Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * TAS5086 ASoC codec driver
 *
 * Copyright (c) 2013 Daniel Mack <zonque@gmail.com>
 *
 * TODO:
 *  - implement DAPM and input muxing
 *  - implement modulation limit
 *  - implement non-default PWM start
 *
 * Note that this chip has a very unusual register layout, specifically
 * because the registers are of unequal size, and multi-byte registers
 * require bulk writes to take effect. Regmap does not support that kind
 * of devices.
 *
 * Currently, the driver does not touch any of the registers >= 0x20, so
 * it doesn't matter because the entire map can be accessed as 8-bit
 * array. In case more features will be added in the future
 * that require access to higher registers, the entire regmap H/W I/O
 * routines have to be open-coded.
 */

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <sound/tas5086.h>

#define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE  |		\
			     SNDRV_PCM_FMTBIT_S20_3LE |		\
			     SNDRV_PCM_FMTBIT_S24_3LE)

#define TAS5086_PCM_RATES   (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100  | \
			     SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200  | \
			     SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
			     SNDRV_PCM_RATE_192000)

/*
 * TAS5086 registers
 */
#define TAS5086_CLOCK_CONTROL		0x00	/* Clock control register  */
#define TAS5086_CLOCK_RATE(val)		(val << 5)
#define TAS5086_CLOCK_RATE_MASK		(0x7 << 5)
#define TAS5086_CLOCK_RATIO(val)	(val << 2)
#define TAS5086_CLOCK_RATIO_MASK	(0x7 << 2)
#define TAS5086_CLOCK_SCLK_RATIO_48	(1 << 1)
#define TAS5086_CLOCK_VALID		(1 << 0)

#define TAS5086_DEEMPH_MASK		0x03
#define TAS5086_SOFT_MUTE_ALL		0x3f

#define TAS5086_DEV_ID			0x01	/* Device ID register */
#define TAS5086_ERROR_STATUS		0x02	/* Error status register */
#define TAS5086_SYS_CONTROL_1		0x03	/* System control register 1 */
#define TAS5086_SERIAL_DATA_IF		0x04	/* Serial data interface register  */
#define TAS5086_SYS_CONTROL_2		0x05	/* System control register 2 */
#define TAS5086_SOFT_MUTE		0x06	/* Soft mute register */
#define TAS5086_MASTER_VOL		0x07	/* Master volume  */
#define TAS5086_CHANNEL_VOL(X)		(0x08 + (X))	/* Channel 1-6 volume */
#define TAS5086_VOLUME_CONTROL		0x09	/* Volume control register */
#define TAS5086_MOD_LIMIT		0x10	/* Modulation limit register */
#define TAS5086_PWM_START		0x18	/* PWM start register */
#define TAS5086_SURROUND		0x19	/* Surround register */
#define TAS5086_SPLIT_CAP_CHARGE	0x1a	/* Split cap charge period register */
#define TAS5086_OSC_TRIM		0x1b	/* Oscillator trim register */
#define TAS5086_BKNDERR 		0x1c
#define TAS5086_INPUT_MUX		0x20
#define TAS5086_PWM_OUTPUT_MUX		0x25

#define TAS5086_MAX_REGISTER		TAS5086_PWM_OUTPUT_MUX

#define TAS5086_PWM_START_MIDZ_FOR_START_1	(1 << 7)
#define TAS5086_PWM_START_MIDZ_FOR_START_2	(1 << 6)
#define TAS5086_PWM_START_CHANNEL_MASK		(0x3f)

/*
 * Default TAS5086 power-up configuration
 */
static const struct reg_default tas5086_reg_defaults[] = {
	{ 0x00,	0x6c },
	{ 0x01,	0x03 },
	{ 0x02,	0x00 },
	{ 0x03,	0xa0 },
	{ 0x04,	0x05 },
	{ 0x05,	0x60 },
	{ 0x06,	0x00 },
	{ 0x07,	0xff },
	{ 0x08,	0x30 },
	{ 0x09,	0x30 },
	{ 0x0a,	0x30 },
	{ 0x0b,	0x30 },
	{ 0x0c,	0x30 },
	{ 0x0d,	0x30 },
	{ 0x0e,	0xb1 },
	{ 0x0f,	0x00 },
	{ 0x10,	0x02 },
	{ 0x11,	0x00 },
	{ 0x12,	0x00 },
	{ 0x13,	0x00 },
	{ 0x14,	0x00 },
	{ 0x15,	0x00 },
	{ 0x16,	0x00 },
	{ 0x17,	0x00 },
	{ 0x18,	0x3f },
	{ 0x19,	0x00 },
	{ 0x1a,	0x18 },
	{ 0x1b,	0x82 },
	{ 0x1c,	0x05 },
};

static int tas5086_register_size(struct device *dev, unsigned int reg)
{
	switch (reg) {
	case TAS5086_CLOCK_CONTROL ... TAS5086_BKNDERR:
		return 1;
	case TAS5086_INPUT_MUX:
	case TAS5086_PWM_OUTPUT_MUX:
		return 4;
	}

	dev_err(dev, "Unsupported register address: %d\n", reg);
	return 0;
}

static bool tas5086_accessible_reg(struct device *dev, unsigned int reg)
{
	switch (reg) {
	case 0x0f:
	case 0x11 ... 0x17:
	case 0x1d ... 0x1f:
		return false;
	default:
		return true;
	}
}

static bool tas5086_volatile_reg(struct device *dev, unsigned int reg)
{
	switch (reg) {
	case TAS5086_DEV_ID:
	case TAS5086_ERROR_STATUS:
		return true;
	}

	return false;
}

static bool tas5086_writeable_reg(struct device *dev, unsigned int reg)
{
	return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID);
}

static int tas5086_reg_write(void *context, unsigned int reg,
			      unsigned int value)
{
	struct i2c_client *client = context;
	unsigned int i, size;
	uint8_t buf[5];
	int ret;

	size = tas5086_register_size(&client->dev, reg);
	if (size == 0)
		return -EINVAL;

	buf[0] = reg;

	for (i = size; i >= 1; --i) {
		buf[i] = value;
		value >>= 8;
	}

	ret = i2c_master_send(client, buf, size + 1);
	if (ret == size + 1)
		return 0;
	else if (ret < 0)
		return ret;
	else
		return -EIO;
}

static int tas5086_reg_read(void *context, unsigned int reg,
			     unsigned int *value)
{
	struct i2c_client *client = context;
	uint8_t send_buf, recv_buf[4];
	struct i2c_msg msgs[2];
	unsigned int size;
	unsigned int i;
	int ret;

	size = tas5086_register_size(&client->dev, reg);
	if (size == 0)
		return -EINVAL;

	send_buf = reg;

	msgs[0].addr = client->addr;
	msgs[0].len = sizeof(send_buf);
	msgs[0].buf = &send_buf;
	msgs[0].flags = 0;

	msgs[1].addr = client->addr;
	msgs[1].len = size;
	msgs[1].buf = recv_buf;
	msgs[1].flags = I2C_M_RD;

	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
	if (ret < 0)
		return ret;
	else if (ret != ARRAY_SIZE(msgs))
		return -EIO;

	*value = 0;

	for (i = 0; i < size; i++) {
		*value <<= 8;
		*value |= recv_buf[i];
	}

	return 0;
}

static const char * const supply_names[] = {
	"dvdd", "avdd"
};

struct tas5086_private {
	struct regmap	*regmap;
	unsigned int	mclk, sclk;
	unsigned int	format;
	bool		deemph;
	unsigned int	charge_period;
	unsigned int	pwm_start_mid_z;
	/* Current sample rate for de-emphasis control */
	int		rate;
	/* GPIO driving Reset pin, if any */
	int		gpio_nreset;
	struct		regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
};

static int tas5086_deemph[] = { 0, 32000, 44100, 48000 };

static int tas5086_set_deemph(struct snd_soc_component *component)
{
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
	int i, val = 0;

	if (priv->deemph) {
		for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) {
			if (tas5086_deemph[i] == priv->rate) {
				val = i;
				break;
			}
		}
	}

	return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1,
				  TAS5086_DEEMPH_MASK, val);
}

static int tas5086_get_deemph(struct snd_kcontrol *kcontrol,
			      struct snd_ctl_elem_value *ucontrol)
{
	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);

	ucontrol->value.integer.value[0] = priv->deemph;

	return 0;
}

static int tas5086_put_deemph(struct snd_kcontrol *kcontrol,
			      struct snd_ctl_elem_value *ucontrol)
{
	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);

	priv->deemph = ucontrol->value.integer.value[0];

	return tas5086_set_deemph(component);
}


static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai,
				  int clk_id, unsigned int freq, int dir)
{
	struct snd_soc_component *component = codec_dai->component;
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);

	switch (clk_id) {
	case TAS5086_CLK_IDX_MCLK:
		priv->mclk = freq;
		break;
	case TAS5086_CLK_IDX_SCLK:
		priv->sclk = freq;
		break;
	}

	return 0;
}

static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai,
			       unsigned int format)
{
	struct snd_soc_component *component = codec_dai->component;
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);

	/* The TAS5086 can only be slave to all clocks */
	if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
		dev_err(component->dev, "Invalid clocking mode\n");
		return -EINVAL;
	}

	/* we need to refer to the data format from hw_params() */
	priv->format = format;

	return 0;
}

static const int tas5086_sample_rates[] = {
	32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000
};

static const int tas5086_ratios[] = {
	64, 128, 192, 256, 384, 512
};

static int index_in_array(const int *array, int len, int needle)
{
	int i;

	for (i = 0; i < len; i++)
		if (array[i] == needle)
			return i;

	return -ENOENT;
}

static int tas5086_hw_params(struct snd_pcm_substream *substream,
			     struct snd_pcm_hw_params *params,
			     struct snd_soc_dai *dai)
{
	struct snd_soc_component *component = dai->component;
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
	int val;
	int ret;

	priv->rate = params_rate(params);

	/* Look up the sample rate and refer to the offset in the list */
	val = index_in_array(tas5086_sample_rates,
			     ARRAY_SIZE(tas5086_sample_rates), priv->rate);

	if (val < 0) {
		dev_err(component->dev, "Invalid sample rate\n");
		return -EINVAL;
	}

	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
				 TAS5086_CLOCK_RATE_MASK,
				 TAS5086_CLOCK_RATE(val));
	if (ret < 0)
		return ret;

	/* MCLK / Fs ratio */
	val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios),
			     priv->mclk / priv->rate);
	if (val < 0) {
		dev_err(component->dev, "Invalid MCLK / Fs ratio\n");
		return -EINVAL;
	}

	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
				 TAS5086_CLOCK_RATIO_MASK,
				 TAS5086_CLOCK_RATIO(val));
	if (ret < 0)
		return ret;


	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
				 TAS5086_CLOCK_SCLK_RATIO_48,
				 (priv->sclk == 48 * priv->rate) ? 
					TAS5086_CLOCK_SCLK_RATIO_48 : 0);
	if (ret < 0)
		return ret;

	/*
	 * The chip has a very unituitive register mapping and muxes information
	 * about data format and sample depth into the same register, but not on
	 * a logical bit-boundary. Hence, we have to refer to the format passed
	 * in the set_dai_fmt() callback and set up everything from here.
	 *
	 * First, determine the 'base' value, using the format ...
	 */
	switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) {
	case SND_SOC_DAIFMT_RIGHT_J:
		val = 0x00;
		break;
	case SND_SOC_DAIFMT_I2S:
		val = 0x03;
		break;
	case SND_SOC_DAIFMT_LEFT_J:
		val = 0x06;
		break;
	default:
		dev_err(component->dev, "Invalid DAI format\n");
		return -EINVAL;
	}

	/* ... then add the offset for the sample bit depth. */
	switch (params_width(params)) {
        case 16:
		val += 0;
                break;
	case 20:
		val += 1;
		break;
	case 24:
		val += 2;
		break;
	default:
		dev_err(component->dev, "Invalid bit width\n");
		return -EINVAL;
	}

	ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val);
	if (ret < 0)
		return ret;

	/* clock is considered valid now */
	ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL,
				 TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID);
	if (ret < 0)
		return ret;

	return tas5086_set_deemph(component);
}

static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
{
	struct snd_soc_component *component = dai->component;
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
	unsigned int val = 0;

	if (mute)
		val = TAS5086_SOFT_MUTE_ALL;

	return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val);
}

static void tas5086_reset(struct tas5086_private *priv)
{
	if (gpio_is_valid(priv->gpio_nreset)) {
		/* Reset codec - minimum assertion time is 400ns */
		gpio_direction_output(priv->gpio_nreset, 0);
		udelay(1);
		gpio_set_value(priv->gpio_nreset, 1);

		/* Codec needs ~15ms to wake up */
		msleep(15);
	}
}

/* charge period values in microseconds */
static const int tas5086_charge_period[] = {
	  13000,  16900,   23400,   31200,   41600,   54600,   72800,   96200,
	 130000, 156000,  234000,  312000,  416000,  546000,  728000,  962000,
	1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000,
};

static int tas5086_init(struct device *dev, struct tas5086_private *priv)
{
	int ret, i;

	/*
	 * If any of the channels is configured to start in Mid-Z mode,
	 * configure 'part 1' of the PWM starts to use Mid-Z, and tell
	 * all configured mid-z channels to start start under 'part 1'.
	 */
	if (priv->pwm_start_mid_z)
		regmap_write(priv->regmap, TAS5086_PWM_START,
			     TAS5086_PWM_START_MIDZ_FOR_START_1 |
				priv->pwm_start_mid_z);

	/* lookup and set split-capacitor charge period */
	if (priv->charge_period == 0) {
		regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0);
	} else {
		i = index_in_array(tas5086_charge_period,
				   ARRAY_SIZE(tas5086_charge_period),
				   priv->charge_period);
		if (i >= 0)
			regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE,
				     i + 0x08);
		else
			dev_warn(dev,
				 "Invalid split-cap charge period of %d ns.\n",
				 priv->charge_period);
	}

	/* enable factory trim */
	ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00);
	if (ret < 0)
		return ret;

	/* start all channels */
	ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20);
	if (ret < 0)
		return ret;

	/* mute all channels for now */
	ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE,
			   TAS5086_SOFT_MUTE_ALL);
	if (ret < 0)
		return ret;

	return 0;
}

/* TAS5086 controls */
static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1);

static const struct snd_kcontrol_new tas5086_controls[] = {
	SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL,
		       0, 0xff, 1, tas5086_dac_tlv),
	SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume",
			 TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1),
			 0, 0xff, 1, tas5086_dac_tlv),
	SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume",
			 TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3),
			 0, 0xff, 1, tas5086_dac_tlv),
	SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume",
			 TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5),
			 0, 0xff, 1, tas5086_dac_tlv),
	SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0,
			    tas5086_get_deemph, tas5086_put_deemph),
};

/* Input mux controls */
static const char *tas5086_dapm_sdin_texts[] =
{
	"SDIN1-L", "SDIN1-R", "SDIN2-L", "SDIN2-R",
	"SDIN3-L", "SDIN3-R", "Ground (0)", "nc"
};

static const struct soc_enum tas5086_dapm_input_mux_enum[] = {
	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 20, 8, tas5086_dapm_sdin_texts),
	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 16, 8, tas5086_dapm_sdin_texts),
	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 12, 8, tas5086_dapm_sdin_texts),
	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 8,  8, tas5086_dapm_sdin_texts),
	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 4,  8, tas5086_dapm_sdin_texts),
	SOC_ENUM_SINGLE(TAS5086_INPUT_MUX, 0,  8, tas5086_dapm_sdin_texts),
};

static const struct snd_kcontrol_new tas5086_dapm_input_mux_controls[] = {
	SOC_DAPM_ENUM("Channel 1 input", tas5086_dapm_input_mux_enum[0]),
	SOC_DAPM_ENUM("Channel 2 input", tas5086_dapm_input_mux_enum[1]),
	SOC_DAPM_ENUM("Channel 3 input", tas5086_dapm_input_mux_enum[2]),
	SOC_DAPM_ENUM("Channel 4 input", tas5086_dapm_input_mux_enum[3]),
	SOC_DAPM_ENUM("Channel 5 input", tas5086_dapm_input_mux_enum[4]),
	SOC_DAPM_ENUM("Channel 6 input", tas5086_dapm_input_mux_enum[5]),
};

/* Output mux controls */
static const char *tas5086_dapm_channel_texts[] =
	{ "Channel 1 Mux", "Channel 2 Mux", "Channel 3 Mux",
	  "Channel 4 Mux", "Channel 5 Mux", "Channel 6 Mux" };

static const struct soc_enum tas5086_dapm_output_mux_enum[] = {
	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 20, 6, tas5086_dapm_channel_texts),
	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 16, 6, tas5086_dapm_channel_texts),
	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 12, 6, tas5086_dapm_channel_texts),
	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 8,  6, tas5086_dapm_channel_texts),
	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 4,  6, tas5086_dapm_channel_texts),
	SOC_ENUM_SINGLE(TAS5086_PWM_OUTPUT_MUX, 0,  6, tas5086_dapm_channel_texts),
};

static const struct snd_kcontrol_new tas5086_dapm_output_mux_controls[] = {
	SOC_DAPM_ENUM("PWM1 Output", tas5086_dapm_output_mux_enum[0]),
	SOC_DAPM_ENUM("PWM2 Output", tas5086_dapm_output_mux_enum[1]),
	SOC_DAPM_ENUM("PWM3 Output", tas5086_dapm_output_mux_enum[2]),
	SOC_DAPM_ENUM("PWM4 Output", tas5086_dapm_output_mux_enum[3]),
	SOC_DAPM_ENUM("PWM5 Output", tas5086_dapm_output_mux_enum[4]),
	SOC_DAPM_ENUM("PWM6 Output", tas5086_dapm_output_mux_enum[5]),
};

static const struct snd_soc_dapm_widget tas5086_dapm_widgets[] = {
	SND_SOC_DAPM_INPUT("SDIN1-L"),
	SND_SOC_DAPM_INPUT("SDIN1-R"),
	SND_SOC_DAPM_INPUT("SDIN2-L"),
	SND_SOC_DAPM_INPUT("SDIN2-R"),
	SND_SOC_DAPM_INPUT("SDIN3-L"),
	SND_SOC_DAPM_INPUT("SDIN3-R"),
	SND_SOC_DAPM_INPUT("SDIN4-L"),
	SND_SOC_DAPM_INPUT("SDIN4-R"),

	SND_SOC_DAPM_OUTPUT("PWM1"),
	SND_SOC_DAPM_OUTPUT("PWM2"),
	SND_SOC_DAPM_OUTPUT("PWM3"),
	SND_SOC_DAPM_OUTPUT("PWM4"),
	SND_SOC_DAPM_OUTPUT("PWM5"),
	SND_SOC_DAPM_OUTPUT("PWM6"),

	SND_SOC_DAPM_MUX("Channel 1 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_input_mux_controls[0]),
	SND_SOC_DAPM_MUX("Channel 2 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_input_mux_controls[1]),
	SND_SOC_DAPM_MUX("Channel 3 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_input_mux_controls[2]),
	SND_SOC_DAPM_MUX("Channel 4 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_input_mux_controls[3]),
	SND_SOC_DAPM_MUX("Channel 5 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_input_mux_controls[4]),
	SND_SOC_DAPM_MUX("Channel 6 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_input_mux_controls[5]),

	SND_SOC_DAPM_MUX("PWM1 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_output_mux_controls[0]),
	SND_SOC_DAPM_MUX("PWM2 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_output_mux_controls[1]),
	SND_SOC_DAPM_MUX("PWM3 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_output_mux_controls[2]),
	SND_SOC_DAPM_MUX("PWM4 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_output_mux_controls[3]),
	SND_SOC_DAPM_MUX("PWM5 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_output_mux_controls[4]),
	SND_SOC_DAPM_MUX("PWM6 Mux", SND_SOC_NOPM, 0, 0,
			 &tas5086_dapm_output_mux_controls[5]),
};

static const struct snd_soc_dapm_route tas5086_dapm_routes[] = {
	/* SDIN inputs -> channel muxes */
	{ "Channel 1 Mux", "SDIN1-L", "SDIN1-L" },
	{ "Channel 1 Mux", "SDIN1-R", "SDIN1-R" },
	{ "Channel 1 Mux", "SDIN2-L", "SDIN2-L" },
	{ "Channel 1 Mux", "SDIN2-R", "SDIN2-R" },
	{ "Channel 1 Mux", "SDIN3-L", "SDIN3-L" },
	{ "Channel 1 Mux", "SDIN3-R", "SDIN3-R" },

	{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
	{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
	{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
	{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
	{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
	{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },

	{ "Channel 2 Mux", "SDIN1-L", "SDIN1-L" },
	{ "Channel 2 Mux", "SDIN1-R", "SDIN1-R" },
	{ "Channel 2 Mux", "SDIN2-L", "SDIN2-L" },
	{ "Channel 2 Mux", "SDIN2-R", "SDIN2-R" },
	{ "Channel 2 Mux", "SDIN3-L", "SDIN3-L" },
	{ "Channel 2 Mux", "SDIN3-R", "SDIN3-R" },

	{ "Channel 3 Mux", "SDIN1-L", "SDIN1-L" },
	{ "Channel 3 Mux", "SDIN1-R", "SDIN1-R" },
	{ "Channel 3 Mux", "SDIN2-L", "SDIN2-L" },
	{ "Channel 3 Mux", "SDIN2-R", "SDIN2-R" },
	{ "Channel 3 Mux", "SDIN3-L", "SDIN3-L" },
	{ "Channel 3 Mux", "SDIN3-R", "SDIN3-R" },

	{ "Channel 4 Mux", "SDIN1-L", "SDIN1-L" },
	{ "Channel 4 Mux", "SDIN1-R", "SDIN1-R" },
	{ "Channel 4 Mux", "SDIN2-L", "SDIN2-L" },
	{ "Channel 4 Mux", "SDIN2-R", "SDIN2-R" },
	{ "Channel 4 Mux", "SDIN3-L", "SDIN3-L" },
	{ "Channel 4 Mux", "SDIN3-R", "SDIN3-R" },

	{ "Channel 5 Mux", "SDIN1-L", "SDIN1-L" },
	{ "Channel 5 Mux", "SDIN1-R", "SDIN1-R" },
	{ "Channel 5 Mux", "SDIN2-L", "SDIN2-L" },
	{ "Channel 5 Mux", "SDIN2-R", "SDIN2-R" },
	{ "Channel 5 Mux", "SDIN3-L", "SDIN3-L" },
	{ "Channel 5 Mux", "SDIN3-R", "SDIN3-R" },

	{ "Channel 6 Mux", "SDIN1-L", "SDIN1-L" },
	{ "Channel 6 Mux", "SDIN1-R", "SDIN1-R" },
	{ "Channel 6 Mux", "SDIN2-L", "SDIN2-L" },
	{ "Channel 6 Mux", "SDIN2-R", "SDIN2-R" },
	{ "Channel 6 Mux", "SDIN3-L", "SDIN3-L" },
	{ "Channel 6 Mux", "SDIN3-R", "SDIN3-R" },

	/* Channel muxes -> PWM muxes */
	{ "PWM1 Mux", "Channel 1 Mux", "Channel 1 Mux" },
	{ "PWM2 Mux", "Channel 1 Mux", "Channel 1 Mux" },
	{ "PWM3 Mux", "Channel 1 Mux", "Channel 1 Mux" },
	{ "PWM4 Mux", "Channel 1 Mux", "Channel 1 Mux" },
	{ "PWM5 Mux", "Channel 1 Mux", "Channel 1 Mux" },
	{ "PWM6 Mux", "Channel 1 Mux", "Channel 1 Mux" },

	{ "PWM1 Mux", "Channel 2 Mux", "Channel 2 Mux" },
	{ "PWM2 Mux", "Channel 2 Mux", "Channel 2 Mux" },
	{ "PWM3 Mux", "Channel 2 Mux", "Channel 2 Mux" },
	{ "PWM4 Mux", "Channel 2 Mux", "Channel 2 Mux" },
	{ "PWM5 Mux", "Channel 2 Mux", "Channel 2 Mux" },
	{ "PWM6 Mux", "Channel 2 Mux", "Channel 2 Mux" },

	{ "PWM1 Mux", "Channel 3 Mux", "Channel 3 Mux" },
	{ "PWM2 Mux", "Channel 3 Mux", "Channel 3 Mux" },
	{ "PWM3 Mux", "Channel 3 Mux", "Channel 3 Mux" },
	{ "PWM4 Mux", "Channel 3 Mux", "Channel 3 Mux" },
	{ "PWM5 Mux", "Channel 3 Mux", "Channel 3 Mux" },
	{ "PWM6 Mux", "Channel 3 Mux", "Channel 3 Mux" },

	{ "PWM1 Mux", "Channel 4 Mux", "Channel 4 Mux" },
	{ "PWM2 Mux", "Channel 4 Mux", "Channel 4 Mux" },
	{ "PWM3 Mux", "Channel 4 Mux", "Channel 4 Mux" },
	{ "PWM4 Mux", "Channel 4 Mux", "Channel 4 Mux" },
	{ "PWM5 Mux", "Channel 4 Mux", "Channel 4 Mux" },
	{ "PWM6 Mux", "Channel 4 Mux", "Channel 4 Mux" },

	{ "PWM1 Mux", "Channel 5 Mux", "Channel 5 Mux" },
	{ "PWM2 Mux", "Channel 5 Mux", "Channel 5 Mux" },
	{ "PWM3 Mux", "Channel 5 Mux", "Channel 5 Mux" },
	{ "PWM4 Mux", "Channel 5 Mux", "Channel 5 Mux" },
	{ "PWM5 Mux", "Channel 5 Mux", "Channel 5 Mux" },
	{ "PWM6 Mux", "Channel 5 Mux", "Channel 5 Mux" },

	{ "PWM1 Mux", "Channel 6 Mux", "Channel 6 Mux" },
	{ "PWM2 Mux", "Channel 6 Mux", "Channel 6 Mux" },
	{ "PWM3 Mux", "Channel 6 Mux", "Channel 6 Mux" },
	{ "PWM4 Mux", "Channel 6 Mux", "Channel 6 Mux" },
	{ "PWM5 Mux", "Channel 6 Mux", "Channel 6 Mux" },
	{ "PWM6 Mux", "Channel 6 Mux", "Channel 6 Mux" },

	/* The PWM muxes are directly connected to the PWM outputs */
	{ "PWM1", NULL, "PWM1 Mux" },
	{ "PWM2", NULL, "PWM2 Mux" },
	{ "PWM3", NULL, "PWM3 Mux" },
	{ "PWM4", NULL, "PWM4 Mux" },
	{ "PWM5", NULL, "PWM5 Mux" },
	{ "PWM6", NULL, "PWM6 Mux" },

};

static const struct snd_soc_dai_ops tas5086_dai_ops = {
	.hw_params	= tas5086_hw_params,
	.set_sysclk	= tas5086_set_dai_sysclk,
	.set_fmt	= tas5086_set_dai_fmt,
	.mute_stream	= tas5086_mute_stream,
};

static struct snd_soc_dai_driver tas5086_dai = {
	.name = "tas5086-hifi",
	.playback = {
		.stream_name	= "Playback",
		.channels_min	= 2,
		.channels_max	= 6,
		.rates		= TAS5086_PCM_RATES,
		.formats	= TAS5086_PCM_FORMATS,
	},
	.ops = &tas5086_dai_ops,
};

#ifdef CONFIG_PM
static int tas5086_soc_suspend(struct snd_soc_component *component)
{
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
	int ret;

	/* Shut down all channels */
	ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x60);
	if (ret < 0)
		return ret;

	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);

	return 0;
}

static int tas5086_soc_resume(struct snd_soc_component *component)
{
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
	int ret;

	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
	if (ret < 0)
		return ret;

	tas5086_reset(priv);
	regcache_mark_dirty(priv->regmap);

	ret = tas5086_init(component->dev, priv);
	if (ret < 0)
		return ret;

	ret = regcache_sync(priv->regmap);
	if (ret < 0)
		return ret;

	return 0;
}
#else
#define tas5086_soc_suspend	NULL
#define tas5086_soc_resume	NULL
#endif /* CONFIG_PM */

#ifdef CONFIG_OF
static const struct of_device_id tas5086_dt_ids[] = {
	{ .compatible = "ti,tas5086", },
	{ }
};
MODULE_DEVICE_TABLE(of, tas5086_dt_ids);
#endif

static int tas5086_probe(struct snd_soc_component *component)
{
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);
	int i, ret;

	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
	if (ret < 0) {
		dev_err(component->dev, "Failed to enable regulators: %d\n", ret);
		return ret;
	}

	priv->pwm_start_mid_z = 0;
	priv->charge_period = 1300000; /* hardware default is 1300 ms */

	if (of_match_device(of_match_ptr(tas5086_dt_ids), component->dev)) {
		struct device_node *of_node = component->dev->of_node;

		of_property_read_u32(of_node, "ti,charge-period",
				     &priv->charge_period);

		for (i = 0; i < 6; i++) {
			char name[25];

			snprintf(name, sizeof(name),
				 "ti,mid-z-channel-%d", i + 1);

			if (of_get_property(of_node, name, NULL) != NULL)
				priv->pwm_start_mid_z |= 1 << i;
		}
	}

	tas5086_reset(priv);
	ret = tas5086_init(component->dev, priv);
	if (ret < 0)
		goto exit_disable_regulators;

	/* set master volume to 0 dB */
	ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30);
	if (ret < 0)
		goto exit_disable_regulators;

	return 0;

exit_disable_regulators:
	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);

	return ret;
}

static void tas5086_remove(struct snd_soc_component *component)
{
	struct tas5086_private *priv = snd_soc_component_get_drvdata(component);

	if (gpio_is_valid(priv->gpio_nreset))
		/* Set codec to the reset state */
		gpio_set_value(priv->gpio_nreset, 0);

	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
};

static const struct snd_soc_component_driver soc_component_dev_tas5086 = {
	.probe			= tas5086_probe,
	.remove			= tas5086_remove,
	.suspend		= tas5086_soc_suspend,
	.resume			= tas5086_soc_resume,
	.controls		= tas5086_controls,
	.num_controls		= ARRAY_SIZE(tas5086_controls),
	.dapm_widgets		= tas5086_dapm_widgets,
	.num_dapm_widgets	= ARRAY_SIZE(tas5086_dapm_widgets),
	.dapm_routes		= tas5086_dapm_routes,
	.num_dapm_routes	= ARRAY_SIZE(tas5086_dapm_routes),
	.idle_bias_on		= 1,
	.use_pmdown_time	= 1,
	.endianness		= 1,
	.non_legacy_dai_naming	= 1,
};

static const struct i2c_device_id tas5086_i2c_id[] = {
	{ "tas5086", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id);

static const struct regmap_config tas5086_regmap = {
	.reg_bits		= 8,
	.val_bits		= 32,
	.max_register		= TAS5086_MAX_REGISTER,
	.reg_defaults		= tas5086_reg_defaults,
	.num_reg_defaults	= ARRAY_SIZE(tas5086_reg_defaults),
	.cache_type		= REGCACHE_RBTREE,
	.volatile_reg		= tas5086_volatile_reg,
	.writeable_reg		= tas5086_writeable_reg,
	.readable_reg		= tas5086_accessible_reg,
	.reg_read		= tas5086_reg_read,
	.reg_write		= tas5086_reg_write,
};

static int tas5086_i2c_probe(struct i2c_client *i2c,
			     const struct i2c_device_id *id)
{
	struct tas5086_private *priv;
	struct device *dev = &i2c->dev;
	int gpio_nreset = -EINVAL;
	int i, ret;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
		priv->supplies[i].supply = supply_names[i];

	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
				      priv->supplies);
	if (ret < 0) {
		dev_err(dev, "Failed to get regulators: %d\n", ret);
		return ret;
	}

	priv->regmap = devm_regmap_init(dev, NULL, i2c, &tas5086_regmap);
	if (IS_ERR(priv->regmap)) {
		ret = PTR_ERR(priv->regmap);
		dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
		return ret;
	}

	i2c_set_clientdata(i2c, priv);

	if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) {
		struct device_node *of_node = dev->of_node;
		gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0);
	}

	if (gpio_is_valid(gpio_nreset))
		if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset"))
			gpio_nreset = -EINVAL;

	priv->gpio_nreset = gpio_nreset;

	ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
	if (ret < 0) {
		dev_err(dev, "Failed to enable regulators: %d\n", ret);
		return ret;
	}

	tas5086_reset(priv);

	/* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */
	ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i);
	if (ret == 0 && i != 0x3) {
		dev_err(dev,
			"Failed to identify TAS5086 codec (got %02x)\n", i);
		ret = -ENODEV;
	}

	/*
	 * The chip has been identified, so we can turn off the power
	 * again until the dai link is set up.
	 */
	regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);

	if (ret == 0)
		ret = devm_snd_soc_register_component(&i2c->dev,
					     &soc_component_dev_tas5086,
					     &tas5086_dai, 1);

	return ret;
}

static int tas5086_i2c_remove(struct i2c_client *i2c)
{
	return 0;
}

static struct i2c_driver tas5086_i2c_driver = {
	.driver = {
		.name	= "tas5086",
		.of_match_table = of_match_ptr(tas5086_dt_ids),
	},
	.id_table	= tas5086_i2c_id,
	.probe		= tas5086_i2c_probe,
	.remove		= tas5086_i2c_remove,
};

module_i2c_driver(tas5086_i2c_driver);

MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>");
MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver");
MODULE_LICENSE("GPL");