/* $NetBSD: pax.h,v 1.31 2012/08/09 08:09:21 christos Exp $ */
/*-
* Copyright (c) 1992 Keith Muller.
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Keith Muller of the University of California, San Diego.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)pax.h 8.2 (Berkeley) 4/18/94
*/
#if ! HAVE_NBTOOL_CONFIG_H
#define HAVE_LUTIMES 1
#define HAVE_STRUCT_STAT_ST_FLAGS 1
#endif
/*
* BSD PAX global data structures and constants.
*/
#define MAXBLK 32256 /* MAX blocksize supported (posix SPEC) */
/* WARNING: increasing MAXBLK past 32256 */
/* will violate posix spec. */
#define BLKMULT 512 /* blocksize must be even mult of 512 bytes */
/* Don't even think of changing this */
#define DEVBLK 8192 /* default read blksize for devices */
#define FILEBLK 10240 /* default read blksize for files */
#define PAXPATHLEN 3072 /* maximum path length for pax. MUST be */
/* longer than the system MAXPATHLEN */
/*
* Pax modes of operation
*/
#define ERROR -1 /* nothing selected */
#define LIST 0 /* List the file in an archive */
#define EXTRACT 1 /* extract the files in an archive */
#define ARCHIVE 2 /* write a new archive */
#define APPND 3 /* append to the end of an archive */
#define COPY 4 /* copy files to destination dir */
/*
* Device type of the current archive volume
*/
#define ISREG 0 /* regular file */
#define ISCHR 1 /* character device */
#define ISBLK 2 /* block device */
#define ISTAPE 3 /* tape drive */
#define ISPIPE 4 /* pipe/socket */
#ifdef SUPPORT_RMT
#define ISRMT 5 /* rmt */
#endif
/*
* Pattern matching structure
*
* Used to store command line patterns
*/
typedef struct pattern {
char *pstr; /* pattern to match, user supplied */
char *pend; /* end of a prefix match */
char *chdname; /* the dir to change to if not NULL. */
int plen; /* length of pstr */
int flgs; /* processing/state flags */
#define MTCH 0x1 /* pattern has been matched */
#define DIR_MTCH 0x2 /* pattern matched a directory */
#define NOGLOB_MTCH 0x4 /* non-globbing match */
struct pattern *fow; /* next pattern */
} PATTERN;
/*
* General Archive Structure (used internal to pax)
*
* This structure is used to pass information about archive members between
* the format independent routines and the format specific routines. When
* new archive formats are added, they must accept requests and supply info
* encoded in a structure of this type. The name fields are declared statically
* here, as there is only ONE of these floating around, size is not a major
* consideration. Eventually converting the name fields to a dynamic length
* may be required if and when the supporting operating system removes all
* restrictions on the length of pathnames it will resolve.
*/
typedef struct {
int nlen; /* file name length */
char name[PAXPATHLEN+1]; /* file name */
int ln_nlen; /* link name length */
char ln_name[PAXPATHLEN+1]; /* name to link to (if any) */
char *org_name; /* orig name in file system */
char fts_name[PAXPATHLEN+1]; /* name from fts (for *org_name) */
char *tmp_name; /* tmp name used to restore */
PATTERN *pat; /* ptr to pattern match (if any) */
struct stat sb; /* stat buffer see stat(2) */
off_t pad; /* bytes of padding after file xfer */
off_t skip; /* bytes of real data after header */
/* IMPORTANT. The st_size field does */
/* not always indicate the amount of */
/* data following the header. */
u_long crc; /* file crc */
int type; /* type of file node */
#define PAX_DIR 1 /* directory */
#define PAX_CHR 2 /* character device */
#define PAX_BLK 3 /* block device */
#define PAX_REG 4 /* regular file */
#define PAX_SLK 5 /* symbolic link */
#define PAX_SCK 6 /* socket */
#define PAX_FIF 7 /* fifo */
#define PAX_HLK 8 /* hard link */
#define PAX_HRG 9 /* hard link to a regular file */
#define PAX_CTG 10 /* high performance file */
#define PAX_GLL 11 /* GNU long symlink */
#define PAX_GLF 12 /* GNU long file */
} ARCHD;
/*
* Format Specific Routine Table
*
* The format specific routine table allows new archive formats to be quickly
* added. Overall pax operation is independent of the actual format used to
* form the archive. Only those routines which deal directly with the archive
* are tailored to the oddities of the specific format. All other routines are
* independent of the archive format. Data flow in and out of the format
* dependent routines pass pointers to ARCHD structure (described below).
*/
typedef struct {
const char *name; /* name of format, this is the name the user */
/* gives to -x option to select it. */
int bsz; /* default block size. used when the user */
/* does not specify a blocksize for writing */
/* Appends continue to with the blocksize */
/* the archive is currently using.*/
int hsz; /* Header size in bytes. this is the size of */
/* the smallest header this format supports. */
/* Headers are assumed to fit in a BLKMULT. */
/* If they are bigger, get_head() and */
/* get_arc() must be adjusted */
int udev; /* does append require unique dev/ino? some */
/* formats use the device and inode fields */
/* to specify hard links. when members in */
/* the archive have the same inode/dev they */
/* are assumed to be hard links. During */
/* append we may have to generate unique ids */
/* to avoid creating incorrect hard links */
int hlk; /* does archive store hard links info? if */
/* not, we do not bother to look for them */
/* during archive write operations */
int blkalgn; /* writes must be aligned to blkalgn boundary */
int inhead; /* is the trailer encoded in a valid header? */
/* if not, trailers are assumed to be found */
/* in invalid headers (i.e like tar) */
int (*id)(char *, int); /* checks if a buffer is a valid header */
/* returns 1 if it is, o.w. returns a 0 */
int (*st_rd)(void); /* initialize routine for read. so format */
/* can set up tables etc before it starts */
/* reading an archive */
int (*rd) /* read header routine. passed a pointer to */
(ARCHD *, char *); /* ARCHD. It must extract the info */
/* from the format and store it in the ARCHD */
/* struct. This routine is expected to fill */
/* all the fields in the ARCHD (including */
/* stat buf). 0 is returned when a valid */
/* header is found. -1 when not valid. This */
/* routine set the skip and pad fields so the */
/* format independent routines know the */
/* amount of padding and the number of bytes */
/* of data which follow the header. This info */
/* is used to skip to the next file header */
off_t (*end_rd)(void); /* read cleanup. Allows format to clean up */
/* and MUST RETURN THE LENGTH OF THE TRAILER */
/* RECORD (so append knows how many bytes */
/* to move back to rewrite the trailer) */
int (*st_wr)(void); /* initialize routine for write operations */
int (*wr)(ARCHD *); /* write archive header. Passed an ARCHD */
/* filled with the specs on the next file to */
/* archived. Returns a 1 if no file data is */
/* is to be stored; 0 if file data is to be */
/* added. A -1 is returned if a write */
/* operation to the archive failed. this */
/* function sets the skip and pad fields so */
/* the proper padding can be added after */
/* file data. This routine must NEVER write */
/* a flawed archive header. */
int (*end_wr)(void); /* end write. write the trailer and do any */
/* other format specific functions needed */
/* at the end of an archive write */
int (*trail) /* returns 0 if a valid trailer, -1 if not */
(char *, int, int *); /* For formats which encode the */
/* trailer outside of a valid header, a */
/* return value of 1 indicates that the block */
/* passed to it can never contain a valid */
/* header (skip this block, no point in */
/* looking at it) */
int (*subtrail) /* read/process file data from the archive */
(ARCHD *); /* this function is called for trailers */
/* inside headers. */
int (*rd_data) /* read/process file data from the archive */
(ARCHD *, int, off_t *);
int (*wr_data) /* write/process file data to the archive */
(ARCHD *, int, off_t *);
int (*options)(void); /* process format specific options (-o) */
} FSUB;
/*
* Format Specific Options List
*
* Used to pass format options to the format options handler
*/
typedef struct oplist {
char *name; /* option variable name e.g. name= */
char *value; /* value for option variable */
struct oplist *fow; /* next option */
} OPLIST;
/*
* General Macros
*/
#ifndef MIN
#define MIN(a,b) (((a)<(b))?(a):(b))
#endif
#ifdef HOSTPROG
# include "pack_dev.h" /* explicitly use NetBSD's macros */
# define MAJOR(x) major_netbsd(x)
# define MINOR(x) minor_netbsd(x)
# define TODEV(x, y) makedev_netbsd((x), (y))
#else
# define MAJOR(x) major(x)
# define MINOR(x) minor(x)
# define TODEV(x, y) makedev((x), (y))
#endif
/*
* General Defines
*/
#define HEX 16
#define OCT 8
#define _PAX_ 1
/*
* Pathname base component of the temporary file template, to be created in
* ${TMPDIR} or, as a fall-back, _PATH_TMP.
*/
#define _TFILE_BASE "paxXXXXXXXXXX"
/*
* Macros to manipulate off_t as uintmax_t
*/
#define OFFT_F "%" PRIuMAX
#define OFFT_FP(x) "%" x PRIuMAX
#define OFFT_T uintmax_t
#define ASC_OFFT(x,y,z) asc_umax(x,y,z)
#define OFFT_ASC(w,x,y,z) umax_asc((uintmax_t)w,x,y,z)
#define OFFT_OCT(w,x,y,z) umax_oct((uintmax_t)w,x,y,z)
#define STRTOOFFT(x,y,z) strtoimax(x,y,z)
#define OFFT_MAX INTMAX_MAX
#define TOP_HALF 0xffffffff00000000ULL
#define BOTTOM_HALF 0x00000000ffffffffULL