/*
* SPDX-License-Identifier: GPL-2.0
* Copyright (c) 2018, The Linux Foundation
*/
#include <linux/iopoll.h>
#include "dsi_phy.h"
#include "dsi.xml.h"
static int dsi_phy_hw_v3_0_is_pll_on(struct msm_dsi_phy *phy)
{
void __iomem *base = phy->base;
u32 data = 0;
data = dsi_phy_read(base + REG_DSI_10nm_PHY_CMN_PLL_CNTRL);
mb(); /* make sure read happened */
return (data & BIT(0));
}
static void dsi_phy_hw_v3_0_config_lpcdrx(struct msm_dsi_phy *phy, bool enable)
{
void __iomem *lane_base = phy->lane_base;
int phy_lane_0 = 0; /* TODO: Support all lane swap configs */
/*
* LPRX and CDRX need to enabled only for physical data lane
* corresponding to the logical data lane 0
*/
if (enable)
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_LPRX_CTRL(phy_lane_0), 0x3);
else
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_LPRX_CTRL(phy_lane_0), 0);
}
static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy)
{
int i;
u8 tx_dctrl[] = { 0x00, 0x00, 0x00, 0x04, 0x01 };
void __iomem *lane_base = phy->lane_base;
if (phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK)
tx_dctrl[3] = 0x02;
/* Strength ctrl settings */
for (i = 0; i < 5; i++) {
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_LPTX_STR_CTRL(i),
0x55);
/*
* Disable LPRX and CDRX for all lanes. And later on, it will
* be only enabled for the physical data lane corresponding
* to the logical data lane 0
*/
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_LPRX_CTRL(i), 0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_PIN_SWAP(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_HSTX_STR_CTRL(i),
0x88);
}
dsi_phy_hw_v3_0_config_lpcdrx(phy, true);
/* other settings */
for (i = 0; i < 5; i++) {
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG0(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG1(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG2(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_CFG3(i),
i == 4 ? 0x80 : 0x0);
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_OFFSET_TOP_CTRL(i), 0x0);
dsi_phy_write(lane_base +
REG_DSI_10nm_PHY_LN_OFFSET_BOT_CTRL(i), 0x0);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(i),
tx_dctrl[i]);
}
if (!(phy->cfg->quirks & V3_0_0_10NM_OLD_TIMINGS_QUIRK)) {
/* Toggle BIT 0 to release freeze I/0 */
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x05);
dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04);
}
}
static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
struct msm_dsi_phy_clk_request *clk_req)
{
int ret;
u32 status;
u32 const delay_us = 5;
u32 const timeout_us = 1000;
struct msm_dsi_dphy_timing *timing = &phy->timing;
void __iomem *base = phy->base;
u32 data;
DBG("");
if (msm_dsi_dphy_timing_calc_v3(timing, clk_req)) {
DRM_DEV_ERROR(&phy->pdev->dev,
"%s: D-PHY timing calculation failed\n", __func__);
return -EINVAL;
}
if (dsi_phy_hw_v3_0_is_pll_on(phy))
pr_warn("PLL turned on before configuring PHY\n");
/* wait for REFGEN READY */
ret = readl_poll_timeout_atomic(base + REG_DSI_10nm_PHY_CMN_PHY_STATUS,
status, (status & BIT(0)),
delay_us, timeout_us);
if (ret) {
pr_err("Ref gen not ready. Aborting\n");
return -EINVAL;
}
/* de-assert digital and pll power down */
data = BIT(6) | BIT(5);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, data);
/* Assert PLL core reset */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_PLL_CNTRL, 0x00);
/* turn off resync FIFO */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_RBUF_CTRL, 0x00);
/* Select MS1 byte-clk */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_GLBL_CTRL, 0x10);
/* Enable LDO */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_VREG_CTRL, 0x59);
/* Configure PHY lane swap (TODO: we need to calculate this) */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CFG0, 0x21);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CFG1, 0x84);
/* DSI PHY timings */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_0,
timing->hs_halfbyte_en);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_1,
timing->clk_zero);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_2,
timing->clk_prepare);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_3,
timing->clk_trail);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_4,
timing->hs_exit);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_5,
timing->hs_zero);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_6,
timing->hs_prepare);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_7,
timing->hs_trail);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_8,
timing->hs_rqst);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_9,
timing->ta_go | (timing->ta_sure << 3));
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_10,
timing->ta_get);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_TIMING_CTRL_11,
0x00);
/* Remove power down from all blocks */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, 0x7f);
/* power up lanes */
data = dsi_phy_read(base + REG_DSI_10nm_PHY_CMN_CTRL_0);
/* TODO: only power up lanes that are used */
data |= 0x1F;
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_0, data);
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_LANE_CTRL0, 0x1F);
/* Select full-rate mode */
dsi_phy_write(base + REG_DSI_10nm_PHY_CMN_CTRL_2, 0x40);
ret = msm_dsi_pll_set_usecase(phy->pll, phy->usecase);
if (ret) {
DRM_DEV_ERROR(&phy->pdev->dev, "%s: set pll usecase failed, %d\n",
__func__, ret);
return ret;
}
/* DSI lane settings */
dsi_phy_hw_v3_0_lane_settings(phy);
DBG("DSI%d PHY enabled", phy->id);
return 0;
}
static void dsi_10nm_phy_disable(struct msm_dsi_phy *phy)
{
}
static int dsi_10nm_phy_init(struct msm_dsi_phy *phy)
{
struct platform_device *pdev = phy->pdev;
phy->lane_base = msm_ioremap(pdev, "dsi_phy_lane",
"DSI_PHY_LANE");
if (IS_ERR(phy->lane_base)) {
DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n",
__func__);
return -ENOMEM;
}
return 0;
}
const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs = {
.type = MSM_DSI_PHY_10NM,
.src_pll_truthtable = { {false, false}, {true, false} },
.reg_cfg = {
.num = 1,
.regs = {
{"vdds", 36000, 32},
},
},
.ops = {
.enable = dsi_10nm_phy_enable,
.disable = dsi_10nm_phy_disable,
.init = dsi_10nm_phy_init,
},
.io_start = { 0xae94400, 0xae96400 },
.num_dsi_phy = 2,
};
const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs = {
.type = MSM_DSI_PHY_10NM,
.src_pll_truthtable = { {false, false}, {true, false} },
.reg_cfg = {
.num = 1,
.regs = {
{"vdds", 36000, 32},
},
},
.ops = {
.enable = dsi_10nm_phy_enable,
.disable = dsi_10nm_phy_disable,
.init = dsi_10nm_phy_init,
},
.io_start = { 0xc994400, 0xc996400 },
.num_dsi_phy = 2,
.quirks = V3_0_0_10NM_OLD_TIMINGS_QUIRK,
};