, dsi_ratio_min, dsi_ratio_max;
	u32 dsi_clk;

	dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format,
				    intel_dsi->lane_count);

	/*
	 * From clock diagram, to get PLL ratio divider, divide double of DSI
	 * link rate (i.e., 2*8x=16x frequency value) by ref clock. Make sure to
	 * round 'up' the result
	 */
	dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ);

	if (IS_BROXTON(dev_priv)) {
		dsi_ratio_min = BXT_DSI_PLL_RATIO_MIN;
		dsi_ratio_max = BXT_DSI_PLL_RATIO_MAX;
	} else {
		dsi_ratio_min = GLK_DSI_PLL_RATIO_MIN;
		dsi_ratio_max = GLK_DSI_PLL_RATIO_MAX;
	}

	if (dsi_ratio < dsi_ratio_min || dsi_ratio > dsi_ratio_max) {
		DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n");
		return -ECHRNG;
	} else
		DRM_DEBUG_KMS("DSI PLL calculation is Done!!\n");

	/*
	 * Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x
	 * Spec says both have to be programmed, even if one is not getting
	 * used. Configure MIPI_CLOCK_CTL dividers in modeset
	 */
	config->dsi_pll.ctrl = dsi_ratio | BXT_DSIA_16X_BY2 | BXT_DSIC_16X_BY2;

	/* As per recommendation from hardware team,
	 * Prog PVD ratio =1 if dsi ratio <= 50
	 */
	if (IS_BROXTON(dev_priv) && dsi_ratio <= 50)
		config->dsi_pll.ctrl |= BXT_DSI_PLL_PVD_RATIO_1;

	return 0;
}

void bxt_dsi_pll_enable(struct intel_encoder *encoder,
			const struct intel_crtc_state *config)
{
	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
	enum port port;
	u32 val;

	DRM_DEBUG_KMS("\n");

	/* Configure PLL vales */
	I915_WRITE(BXT_DSI_PLL_CTL, config->dsi_pll.ctrl);
	POSTING_READ(BXT_DSI_PLL_CTL);

	/* Program TX, RX, Dphy clocks */
	if (IS_BROXTON(dev_priv)) {
		for_each_dsi_port(port, intel_dsi->ports)
			bxt_dsi_program_clocks(encoder->base.dev, port, config);
	} else {
		glk_dsi_program_esc_clock(encoder->base.dev, config);
	}

	/* Enable DSI PLL */
	val = I915_READ(BXT_DSI_PLL_ENABLE);
	val |= BXT_DSI_PLL_DO_ENABLE;
	I915_WRITE(BXT_DSI_PLL_ENABLE, val);

	/* Timeout and fail if PLL not locked */
	if (intel_de_wait_for_set(dev_priv, BXT_DSI_PLL_ENABLE,
				  BXT_DSI_PLL_LOCKED, 1)) {
		DRM_ERROR("Timed out waiting for DSI PLL to lock\n");
		return;
	}

	DRM_DEBUG_KMS("DSI PLL locked\n");
}

void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port)
{
	u32 tmp;
	struct drm_device *dev = encoder->base.dev;
	struct drm_i915_private *dev_priv = to_i915(dev);

	/* Clear old configurations */
	if (IS_BROXTON(dev_priv)) {
		tmp = I915_READ(BXT_MIPI_CLOCK_CTL);
		tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port));
		tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port));
		tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port));
		tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port));
		I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp);
	} else {
		tmp = I915_READ(MIPIO_TXESC_CLK_DIV1);
		tmp &= ~GLK_TX_ESC_CLK_DIV1_MASK;
		I915_WRITE(MIPIO_TXESC_CLK_DIV1, tmp);

		tmp = I915_READ(MIPIO_TXESC_CLK_DIV2);
		tmp &= ~GLK_TX_ESC_CLK_DIV2_MASK;
		I915_WRITE(MIPIO_TXESC_CLK_DIV2, tmp);
	}
	I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP);
}