// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) by Jaroslav Kysela <perex@perex.cz> * Routines for control of MPU-401 in UART mode * * Modified for the Aureal Vortex based Soundcards * by Manuel Jander (mjande@embedded.cl). */ #include <linux/time.h> #include <linux/init.h> #include <sound/core.h> #include <sound/mpu401.h> #include "au88x0.h" /* Check for mpu401 mmio support. */ /* MPU401 legacy support is only provided as a emergency fallback * * for older versions of ALSA. Its usage is strongly discouraged. */ #ifndef MPU401_HW_AUREAL #define VORTEX_MPU401_LEGACY #endif /* Vortex MPU401 defines. */ #define MIDI_CLOCK_DIV 0x61 /* Standart MPU401 defines. */ #define MPU401_RESET 0xff #define MPU401_ENTER_UART 0x3f #define MPU401_ACK 0xfe static int snd_vortex_midi(vortex_t *vortex) { struct snd_rawmidi *rmidi; int temp, mode; struct snd_mpu401 *mpu; unsigned long port; #ifdef VORTEX_MPU401_LEGACY /* EnableHardCodedMPU401Port() */ /* Enable Legacy MIDI Interface port. */ port = (0x03 << 5); /* FIXME: static address. 0x330 */ temp = (hwread(vortex->mmio, VORTEX_CTRL) & ~CTRL_MIDI_PORT) | CTRL_MIDI_EN | port; hwwrite(vortex->mmio, VORTEX_CTRL, temp); #else /* Disable Legacy MIDI Interface port. */ temp = (hwread(vortex->mmio, VORTEX_CTRL) & ~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN; hwwrite(vortex->mmio, VORTEX_CTRL, temp); #endif /* Mpu401UartInit() */ mode = 1; temp = hwread(vortex->mmio, VORTEX_CTRL2) & 0xffff00cf; temp |= (MIDI_CLOCK_DIV << 8) | ((mode >> 24) & 0xff) << 4; hwwrite(vortex->mmio, VORTEX_CTRL2, temp); hwwrite(vortex->mmio, VORTEX_MIDI_CMD, MPU401_RESET); /* Check if anything is OK. */ temp = hwread(vortex->mmio, VORTEX_MIDI_DATA); if (temp != MPU401_ACK /*0xfe */ ) { dev_err(vortex->card->dev, "midi port doesn't acknowledge!\n"); return -ENODEV; } /* Enable MPU401 interrupts. */ hwwrite(vortex->mmio, VORTEX_IRQ_CTRL, hwread(vortex->mmio, VORTEX_IRQ_CTRL) | IRQ_MIDI); /* Create MPU401 instance. */ #ifdef VORTEX_MPU401_LEGACY if ((temp = snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_MPU401, 0x330, MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) { hwwrite(vortex->mmio, VORTEX_CTRL, (hwread(vortex->mmio, VORTEX_CTRL) & ~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN); return temp; } #else port = (unsigned long)(vortex->mmio + VORTEX_MIDI_DATA); if ((temp = snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port, MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO | MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) { hwwrite(vortex->mmio, VORTEX_CTRL, (hwread(vortex->mmio, VORTEX_CTRL) & ~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN); return temp; } mpu = rmidi->private_data; mpu->cport = (unsigned long)(vortex->mmio + VORTEX_MIDI_CMD); #endif /* Overwrite MIDI name */ snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI %d", CARD_NAME_SHORT , vortex->card->number); vortex->rmidi = rmidi; return 0; } |