/*
* Copyright 2012-15 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: AMD
*
*/
#include <linux/delay.h>
#include <linux/slab.h>
#include "dm_services.h"
#include "dce/dce_11_2_d.h"
#include "dce/dce_11_2_sh_mask.h"
#include "gmc/gmc_8_1_sh_mask.h"
#include "gmc/gmc_8_1_d.h"
#include "include/logger_interface.h"
#include "dce112_compressor.h"
#define DC_LOGGER \
cp110->base.ctx->logger
#define DCP_REG(reg)\
(reg + cp110->offsets.dcp_offset)
#define DMIF_REG(reg)\
(reg + cp110->offsets.dmif_offset)
static const struct dce112_compressor_reg_offsets reg_offsets[] = {
{
.dcp_offset = (mmDCP0_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
.dmif_offset =
(mmDMIF_PG0_DPG_PIPE_DPM_CONTROL
- mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
},
{
.dcp_offset = (mmDCP1_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
.dmif_offset =
(mmDMIF_PG1_DPG_PIPE_DPM_CONTROL
- mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
},
{
.dcp_offset = (mmDCP2_GRPH_CONTROL - mmDCP0_GRPH_CONTROL),
.dmif_offset =
(mmDMIF_PG2_DPG_PIPE_DPM_CONTROL
- mmDMIF_PG0_DPG_PIPE_DPM_CONTROL),
}
};
static const uint32_t dce11_one_lpt_channel_max_resolution = 2560 * 1600;
enum fbc_idle_force {
/* Bit 0 - Display registers updated */
FBC_IDLE_FORCE_DISPLAY_REGISTER_UPDATE = 0x00000001,
/* Bit 2 - FBC_GRPH_COMP_EN register updated */
FBC_IDLE_FORCE_GRPH_COMP_EN = 0x00000002,
/* Bit 3 - FBC_SRC_SEL register updated */
FBC_IDLE_FORCE_SRC_SEL_CHANGE = 0x00000004,
/* Bit 4 - FBC_MIN_COMPRESSION register updated */
FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE = 0x00000008,
/* Bit 5 - FBC_ALPHA_COMP_EN register updated */
FBC_IDLE_FORCE_ALPHA_COMP_EN = 0x00000010,
/* Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated */
FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN = 0x00000020,
/* Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated */
FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF = 0x00000040,
/* Bit 24 - Memory write to region 0 defined by MC registers. */
FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION0 = 0x01000000,
/* Bit 25 - Memory write to region 1 defined by MC registers */
FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION1 = 0x02000000,
/* Bit 26 - Memory write to region 2 defined by MC registers */
FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION2 = 0x04000000,
/* Bit 27 - Memory write to region 3 defined by MC registers. */
FBC_IDLE_FORCE_MEMORY_WRITE_TO_REGION3 = 0x08000000,
/* Bit 28 - Memory write from any client other than MCIF */
FBC_IDLE_FORCE_MEMORY_WRITE_OTHER_THAN_MCIF = 0x10000000,
/* Bit 29 - CG statics screen signal is inactive */
FBC_IDLE_FORCE_CG_STATIC_SCREEN_IS_INACTIVE = 0x20000000,
};
static uint32_t lpt_size_alignment(struct dce112_compressor *cp110)
{
/*LPT_ALIGNMENT (in bytes) = ROW_SIZE * #BANKS * # DRAM CHANNELS. */
return cp110->base.raw_size * cp110->base.banks_num *
cp110->base.dram_channels_num;
}
static uint32_t lpt_memory_control_config(struct dce112_compressor *cp110,
uint32_t lpt_control)
{
/*LPT MC Config */
if (cp110->base.options.bits.LPT_MC_CONFIG == 1) {
/* POSSIBLE VALUES for LPT NUM_PIPES (DRAM CHANNELS):
* 00 - 1 CHANNEL
* 01 - 2 CHANNELS
* 02 - 4 OR 6 CHANNELS
* (Only for discrete GPU, N/A for CZ)
* 03 - 8 OR 12 CHANNELS
* (Only for discrete GPU, N/A for CZ) */
switch (cp110->base.dram_channels_num) {
case 2:
set_reg_field_value(
lpt_control,
1,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_NUM_PIPES);
break;
case 1:
set_reg_field_value(
lpt_control,
0,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_NUM_PIPES);
break;
default:
DC_LOG_WARNING(
"%s: Invalid LPT NUM_PIPES!!!",
__func__);
break;
}
/* The mapping for LPT NUM_BANKS is in
* GRPH_CONTROL.GRPH_NUM_BANKS register field
* Specifies the number of memory banks for tiling
* purposes. Only applies to 2D and 3D tiling modes.
* POSSIBLE VALUES:
* 00 - DCP_GRPH_NUM_BANKS_2BANK: ADDR_SURF_2_BANK
* 01 - DCP_GRPH_NUM_BANKS_4BANK: ADDR_SURF_4_BANK
* 02 - DCP_GRPH_NUM_BANKS_8BANK: ADDR_SURF_8_BANK
* 03 - DCP_GRPH_NUM_BANKS_16BANK: ADDR_SURF_16_BANK */
switch (cp110->base.banks_num) {
case 16:
set_reg_field_value(
lpt_control,
3,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_NUM_BANKS);
break;
case 8:
set_reg_field_value(
lpt_control,
2,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_NUM_BANKS);
break;
case 4:
set_reg_field_value(
lpt_control,
1,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_NUM_BANKS);
break;
case 2:
set_reg_field_value(
lpt_control,
0,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_NUM_BANKS);
break;
default:
DC_LOG_WARNING(
"%s: Invalid LPT NUM_BANKS!!!",
__func__);
break;
}
/* The mapping is in DMIF_ADDR_CALC.
* ADDR_CONFIG_PIPE_INTERLEAVE_SIZE register field for
* Carrizo specifies the memory interleave per pipe.
* It effectively specifies the location of pipe bits in
* the memory address.
* POSSIBLE VALUES:
* 00 - ADDR_CONFIG_PIPE_INTERLEAVE_256B: 256 byte
* interleave
* 01 - ADDR_CONFIG_PIPE_INTERLEAVE_512B: 512 byte
* interleave
*/
switch (cp110->base.channel_interleave_size) {
case 256: /*256B */
set_reg_field_value(
lpt_control,
0,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_PIPE_INTERLEAVE_SIZE);
break;
case 512: /*512B */
set_reg_field_value(
lpt_control,
1,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_PIPE_INTERLEAVE_SIZE);
break;
default:
DC_LOG_WARNING(
"%s: Invalid LPT INTERLEAVE_SIZE!!!",
__func__);
break;
}
/* The mapping for LOW_POWER_TILING_ROW_SIZE is in
* DMIF_ADDR_CALC.ADDR_CONFIG_ROW_SIZE register field
* for Carrizo. Specifies the size of dram row in bytes.
* This should match up with NOOFCOLS field in
* MC_ARB_RAMCFG (ROW_SIZE = 4 * 2 ^^ columns).
* This register DMIF_ADDR_CALC is not used by the
* hardware as it is only used for addrlib assertions.
* POSSIBLE VALUES:
* 00 - ADDR_CONFIG_1KB_ROW: Treat 1KB as DRAM row
* boundary
* 01 - ADDR_CONFIG_2KB_ROW: Treat 2KB as DRAM row
* boundary
* 02 - ADDR_CONFIG_4KB_ROW: Treat 4KB as DRAM row
* boundary */
switch (cp110->base.raw_size) {
case 4096: /*4 KB */
set_reg_field_value(
lpt_control,
2,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_ROW_SIZE);
break;
case 2048:
set_reg_field_value(
lpt_control,
1,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_ROW_SIZE);
break;
case 1024:
set_reg_field_value(
lpt_control,
0,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_ROW_SIZE);
break;
default:
DC_LOG_WARNING(
"%s: Invalid LPT ROW_SIZE!!!",
__func__);
break;
}
} else {
DC_LOG_WARNING(
"%s: LPT MC Configuration is not provided",
__func__);
}
return lpt_control;
}
static bool is_source_bigger_than_epanel_size(
struct dce112_compressor *cp110,
uint32_t source_view_width,
uint32_t source_view_height)
{
if (cp110->base.embedded_panel_h_size != 0 &&
cp110->base.embedded_panel_v_size != 0 &&
((source_view_width * source_view_height) >
(cp110->base.embedded_panel_h_size *
cp110->base.embedded_panel_v_size)))
return true;
return false;
}
static uint32_t align_to_chunks_number_per_line(
struct dce112_compressor *cp110,
uint32_t pixels)
{
return 256 * ((pixels + 255) / 256);
}
static void wait_for_fbc_state_changed(
struct dce112_compressor *cp110,
bool enabled)
{
uint8_t counter = 0;
uint32_t addr = mmFBC_STATUS;
uint32_t value;
while (counter < 10) {
value = dm_read_reg(cp110->base.ctx, addr);
if (get_reg_field_value(
value,
FBC_STATUS,
FBC_ENABLE_STATUS) == enabled)
break;
udelay(10);
counter++;
}
if (counter == 10) {
DC_LOG_WARNING(
"%s: wait counter exceeded, changes to HW not applied",
__func__);
}
}
void dce112_compressor_power_up_fbc(struct compressor *compressor)
{
uint32_t value;
uint32_t addr;
addr = mmFBC_CNTL;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
set_reg_field_value(value, 1, FBC_CNTL, FBC_EN);
set_reg_field_value(value, 2, FBC_CNTL, FBC_COHERENCY_MODE);
if (compressor->options.bits.CLK_GATING_DISABLED == 1) {
/* HW needs to do power measurement comparison. */
set_reg_field_value(
value,
0,
FBC_CNTL,
FBC_COMP_CLK_GATE_EN);
}
dm_write_reg(compressor->ctx, addr, value);
addr = mmFBC_COMP_MODE;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_RLE_EN);
set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_DPCM4_RGB_EN);
set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_IND_EN);
dm_write_reg(compressor->ctx, addr, value);
addr = mmFBC_COMP_CNTL;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(value, 1, FBC_COMP_CNTL, FBC_DEPTH_RGB08_EN);
dm_write_reg(compressor->ctx, addr, value);
/*FBC_MIN_COMPRESSION 0 ==> 2:1 */
/* 1 ==> 4:1 */
/* 2 ==> 8:1 */
/* 0xF ==> 1:1 */
set_reg_field_value(value, 0xF, FBC_COMP_CNTL, FBC_MIN_COMPRESSION);
dm_write_reg(compressor->ctx, addr, value);
compressor->min_compress_ratio = FBC_COMPRESS_RATIO_1TO1;
value = 0;
dm_write_reg(compressor->ctx, mmFBC_IND_LUT0, value);
value = 0xFFFFFF;
dm_write_reg(compressor->ctx, mmFBC_IND_LUT1, value);
}
void dce112_compressor_enable_fbc(
struct compressor *compressor,
uint32_t paths_num,
struct compr_addr_and_pitch_params *params)
{
struct dce112_compressor *cp110 = TO_DCE112_COMPRESSOR(compressor);
if (compressor->options.bits.FBC_SUPPORT &&
(compressor->options.bits.DUMMY_BACKEND == 0) &&
(!dce112_compressor_is_fbc_enabled_in_hw(compressor, NULL)) &&
(!is_source_bigger_than_epanel_size(
cp110,
params->source_view_width,
params->source_view_height))) {
uint32_t addr;
uint32_t value;
/* Before enabling FBC first need to enable LPT if applicable
* LPT state should always be changed (enable/disable) while FBC
* is disabled */
if (compressor->options.bits.LPT_SUPPORT && (paths_num < 2) &&
(params->source_view_width *
params->source_view_height <=
dce11_one_lpt_channel_max_resolution)) {
dce112_compressor_enable_lpt(compressor);
}
addr = mmFBC_CNTL;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN);
set_reg_field_value(
value,
params->inst,
FBC_CNTL, FBC_SRC_SEL);
dm_write_reg(compressor->ctx, addr, value);
/* Keep track of enum controller_id FBC is attached to */
compressor->is_enabled = true;
compressor->attached_inst = params->inst;
cp110->offsets = reg_offsets[params->inst];
/*Toggle it as there is bug in HW */
set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
dm_write_reg(compressor->ctx, addr, value);
set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN);
dm_write_reg(compressor->ctx, addr, value);
wait_for_fbc_state_changed(cp110, true);
}
}
void dce112_compressor_disable_fbc(struct compressor *compressor)
{
struct dce112_compressor *cp110 = TO_DCE112_COMPRESSOR(compressor);
if (compressor->options.bits.FBC_SUPPORT &&
dce112_compressor_is_fbc_enabled_in_hw(compressor, NULL)) {
uint32_t reg_data;
/* Turn off compression */
reg_data = dm_read_reg(compressor->ctx, mmFBC_CNTL);
set_reg_field_value(reg_data, 0, FBC_CNTL, FBC_GRPH_COMP_EN);
dm_write_reg(compressor->ctx, mmFBC_CNTL, reg_data);
/* Reset enum controller_id to undefined */
compressor->attached_inst = 0;
compressor->is_enabled = false;
/* Whenever disabling FBC make sure LPT is disabled if LPT
* supported */
if (compressor->options.bits.LPT_SUPPORT)
dce112_compressor_disable_lpt(compressor);
wait_for_fbc_state_changed(cp110, false);
}
}
bool dce112_compressor_is_fbc_enabled_in_hw(
struct compressor *compressor,
uint32_t *inst)
{
/* Check the hardware register */
uint32_t value;
value = dm_read_reg(compressor->ctx, mmFBC_STATUS);
if (get_reg_field_value(value, FBC_STATUS, FBC_ENABLE_STATUS)) {
if (inst != NULL)
*inst = compressor->attached_inst;
return true;
}
value = dm_read_reg(compressor->ctx, mmFBC_MISC);
if (get_reg_field_value(value, FBC_MISC, FBC_STOP_ON_HFLIP_EVENT)) {
value = dm_read_reg(compressor->ctx, mmFBC_CNTL);
if (get_reg_field_value(value, FBC_CNTL, FBC_GRPH_COMP_EN)) {
if (inst != NULL)
*inst =
compressor->attached_inst;
return true;
}
}
return false;
}
bool dce112_compressor_is_lpt_enabled_in_hw(struct compressor *compressor)
{
/* Check the hardware register */
uint32_t value = dm_read_reg(compressor->ctx,
mmLOW_POWER_TILING_CONTROL);
return get_reg_field_value(
value,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_ENABLE);
}
void dce112_compressor_program_compressed_surface_address_and_pitch(
struct compressor *compressor,
struct compr_addr_and_pitch_params *params)
{
struct dce112_compressor *cp110 = TO_DCE112_COMPRESSOR(compressor);
uint32_t value = 0;
uint32_t fbc_pitch = 0;
uint32_t compressed_surf_address_low_part =
compressor->compr_surface_address.addr.low_part;
/* Clear content first. */
dm_write_reg(
compressor->ctx,
DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH),
0);
dm_write_reg(compressor->ctx,
DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS), 0);
if (compressor->options.bits.LPT_SUPPORT) {
uint32_t lpt_alignment = lpt_size_alignment(cp110);
if (lpt_alignment != 0) {
compressed_surf_address_low_part =
((compressed_surf_address_low_part
+ (lpt_alignment - 1)) / lpt_alignment)
* lpt_alignment;
}
}
/* Write address, HIGH has to be first. */
dm_write_reg(compressor->ctx,
DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH),
compressor->compr_surface_address.addr.high_part);
dm_write_reg(compressor->ctx,
DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS),
compressed_surf_address_low_part);
fbc_pitch = align_to_chunks_number_per_line(
cp110,
params->source_view_width);
if (compressor->min_compress_ratio == FBC_COMPRESS_RATIO_1TO1)
fbc_pitch = fbc_pitch / 8;
else
DC_LOG_WARNING(
"%s: Unexpected DCE11 compression ratio",
__func__);
/* Clear content first. */
dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), 0);
/* Write FBC Pitch. */
set_reg_field_value(
value,
fbc_pitch,
GRPH_COMPRESS_PITCH,
GRPH_COMPRESS_PITCH);
dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), value);
}
void dce112_compressor_disable_lpt(struct compressor *compressor)
{
struct dce112_compressor *cp110 = TO_DCE112_COMPRESSOR(compressor);
uint32_t value;
uint32_t addr;
uint32_t inx;
/* Disable all pipes LPT Stutter */
for (inx = 0; inx < 3; inx++) {
value =
dm_read_reg(
compressor->ctx,
DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH));
set_reg_field_value(
value,
0,
DPG_PIPE_STUTTER_CONTROL_NONLPTCH,
STUTTER_ENABLE_NONLPTCH);
dm_write_reg(
compressor->ctx,
DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH),
value);
}
/* Disable Underlay pipe LPT Stutter */
addr = mmDPGV0_PIPE_STUTTER_CONTROL_NONLPTCH;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
0,
DPGV0_PIPE_STUTTER_CONTROL_NONLPTCH,
STUTTER_ENABLE_NONLPTCH);
dm_write_reg(compressor->ctx, addr, value);
/* Disable LPT */
addr = mmLOW_POWER_TILING_CONTROL;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
0,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_ENABLE);
dm_write_reg(compressor->ctx, addr, value);
/* Clear selection of Channel(s) containing Compressed Surface */
addr = mmGMCON_LPT_TARGET;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
0xFFFFFFFF,
GMCON_LPT_TARGET,
STCTRL_LPT_TARGET);
dm_write_reg(compressor->ctx, mmGMCON_LPT_TARGET, value);
}
void dce112_compressor_enable_lpt(struct compressor *compressor)
{
struct dce112_compressor *cp110 = TO_DCE112_COMPRESSOR(compressor);
uint32_t value;
uint32_t addr;
uint32_t value_control;
uint32_t channels;
/* Enable LPT Stutter from Display pipe */
value = dm_read_reg(compressor->ctx,
DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH));
set_reg_field_value(
value,
1,
DPG_PIPE_STUTTER_CONTROL_NONLPTCH,
STUTTER_ENABLE_NONLPTCH);
dm_write_reg(compressor->ctx,
DMIF_REG(mmDPG_PIPE_STUTTER_CONTROL_NONLPTCH), value);
/* Enable Underlay pipe LPT Stutter */
addr = mmDPGV0_PIPE_STUTTER_CONTROL_NONLPTCH;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
1,
DPGV0_PIPE_STUTTER_CONTROL_NONLPTCH,
STUTTER_ENABLE_NONLPTCH);
dm_write_reg(compressor->ctx, addr, value);
/* Selection of Channel(s) containing Compressed Surface: 0xfffffff
* will disable LPT.
* STCTRL_LPT_TARGETn corresponds to channel n. */
addr = mmLOW_POWER_TILING_CONTROL;
value_control = dm_read_reg(compressor->ctx, addr);
channels = get_reg_field_value(value_control,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_MODE);
addr = mmGMCON_LPT_TARGET;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
channels + 1, /* not mentioned in programming guide,
but follow DCE8.1 */
GMCON_LPT_TARGET,
STCTRL_LPT_TARGET);
dm_write_reg(compressor->ctx, addr, value);
/* Enable LPT */
addr = mmLOW_POWER_TILING_CONTROL;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
1,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_ENABLE);
dm_write_reg(compressor->ctx, addr, value);
}
void dce112_compressor_program_lpt_control(
struct compressor *compressor,
struct compr_addr_and_pitch_params *params)
{
struct dce112_compressor *cp110 = TO_DCE112_COMPRESSOR(compressor);
uint32_t rows_per_channel;
uint32_t lpt_alignment;
uint32_t source_view_width;
uint32_t source_view_height;
uint32_t lpt_control = 0;
if (!compressor->options.bits.LPT_SUPPORT)
return;
lpt_control = dm_read_reg(compressor->ctx,
mmLOW_POWER_TILING_CONTROL);
/* POSSIBLE VALUES for Low Power Tiling Mode:
* 00 - Use channel 0
* 01 - Use Channel 0 and 1
* 02 - Use Channel 0,1,2,3
* 03 - reserved */
switch (compressor->lpt_channels_num) {
/* case 2:
* Use Channel 0 & 1 / Not used for DCE 11 */
case 1:
/*Use Channel 0 for LPT for DCE 11 */
set_reg_field_value(
lpt_control,
0,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_MODE);
break;
default:
DC_LOG_WARNING(
"%s: Invalid selected DRAM channels for LPT!!!",
__func__);
break;
}
lpt_control = lpt_memory_control_config(cp110, lpt_control);
/* Program LOW_POWER_TILING_ROWS_PER_CHAN field which depends on
* FBC compressed surface pitch.
* LOW_POWER_TILING_ROWS_PER_CHAN = Roundup ((Surface Height *
* Surface Pitch) / (Row Size * Number of Channels *
* Number of Banks)). */
rows_per_channel = 0;
lpt_alignment = lpt_size_alignment(cp110);
source_view_width =
align_to_chunks_number_per_line(
cp110,
params->source_view_width);
source_view_height = (params->source_view_height + 1) & (~0x1);
if (lpt_alignment != 0) {
rows_per_channel = source_view_width * source_view_height * 4;
rows_per_channel =
(rows_per_channel % lpt_alignment) ?
(rows_per_channel / lpt_alignment + 1) :
rows_per_channel / lpt_alignment;
}
set_reg_field_value(
lpt_control,
rows_per_channel,
LOW_POWER_TILING_CONTROL,
LOW_POWER_TILING_ROWS_PER_CHAN);
dm_write_reg(compressor->ctx,
mmLOW_POWER_TILING_CONTROL, lpt_control);
}
/*
* DCE 11 Frame Buffer Compression Implementation
*/
void dce112_compressor_set_fbc_invalidation_triggers(
struct compressor *compressor,
uint32_t fbc_trigger)
{
/* Disable region hit event, FBC_MEMORY_REGION_MASK = 0 (bits 16-19)
* for DCE 11 regions cannot be used - does not work with S/G
*/
uint32_t addr = mmFBC_CLIENT_REGION_MASK;
uint32_t value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
0,
FBC_CLIENT_REGION_MASK,
FBC_MEMORY_REGION_MASK);
dm_write_reg(compressor->ctx, addr, value);
/* Setup events when to clear all CSM entries (effectively marking
* current compressed data invalid)
* For DCE 11 CSM metadata 11111 means - "Not Compressed"
* Used as the initial value of the metadata sent to the compressor
* after invalidation, to indicate that the compressor should attempt
* to compress all chunks on the current pass. Also used when the chunk
* is not successfully written to memory.
* When this CSM value is detected, FBC reads from the uncompressed
* buffer. Set events according to passed in value, these events are
* valid for DCE11:
* - bit 0 - display register updated
* - bit 28 - memory write from any client except from MCIF
* - bit 29 - CG static screen signal is inactive
* In addition, DCE11.1 also needs to set new DCE11.1 specific events
* that are used to trigger invalidation on certain register changes,
* for example enabling of Alpha Compression may trigger invalidation of
* FBC once bit is set. These events are as follows:
* - Bit 2 - FBC_GRPH_COMP_EN register updated
* - Bit 3 - FBC_SRC_SEL register updated
* - Bit 4 - FBC_MIN_COMPRESSION register updated
* - Bit 5 - FBC_ALPHA_COMP_EN register updated
* - Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated
* - Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated
*/
addr = mmFBC_IDLE_FORCE_CLEAR_MASK;
value = dm_read_reg(compressor->ctx, addr);
set_reg_field_value(
value,
fbc_trigger |
FBC_IDLE_FORCE_GRPH_COMP_EN |
FBC_IDLE_FORCE_SRC_SEL_CHANGE |
FBC_IDLE_FORCE_MIN_COMPRESSION_CHANGE |
FBC_IDLE_FORCE_ALPHA_COMP_EN |
FBC_IDLE_FORCE_ZERO_ALPHA_CHUNK_SKIP_EN |
FBC_IDLE_FORCE_FORCE_COPY_TO_COMP_BUF,
FBC_IDLE_FORCE_CLEAR_MASK,
FBC_IDLE_FORCE_CLEAR_MASK);
dm_write_reg(compressor->ctx, addr, value);
}
void dce112_compressor_construct(struct dce112_compressor *compressor,
struct dc_context *ctx)
{
struct dc_bios *bp = ctx->dc_bios;
struct embedded_panel_info panel_info;
compressor->base.options.raw = 0;
compressor->base.options.bits.FBC_SUPPORT = true;
compressor->base.options.bits.LPT_SUPPORT = true;
/* For DCE 11 always use one DRAM channel for LPT */
compressor->base.lpt_channels_num = 1;
compressor->base.options.bits.DUMMY_BACKEND = false;
/* Check if this system has more than 1 DRAM channel; if only 1 then LPT
* should not be supported */
if (compressor->base.memory_bus_width == 64)
compressor->base.options.bits.LPT_SUPPORT = false;
compressor->base.options.bits.CLK_GATING_DISABLED = false;
compressor->base.ctx = ctx;
compressor->base.embedded_panel_h_size = 0;
compressor->base.embedded_panel_v_size = 0;
compressor->base.memory_bus_width = ctx->asic_id.vram_width;
compressor->base.allocated_size = 0;
compressor->base.preferred_requested_size = 0;
compressor->base.min_compress_ratio = FBC_COMPRESS_RATIO_INVALID;
compressor->base.banks_num = 0;
compressor->base.raw_size = 0;
compressor->base.channel_interleave_size = 0;
compressor->base.dram_channels_num = 0;
compressor->base.lpt_channels_num = 0;
compressor->base.attached_inst = 0;
compressor->base.is_enabled = false;
if (BP_RESULT_OK ==
bp->funcs->get_embedded_panel_info(bp, &panel_info)) {
compressor->base.embedded_panel_h_size =
panel_info.lcd_timing.horizontal_addressable;
compressor->base.embedded_panel_v_size =
panel_info.lcd_timing.vertical_addressable;
}
}
struct compressor *dce112_compressor_create(struct dc_context *ctx)
{
struct dce112_compressor *cp110 =
kzalloc(sizeof(struct dce112_compressor), GFP_KERNEL);
if (!cp110)
return NULL;
dce112_compressor_construct(cp110, ctx);
return &cp110->base;
}
void dce112_compressor_destroy(struct compressor **compressor)
{
kfree(TO_DCE112_COMPRESSOR(*compressor));
*compressor = NULL;
}