/* SPDX-License-Identifier: GPL-2.0+ */
/* Copyright (c) 2015-2016 Quantenna Communications. All rights reserved. */
#ifndef _QTN_QLINK_H_
#define _QTN_QLINK_H_
#include <linux/ieee80211.h>
#define QLINK_PROTO_VER 15
#define QLINK_MACID_RSVD 0xFF
#define QLINK_VIFID_RSVD 0xFF
/* Common QLINK protocol messages definitions.
*/
/**
* enum qlink_msg_type - QLINK message types
*
* Used to distinguish between message types of QLINK protocol.
*
* @QLINK_MSG_TYPE_CMD: Message is carrying data of a command sent from
* driver to wireless hardware.
* @QLINK_MSG_TYPE_CMDRSP: Message is carrying data of a response to a command.
* Sent from wireless HW to driver in reply to previously issued command.
* @QLINK_MSG_TYPE_EVENT: Data for an event originated in wireless hardware and
* sent asynchronously to driver.
*/
enum qlink_msg_type {
QLINK_MSG_TYPE_CMD = 1,
QLINK_MSG_TYPE_CMDRSP = 2,
QLINK_MSG_TYPE_EVENT = 3
};
/**
* struct qlink_msg_header - common QLINK protocol message header
*
* Portion of QLINK protocol header common for all message types.
*
* @type: Message type, one of &enum qlink_msg_type.
* @len: Total length of message including all headers.
*/
struct qlink_msg_header {
__le16 type;
__le16 len;
} __packed;
/* Generic definitions of data and information carried in QLINK messages
*/
/**
* enum qlink_hw_capab - device capabilities.
*
* @QLINK_HW_CAPAB_REG_UPDATE: device can update it's regulatory region.
* @QLINK_HW_CAPAB_STA_INACT_TIMEOUT: device implements a logic to kick-out
* associated STAs due to inactivity. Inactivity timeout period is taken
* from QLINK_CMD_START_AP parameters.
* @QLINK_HW_CAPAB_DFS_OFFLOAD: device implements DFS offload functionality
* @QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR: device supports MAC Address
* Randomization in probe requests.
* @QLINK_HW_CAPAB_OBSS_SCAN: device can perform OBSS scanning.
*/
enum qlink_hw_capab {
QLINK_HW_CAPAB_REG_UPDATE = BIT(0),
QLINK_HW_CAPAB_STA_INACT_TIMEOUT = BIT(1),
QLINK_HW_CAPAB_DFS_OFFLOAD = BIT(2),
QLINK_HW_CAPAB_SCAN_RANDOM_MAC_ADDR = BIT(3),
QLINK_HW_CAPAB_PWR_MGMT = BIT(4),
QLINK_HW_CAPAB_OBSS_SCAN = BIT(5),
QLINK_HW_CAPAB_SCAN_DWELL = BIT(6),
QLINK_HW_CAPAB_SAE = BIT(8),
};
enum qlink_iface_type {
QLINK_IFTYPE_AP = 1,
QLINK_IFTYPE_STATION = 2,
QLINK_IFTYPE_ADHOC = 3,
QLINK_IFTYPE_MONITOR = 4,
QLINK_IFTYPE_WDS = 5,
QLINK_IFTYPE_AP_VLAN = 6,
};
/**
* struct qlink_intf_info - information on virtual interface.
*
* Data describing a single virtual interface.
*
* @if_type: Mode of interface operation, one of &enum qlink_iface_type
* @vlanid: VLAN ID for AP_VLAN interface type
* @mac_addr: MAC address of virtual interface.
*/
struct qlink_intf_info {
__le16 if_type;
__le16 vlanid;
u8 mac_addr[ETH_ALEN];
u8 use4addr;
u8 rsvd[1];
} __packed;
enum qlink_sta_flags {
QLINK_STA_FLAG_INVALID = 0,
QLINK_STA_FLAG_AUTHORIZED = BIT(0),
QLINK_STA_FLAG_SHORT_PREAMBLE = BIT(1),
QLINK_STA_FLAG_WME = BIT(2),
QLINK_STA_FLAG_MFP = BIT(3),
QLINK_STA_FLAG_AUTHENTICATED = BIT(4),
QLINK_STA_FLAG_TDLS_PEER = BIT(5),
QLINK_STA_FLAG_ASSOCIATED = BIT(6),
};
enum qlink_channel_width {
QLINK_CHAN_WIDTH_5 = 0,
QLINK_CHAN_WIDTH_10,
QLINK_CHAN_WIDTH_20_NOHT,
QLINK_CHAN_WIDTH_20,
QLINK_CHAN_WIDTH_40,
QLINK_CHAN_WIDTH_80,
QLINK_CHAN_WIDTH_80P80,
QLINK_CHAN_WIDTH_160,
};
/**
* struct qlink_channel - qlink control channel definition
*
* @hw_value: hardware-specific value for the channel
* @center_freq: center frequency in MHz
* @flags: channel flags from &enum qlink_channel_flags
* @band: band this channel belongs to
* @max_antenna_gain: maximum antenna gain in dBi
* @max_power: maximum transmission power (in dBm)
* @max_reg_power: maximum regulatory transmission power (in dBm)
* @dfs_state: current state of this channel.
* Only relevant if radar is required on this channel.
* @beacon_found: helper to regulatory code to indicate when a beacon
* has been found on this channel. Use regulatory_hint_found_beacon()
* to enable this, this is useful only on 5 GHz band.
*/
struct qlink_channel {
__le16 hw_value;
__le16 center_freq;
__le32 flags;
u8 band;
u8 max_antenna_gain;
u8 max_power;
u8 max_reg_power;
__le32 dfs_cac_ms;
u8 dfs_state;
u8 beacon_found;
u8 rsvd[2];
} __packed;
/**
* struct qlink_chandef - qlink channel definition
*
* @chan: primary channel definition
* @center_freq1: center frequency of first segment
* @center_freq2: center frequency of second segment (80+80 only)
* @width: channel width, one of @enum qlink_channel_width
*/
struct qlink_chandef {
struct qlink_channel chan;
__le16 center_freq1;
__le16 center_freq2;
u8 width;
u8 rsvd;
} __packed;
#define QLINK_MAX_NR_CIPHER_SUITES 5
#define QLINK_MAX_NR_AKM_SUITES 2
struct qlink_auth_encr {
__le32 wpa_versions;
__le32 cipher_group;
__le32 n_ciphers_pairwise;
__le32 ciphers_pairwise[QLINK_MAX_NR_CIPHER_SUITES];
__le32 n_akm_suites;
__le32 akm_suites[QLINK_MAX_NR_AKM_SUITES];
__le16 control_port_ethertype;
u8 auth_type;
u8 privacy;
u8 control_port;
u8 control_port_no_encrypt;
u8 rsvd[2];
} __packed;
/**
* struct qlink_sta_info_state - station flags mask/value
*
* @mask: STA flags mask, bitmap of &enum qlink_sta_flags
* @value: STA flags values, bitmap of &enum qlink_sta_flags
*/
struct qlink_sta_info_state {
__le32 mask;
__le32 value;
} __packed;
/* QLINK Command messages related definitions
*/
/**
* enum qlink_cmd_type - list of supported commands
*
* Commands are QLINK messages of type @QLINK_MSG_TYPE_CMD, sent by driver to
* wireless network device for processing. Device is expected to send back a
* reply message of type &QLINK_MSG_TYPE_CMDRSP, containing at least command
* execution status (one of &enum qlink_cmd_result). Reply message
* may also contain data payload specific to the command type.
*
* @QLINK_CMD_SEND_FRAME: send specified frame over the air; firmware will
* encapsulate 802.3 packet into 802.11 frame automatically.
* @QLINK_CMD_BAND_INFO_GET: for the specified MAC and specified band, get
* the band's description including number of operational channels and
* info on each channel, HT/VHT capabilities, supported rates etc.
* This command is generic to a specified MAC, interface index must be set
* to QLINK_VIFID_RSVD in command header.
* @QLINK_CMD_REG_NOTIFY: notify device about regulatory domain change. This
* command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE
* capability.
* @QLINK_CMD_START_CAC: start radar detection procedure on a specified channel.
*/
enum qlink_cmd_type {
QLINK_CMD_FW_INIT = 0x0001,
QLINK_CMD_FW_DEINIT = 0x0002,
QLINK_CMD_REGISTER_MGMT = 0x0003,
QLINK_CMD_SEND_FRAME = 0x0004,
QLINK_CMD_MGMT_SET_APPIE = 0x0005,
QLINK_CMD_PHY_PARAMS_GET = 0x0011,
QLINK_CMD_PHY_PARAMS_SET = 0x0012,
QLINK_CMD_GET_HW_INFO = 0x0013,
QLINK_CMD_MAC_INFO = 0x0014,
QLINK_CMD_ADD_INTF = 0x0015,
QLINK_CMD_DEL_INTF = 0x0016,
QLINK_CMD_CHANGE_INTF = 0x0017,
QLINK_CMD_UPDOWN_INTF = 0x0018,
QLINK_CMD_REG_NOTIFY = 0x0019,
QLINK_CMD_BAND_INFO_GET = 0x001A,
QLINK_CMD_CHAN_SWITCH = 0x001B,
QLINK_CMD_CHAN_GET = 0x001C,
QLINK_CMD_START_CAC = 0x001D,
QLINK_CMD_START_AP = 0x0021,
QLINK_CMD_STOP_AP = 0x0022,
QLINK_CMD_SET_MAC_ACL = 0x0023,
QLINK_CMD_GET_STA_INFO = 0x0030,
QLINK_CMD_ADD_KEY = 0x0040,
QLINK_CMD_DEL_KEY = 0x0041,
QLINK_CMD_SET_DEFAULT_KEY = 0x0042,
QLINK_CMD_SET_DEFAULT_MGMT_KEY = 0x0043,
QLINK_CMD_CHANGE_STA = 0x0051,
QLINK_CMD_DEL_STA = 0x0052,
QLINK_CMD_SCAN = 0x0053,
QLINK_CMD_CHAN_STATS = 0x0054,
QLINK_CMD_CONNECT = 0x0060,
QLINK_CMD_DISCONNECT = 0x0061,
QLINK_CMD_PM_SET = 0x0062,
QLINK_CMD_WOWLAN_SET = 0x0063,
QLINK_CMD_EXTERNAL_AUTH = 0x0066,
};
/**
* struct qlink_cmd - QLINK command message header
*
* Header used for QLINK messages of QLINK_MSG_TYPE_CMD type.
*
* @mhdr: Common QLINK message header.
* @cmd_id: command id, one of &enum qlink_cmd_type.
* @seq_num: sequence number of command message, used for matching with
* response message.
* @macid: index of physical radio device the command is destined to or
* QLINK_MACID_RSVD if not applicable.
* @vifid: index of virtual wireless interface on specified @macid the command
* is destined to or QLINK_VIFID_RSVD if not applicable.
*/
struct qlink_cmd {
struct qlink_msg_header mhdr;
__le16 cmd_id;
__le16 seq_num;
u8 rsvd[2];
u8 macid;
u8 vifid;
} __packed;
/**
* struct qlink_cmd_manage_intf - interface management command
*
* Data for interface management commands QLINK_CMD_ADD_INTF, QLINK_CMD_DEL_INTF
* and QLINK_CMD_CHANGE_INTF.
*
* @intf_info: interface description.
*/
struct qlink_cmd_manage_intf {
struct qlink_cmd chdr;
struct qlink_intf_info intf_info;
} __packed;
enum qlink_mgmt_frame_type {
QLINK_MGMT_FRAME_ASSOC_REQ = 0x00,
QLINK_MGMT_FRAME_ASSOC_RESP = 0x01,
QLINK_MGMT_FRAME_REASSOC_REQ = 0x02,
QLINK_MGMT_FRAME_REASSOC_RESP = 0x03,
QLINK_MGMT_FRAME_PROBE_REQ = 0x04,
QLINK_MGMT_FRAME_PROBE_RESP = 0x05,
QLINK_MGMT_FRAME_BEACON = 0x06,
QLINK_MGMT_FRAME_ATIM = 0x07,
QLINK_MGMT_FRAME_DISASSOC = 0x08,
QLINK_MGMT_FRAME_AUTH = 0x09,
QLINK_MGMT_FRAME_DEAUTH = 0x0A,
QLINK_MGMT_FRAME_ACTION = 0x0B,
QLINK_MGMT_FRAME_TYPE_COUNT
};
/**
* struct qlink_cmd_mgmt_frame_register - data for QLINK_CMD_REGISTER_MGMT
*
* @frame_type: MGMT frame type the registration request describes, one of
* &enum qlink_mgmt_frame_type.
* @do_register: 0 - unregister, otherwise register for reception of specified
* MGMT frame type.
*/
struct qlink_cmd_mgmt_frame_register {
struct qlink_cmd chdr;
__le16 frame_type;
u8 do_register;
} __packed;
/**
* @QLINK_FRAME_TX_FLAG_8023: frame has a 802.3 header; if not set, frame
* is a 802.11 encapsulated.
*/
enum qlink_frame_tx_flags {
QLINK_FRAME_TX_FLAG_OFFCHAN = BIT(0),
QLINK_FRAME_TX_FLAG_NO_CCK = BIT(1),
QLINK_FRAME_TX_FLAG_ACK_NOWAIT = BIT(2),
QLINK_FRAME_TX_FLAG_8023 = BIT(3),
};
/**
* struct qlink_cmd_frame_tx - data for QLINK_CMD_SEND_FRAME command
*
* @cookie: opaque request identifier.
* @freq: Frequency to use for frame transmission.
* @flags: Transmission flags, one of &enum qlink_frame_tx_flags.
* @frame_data: frame to transmit.
*/
struct qlink_cmd_frame_tx {
struct qlink_cmd chdr;
__le32 cookie;
__le16 freq;
__le16 flags;
u8 frame_data[0];
} __packed;
/**
* struct qlink_cmd_get_sta_info - data for QLINK_CMD_GET_STA_INFO command
*
* @sta_addr: MAC address of the STA statistics is requested for.
*/
struct qlink_cmd_get_sta_info {
struct qlink_cmd chdr;
u8 sta_addr[ETH_ALEN];
} __packed;
/**
* struct qlink_cmd_add_key - data for QLINK_CMD_ADD_KEY command.
*
* @key_index: index of the key being installed.
* @pairwise: whether to use pairwise key.
* @addr: MAC address of a STA key is being installed to.
* @cipher: cipher suite.
* @vlanid: VLAN ID for AP_VLAN interface type
* @key_data: key data itself.
*/
struct qlink_cmd_add_key {
struct qlink_cmd chdr;
u8 key_index;
u8 pairwise;
u8 addr[ETH_ALEN];
__le32 cipher;
__le16 vlanid;
u8 key_data[0];
} __packed;
/**
* struct qlink_cmd_del_key_req - data for QLINK_CMD_DEL_KEY command
*
* @key_index: index of the key being removed.
* @pairwise: whether to use pairwise key.
* @addr: MAC address of a STA for which a key is removed.
*/
struct qlink_cmd_del_key {
struct qlink_cmd chdr;
u8 key_index;
u8 pairwise;
u8 addr[ETH_ALEN];
} __packed;
/**
* struct qlink_cmd_set_def_key - data for QLINK_CMD_SET_DEFAULT_KEY command
*
* @key_index: index of the key to be set as default one.
* @unicast: key is unicast.
* @multicast: key is multicast.
*/
struct qlink_cmd_set_def_key {
struct qlink_cmd chdr;
u8 key_index;
u8 unicast;
u8 multicast;
} __packed;
/**
* struct qlink_cmd_set_def_mgmt_key - data for QLINK_CMD_SET_DEFAULT_MGMT_KEY
*
* @key_index: index of the key to be set as default MGMT key.
*/
struct qlink_cmd_set_def_mgmt_key {
struct qlink_cmd chdr;
u8 key_index;
} __packed;
/**
* struct qlink_cmd_change_sta - data for QLINK_CMD_CHANGE_STA command
*
* @flag_update: STA flags to update
* @if_type: Mode of interface operation, one of &enum qlink_iface_type
* @vlanid: VLAN ID to assign to specific STA
* @sta_addr: address of the STA for which parameters are set.
*/
struct qlink_cmd_change_sta {
struct qlink_cmd chdr;
struct qlink_sta_info_state flag_update;
__le16 if_type;
__le16 vlanid;
u8 sta_addr[ETH_ALEN];
} __packed;
/**
* struct qlink_cmd_del_sta - data for QLINK_CMD_DEL_STA command.
*
* See &struct station_del_parameters
*/
struct qlink_cmd_del_sta {
struct qlink_cmd chdr;
__le16 reason_code;
u8 subtype;
u8 sta_addr[ETH_ALEN];
} __packed;
enum qlink_sta_connect_flags {
QLINK_STA_CONNECT_DISABLE_HT = BIT(0),
QLINK_STA_CONNECT_DISABLE_VHT = BIT(1),
QLINK_STA_CONNECT_USE_RRM = BIT(2),
};
/**
* struct qlink_cmd_connect - data for QLINK_CMD_CONNECT command
*
* @bssid: BSSID of the BSS to connect to.
* @bssid_hint: recommended AP BSSID for initial connection to the BSS or
* 00:00:00:00:00:00 if not specified.
* @prev_bssid: previous BSSID, if specified (not 00:00:00:00:00:00) indicates
* a request to reassociate.
* @bg_scan_period: period of background scan.
* @flags: one of &enum qlink_sta_connect_flags.
* @ht_capa: HT Capabilities overrides.
* @ht_capa_mask: The bits of ht_capa which are to be used.
* @vht_capa: VHT Capability overrides
* @vht_capa_mask: The bits of vht_capa which are to be used.
* @aen: authentication information.
* @mfp: whether to use management frame protection.
* @payload: variable portion of connection request.
*/
struct qlink_cmd_connect {
struct qlink_cmd chdr;
u8 bssid[ETH_ALEN];
u8 bssid_hint[ETH_ALEN];
u8 prev_bssid[ETH_ALEN];
__le16 bg_scan_period;
__le32 flags;
struct ieee80211_ht_cap ht_capa;
struct ieee80211_ht_cap ht_capa_mask;
struct ieee80211_vht_cap vht_capa;
struct ieee80211_vht_cap vht_capa_mask;
struct qlink_auth_encr aen;
u8 mfp;
u8 pbss;
u8 rsvd[2];
u8 payload[0];
} __packed;
/**
* struct qlink_cmd_external_auth - data for QLINK_CMD_EXTERNAL_AUTH command
*
* @bssid: BSSID of the BSS to connect to
* @status: authentication status code
* @payload: variable portion of connection request.
*/
struct qlink_cmd_external_auth {
struct qlink_cmd chdr;
u8 bssid[ETH_ALEN];
__le16 status;
u8 payload[0];
} __packed;
/**
* struct qlink_cmd_disconnect - data for QLINK_CMD_DISCONNECT command
*
* @reason: code of the reason of disconnect, see &enum ieee80211_reasoncode.
*/
struct qlink_cmd_disconnect {
struct qlink_cmd chdr;
__le16 reason;
} __packed;
/**
* struct qlink_cmd_updown - data for QLINK_CMD_UPDOWN_INTF command
*
* @if_up: bring specified interface DOWN (if_up==0) or UP (otherwise).
* Interface is specified in common command header @chdr.
*/
struct qlink_cmd_updown {
struct qlink_cmd chdr;
u8 if_up;
} __packed;
/**
* enum qlink_band - a list of frequency bands
*
* @QLINK_BAND_2GHZ: 2.4GHz band
* @QLINK_BAND_5GHZ: 5GHz band
* @QLINK_BAND_60GHZ: 60GHz band
*/
enum qlink_band {
QLINK_BAND_2GHZ = BIT(0),
QLINK_BAND_5GHZ = BIT(1),
QLINK_BAND_60GHZ = BIT(2),
};
/**
* struct qlink_cmd_band_info_get - data for QLINK_CMD_BAND_INFO_GET command
*
* @band: a PHY band for which information is queried, one of @enum qlink_band
*/
struct qlink_cmd_band_info_get {
struct qlink_cmd chdr;
u8 band;
} __packed;
/**
* struct qlink_cmd_get_chan_stats - data for QLINK_CMD_CHAN_STATS command
*
* @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
*/
struct qlink_cmd_get_chan_stats {
struct qlink_cmd chdr;
__le16 channel;
} __packed;
/**
* enum qlink_reg_initiator - Indicates the initiator of a reg domain request
*
* See &enum nl80211_reg_initiator for more info.
*/
enum qlink_reg_initiator {
QLINK_REGDOM_SET_BY_CORE,
QLINK_REGDOM_SET_BY_USER,
QLINK_REGDOM_SET_BY_DRIVER,
QLINK_REGDOM_SET_BY_COUNTRY_IE,
};
/**
* enum qlink_user_reg_hint_type - type of user regulatory hint
*
* See &enum nl80211_user_reg_hint_type for more info.
*/
enum qlink_user_reg_hint_type {
QLINK_USER_REG_HINT_USER = 0,
QLINK_USER_REG_HINT_CELL_BASE = 1,
QLINK_USER_REG_HINT_INDOOR = 2,
};
/**
* struct qlink_cmd_reg_notify - data for QLINK_CMD_REG_NOTIFY command
*
* @alpha2: the ISO / IEC 3166 alpha2 country code.
* @initiator: which entity sent the request, one of &enum qlink_reg_initiator.
* @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one
* of &enum qlink_user_reg_hint_type.
* @num_channels: number of &struct qlink_tlv_channel in a variable portion of a
* payload.
* @slave_radar: whether slave device should enable radar detection.
* @dfs_region: one of &enum qlink_dfs_regions.
* @info: variable portion of regulatory notifier callback.
*/
struct qlink_cmd_reg_notify {
struct qlink_cmd chdr;
u8 alpha2[2];
u8 initiator;
u8 user_reg_hint_type;
u8 num_channels;
u8 dfs_region;
u8 slave_radar;
u8 rsvd[1];
u8 info[0];
} __packed;
/**
* struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command
*
* @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
* @radar_required: whether radar detection is required on the new channel
* @block_tx: whether transmissions should be blocked while changing
* @beacon_count: number of beacons until switch
*/
struct qlink_cmd_chan_switch {
struct qlink_cmd chdr;
__le16 channel;
u8 radar_required;
u8 block_tx;
u8 beacon_count;
} __packed;
/**
* enum qlink_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID
*
* Refer to &enum nl80211_hidden_ssid
*/
enum qlink_hidden_ssid {
QLINK_HIDDEN_SSID_NOT_IN_USE,
QLINK_HIDDEN_SSID_ZERO_LEN,
QLINK_HIDDEN_SSID_ZERO_CONTENTS
};
/**
* struct qlink_cmd_start_ap - data for QLINK_CMD_START_AP command
*
* @beacon_interval: beacon interval
* @inactivity_timeout: station's inactivity period in seconds
* @dtim_period: DTIM period
* @hidden_ssid: whether to hide the SSID, one of &enum qlink_hidden_ssid
* @smps_mode: SMPS mode
* @ht_required: stations must support HT
* @vht_required: stations must support VHT
* @aen: encryption info
* @info: variable configurations
*/
struct qlink_cmd_start_ap {
struct qlink_cmd chdr;
__le16 beacon_interval;
__le16 inactivity_timeout;
u8 dtim_period;
u8 hidden_ssid;
u8 smps_mode;
u8 p2p_ctwindow;
u8 p2p_opp_ps;
u8 pbss;
u8 ht_required;
u8 vht_required;
struct qlink_auth_encr aen;
u8 info[0];
} __packed;
/**
* struct qlink_cmd_start_cac - data for QLINK_CMD_START_CAC command
*
* @chan: a channel to start a radar detection procedure on.
* @cac_time_ms: CAC time.
*/
struct qlink_cmd_start_cac {
struct qlink_cmd chdr;
struct qlink_chandef chan;
__le32 cac_time_ms;
} __packed;
enum qlink_acl_policy {
QLINK_ACL_POLICY_ACCEPT_UNLESS_LISTED,
QLINK_ACL_POLICY_DENY_UNLESS_LISTED,
};
struct qlink_mac_address {
u8 addr[ETH_ALEN];
} __packed;
/**
* struct qlink_acl_data - ACL data
*
* @policy: filter policy, one of &enum qlink_acl_policy.
* @num_entries: number of MAC addresses in array.
* @mac_address: MAC addresses array.
*/
struct qlink_acl_data {
__le32 policy;
__le32 num_entries;
struct qlink_mac_address mac_addrs[0];
} __packed;
/**
* enum qlink_pm_mode - Power Management mode
*
* @QLINK_PM_OFF: normal mode, no power saving enabled
* @QLINK_PM_AUTO_STANDBY: enable auto power save mode
*/
enum qlink_pm_mode {
QLINK_PM_OFF = 0,
QLINK_PM_AUTO_STANDBY = 1,
};
/**
* struct qlink_cmd_pm_set - data for QLINK_CMD_PM_SET command
*
* @pm_standby timer: period of network inactivity in seconds before
* putting a radio in power save mode
* @pm_mode: power management mode
*/
struct qlink_cmd_pm_set {
struct qlink_cmd chdr;
__le32 pm_standby_timer;
u8 pm_mode;
} __packed;
/**
* enum qlink_wowlan_trigger
*
* @QLINK_WOWLAN_TRIG_DISCONNECT: wakeup on disconnect
* @QLINK_WOWLAN_TRIG_MAGIC_PKT: wakeup on magic packet
* @QLINK_WOWLAN_TRIG_PATTERN_PKT: wakeup on user-defined packet
*/
enum qlink_wowlan_trigger {
QLINK_WOWLAN_TRIG_DISCONNECT = BIT(0),
QLINK_WOWLAN_TRIG_MAGIC_PKT = BIT(1),
QLINK_WOWLAN_TRIG_PATTERN_PKT = BIT(2),
};
/**
* struct qlink_cmd_wowlan_set - data for QLINK_CMD_WOWLAN_SET command
*
* @triggers: requested bitmask of WoWLAN triggers
*/
struct qlink_cmd_wowlan_set {
struct qlink_cmd chdr;
__le32 triggers;
u8 data[0];
} __packed;
/* QLINK Command Responses messages related definitions
*/
enum qlink_cmd_result {
QLINK_CMD_RESULT_OK = 0,
QLINK_CMD_RESULT_INVALID,
QLINK_CMD_RESULT_ENOTSUPP,
QLINK_CMD_RESULT_ENOTFOUND,
QLINK_CMD_RESULT_EALREADY,
QLINK_CMD_RESULT_EADDRINUSE,
QLINK_CMD_RESULT_EADDRNOTAVAIL,
QLINK_CMD_RESULT_EBUSY,
};
/**
* struct qlink_resp - QLINK command response message header
*
* Header used for QLINK messages of QLINK_MSG_TYPE_CMDRSP type.
*
* @mhdr: see &struct qlink_msg_header.
* @cmd_id: command ID the response corresponds to, one of &enum qlink_cmd_type.
* @seq_num: sequence number of command message, used for matching with
* response message.
* @result: result of the command execution, one of &enum qlink_cmd_result.
* @macid: index of physical radio device the response is sent from or
* QLINK_MACID_RSVD if not applicable.
* @vifid: index of virtual wireless interface on specified @macid the response
* is sent from or QLINK_VIFID_RSVD if not applicable.
*/
struct qlink_resp {
struct qlink_msg_header mhdr;
__le16 cmd_id;
__le16 seq_num;
__le16 result;
u8 macid;
u8 vifid;
} __packed;
/**
* enum qlink_dfs_regions - regulatory DFS regions
*
* Corresponds to &enum nl80211_dfs_regions.
*/
enum qlink_dfs_regions {
QLINK_DFS_UNSET = 0,
QLINK_DFS_FCC = 1,
QLINK_DFS_ETSI = 2,
QLINK_DFS_JP = 3,
};
/**
* struct qlink_resp_get_mac_info - response for QLINK_CMD_MAC_INFO command
*
* Data describing specific physical device providing wireless MAC
* functionality.
*
* @dev_mac: MAC address of physical WMAC device (used for first BSS on
* specified WMAC).
* @num_tx_chain: Number of transmit chains used by WMAC.
* @num_rx_chain: Number of receive chains used by WMAC.
* @vht_cap_mod_mask: mask specifying which VHT capabilities can be altered.
* @ht_cap_mod_mask: mask specifying which HT capabilities can be altered.
* @bands_cap: wireless bands WMAC can operate in, bitmap of &enum qlink_band.
* @max_ap_assoc_sta: Maximum number of associations supported by WMAC.
* @radar_detect_widths: bitmask of channels BW for which WMAC can detect radar.
* @alpha2: country code ID firmware is configured to.
* @n_reg_rules: number of regulatory rules TLVs in variable portion of the
* message.
* @dfs_region: regulatory DFS region, one of &enum qlink_dfs_regions.
* @var_info: variable-length WMAC info data.
*/
struct qlink_resp_get_mac_info {
struct qlink_resp rhdr;
u8 dev_mac[ETH_ALEN];
u8 num_tx_chain;
u8 num_rx_chain;
struct ieee80211_vht_cap vht_cap_mod_mask;
struct ieee80211_ht_cap ht_cap_mod_mask;
__le16 max_ap_assoc_sta;
__le16 radar_detect_widths;
__le32 max_acl_mac_addrs;
u8 bands_cap;
u8 alpha2[2];
u8 n_reg_rules;
u8 dfs_region;
u8 rsvd[1];
u8 var_info[0];
} __packed;
/**
* struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command
*
* Description of wireless hardware capabilities and features.
*
* @fw_ver: wireless hardware firmware version.
* @hw_capab: Bitmap of capabilities supported by firmware.
* @ql_proto_ver: Version of QLINK protocol used by firmware.
* @num_mac: Number of separate physical radio devices provided by hardware.
* @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware.
* @total_tx_chains: total number of transmit chains used by device.
* @total_rx_chains: total number of receive chains.
* @info: variable-length HW info.
*/
struct qlink_resp_get_hw_info {
struct qlink_resp rhdr;
__le32 fw_ver;
__le32 hw_capab;
__le32 bld_tmstamp;
__le32 plat_id;
__le32 hw_ver;
__le16 ql_proto_ver;
u8 num_mac;
u8 mac_bitmap;
u8 total_tx_chain;
u8 total_rx_chain;
u8 info[0];
} __packed;
/**
* struct qlink_resp_manage_intf - response for interface management commands
*
* Response data for QLINK_CMD_ADD_INTF and QLINK_CMD_CHANGE_INTF commands.
*
* @rhdr: Common Command Response message header.
* @intf_info: interface description.
*/
struct qlink_resp_manage_intf {
struct qlink_resp rhdr;
struct qlink_intf_info intf_info;
} __packed;
enum qlink_sta_info_rate_flags {
QLINK_STA_INFO_RATE_FLAG_HT_MCS = BIT(0),
QLINK_STA_INFO_RATE_FLAG_VHT_MCS = BIT(1),
QLINK_STA_INFO_RATE_FLAG_SHORT_GI = BIT(2),
QLINK_STA_INFO_RATE_FLAG_60G = BIT(3),
};
/**
* struct qlink_resp_get_sta_info - response for QLINK_CMD_GET_STA_INFO command
*
* Response data containing statistics for specified STA.
*
* @filled: a bitmask of &enum qlink_sta_info, specifies which info in response
* is valid.
* @sta_addr: MAC address of STA the response carries statistic for.
* @info: variable statistics for specified STA.
*/
struct qlink_resp_get_sta_info {
struct qlink_resp rhdr;
u8 sta_addr[ETH_ALEN];
u8 rsvd[2];
u8 info[0];
} __packed;
/**
* struct qlink_resp_band_info_get - response for QLINK_CMD_BAND_INFO_GET cmd
*
* @band: frequency band that the response describes, one of @enum qlink_band.
* @num_chans: total number of channels info TLVs contained in reply.
* @num_bitrates: total number of bitrate TLVs contained in reply.
* @info: variable-length info portion.
*/
struct qlink_resp_band_info_get {
struct qlink_resp rhdr;
u8 band;
u8 num_chans;
u8 num_bitrates;
u8 rsvd[1];
u8 info[0];
} __packed;
/**
* struct qlink_resp_phy_params - response for QLINK_CMD_PHY_PARAMS_GET command
*
* @info: variable-length array of PHY params.
*/
struct qlink_resp_phy_params {
struct qlink_resp rhdr;
u8 info[0];
} __packed;
/**
* struct qlink_resp_get_chan_stats - response for QLINK_CMD_CHAN_STATS cmd
*
* @info: variable-length channel info.
*/
struct qlink_resp_get_chan_stats {
struct qlink_cmd rhdr;
u8 info[0];
} __packed;
/**
* struct qlink_resp_channel_get - response for QLINK_CMD_CHAN_GET command
*
* @chan: definition of current operating channel.
*/
struct qlink_resp_channel_get {
struct qlink_resp rhdr;
struct qlink_chandef chan;
} __packed;
/* QLINK Events messages related definitions
*/
enum qlink_event_type {
QLINK_EVENT_STA_ASSOCIATED = 0x0021,
QLINK_EVENT_STA_DEAUTH = 0x0022,
QLINK_EVENT_MGMT_RECEIVED = 0x0023,
QLINK_EVENT_SCAN_RESULTS = 0x0024,
QLINK_EVENT_SCAN_COMPLETE = 0x0025,
QLINK_EVENT_BSS_JOIN = 0x0026,
QLINK_EVENT_BSS_LEAVE = 0x0027,
QLINK_EVENT_FREQ_CHANGE = 0x0028,
QLINK_EVENT_RADAR = 0x0029,
QLINK_EVENT_EXTERNAL_AUTH = 0x0030,
};
/**
* struct qlink_event - QLINK event message header
*
* Header used for QLINK messages of QLINK_MSG_TYPE_EVENT type.
*
* @mhdr: Common QLINK message header.
* @event_id: Specifies specific event ID, one of &enum qlink_event_type.
* @macid: index of physical radio device the event was generated on or
* QLINK_MACID_RSVD if not applicable.
* @vifid: index of virtual wireless interface on specified @macid the event
* was generated on or QLINK_VIFID_RSVD if not applicable.
*/
struct qlink_event {
struct qlink_msg_header mhdr;
__le16 event_id;
u8 macid;
u8 vifid;
} __packed;
/**
* struct qlink_event_sta_assoc - data for QLINK_EVENT_STA_ASSOCIATED event
*
* @sta_addr: Address of a STA for which new association event was generated
* @frame_control: control bits from 802.11 ASSOC_REQUEST header.
* @payload: IEs from association request.
*/
struct qlink_event_sta_assoc {
struct qlink_event ehdr;
u8 sta_addr[ETH_ALEN];
__le16 frame_control;
u8 ies[0];
} __packed;
/**
* struct qlink_event_sta_deauth - data for QLINK_EVENT_STA_DEAUTH event
*
* @sta_addr: Address of a deauthenticated STA.
* @reason: reason for deauthentication.
*/
struct qlink_event_sta_deauth {
struct qlink_event ehdr;
u8 sta_addr[ETH_ALEN];
__le16 reason;
} __packed;
/**
* struct qlink_event_bss_join - data for QLINK_EVENT_BSS_JOIN event
*
* @chan: new operating channel definition
* @bssid: BSSID of a BSS which interface tried to joined.
* @status: status of joining attempt, see &enum ieee80211_statuscode.
*/
struct qlink_event_bss_join {
struct qlink_event ehdr;
struct qlink_chandef chan;
u8 bssid[ETH_ALEN];
__le16 status;
u8 ies[0];
} __packed;
/**
* struct qlink_event_bss_leave - data for QLINK_EVENT_BSS_LEAVE event
*
* @reason: reason of disconnecting from BSS.
*/
struct qlink_event_bss_leave {
struct qlink_event ehdr;
__le16 reason;
} __packed;
/**
* struct qlink_event_freq_change - data for QLINK_EVENT_FREQ_CHANGE event
*
* @chan: new operating channel definition
*/
struct qlink_event_freq_change {
struct qlink_event ehdr;
struct qlink_chandef chan;
} __packed;
enum qlink_rxmgmt_flags {
QLINK_RXMGMT_FLAG_ANSWERED = 1 << 0,
};
/**
* struct qlink_event_rxmgmt - data for QLINK_EVENT_MGMT_RECEIVED event
*
* @freq: Frequency on which the frame was received in MHz.
* @flags: bitmap of &enum qlink_rxmgmt_flags.
* @sig_dbm: signal strength in dBm.
* @frame_data: data of Rx'd frame itself.
*/
struct qlink_event_rxmgmt {
struct qlink_event ehdr;
__le32 freq;
__le32 flags;
s8 sig_dbm;
u8 rsvd[3];
u8 frame_data[0];
} __packed;
/**
* struct qlink_event_scan_result - data for QLINK_EVENT_SCAN_RESULTS event
*
* @tsf: TSF timestamp indicating when scan results were generated.
* @freq: Center frequency of the channel where BSS for which the scan result
* event was generated was discovered.
* @capab: capabilities field.
* @bintval: beacon interval announced by discovered BSS.
* @sig_dbm: signal strength in dBm.
* @bssid: BSSID announced by discovered BSS.
* @ssid_len: length of SSID announced by BSS.
* @ssid: SSID announced by discovered BSS.
* @payload: IEs that are announced by discovered BSS in its MGMt frames.
*/
struct qlink_event_scan_result {
struct qlink_event ehdr;
__le64 tsf;
__le16 freq;
__le16 capab;
__le16 bintval;
s8 sig_dbm;
u8 ssid_len;
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 bssid[ETH_ALEN];
u8 rsvd[2];
u8 payload[0];
} __packed;
/**
* enum qlink_scan_complete_flags - indicates result of scan request.
*
* @QLINK_SCAN_NONE: Scan request was processed.
* @QLINK_SCAN_ABORTED: Scan was aborted.
*/
enum qlink_scan_complete_flags {
QLINK_SCAN_NONE = 0,
QLINK_SCAN_ABORTED = BIT(0),
};
/**
* struct qlink_event_scan_complete - data for QLINK_EVENT_SCAN_COMPLETE event
*
* @flags: flags indicating the status of pending scan request,
* see &enum qlink_scan_complete_flags.
*/
struct qlink_event_scan_complete {
struct qlink_event ehdr;
__le32 flags;
} __packed;
enum qlink_radar_event {
QLINK_RADAR_DETECTED,
QLINK_RADAR_CAC_FINISHED,
QLINK_RADAR_CAC_ABORTED,
QLINK_RADAR_NOP_FINISHED,
QLINK_RADAR_PRE_CAC_EXPIRED,
QLINK_RADAR_CAC_STARTED,
};
/**
* struct qlink_event_radar - data for QLINK_EVENT_RADAR event
*
* @chan: channel on which radar event happened.
* @event: radar event type, one of &enum qlink_radar_event.
*/
struct qlink_event_radar {
struct qlink_event ehdr;
struct qlink_chandef chan;
u8 event;
u8 rsvd[3];
} __packed;
/**
* struct qlink_event_external_auth - data for QLINK_EVENT_EXTERNAL_AUTH event
*
* @ssid: SSID announced by BSS
* @ssid_len: SSID length
* @bssid: BSSID of the BSS to connect to
* @akm_suite: AKM suite for external authentication
* @action: action type/trigger for external authentication
*/
struct qlink_event_external_auth {
struct qlink_event ehdr;
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len;
u8 bssid[ETH_ALEN];
__le32 akm_suite;
u8 action;
} __packed;
/* QLINK TLVs (Type-Length Values) definitions
*/
/**
* enum qlink_tlv_id - list of TLVs that Qlink messages can carry
*
* @QTN_TLV_ID_STA_STATS_MAP: a bitmap of &enum qlink_sta_info, used to
* indicate which statistic carried in QTN_TLV_ID_STA_STATS is valid.
* @QTN_TLV_ID_STA_STATS: per-STA statistics as defined by
* &struct qlink_sta_stats. Valid values are marked as such in a bitmap
* carried by QTN_TLV_ID_STA_STATS_MAP.
* @QTN_TLV_ID_MAX_SCAN_SSIDS: maximum number of SSIDs the device can scan
* for in any given scan.
* @QTN_TLV_ID_SCAN_DWELL_ACTIVE: time spent on a single channel for an active
* scan.
* @QTN_TLV_ID_SCAN_DWELL_PASSIVE: time spent on a single channel for a passive
* scan.
* @QTN_TLV_ID_SCAN_SAMPLE_DURATION: total duration of sampling a single channel
* during a scan including off-channel dwell time and operating channel
* time.
*/
enum qlink_tlv_id {
QTN_TLV_ID_FRAG_THRESH = 0x0201,
QTN_TLV_ID_RTS_THRESH = 0x0202,
QTN_TLV_ID_SRETRY_LIMIT = 0x0203,
QTN_TLV_ID_LRETRY_LIMIT = 0x0204,
QTN_TLV_ID_REG_RULE = 0x0207,
QTN_TLV_ID_CHANNEL = 0x020F,
QTN_TLV_ID_CHANDEF = 0x0210,
QTN_TLV_ID_STA_STATS_MAP = 0x0211,
QTN_TLV_ID_STA_STATS = 0x0212,
QTN_TLV_ID_COVERAGE_CLASS = 0x0213,
QTN_TLV_ID_IFACE_LIMIT = 0x0214,
QTN_TLV_ID_NUM_IFACE_COMB = 0x0215,
QTN_TLV_ID_CHANNEL_STATS = 0x0216,
QTN_TLV_ID_KEY = 0x0302,
QTN_TLV_ID_SEQ = 0x0303,
QTN_TLV_ID_IE_SET = 0x0305,
QTN_TLV_ID_EXT_CAPABILITY_MASK = 0x0306,
QTN_TLV_ID_ACL_DATA = 0x0307,
QTN_TLV_ID_BUILD_NAME = 0x0401,
QTN_TLV_ID_BUILD_REV = 0x0402,
QTN_TLV_ID_BUILD_TYPE = 0x0403,
QTN_TLV_ID_BUILD_LABEL = 0x0404,
QTN_TLV_ID_HW_ID = 0x0405,
QTN_TLV_ID_CALIBRATION_VER = 0x0406,
QTN_TLV_ID_UBOOT_VER = 0x0407,
QTN_TLV_ID_RANDOM_MAC_ADDR = 0x0408,
QTN_TLV_ID_MAX_SCAN_SSIDS = 0x0409,
QTN_TLV_ID_WOWLAN_CAPAB = 0x0410,
QTN_TLV_ID_WOWLAN_PATTERN = 0x0411,
QTN_TLV_ID_SCAN_FLUSH = 0x0412,
QTN_TLV_ID_SCAN_DWELL_ACTIVE = 0x0413,
QTN_TLV_ID_SCAN_DWELL_PASSIVE = 0x0416,
QTN_TLV_ID_SCAN_SAMPLE_DURATION = 0x0417,
};
struct qlink_tlv_hdr {
__le16 type;
__le16 len;
u8 val[0];
} __packed;
struct qlink_iface_comb_num {
__le32 iface_comb_num;
} __packed;
struct qlink_iface_limit {
__le16 max_num;
__le16 type;
} __packed;
struct qlink_iface_limit_record {
__le16 max_interfaces;
u8 num_different_channels;
u8 n_limits;
struct qlink_iface_limit limits[0];
} __packed;
#define QLINK_RSSI_OFFSET 120
struct qlink_tlv_frag_rts_thr {
struct qlink_tlv_hdr hdr;
__le32 thr;
} __packed;
struct qlink_tlv_rlimit {
struct qlink_tlv_hdr hdr;
u8 rlimit;
} __packed;
struct qlink_tlv_cclass {
struct qlink_tlv_hdr hdr;
u8 cclass;
} __packed;
/**
* enum qlink_reg_rule_flags - regulatory rule flags
*
* See description of &enum nl80211_reg_rule_flags
*/
enum qlink_reg_rule_flags {
QLINK_RRF_NO_OFDM = BIT(0),
QLINK_RRF_NO_CCK = BIT(1),
QLINK_RRF_NO_INDOOR = BIT(2),
QLINK_RRF_NO_OUTDOOR = BIT(3),
QLINK_RRF_DFS = BIT(4),
QLINK_RRF_PTP_ONLY = BIT(5),
QLINK_RRF_PTMP_ONLY = BIT(6),
QLINK_RRF_NO_IR = BIT(7),
QLINK_RRF_AUTO_BW = BIT(8),
QLINK_RRF_IR_CONCURRENT = BIT(9),
QLINK_RRF_NO_HT40MINUS = BIT(10),
QLINK_RRF_NO_HT40PLUS = BIT(11),
QLINK_RRF_NO_80MHZ = BIT(12),
QLINK_RRF_NO_160MHZ = BIT(13),
};
/**
* struct qlink_tlv_reg_rule - data for QTN_TLV_ID_REG_RULE TLV
*
* Regulatory rule description.
*
* @start_freq_khz: start frequency of the range the rule is attributed to.
* @end_freq_khz: end frequency of the range the rule is attributed to.
* @max_bandwidth_khz: max bandwidth that channels in specified range can be
* configured to.
* @max_antenna_gain: max antenna gain that can be used in the specified
* frequency range, dBi.
* @max_eirp: maximum EIRP.
* @flags: regulatory rule flags in &enum qlink_reg_rule_flags.
* @dfs_cac_ms: DFS CAC period.
*/
struct qlink_tlv_reg_rule {
struct qlink_tlv_hdr hdr;
__le32 start_freq_khz;
__le32 end_freq_khz;
__le32 max_bandwidth_khz;
__le32 max_antenna_gain;
__le32 max_eirp;
__le32 flags;
__le32 dfs_cac_ms;
} __packed;
enum qlink_channel_flags {
QLINK_CHAN_DISABLED = BIT(0),
QLINK_CHAN_NO_IR = BIT(1),
QLINK_CHAN_RADAR = BIT(3),
QLINK_CHAN_NO_HT40PLUS = BIT(4),
QLINK_CHAN_NO_HT40MINUS = BIT(5),
QLINK_CHAN_NO_OFDM = BIT(6),
QLINK_CHAN_NO_80MHZ = BIT(7),
QLINK_CHAN_NO_160MHZ = BIT(8),
QLINK_CHAN_INDOOR_ONLY = BIT(9),
QLINK_CHAN_IR_CONCURRENT = BIT(10),
QLINK_CHAN_NO_20MHZ = BIT(11),
QLINK_CHAN_NO_10MHZ = BIT(12),
};
enum qlink_dfs_state {
QLINK_DFS_USABLE,
QLINK_DFS_UNAVAILABLE,
QLINK_DFS_AVAILABLE,
};
/**
* struct qlink_tlv_channel - data for QTN_TLV_ID_CHANNEL TLV
*
* Channel settings.
*
* @channel: ieee80211 channel settings.
*/
struct qlink_tlv_channel {
struct qlink_tlv_hdr hdr;
struct qlink_channel chan;
} __packed;
/**
* struct qlink_tlv_chandef - data for QTN_TLV_ID_CHANDEF TLV
*
* Channel definition.
*
* @chan: channel definition data.
*/
struct qlink_tlv_chandef {
struct qlink_tlv_hdr hdr;
struct qlink_chandef chdef;
} __packed;
enum qlink_ie_set_type {
QLINK_IE_SET_UNKNOWN,
QLINK_IE_SET_ASSOC_REQ,
QLINK_IE_SET_ASSOC_RESP,
QLINK_IE_SET_PROBE_REQ,
QLINK_IE_SET_SCAN,
QLINK_IE_SET_BEACON_HEAD,
QLINK_IE_SET_BEACON_TAIL,
QLINK_IE_SET_BEACON_IES,
QLINK_IE_SET_PROBE_RESP,
QLINK_IE_SET_PROBE_RESP_IES,
};
/**
* struct qlink_tlv_ie_set - data for QTN_TLV_ID_IE_SET
*
* @type: type of MGMT frame IEs belong to, one of &enum qlink_ie_set_type.
* @flags: for future use.
* @ie_data: IEs data.
*/
struct qlink_tlv_ie_set {
struct qlink_tlv_hdr hdr;
u8 type;
u8 flags;
u8 ie_data[0];
} __packed;
struct qlink_chan_stats {
__le32 chan_num;
__le32 cca_tx;
__le32 cca_rx;
__le32 cca_busy;
__le32 cca_try;
s8 chan_noise;
} __packed;
/**
* enum qlink_sta_info - station information bitmap
*
* Used to indicate which statistics values in &struct qlink_sta_stats
* are valid. Individual values are used to fill a bitmap carried in a
* payload of QTN_TLV_ID_STA_STATS_MAP.
*
* @QLINK_STA_INFO_CONNECTED_TIME: connected_time value is valid.
* @QLINK_STA_INFO_INACTIVE_TIME: inactive_time value is valid.
* @QLINK_STA_INFO_RX_BYTES: lower 32 bits of rx_bytes value are valid.
* @QLINK_STA_INFO_TX_BYTES: lower 32 bits of tx_bytes value are valid.
* @QLINK_STA_INFO_RX_BYTES64: rx_bytes value is valid.
* @QLINK_STA_INFO_TX_BYTES64: tx_bytes value is valid.
* @QLINK_STA_INFO_RX_DROP_MISC: rx_dropped_misc value is valid.
* @QLINK_STA_INFO_BEACON_RX: rx_beacon value is valid.
* @QLINK_STA_INFO_SIGNAL: signal value is valid.
* @QLINK_STA_INFO_SIGNAL_AVG: signal_avg value is valid.
* @QLINK_STA_INFO_RX_BITRATE: rxrate value is valid.
* @QLINK_STA_INFO_TX_BITRATE: txrate value is valid.
* @QLINK_STA_INFO_RX_PACKETS: rx_packets value is valid.
* @QLINK_STA_INFO_TX_PACKETS: tx_packets value is valid.
* @QLINK_STA_INFO_TX_RETRIES: tx_retries value is valid.
* @QLINK_STA_INFO_TX_FAILED: tx_failed value is valid.
* @QLINK_STA_INFO_STA_FLAGS: sta_flags value is valid.
*/
enum qlink_sta_info {
QLINK_STA_INFO_CONNECTED_TIME,
QLINK_STA_INFO_INACTIVE_TIME,
QLINK_STA_INFO_RX_BYTES,
QLINK_STA_INFO_TX_BYTES,
QLINK_STA_INFO_RX_BYTES64,
QLINK_STA_INFO_TX_BYTES64,
QLINK_STA_INFO_RX_DROP_MISC,
QLINK_STA_INFO_BEACON_RX,
QLINK_STA_INFO_SIGNAL,
QLINK_STA_INFO_SIGNAL_AVG,
QLINK_STA_INFO_RX_BITRATE,
QLINK_STA_INFO_TX_BITRATE,
QLINK_STA_INFO_RX_PACKETS,
QLINK_STA_INFO_TX_PACKETS,
QLINK_STA_INFO_TX_RETRIES,
QLINK_STA_INFO_TX_FAILED,
QLINK_STA_INFO_STA_FLAGS,
QLINK_STA_INFO_NUM,
};
/**
* struct qlink_sta_info_rate - STA rate statistics
*
* @rate: data rate in Mbps.
* @flags: bitmap of &enum qlink_sta_info_rate_flags.
* @mcs: 802.11-defined MCS index.
* nss: Number of Spatial Streams.
* @bw: bandwidth, one of &enum qlink_channel_width.
*/
struct qlink_sta_info_rate {
__le16 rate;
u8 flags;
u8 mcs;
u8 nss;
u8 bw;
} __packed;
/**
* struct qlink_sta_stats - data for QTN_TLV_ID_STA_STATS
*
* Carries statistics of a STA. Not all fields may be filled with
* valid values. Valid fields should be indicated as such using a bitmap of
* &enum qlink_sta_info. Bitmap is carried separately in a payload of
* QTN_TLV_ID_STA_STATS_MAP.
*/
struct qlink_sta_stats {
__le64 rx_bytes;
__le64 tx_bytes;
__le64 rx_beacon;
__le64 rx_duration;
__le64 t_offset;
__le32 connected_time;
__le32 inactive_time;
__le32 rx_packets;
__le32 tx_packets;
__le32 tx_retries;
__le32 tx_failed;
__le32 rx_dropped_misc;
__le32 beacon_loss_count;
__le32 expected_throughput;
struct qlink_sta_info_state sta_flags;
struct qlink_sta_info_rate txrate;
struct qlink_sta_info_rate rxrate;
__le16 llid;
__le16 plid;
u8 local_pm;
u8 peer_pm;
u8 nonpeer_pm;
u8 rx_beacon_signal_avg;
u8 plink_state;
u8 signal;
u8 signal_avg;
u8 rsvd[1];
};
/**
* struct qlink_random_mac_addr - data for QTN_TLV_ID_RANDOM_MAC_ADDR TLV
*
* Specifies MAC address mask/value for generation random MAC address
* during scan.
*
* @mac_addr: MAC address used with randomisation
* @mac_addr_mask: MAC address mask used with randomisation, bits that
* are 0 in the mask should be randomised, bits that are 1 should
* be taken from the @mac_addr
*/
struct qlink_random_mac_addr {
u8 mac_addr[ETH_ALEN];
u8 mac_addr_mask[ETH_ALEN];
} __packed;
/**
* struct qlink_wowlan_capab_data - data for QTN_TLV_ID_WOWLAN_CAPAB TLV
*
* WoWLAN capabilities supported by cards.
*
* @version: version of WoWLAN data structure, to ensure backward
* compatibility for firmwares with limited WoWLAN support
* @len: Total length of WoWLAN data
* @data: supported WoWLAN features
*/
struct qlink_wowlan_capab_data {
__le16 version;
__le16 len;
u8 data[0];
} __packed;
/**
* struct qlink_wowlan_support - supported WoWLAN capabilities
*
* @n_patterns: number of supported wakeup patterns
* @pattern_max_len: maximum length of each pattern
* @pattern_min_len: minimum length of each pattern
*/
struct qlink_wowlan_support {
__le32 n_patterns;
__le32 pattern_max_len;
__le32 pattern_min_len;
} __packed;
#endif /* _QTN_QLINK_H_ */