* AppliedMicro X-Gene v1 PCIe MSI controller
Required properties:
- compatible: should be "apm,xgene1-msi" to identify
X-Gene v1 PCIe MSI controller block.
- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node
- reg: physical base address (0x79000000) and length (0x900000) for controller
registers. These registers include the MSI termination address and data
registers as well as the MSI interrupt status registers.
- reg-names: not required
- interrupts: A list of 16 interrupt outputs of the controller, starting from
interrupt number 0x10 to 0x1f.
- interrupt-names: not required
Each PCIe node needs to have property msi-parent that points to an MSI
controller node
Examples:
SoC DTSI:
+ MSI node:
msi@79000000 {
compatible = "apm,xgene1-msi";
msi-controller;
reg = <0x00 0x79000000 0x0 0x900000>;
interrupts = <0x0 0x10 0x4>
<0x0 0x11 0x4>
<0x0 0x12 0x4>
<0x0 0x13 0x4>
<0x0 0x14 0x4>
<0x0 0x15 0x4>
<0x0 0x16 0x4>
<0x0 0x17 0x4>
<0x0 0x18 0x4>
<0x0 0x19 0x4>
<0x0 0x1a 0x4>
<0x0 0x1b 0x4>
<0x0 0x1c 0x4>
<0x0 0x1d 0x4>
<0x0 0x1e 0x4>
<0x0 0x1f 0x4>;
};
+ PCIe controller node with msi-parent property pointing to MSI node:
pcie0: pcie@1f2b0000 {
device_type = "pci";
compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
reg-names = "csr", "cfg";
ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
dma-coherent;
clocks = <&pcie0clk 0>;
msi-parent= <&msi>;
};