* Clock and reset bindings for CSR atlas7

Required properties:
- compatible: Should be "sirf,atlas7-car"
- reg: Address and length of the register set
- #clock-cells: Should be <1>
- #reset-cells: Should be <1>

The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell.
The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c

The reset consumer should specify the desired reset by having the reset
ID in its "reset" phandle cell.
The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c

Examples: Clock and reset controller node:

car: clock-controller@18620000 {
	compatible = "sirf,atlas7-car";
	reg = <0x18620000 0x1000>;
	#clock-cells = <1>;
	#reset-cells = <1>;
};

Examples: Consumers using clock or reset:

timer@10dc0000 {
	compatible = "sirf,macro-tick";
	reg = <0x10dc0000 0x1000>;
	clocks = <&car 54>;
	interrupts = <0 0 0>,
		   <0 1 0>,
		   <0 2 0>,
		   <0 49 0>,
		   <0 50 0>,
		   <0 51 0>;
};

uart1: uart@18020000 {
	cell-index = <1>;
	compatible = "sirf,macro-uart";
	reg = <0x18020000 0x1000>;
	clocks = <&clks 95>;
	interrupts = <0 18 0>;
	fifosize = <32>;
};

vpp@13110000 {
	compatible = "sirf,prima2-vpp";
	reg = <0x13110000 0x10000>;
	interrupts = <0 31 0>;
	clocks = <&car 85>;
	resets = <&car 29>;
};