Ux500 MUSB Required properties: - compatible : Should be "stericsson,db8500-musb" - reg : Offset and length of registers - interrupts : Interrupt; mode, number and trigger - dr_mode : Dual-role; either host mode "host", peripheral mode "peripheral" or both "otg" Optional properties: - dmas : A list of dma channels; dma-controller, event-line, fixed-channel, flags - dma-names : An ordered list of channel names affiliated to the above Example: usb_per5@a03e0000 { compatible = "stericsson,db8500-musb"; reg = <0xa03e0000 0x10000>; interrupts = <0 23 0x4>; interrupt-names = "mc"; dr_mode = "otg"; dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */ <&dma 38 0 0x0>, /* Logical - MemToDev */ <&dma 37 0 0x2>, /* Logical - DevToMem */ <&dma 37 0 0x0>, /* Logical - MemToDev */ <&dma 36 0 0x2>, /* Logical - DevToMem */ <&dma 36 0 0x0>, /* Logical - MemToDev */ <&dma 19 0 0x2>, /* Logical - DevToMem */ <&dma 19 0 0x0>, /* Logical - MemToDev */ <&dma 18 0 0x2>, /* Logical - DevToMem */ <&dma 18 0 0x0>, /* Logical - MemToDev */ <&dma 17 0 0x2>, /* Logical - DevToMem */ <&dma 17 0 0x0>, /* Logical - MemToDev */ <&dma 16 0 0x2>, /* Logical - DevToMem */ <&dma 16 0 0x0>, /* Logical - MemToDev */ <&dma 39 0 0x2>, /* Logical - DevToMem */ <&dma 39 0 0x0>; /* Logical - MemToDev */ dma-names = "iep_1_9", "oep_1_9", "iep_2_10", "oep_2_10", "iep_3_11", "oep_3_11", "iep_4_12", "oep_4_12", "iep_5_13", "oep_5_13", "iep_6_14", "oep_6_14", "iep_7_15", "oep_7_15", "iep_8", "oep_8"; }; |