# traditional Chinese translation for gettext.
# Copyright (C) 1998, 2001, 2002, 2005 Free Software Foundation, Inc.
# Pofeng Lee <pofeng@linux.org.tw>, 2001-2002.
# Yuan-Chung Cheng <platin@ms.ccafps.khc.edu.tw>, 1998.
# Abel Cheung <abelcheung@gmail.com>, 2002, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: gettext-tools 0.14.5\n"
"Report-Msgid-Bugs-To: bug-gnu-gettext@gnu.org\n"
"POT-Creation-Date: 2006-10-23 23:07+0200\n"
"PO-Revision-Date: 2005-12-06 08:31+0800\n"
"Last-Translator: Abel Cheung <abelcheung@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#: gnulib-lib/argmatch.c:135
#, c-format
msgid "invalid argument %s for %s"
msgstr "%2$s 的參數 %1$s 無效"
#: gnulib-lib/argmatch.c:136
#, c-format
msgid "ambiguous argument %s for %s"
msgstr "%2$s 的參數 %1$s 不明確"
#: gnulib-lib/argmatch.c:155
#, c-format
msgid "Valid arguments are:"
msgstr "有效的參數為："
#: gnulib-lib/clean-temp.c:322
#, c-format
msgid "cannot find a temporary directory, try setting $TMPDIR"
msgstr "找不到暫存檔目錄，正嘗試設定 $TMPDIR"
#: gnulib-lib/clean-temp.c:336
#, c-format
msgid "cannot create a temporary directory using template \"%s\""
msgstr "無法根據目錄名稱樣式 “%s” 建立暫存檔目錄"
#: gnulib-lib/clean-temp.c:432
#, fuzzy, c-format
msgid "cannot remove temporary file %s"
msgstr "無法產生輸出檔 “%s”"
#: gnulib-lib/clean-temp.c:447
#, fuzzy, c-format
msgid "cannot remove temporary directory %s"
msgstr "無法根據目錄名稱樣式 “%s” 建立暫存檔目錄"
#: gnulib-lib/closeout.c:67
msgid "write error"
msgstr "寫入時發生錯誤"
# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format
#: gnulib-lib/copy-file.c:60 src/file-list.c:56 src/msggrep.c:246
#: src/open-catalog.c:122 src/read-mo.c:248 src/read-tcl.c:126
#: src/urlget.c:198 src/xgettext.c:1759 src/xgettext.c:1772
#: src/xgettext.c:1782
#, c-format
msgid "error while opening \"%s\" for reading"
msgstr "當開啟檔案 “%s” 準備讀取時發生錯誤"
#: gnulib-lib/copy-file.c:67
#, c-format
msgid "cannot open backup file \"%s\" for writing"
msgstr "無法開啟備份檔 “%s” 來寫入內容"
#: gnulib-lib/copy-file.c:75 src/urlget.c:210
#, c-format
msgid "error reading \"%s\""
msgstr "讀取 “%s” 時發生錯誤"
#: gnulib-lib/copy-file.c:80 gnulib-lib/copy-file.c:84
#, c-format
msgid "error writing \"%s\""
msgstr "寫入 “%s” 時發生錯誤"
#: gnulib-lib/copy-file.c:86 src/urlget.c:220
#, c-format
msgid "error after reading \"%s\""
msgstr "完成讀取 “%s” 後發生錯誤"
#: gnulib-lib/csharpcomp.c:280 gnulib-lib/javaversion.c:78 src/msginit.c:838
#: src/msginit.c:906 src/msginit.c:1065 src/msginit.c:1148
#: src/read-csharp.c:74 src/read-java.c:72 src/read-resources.c:75
#: src/read-tcl.c:112 src/write-resources.c:79
#, c-format
msgid "fdopen() failed"
msgstr "fdopen() 失敗"
#: gnulib-lib/csharpcomp.c:539
#, c-format
msgid "C# compiler not found, try installing pnet"
msgstr "找不到 C# 編譯器，請安裝 pnet"
#: gnulib-lib/csharpexec.c:344
#, c-format
msgid "C# virtual machine not found, try installing pnet"
msgstr "找不到 C# virtual machine，請安裝 pnet"
#: gnulib-lib/error.c:125
msgid "Unknown system error"
msgstr "系統出現不明錯誤"
#: gnulib-lib/execute.c:181 gnulib-lib/execute.c:257 gnulib-lib/execute.c:299
#: gnulib-lib/pipe.c:226 gnulib-lib/pipe.c:344 gnulib-lib/pipe.c:404
#: gnulib-lib/wait-process.c:334 gnulib-lib/wait-process.c:401
#, c-format
msgid "%s subprocess failed"
msgstr "%s 副進程發生錯誤"
#: gnulib-lib/getopt.c:531 gnulib-lib/getopt.c:547
#, c-format
msgid "%s: option `%s' is ambiguous\n"
msgstr "%s：選項 ‘%s’ 不明確\n"
#: gnulib-lib/getopt.c:580 gnulib-lib/getopt.c:584
#, c-format
msgid "%s: option `--%s' doesn't allow an argument\n"
msgstr "%s：選項 ‘--%s’ 不可配合參數使用\n"
#: gnulib-lib/getopt.c:593 gnulib-lib/getopt.c:598
#, c-format
msgid "%s: option `%c%s' doesn't allow an argument\n"
msgstr "%s：選項 ‘%c%s’ 不可配合參數使用\n"
#: gnulib-lib/getopt.c:641 gnulib-lib/getopt.c:660 gnulib-lib/getopt.c:976
#: gnulib-lib/getopt.c:995
#, c-format
msgid "%s: option `%s' requires an argument\n"
msgstr "%s：選項 ‘%s’ 需要參數\n"
#: gnulib-lib/getopt.c:698 gnulib-lib/getopt.c:701
#, c-format
msgid "%s: unrecognized option `--%s'\n"
msgstr "%s：無法辨識 ‘--%s’ 選項\n"
#: gnulib-lib/getopt.c:709 gnulib-lib/getopt.c:712
#, c-format
msgid "%s: unrecognized option `%c%s'\n"
msgstr "%s：無法辨識 ‘%c%s’ 選項\n"
#: gnulib-lib/getopt.c:764 gnulib-lib/getopt.c:767
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s：選項不合法 -- %c\n"
#: gnulib-lib/getopt.c:773 gnulib-lib/getopt.c:776
#, c-format
msgid "%s: invalid option -- %c\n"
msgstr "%s：選項無效 -- %c\n"
#: gnulib-lib/getopt.c:828 gnulib-lib/getopt.c:844 gnulib-lib/getopt.c:1048
#: gnulib-lib/getopt.c:1066
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s：選項需要參數 -- %c\n"
#: gnulib-lib/getopt.c:897 gnulib-lib/getopt.c:913
#, c-format
msgid "%s: option `-W %s' is ambiguous\n"
msgstr "%s：選項 ‘-W %s’ 不明確\n"
#: gnulib-lib/getopt.c:937 gnulib-lib/getopt.c:955
#, c-format
msgid "%s: option `-W %s' doesn't allow an argument\n"
msgstr "%s：選項 ‘-W %s’ 不可配合參數使用\n"
#: gnulib-lib/javacomp.c:123 gnulib-lib/javacomp.c:137
#: gnulib-lib/javacomp.c:153
#, c-format
msgid "invalid source_version argument to compile_java_class"
msgstr ""
#: gnulib-lib/javacomp.c:168 gnulib-lib/javacomp.c:189
#, c-format
msgid "invalid target_version argument to compile_java_class"
msgstr ""
#: gnulib-lib/javacomp.c:473 src/write-csharp.c:721 src/write-java.c:996
#: src/write-java.c:1008
#, c-format
msgid "failed to create \"%s\""
msgstr "無法建立 “%s”"
#: gnulib-lib/javacomp.c:480 src/write-catalog.c:215 src/write-csharp.c:730
#: src/write-java.c:1017 src/write-mo.c:819 src/write-qt.c:752
#: src/write-tcl.c:223
#, c-format
msgid "error while writing \"%s\" file"
msgstr "當寫入檔案 “%s” 時發生錯誤"
#: gnulib-lib/javacomp.c:1795
#, c-format
msgid "Java compiler not found, try installing gcj or set $JAVAC"
msgstr "找不到 Java 編譯器，請安裝 gcj 或是設定 $JAVAC 環境變數"
#: gnulib-lib/javaexec.c:418
#, c-format
msgid "Java virtual machine not found, try installing gij or set $JAVA"
msgstr "找不到 Java virtual machine，請安裝 gij 或是設定 $JAVA 環境變數"
#: gnulib-lib/javaversion.c:86 src/msginit.c:846 src/msginit.c:914
#: src/msginit.c:1073
#, c-format
msgid "%s subprocess I/O error"
msgstr "%s 副進程輸出/輸入錯誤"
#: gnulib-lib/obstack.c:424 gnulib-lib/obstack.c:426 gnulib-lib/xmalloc.c:39
#: gnulib-lib/xsetenv.c:38 src/msgl-check.c:453 src/po-lex.c:86
#: src/po-lex.c:105 src/x-glade.c:406 libgettextpo/gettext-po.c:1240
#, c-format
msgid "memory exhausted"
msgstr "記憶體耗盡"
#: gnulib-lib/pipe.c:152 gnulib-lib/pipe.c:155 gnulib-lib/pipe.c:259
#: gnulib-lib/pipe.c:262
#, c-format
msgid "cannot create pipe"
msgstr "無法建立管線"
#. TRANSLATORS:
#. Get translations for open and closing quotation marks.
#.
#. The message catalog should translate "`" to a left
#. quotation mark suitable for the locale, and similarly for
#. "'". If the catalog has no translation,
#. locale_quoting_style quotes `like this', and
#. clocale_quoting_style quotes "like this".
#.
#. For example, an American English Unicode locale should
#. translate "`" to U+201C (LEFT DOUBLE QUOTATION MARK), and
#. should translate "'" to U+201D (RIGHT DOUBLE QUOTATION
#. MARK). A British English Unicode locale should instead
#. translate these to U+2018 (LEFT SINGLE QUOTATION MARK) and
#. U+2019 (RIGHT SINGLE QUOTATION MARK), respectively.
#.
#. If you don't know what to put here, please see
#. <http://en.wikipedia.org/wiki/Quotation_mark#Glyphs>
#. and use glyphs suitable for your language.
#: gnulib-lib/quotearg.c:245
msgid "`"
msgstr ""
#: gnulib-lib/quotearg.c:246
msgid "'"
msgstr ""
#: gnulib-lib/w32spawn.h:48
#, c-format
msgid "DuplicateHandle failed with error code 0x%08x"
msgstr "DuplicateHandle 失敗，錯誤碼為 0x%08x"
#: gnulib-lib/w32spawn.h:53
#, c-format
msgid "_open_osfhandle failed"
msgstr "_open_osfhandle 失敗"
#: gnulib-lib/wait-process.c:277 gnulib-lib/wait-process.c:309
#: gnulib-lib/wait-process.c:367
#, c-format
msgid "%s subprocess"
msgstr "%s 副進程"
#: gnulib-lib/wait-process.c:326 gnulib-lib/wait-process.c:393
#, c-format
msgid "%s subprocess got fatal signal %d"
msgstr "%s 副進程出現代表嚴重錯誤的訊號 %d"
#: src/format.c:149
#, c-format
msgid "'%s' is not a valid %s format string, unlike 'msgid'. Reason: %s"
msgstr "和 ‘msgid’ 不同，‘%s’ 的 %s 格式字串無效。原因：%s"
#: src/format-awk.c:489 src/format-boost.c:589 src/format-elisp.c:337
#: src/format-gcc-internal.c:582 src/format-librep.c:301
#: src/format-pascal.c:390 src/format-perl.c:567 src/format-php.c:337
#: src/format-qt.c:132 src/format-tcl.c:376 src/format-ycp.c:133
#, c-format
msgid ""
"a format specification for argument %u, as in '%s', doesn't exist in 'msgid'"
msgstr "‘%2$s’ 中第 %1$u 個參數的規格在 ‘msgid’ 中並不存在"
#: src/format-awk.c:499 src/format-boost.c:599 src/format-elisp.c:347
#: src/format-gcc-internal.c:592 src/format-librep.c:311
#: src/format-pascal.c:400 src/format-perl.c:577 src/format-php.c:347
#: src/format-qt.c:131 src/format-tcl.c:386 src/format-ycp.c:132
#, c-format
msgid "a format specification for argument %u doesn't exist in '%s'"
msgstr "第 %u 個參數的規格在‘%s’中並不存在"
#: src/format-awk.c:519 src/format-boost.c:619 src/format-c.c:873
#: src/format-elisp.c:367 src/format-gcc-internal.c:612
#: src/format-librep.c:331 src/format-pascal.c:420 src/format-perl.c:597
#: src/format-php.c:367 src/format-python.c:494 src/format-tcl.c:406
#, c-format
msgid ""
"format specifications in 'msgid' and '%s' for argument %u are not the same"
msgstr "‘msgid’和‘%s’的第 %u 個參數的規格並不相同"
#: src/format-boost.c:427
#, fuzzy, c-format
msgid "The directive number %u starts with | but does not end with |."
msgstr "第 %u 個參數結束的不是 ‘}’，而是不合法的字元。"
#: src/format-c.c:177
#, c-format
msgid ""
"In the directive number %u, the token after '<' is not the name of a format "
"specifier macro. The valid macro names are listed in ISO C 99 section 7.8.1."
msgstr ""
"在第 %u 個參數，‘<’ 之後的關鍵字不是正確的變數規格。如果想獲知正確的變數規格"
"名稱，請參考 ISO C 99 規格第 7.8.1 節。"
#: src/format-c.c:565
#, c-format
msgid "In the directive number %u, the token after '<' is not followed by '>'."
msgstr "在第 %u 個參數，‘<’ 之後的關鍵字後面缺少了 ‘>’。"
#: src/format-c.c:779
#, c-format
msgid "The string refers to argument number %u but ignores argument number %u."
msgstr "字串中有提及第 %u 個參數，但忽略了第 %u 個。"
#: src/format-c.c:864 src/format-csharp.c:195 src/format-python.c:485
#, c-format
msgid "number of format specifications in 'msgid' and '%s' does not match"
msgstr "‘msgid’ 和 ‘%s’ 的參數數目不符"
#: src/format-csharp.c:86 src/format-java.c:203
#, c-format
msgid "In the directive number %u, '{' is not followed by an argument number."
msgstr ""
#: src/format-csharp.c:106
#, c-format
msgid "In the directive number %u, ',' is not followed by a number."
msgstr "在第 %u 個參數，‘,’ 後面的不是數字。"
#: src/format-csharp.c:125 src/format-java.c:190
msgid ""
"The string ends in the middle of a directive: found '{' without matching '}'."
msgstr ""
#: src/format-csharp.c:133
#, c-format
msgid ""
"The directive number %u ends with an invalid character '%c' instead of '}'."
msgstr "第 %u 個參數結束的字元是 ‘%c’ 而不是 ‘}’。"
#: src/format-csharp.c:134
#, c-format
msgid "The directive number %u ends with an invalid character instead of '}'."
msgstr "第 %u 個參數結束的不是 ‘}’，而是不合法的字元。"
#: src/format-csharp.c:152 src/format-java.c:333
msgid ""
"The string starts in the middle of a directive: found '}' without matching "
"'{'."
msgstr ""
#: src/format-csharp.c:153
#, c-format
msgid "The string contains a lone '}' after directive number %u."
msgstr "第 %u 個參數後出現單獨的 ‘}’。"
#: src/format-gcc-internal.c:245
#, fuzzy, c-format
msgid "In the directive number %u, the flags combination is invalid."
msgstr "第 %u 個參數的子字串 “%s” 是無效的數字格式。"
#: src/format-gcc-internal.c:276 src/format-gcc-internal.c:370
#, fuzzy, c-format
msgid "In the directive number %u, a precision is not allowed before '%c'."
msgstr "第 %u 個參數的 “%s” 後面缺少了逗號。"
#: src/format-gcc-internal.c:314
#, fuzzy, c-format
msgid ""
"In the directive number %u, the argument number for the precision must be "
"equal to %u."
msgstr "第 %u 個參數中的數字 0 不是正整數。"
#: src/format-gcc-internal.c:376
#, fuzzy, c-format
msgid "In the directive number %u, the precision specification is invalid."
msgstr "第 %u 個參數的子字串 “%s” 是無效的數字格式。"
#: src/format-gcc-internal.c:424
#, c-format
msgid "In the directive number %u, flags are not allowed before '%c'."
msgstr ""
#: src/format-gcc-internal.c:630
#, c-format
msgid "'msgid' uses %%m but '%s' doesn't"
msgstr "‘msgid’ 使用了 %%m 但 ‘%s’ 沒有。"
#: src/format-gcc-internal.c:633
#, c-format
msgid "'msgid' does not use %%m but '%s' uses %%m"
msgstr "‘msgid’ 沒有使用 %%m 但 ‘%s’ 有使用 %%m。"
#: src/format-invalid.h:23
msgid "The string ends in the middle of a directive."
msgstr "在參數中間，字串突然結束"
#: src/format-invalid.h:26
msgid ""
"The string refers to arguments both through absolute argument numbers and "
"through unnumbered argument specifications."
msgstr "字串中同時出現了有硬性規定和沒有硬性規定位置的參數"
#: src/format-invalid.h:29
#, c-format
msgid ""
"In the directive number %u, the argument number 0 is not a positive integer."
msgstr "第 %u 個參數中的數字 0 不是正整數。"
#: src/format-invalid.h:31
#, c-format
msgid ""
"In the directive number %u, the width's argument number 0 is not a positive "
"integer."
msgstr ""
#: src/format-invalid.h:33
#, c-format
msgid ""
"In the directive number %u, the precision's argument number 0 is not a "
"positive integer."
msgstr ""
#: src/format-invalid.h:37
#, c-format
msgid ""
"In the directive number %u, the character '%c' is not a valid conversion "
"specifier."
msgstr "第 %u 個參數的 ‘%c’ 字元屬於無效的列印格式。"
#: src/format-invalid.h:38
#, c-format
msgid ""
"The character that terminates the directive number %u is not a valid "
"conversion specifier."
msgstr "用來結束第 %u 個參數的字元屬於無效的列印格式。"
#: src/format-invalid.h:41
#, c-format
msgid "The string refers to argument number %u in incompatible ways."
msgstr "字串採用了不相容的方法來表示第 %u 個參數。"
#: src/format-java.c:237
#, c-format
msgid ""
"In the directive number %u, the substring \"%s\" is not a valid date/time "
"style."
msgstr "第 %u 個參數的子字串 “%s” 是無效的日期/時間格式。"
#: src/format-java.c:247 src/format-java.c:279 src/format-java.c:306
#, c-format
msgid "In the directive number %u, \"%s\" is not followed by a comma."
msgstr "第 %u 個參數的 “%s” 後面缺少了逗號。"
#: src/format-java.c:269
#, c-format
msgid ""
"In the directive number %u, the substring \"%s\" is not a valid number style."
msgstr "第 %u 個參數的子字串 “%s” 是無效的數字格式。"
#: src/format-java.c:314
#, c-format
msgid ""
"In the directive number %u, the argument number is not followed by a comma "
"and one of \"%s\", \"%s\", \"%s\", \"%s\"."
msgstr ""
#: src/format-java.c:558
#, c-format
msgid "In the directive number %u, a choice contains no number."
msgstr ""
#: src/format-java.c:569
#, c-format
msgid ""
"In the directive number %u, a choice contains a number that is not followed "
"by '<', '#' or '%s'."
msgstr ""
#: src/format-java.c:729
#, c-format
msgid ""
"a format specification for argument {%u}, as in '%s', doesn't exist in "
"'msgid'"
msgstr "‘%2$s’ 中的參數 {%1$u} 的格式在 ‘msgid’ 中並不存在"
#: src/format-java.c:739
#, c-format
msgid "a format specification for argument {%u} doesn't exist in '%s'"
msgstr "參數 {%u} 的規格在 ‘%s’ 中並不存在"
#: src/format-java.c:759
#, c-format
msgid ""
"format specifications in 'msgid' and '%s' for argument {%u} are not the same"
msgstr "‘msgid’ 和 ‘%s’ 的參數 {%u} 規格並不相同"
#: src/format-lisp.c:2352 src/format-lisp.c:2364 src/format-scheme.c:2378
#: src/format-scheme.c:2390
#, c-format
msgid ""
"In the directive number %u, parameter %u is of type '%s' but a parameter of "
"type '%s' is expected."
msgstr ""
#: src/format-lisp.c:2387 src/format-scheme.c:2413
#, c-format
msgid ""
"In the directive number %u, too many parameters are given; expected at most %"
"u parameter."
msgid_plural ""
"In the directive number %u, too many parameters are given; expected at most %"
"u parameters."
msgstr[0] ""
msgstr[1] ""
#: src/format-lisp.c:2502 src/format-scheme.c:2505
#, c-format
msgid "In the directive number %u, '%c' is not followed by a digit."
msgstr ""
#: src/format-lisp.c:2700 src/format-scheme.c:2715
#, c-format
msgid "In the directive number %u, the argument %d is negative."
msgstr ""
#: src/format-lisp.c:2762
msgid "The string ends in the middle of a ~/.../ directive."
msgstr ""
#: src/format-lisp.c:2792 src/format-lisp.c:3025 src/format-lisp.c:3131
#: src/format-lisp.c:3180 src/format-lisp.c:3266 src/format-scheme.c:2790
#: src/format-scheme.c:3023 src/format-scheme.c:3129 src/format-scheme.c:3204
#, c-format
msgid "Found '~%c' without matching '~%c'."
msgstr "找到 ‘~%c’ 但沒有 ‘~%c’ 配合。"
#: src/format-lisp.c:2808 src/format-scheme.c:2806
#, c-format
msgid "In the directive number %u, both the @ and the : modifiers are given."
msgstr ""
#: src/format-lisp.c:2906 src/format-scheme.c:2904
#, c-format
msgid ""
"In the directive number %u, '~:[' is not followed by two clauses, separated "
"by '~;'."
msgstr ""
#: src/format-lisp.c:3214 src/format-scheme.c:3163
#, c-format
msgid "In the directive number %u, '~;' is used in an invalid position."
msgstr ""
#: src/format-lisp.c:3300 src/format-scheme.c:3238
msgid "The string refers to some argument in incompatible ways."
msgstr ""
#: src/format-lisp.c:3342 src/format-scheme.c:3280
#, c-format
msgid "format specifications in 'msgid' and '%s' are not equivalent"
msgstr "‘msgid’ 和 ‘%s’ 的參數規格並非同等"
#: src/format-lisp.c:3358 src/format-scheme.c:3296
#, c-format
msgid "format specifications in '%s' are not a subset of those in 'msgid'"
msgstr "‘%s’ 的參數規格並非 ‘msgid’ 的參數規格的一部份"
#: src/format-perl.c:426
#, c-format
msgid ""
"In the directive number %u, the size specifier is incompatible with the "
"conversion specifier '%c'."
msgstr ""
#: src/format-perl-brace.c:194 src/format-python.c:443 src/format-sh.c:295
#, c-format
msgid "a format specification for argument '%s' doesn't exist in '%s'"
msgstr "參數 ‘%s’ 的規格在 ‘%s’ 中並不存在"
#: src/format-python.c:113
msgid ""
"The string refers to arguments both through argument names and through "
"unnamed argument specifications."
msgstr ""
#: src/format-python.c:327
#, c-format
msgid "The string refers to the argument named '%s' in incompatible ways."
msgstr ""
#: src/format-python.c:403
#, c-format
msgid ""
"format specifications in 'msgid' expect a mapping, those in '%s' expect a "
"tuple"
msgstr ""
"‘msgid’ 裡的規格對應的是雜湊表 (mapping)，而 ‘%s’ 的卻是固定有序列 (tuple)"
#: src/format-python.c:410
#, c-format
msgid ""
"format specifications in 'msgid' expect a tuple, those in '%s' expect a "
"mapping"
msgstr ""
"‘msgid’ 裡的規格對應的是固定有序列 (tuple)，而 ‘%s’ 的卻是雜湊表 (mapping)"
#: src/format-python.c:433 src/format-sh.c:285
#, c-format
msgid ""
"a format specification for argument '%s', as in '%s', doesn't exist in "
"'msgid'"
msgstr "‘%2$s’ 中的參數 ‘%1$s’ 的格式在 ‘msgid’ 中並不存在"
#: src/format-python.c:463
#, c-format
msgid ""
"format specifications in 'msgid' and '%s' for argument '%s' are not the same"
msgstr "‘msgid’和‘%s’的參數‘%s’的格式並不相同"
#: src/format-qt.c:78
#, c-format
msgid "Multiple references to %%%c."
msgstr ""
#: src/format-sh.c:80
msgid "The string refers to a shell variable with a non-ASCII name."
msgstr "字串中的 shell 變數名稱含有不屬於 ASCII 的字元。"
#: src/format-sh.c:82
msgid ""
"The string refers to a shell variable with complex shell brace syntax. This "
"syntax is unsupported here due to security reasons."
msgstr ""
"字串中的 shell 變數名稱含有較複雜的括號格式，因安全理由，這種格式不會支援。"
#: src/format-sh.c:84
msgid ""
"The string refers to a shell variable whose value may be different inside "
"shell functions."
msgstr ""
#: src/format-sh.c:86
msgid "The string refers to a shell variable with an empty name."
msgstr "字串中的 shell 變數沒有名稱。"
#: src/format-ycp.c:83
#, c-format
msgid ""
"In the directive number %u, the character '%c' is not a digit between 1 and "
"9."
msgstr "第 %u 個參數的字元‘%c’不是 1 至 9 之間的整數。"
#: src/format-ycp.c:84
#, c-format
msgid ""
"The character that terminates the directive number %u is not a digit between "
"1 and 9."
msgstr "第 %u 個參數最後一個字元不是 1 至 9 之間的整數。"
#: src/hostname.c:180 src/msgattrib.c:327 src/msgcat.c:271 src/msgcmp.c:163
#: src/msgcomm.c:270 src/msgconv.c:225 src/msgen.c:213 src/msgexec.c:180
#: src/msgfilter.c:286 src/msgfmt.c:367 src/msggrep.c:400 src/msginit.c:260
#: src/msgmerge.c:323 src/msgunfmt.c:252 src/msguniq.c:249
#: src/recode-sr-latin.c:112 src/urlget.c:132 src/xgettext.c:517
#, c-format, no-wrap
msgid ""
"Copyright (C) %s Free Software Foundation, Inc.\n"
"This is free software; see the source for copying conditions. There is NO\n"
"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
msgstr ""
"版權所有 (C) %s Free Software Foundation, Inc.\n"
"這是自由軟體；請參考原始碼的版權聲明。本軟體不提供任何保證，甚至不會包括\n"
"可售性或適用於任何特定目的的保證。\n"
#: src/hostname.c:185 src/msgattrib.c:332 src/msgcat.c:276 src/msgcmp.c:168
#: src/msgcomm.c:275 src/msgconv.c:230 src/msgen.c:218 src/msgexec.c:185
#: src/msgfilter.c:291 src/msgfmt.c:372 src/msggrep.c:405 src/msginit.c:265
#: src/msgmerge.c:328 src/msgunfmt.c:257 src/msguniq.c:254 src/urlget.c:137
#: src/xgettext.c:522
#, c-format
msgid "Written by %s.\n"
msgstr "由 %s 編寫。\n"
#. This is a proper name. See the gettext manual, section Names.
#: src/hostname.c:185 src/msgattrib.c:332 src/msgcat.c:276 src/msgconv.c:230
#: src/msgen.c:218 src/msgexec.c:185 src/msgfilter.c:291 src/msggrep.c:405
#: src/msginit.c:265 src/msguniq.c:254 src/recode-sr-latin.c:122
#: src/urlget.c:137
msgid "Bruno Haible"
msgstr ""
#: src/hostname.c:195 src/msginit.c:275 src/recode-sr-latin.c:131
#, c-format
msgid "too many arguments"
msgstr "參數過多"
#: src/hostname.c:208 src/msgattrib.c:392 src/msgcat.c:333 src/msgcmp.c:199
#: src/msgcomm.c:343 src/msgconv.c:287 src/msgen.c:271 src/msgexec.c:237
#: src/msgfilter.c:396 src/msgfmt.c:627 src/msggrep.c:496 src/msginit.c:349
#: src/msgmerge.c:449 src/msgunfmt.c:412 src/msguniq.c:310
#: src/recode-sr-latin.c:144 src/urlget.c:160 src/xgettext.c:738
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr "請執行 ‘%s --help’ 顯示額外資訊。\n"
#: src/hostname.c:212 src/msginit.c:353 src/recode-sr-latin.c:149
#, c-format, no-wrap
msgid "Usage: %s [OPTION]\n"
msgstr "用法：%s [選項]\n"
#: src/hostname.c:216
#, c-format
msgid "Print the machine's hostname.\n"
msgstr "列印主機的名稱。\n"
#: src/hostname.c:219
#, c-format
msgid "Output format:\n"
msgstr "輸出格式：\n"
#: src/hostname.c:221
#, c-format
msgid " -s, --short short host name\n"
msgstr " -s, --short 短的主機名稱\n"
#: src/hostname.c:223
#, c-format
msgid ""
" -f, --fqdn, --long long host name, includes fully qualified "
"domain\n"
" name, and aliases\n"
msgstr ""
" -f, --fqdn, --long 長的主機名稱，包括正式的網域名稱(FQDN)及別名\n"
#: src/hostname.c:226
#, c-format
msgid " -i, --ip-address addresses for the hostname\n"
msgstr " -i, --ip-address 主機的 IP 地址\n"
#: src/hostname.c:229 src/msgattrib.c:498 src/msgcat.c:431 src/msgcmp.c:246
#: src/msgcomm.c:437 src/msgconv.c:363 src/msgen.c:344 src/msgexec.c:279
#: src/msgfilter.c:482 src/msgfmt.c:749 src/msggrep.c:606 src/msginit.c:405
#: src/msgmerge.c:566 src/msgunfmt.c:510 src/msguniq.c:399
#: src/recode-sr-latin.c:162 src/urlget.c:174 src/xgettext.c:888
#, c-format, no-wrap
msgid "Informative output:\n"
msgstr "顯示資訊：\n"
#: src/hostname.c:231 src/msgattrib.c:500 src/msgcat.c:433 src/msgcmp.c:248
#: src/msgcomm.c:439 src/msgconv.c:365 src/msgen.c:346 src/msgexec.c:281
#: src/msgfilter.c:484 src/msgfmt.c:751 src/msggrep.c:608 src/msginit.c:407
#: src/msgmerge.c:568 src/msgunfmt.c:512 src/msguniq.c:401
#: src/recode-sr-latin.c:165 src/urlget.c:176 src/xgettext.c:890
#, c-format, no-wrap
msgid " -h, --help display this help and exit\n"
msgstr " -h, --help 顯示本訊息，然後結束\n"
#: src/hostname.c:233 src/msgattrib.c:502 src/msgcat.c:435 src/msgcmp.c:250
#: src/msgcomm.c:441 src/msgconv.c:367 src/msgen.c:348 src/msgexec.c:283
#: src/msgfilter.c:486 src/msgfmt.c:753 src/msggrep.c:610 src/msginit.c:409
#: src/msgmerge.c:570 src/msgunfmt.c:514 src/msguniq.c:403
#: src/recode-sr-latin.c:168 src/urlget.c:178 src/xgettext.c:892
#, c-format, no-wrap
msgid " -V, --version output version information and exit\n"
msgstr " -V, --version 顯示版本資訊，然後結束\n"
#: src/hostname.c:236 src/msgattrib.c:505 src/msgcat.c:438 src/msgcmp.c:253
#: src/msgcomm.c:444 src/msgconv.c:370 src/msgen.c:351 src/msgexec.c:286
#: src/msgfilter.c:489 src/msgfmt.c:760 src/msggrep.c:613 src/msginit.c:412
#: src/msgmerge.c:577 src/msgunfmt.c:519 src/msguniq.c:406
#: src/recode-sr-latin.c:171 src/urlget.c:181 src/xgettext.c:895
msgid "Report bugs to <bug-gnu-gettext@gnu.org>.\n"
msgstr "請向 <bug-gnu-gettext@gnu.org> 匯報錯誤。\n"
#: src/hostname.c:252 src/hostname.c:258 src/hostname.c:265
#, c-format
msgid "could not get host name"
msgstr "無法取得主機名稱"
#: src/msgattrib.c:347 src/msgconv.c:245 src/msgexec.c:152 src/msgfilter.c:216
#: src/msggrep.c:420 src/msginit.c:198 src/msguniq.c:269
#, c-format
msgid "at most one input file allowed"
msgstr "最多只接受一個輸入檔"
#: src/msgattrib.c:353 src/msgattrib.c:357 src/msgcat.c:286 src/msgcat.c:290
#: src/msgcomm.c:285 src/msgcomm.c:289 src/msgconv.c:251 src/msgconv.c:255
#: src/msgen.c:240 src/msgen.c:244 src/msgfilter.c:306 src/msgfilter.c:310
#: src/msgfmt.c:411 src/msgfmt.c:419 src/msgfmt.c:434 src/msgfmt.c:456
#: src/msggrep.c:426 src/msggrep.c:430 src/msgmerge.c:353 src/msgmerge.c:374
#: src/msgmerge.c:378 src/msgunfmt.c:288 src/msguniq.c:275 src/msguniq.c:279
#: src/xgettext.c:532 src/xgettext.c:536 src/xgettext.c:543
#, c-format
msgid "%s and %s are mutually exclusive"
msgstr "%s 和 %s 兩者是互不相容的"
#: src/msgattrib.c:396 src/msgconv.c:291 src/msggrep.c:500 src/msguniq.c:314
#, c-format
msgid "Usage: %s [OPTION] [INPUTFILE]\n"
msgstr "用法：%s [選項] [輸入檔]\n"
#: src/msgattrib.c:401
#, c-format, no-wrap
msgid ""
"Filters the messages of a translation catalog according to their attributes,\n"
"and manipulates the attributes.\n"
msgstr "根據訊息的屬性過濾翻譯檔裡的條目，並處理這些屬性。\n"
#: src/msgattrib.c:405 src/msgcat.c:354 src/msgcmp.c:217 src/msgcomm.c:363
#: src/msgconv.c:299 src/msgen.c:287 src/msgexec.c:260 src/msgfilter.c:408
#: src/msggrep.c:510 src/msginit.c:363 src/msgmerge.c:470 src/msgunfmt.c:424
#: src/msguniq.c:330
#, c-format
msgid ""
"Mandatory arguments to long options are mandatory for short options too.\n"
msgstr "長選項必須用的參數在使用短選項時也是必須的。\n"
#: src/msgattrib.c:408 src/msgcat.c:357 src/msgcmp.c:220 src/msgcomm.c:366
#: src/msgconv.c:302 src/msgen.c:290 src/msgexec.c:263 src/msgfilter.c:411
#: src/msgfmt.c:645 src/msggrep.c:513 src/msginit.c:366 src/msgmerge.c:473
#: src/msgunfmt.c:438 src/msguniq.c:333 src/xgettext.c:756
#, c-format
msgid "Input file location:\n"
msgstr "輸入檔位置：\n"
#: src/msgattrib.c:410 src/msgconv.c:304 src/msggrep.c:515 src/msguniq.c:335
#, c-format
msgid " INPUTFILE input PO file\n"
msgstr " INPUTFILE 用作輸入的 PO 檔\n"
#: src/msgattrib.c:412 src/msgcat.c:363 src/msgcmp.c:226 src/msgcomm.c:372
#: src/msgconv.c:306 src/msgen.c:294 src/msgexec.c:267 src/msgfilter.c:415
#: src/msgfmt.c:649 src/msggrep.c:517 src/msgmerge.c:479 src/msguniq.c:337
#: src/xgettext.c:762
#, c-format
msgid ""
" -D, --directory=DIRECTORY add DIRECTORY to list for input files search\n"
msgstr " -D, --directory=目錄 搜尋輸入檔時加入指定<目錄>\n"
#: src/msgattrib.c:414 src/msgconv.c:308 src/msgexec.c:269 src/msgfilter.c:417
#: src/msggrep.c:519 src/msgunfmt.c:442 src/msguniq.c:339
#, c-format
msgid "If no input file is given or if it is -, standard input is read.\n"
msgstr "如果沒有指定輸入檔或輸入檔是 ‘-’，則由標準輸入讀取內容。\n"
#: src/msgattrib.c:417 src/msgcat.c:368 src/msgcomm.c:377 src/msgconv.c:311
#: src/msgen.c:299 src/msgfilter.c:420 src/msgfmt.c:669 src/msggrep.c:522
#: src/msginit.c:374 src/msgmerge.c:491 src/msgunfmt.c:478 src/msguniq.c:342
#: src/xgettext.c:767
#, c-format
msgid "Output file location:\n"
msgstr "輸出檔位置：\n"
#: src/msgattrib.c:419 src/msgcat.c:370 src/msgcomm.c:379 src/msgconv.c:313
#: src/msgen.c:301 src/msgfilter.c:422 src/msgfmt.c:671 src/msggrep.c:524
#: src/msgmerge.c:493 src/msgunfmt.c:480 src/msguniq.c:344
#, c-format
msgid " -o, --output-file=FILE write output to specified file\n"
msgstr " -o, --output-file=檔案 將輸出的內容寫入指定<檔案>\n"
#: src/msgattrib.c:421 src/msgcat.c:372 src/msgcomm.c:381 src/msgconv.c:315
#: src/msgen.c:303 src/msgfilter.c:424 src/msggrep.c:526 src/msgmerge.c:495
#: src/msgunfmt.c:482 src/msguniq.c:346
#, c-format
msgid ""
"The results are written to standard output if no output file is specified\n"
"or if it is -.\n"
msgstr "如果沒有指定<輸出檔>或<輸出檔>是 ‘-’，則會在標準輸出顯示結果。\n"
#: src/msgattrib.c:425 src/msgcat.c:376 src/msgcomm.c:385 src/msguniq.c:350
#, c-format
msgid "Message selection:\n"
msgstr "篩選訊息：\n"
#: src/msgattrib.c:427
#, c-format
msgid ""
" --translated keep translated, remove untranslated messages\n"
msgstr " --translated 只保留已翻譯條目，刪除未翻譯條目\n"
#: src/msgattrib.c:429
#, c-format
msgid ""
" --untranslated keep untranslated, remove translated messages\n"
msgstr " --untranslated 只保留未翻譯條目，刪除已翻譯條目\n"
#: src/msgattrib.c:431
#, c-format
msgid " --no-fuzzy remove 'fuzzy' marked messages\n"
msgstr " --no-fuzzy 刪除加上 'fuzzy' 標記的條目\n"
#: src/msgattrib.c:433
#, c-format
msgid " --only-fuzzy keep 'fuzzy' marked messages\n"
msgstr " --only-fuzzy 只保留加上 'fuzzy' 標記的條目\n"
#: src/msgattrib.c:435
#, c-format
msgid " --no-obsolete remove obsolete #~ messages\n"
msgstr " --no-obsolete 刪除過時的條目 (#~)\n"
#: src/msgattrib.c:437
#, c-format
msgid " --only-obsolete keep obsolete #~ messages\n"
msgstr " --only-obsolete 只保留過時的條目 (#~) \n"
#: src/msgattrib.c:440
#, c-format
msgid "Attribute manipulation:\n"
msgstr "處理屬性：\n"
#: src/msgattrib.c:442
#, c-format
msgid " --set-fuzzy set all messages 'fuzzy'\n"
msgstr " --set-fuzzy 將所有條目標記為 'fuzzy'\n"
#: src/msgattrib.c:444
#, c-format
msgid " --clear-fuzzy set all messages non-'fuzzy'\n"
msgstr " --clear-fuzzy 移除所有條目的 'fuzzy' 狀態\n"
#: src/msgattrib.c:446
#, c-format
msgid " --set-obsolete set all messages obsolete\n"
msgstr " --set-obsolete 將所有條目標記為過時\n"
#: src/msgattrib.c:448
#, c-format
msgid " --clear-obsolete set all messages non-obsolete\n"
msgstr " --clear-obsolete 清除所有條目的過時標記\n"
#: src/msgattrib.c:450
#, fuzzy, c-format
msgid ""
" --clear-previous remove the \"previous msgid\" from all "
"messages\n"
msgstr " --clear-fuzzy 移除所有條目的 'fuzzy' 狀態\n"
#: src/msgattrib.c:452
#, c-format
msgid ""
" --only-file=FILE.po manipulate only entries listed in FILE.po\n"
msgstr " --only-file=FILE.po 只處理 FILE.po 裡已經有的條目\n"
#: src/msgattrib.c:454
#, c-format
msgid ""
" --ignore-file=FILE.po manipulate only entries not listed in FILE.po\n"
msgstr " --ignore-file=FILE.po 只處理 FILE.po 裡沒有的條目\n"
#: src/msgattrib.c:456
#, c-format
msgid " --fuzzy synonym for --only-fuzzy --clear-fuzzy\n"
msgstr " --fuzzy 等於 --only-fuzzy --clear-fuzzy\n"
#: src/msgattrib.c:458
#, c-format
msgid ""
" --obsolete synonym for --only-obsolete --clear-obsolete\n"
msgstr " --obsolete 等於 --only-obsolete --clear-obsolete\n"
#: src/msgattrib.c:461 src/msgcat.c:388 src/msgcmp.c:238 src/msgcomm.c:397
#: src/msgconv.c:326 src/msgen.c:307 src/msgexec.c:272 src/msgfilter.c:443
#: src/msgfmt.c:714 src/msggrep.c:569 src/msginit.c:382 src/msgmerge.c:528
#: src/msguniq.c:357
#, c-format
msgid "Input file syntax:\n"
msgstr "輸入檔格式：\n"
#: src/msgattrib.c:463 src/msgconv.c:328 src/msgen.c:309 src/msgexec.c:274
#: src/msgfilter.c:445 src/msggrep.c:571 src/msginit.c:384 src/msguniq.c:359
#, c-format
msgid ""
" -P, --properties-input input file is in Java .properties syntax\n"
msgstr " -P, --properties-input 以 Java .properties 格式處理輸入檔\n"
#: src/msgattrib.c:465 src/msgconv.c:330 src/msgen.c:311 src/msgexec.c:276
#: src/msgfilter.c:447 src/msggrep.c:573 src/msginit.c:386 src/msguniq.c:361
#, c-format
msgid ""
" --stringtable-input input file is in NeXTstep/GNUstep .strings "
"syntax\n"
msgstr ""
" --stringtable-input 以 NeXTstep/GNUstep .strings 格式處理輸入檔\n"
#: src/msgattrib.c:468 src/msgcat.c:396 src/msgcomm.c:405 src/msgconv.c:333
#: src/msgen.c:314 src/msgfilter.c:450 src/msgfmt.c:742 src/msggrep.c:576
#: src/msginit.c:389 src/msgmerge.c:536 src/msgunfmt.c:486 src/msguniq.c:364
#: src/xgettext.c:846
#, c-format
msgid "Output details:\n"
msgstr "輸出內容細節：\n"
#: src/msgattrib.c:470 src/msgcat.c:403 src/msgcomm.c:407 src/msgconv.c:335
#: src/msgen.c:316 src/msgmerge.c:538 src/msgunfmt.c:488 src/msguniq.c:371
#: src/xgettext.c:848
#, c-format
msgid ""
" -e, --no-escape do not use C escapes in output (default)\n"
msgstr ""
" -e, --no-escape 輸出結果不使用 C 轉義控制序列\n"
" (escape sequence)，這是預設運作方式\n"
#: src/msgattrib.c:472 src/msgcat.c:405 src/msgcomm.c:409 src/msgconv.c:337
#: src/msgen.c:318 src/msgfilter.c:454 src/msgmerge.c:540 src/msgunfmt.c:490
#: src/msguniq.c:373 src/xgettext.c:850
#, c-format
msgid ""
" -E, --escape use C escapes in output, no extended chars\n"
msgstr ""
" -E, --escape 在輸出結果中使用 C 轉義控制序列 (escape "
"sequence)\n"
" ，而不使用非 ASCII 字元\n"
#: src/msgattrib.c:474 src/msgcat.c:407 src/msgcomm.c:411 src/msgconv.c:339
#: src/msgen.c:320 src/msgfilter.c:456 src/msggrep.c:582 src/msgmerge.c:542
#: src/msgunfmt.c:492 src/msguniq.c:375 src/xgettext.c:852
#, c-format
msgid " --force-po write PO file even if empty\n"
msgstr " --force-po 就算沒有內容仍產生 PO 檔\n"
#: src/msgattrib.c:476 src/msgcat.c:409 src/msgcomm.c:413 src/msguniq.c:377
#: src/xgettext.c:854
#, c-format
msgid " -i, --indent write the .po file using indented style\n"
msgstr " -i, --indent 寫入的 .po 檔內容會進行縮排\n"
#: src/msgattrib.c:478 src/msgcat.c:411 src/msgcomm.c:415 src/msguniq.c:379
#: src/xgettext.c:856
#, c-format
msgid " --no-location do not write '#: filename:line' lines\n"
msgstr " --no-location 不加入類似 '#: 檔案:行號' 的源代碼位置\n"
#: src/msgattrib.c:480 src/msgcat.c:413 src/msgcomm.c:417 src/msguniq.c:381
#: src/xgettext.c:858
#, c-format
msgid ""
" -n, --add-location generate '#: filename:line' lines (default)\n"
msgstr ""
" -n, --add-location 會加入 '#: 檔案:行號' 格式的源代碼位置 (預設)\n"
#: src/msgattrib.c:482 src/msgcat.c:415 src/msgcomm.c:419 src/msguniq.c:383
#: src/xgettext.c:860
#, c-format
msgid ""
" --strict write out strict Uniforum conforming .po file\n"
msgstr ""
" --strict 產生的 .po 檔內容跟隨嚴格的 Uniforum 格式\n"
#: src/msgattrib.c:484 src/msgcat.c:417 src/msgcomm.c:421 src/msgconv.c:349
#: src/msgen.c:330 src/msgfilter.c:468 src/msggrep.c:592 src/msginit.c:395
#: src/msgmerge.c:552 src/msgunfmt.c:498 src/msguniq.c:385
#, c-format
msgid " -p, --properties-output write out a Java .properties file\n"
msgstr " -p, --properties-output 產生 Java .properties 檔案\n"
#: src/msgattrib.c:486 src/msgcat.c:419 src/msgcomm.c:423 src/msgconv.c:351
#: src/msgen.c:332 src/msgfilter.c:470 src/msggrep.c:594 src/msginit.c:397
#: src/msgmerge.c:554 src/msgunfmt.c:500 src/msguniq.c:387 src/xgettext.c:864
#, c-format
msgid ""
" --stringtable-output write out a NeXTstep/GNUstep .strings file\n"
msgstr " --stringtable-output 產生 NeXTstep/GNUstep .strings 檔案\n"
#: src/msgattrib.c:488 src/msgcat.c:421 src/msgcomm.c:425 src/msgconv.c:353
#: src/msgen.c:334 src/msgfilter.c:472 src/msggrep.c:596 src/msginit.c:399
#: src/msgmerge.c:556 src/msgunfmt.c:502 src/msguniq.c:389 src/xgettext.c:866
#, c-format
msgid " -w, --width=NUMBER set output page width\n"
msgstr " -w, --width=NUMBER 指定輸出檔每行寬度\n"
#: src/msgattrib.c:490 src/msgcat.c:423 src/msgcomm.c:427 src/msgconv.c:355
#: src/msgen.c:336 src/msgfilter.c:474 src/msggrep.c:598 src/msginit.c:401
#: src/msgmerge.c:558 src/msgunfmt.c:504 src/msguniq.c:391 src/xgettext.c:868
#, c-format
msgid ""
" --no-wrap do not break long message lines, longer than\n"
" the output page width, into several lines\n"
msgstr ""
" --no-wrap 即使輸出的訊息超出頁寬，也不將輸出的訊息斷行\n"
#: src/msgattrib.c:493 src/msgcat.c:426 src/msgcomm.c:430 src/msgconv.c:358
#: src/msgen.c:339 src/msgfilter.c:477 src/msgmerge.c:561 src/msgunfmt.c:507
#: src/msguniq.c:394 src/xgettext.c:871
#, c-format
msgid " -s, --sort-output generate sorted output\n"
msgstr " -s, --sort-output 將輸出結果排序\n"
#: src/msgattrib.c:495 src/msgcat.c:428 src/msgcomm.c:432 src/msgconv.c:360
#: src/msgen.c:341 src/msgfilter.c:479 src/msgmerge.c:563 src/msguniq.c:396
#: src/xgettext.c:873
#, c-format
msgid " -F, --sort-by-file sort output by file location\n"
msgstr " -F, --sort-by-file 根據檔案位置排列輸出結果\n"
#: src/msgcat.c:296 src/msgcomm.c:315
#, c-format
msgid "impossible selection criteria specified (%d < n < %d)"
msgstr "不可能出現的選擇條件 (%d < n <%d)"
#: src/msgcat.c:337 src/msgcomm.c:347 src/xgettext.c:742
#, c-format
msgid "Usage: %s [OPTION] [INPUTFILE]...\n"
msgstr "用法：%s [選項] [輸入檔]...\n"
#: src/msgcat.c:342
#, c-format, no-wrap
msgid ""
"Concatenates and merges the specified PO files.\n"
"Find messages which are common to two or more of the specified PO files.\n"
"By using the --more-than option, greater commonality may be requested\n"
"before messages are printed. Conversely, the --less-than option may be\n"
"used to specify less commonality before messages are printed (i.e.\n"
"--less-than=2 will only print the unique messages). Translations,\n"
"comments and extract comments will be cumulated, except that if --use-first\n"
"is specified, they will be taken from the first PO file to define them.\n"
"File positions from all PO files will be cumulated.\n"
msgstr ""
"合併指定的 PO 檔。\n"
"在兩個或多個指定的 PO 檔中找出共同的翻譯訊息。利用 --more-than 選項，可以\n"
"令訊息在不同檔案出現的次數較多才會列印。相反地，--less-than 選項則會令訊息\n"
"在不同檔案出現的次數較少才列印（例如 --less-than=2 表示列印只出現一次的訊\n"
"息）。翻譯內容、自行加上的註解和原程式碼的註解都會累積，除非使用了\n"
"--use-first 選項，那樣則會由第一個含有該翻譯條目的檔案取得資料。\n"
"所有 PO 檔中的翻譯條目的檔案位置都會累積下來。\n"
#: src/msgcat.c:359 src/msgcomm.c:368 src/xgettext.c:758
#, c-format
msgid " INPUTFILE ... input files\n"
msgstr " INPUTFILE ... 輸入檔\n"
#: src/msgcat.c:361 src/msgcomm.c:370 src/xgettext.c:760
#, c-format
msgid " -f, --files-from=FILE get list of input files from FILE\n"
msgstr " -f, --files-from=FILE 由 FILE 讀取所有輸入檔的位置\n"
#: src/msgcat.c:365 src/msgcomm.c:374 src/msgen.c:296 src/msgfmt.c:651
#: src/xgettext.c:764
#, c-format
msgid "If input file is -, standard input is read.\n"
msgstr "如果輸入檔是 - 的話，會由標準輸入讀取資料。\n"
#: src/msgcat.c:378 src/msgcomm.c:387
#, c-format
msgid ""
" -<, --less-than=NUMBER print messages with less than this many\n"
" definitions, defaults to infinite if not set\n"
msgstr ""
" -<, --less-than=NUMBER 當一項條目的不同翻譯少於多少種就會顯示，\n"
" 預設為無限 (即顯示所有條目)\n"
#: src/msgcat.c:381
#, c-format
msgid ""
" ->, --more-than=NUMBER print messages with more than this many\n"
" definitions, defaults to 0 if not set\n"
msgstr ""
" ->, --more-than=NUMBER 當一項條目的不同翻譯多於多少種才會顯示，\n"
" 預設為 0 種 (即顯示所有條目)\n"
#: src/msgcat.c:384 src/msgcomm.c:393
#, c-format
msgid ""
" -u, --unique shorthand for --less-than=2, requests\n"
" that only unique messages be printed\n"
msgstr ""
" -u, --unique 等於 --less-than=2，表示只顯示\n"
" 只有一種翻譯的字句\n"
#: src/msgcat.c:390 src/msgcmp.c:240 src/msgcomm.c:399 src/msgfmt.c:716
#: src/msgmerge.c:530
#, c-format
msgid ""
" -P, --properties-input input files are in Java .properties syntax\n"
msgstr " -P, --properties-input 輸入檔格式為 Java .properties 格式\n"
#: src/msgcat.c:392 src/msgcmp.c:242 src/msgcomm.c:401 src/msgfmt.c:718
#: src/msgmerge.c:532
#, c-format
msgid ""
" --stringtable-input input files are in NeXTstep/GNUstep .strings\n"
" syntax\n"
msgstr ""
" --stringtable-input 輸入檔格式為 NeXTstep/GNUstep .strings 格式\n"
#: src/msgcat.c:398 src/msgconv.c:321 src/msguniq.c:366
#, c-format
msgid " -t, --to-code=NAME encoding for output\n"
msgstr " -t, --to-code=名稱 輸出的編碼\n"
#: src/msgcat.c:400 src/msguniq.c:368
#, c-format
msgid ""
" --use-first use first available translation for each\n"
" message, don't merge several translations\n"
msgstr ""
" --use-first 每句只使用第一個出現的翻譯，而不會將所有\n"
" 翻譯合併起來\n"
#. This is a proper name. See the gettext manual, section Names.
#: src/msgcmp.c:168 src/msgcomm.c:275 src/msgmerge.c:328
msgid "Peter Miller"
msgstr ""
#: src/msgcmp.c:179 src/msgmerge.c:339
#, c-format
msgid "no input files given"
msgstr "未指定輸入檔"
#: src/msgcmp.c:184 src/msgmerge.c:344
#, c-format
msgid "exactly 2 input files required"
msgstr "需要恰好指定兩個輸入檔"
#: src/msgcmp.c:203 src/msgmerge.c:453
#, c-format
msgid "Usage: %s [OPTION] def.po ref.pot\n"
msgstr "用法：%s [選項] def.po ref.pot\n"
#: src/msgcmp.c:208
#, c-format, no-wrap
msgid ""
"Compare two Uniforum style .po files to check that both contain the same\n"
"set of msgid strings. The def.po file is an existing PO file with the\n"
"translations. The ref.pot file is the last created PO file, or a PO Template\n"
"file (generally created by xgettext). This is useful for checking that\n"
"you have translated each and every message in your program. Where an exact\n"
"match cannot be found, fuzzy matching is used to produce better diagnostics.\n"
msgstr ""
"比較兩個 Uniforum 格式的 .po 檔案，檢查兩者是否含有相同的 msgid 欄位。\n"
"def.po 是翻譯過的舊 PO 檔，ref.pot 則是新建立的 PO 檔或是 POT 檔\n"
"(通常由 xgettext 產生)。\n"
"此程式可用來檢查程式中的所有的訊息是否都已經翻譯好了。比較時如果\n"
"有不完全配合的字串出現，程式會以模糊配對的方式得出較好的結果。\n"
#: src/msgcmp.c:222
#, c-format
msgid " def.po translations\n"
msgstr " def.po 翻譯檔\n"
#: src/msgcmp.c:224
#, c-format
msgid " ref.pot references to the sources\n"
msgstr " ref.pot 未翻譯檔案\n"
#: src/msgcmp.c:229 src/msgmerge.c:519
#, c-format
msgid "Operation modifiers:\n"
msgstr "運作模式有關選項：\n"
#: src/msgcmp.c:231 src/msgmerge.c:521
#, c-format
msgid ""
" -m, --multi-domain apply ref.pot to each of the domains in def."
"po\n"
msgstr ""
" -m, --multi-domain 將 ref.pot 套用於 def.po 中的每一個領域\n"
#: src/msgcmp.c:233
#, fuzzy, c-format
msgid " --use-fuzzy consider fuzzy entries\n"
msgstr " -f, --use-fuzzy 在輸出結果中顯示模糊翻譯\n"
#: src/msgcmp.c:235
#, fuzzy, c-format
msgid " --use-untranslated consider untranslated entries\n"
msgstr " --untranslated 只保留未翻譯條目，刪除已翻譯條目\n"
#: src/msgcmp.c:306
#, fuzzy, c-format
msgid "this message is untranslated"
msgstr "警告：沒有使用這個訊息"
#: src/msgcmp.c:312
#, c-format
msgid "this message needs to be reviewed by the translator"
msgstr ""
#: src/msgcmp.c:328 src/msgmerge.c:1214
#, c-format
msgid "this message is used but not defined..."
msgstr "這個訊息有使用過但沒有定義..."
#: src/msgcmp.c:331 src/msgmerge.c:1217
#, c-format
msgid "...but this definition is similar"
msgstr "...但這個定義很相似"
#: src/msgcmp.c:336 src/msgmerge.c:1245
#, c-format
msgid "this message is used but not defined in %s"
msgstr "這個訊息有使用過但在 %s 中沒有定義"
#: src/msgcmp.c:440
#, c-format
msgid "warning: this message is not used"
msgstr "警告：沒有使用這個訊息"
#: src/msgcmp.c:447 src/msgfmt.c:543
#, c-format
msgid "found %d fatal error"
msgid_plural "found %d fatal errors"
msgstr[0] "找到 %d 個嚴重錯誤"
#: src/msgcomm.c:304
#, c-format
msgid "at least two files must be specified"
msgstr "必須指定至少兩個檔案"
#: src/msgcomm.c:352
#, c-format, no-wrap
msgid ""
"Find messages which are common to two or more of the specified PO files.\n"
"By using the --more-than option, greater commonality may be requested\n"
"before messages are printed. Conversely, the --less-than option may be\n"
"used to specify less commonality before messages are printed (i.e.\n"
"--less-than=2 will only print the unique messages). Translations,\n"
"comments and extract comments will be preserved, but only from the first\n"
"PO file to define them. File positions from all PO files will be\n"
"cumulated.\n"
msgstr ""
"在兩個或多個指定的 PO 檔中找出共同的翻譯訊息。利用 --more-than 選項，可以\n"
"令訊息在不同檔案出現的次數較多才會列印。相反地，--less-than 選項則會令訊息\n"
"在不同檔案出現的次數較少才列印（例如 --less-than=2 表示列印只出現一次的\n"
"訊息）。翻譯內容、自行加上的註解和原程式碼的註解都會保留，但只會由第一個\n"
"含有該翻譯條目的檔案取得。所有 PO 檔中的翻譯條目的檔案位置都會累積下來。\n"
#: src/msgcomm.c:390
#, c-format
msgid ""
" ->, --more-than=NUMBER print messages with more than this many\n"
" definitions, defaults to 1 if not set\n"
msgstr ""
" ->, --more-than=NUMBER 顯示出現多於指定次數的字句，預設為 1 次\n"
#: src/msgcomm.c:434 src/xgettext.c:875
#, c-format
msgid ""
" --omit-header don't write header with `msgid \"\"' entry\n"
msgstr " --omit-header 不顯示標頭 (即 ‘msgid \"\"’ 項目)\n"
#: src/msgconv.c:295
#, c-format
msgid "Converts a translation catalog to a different character encoding.\n"
msgstr "將一個翻譯檔的編碼轉換為另一種文字編碼。\n"
#: src/msgconv.c:319
#, c-format
msgid "Conversion target:\n"
msgstr "轉換目標：\n"
#: src/msgconv.c:323
#, c-format
msgid "The default encoding is the current locale's encoding.\n"
msgstr "預設的編碼為目前語言的編碼。\n"
#: src/msgconv.c:341 src/msgen.c:322 src/msgmerge.c:544
#, c-format
msgid " -i, --indent indented output style\n"
msgstr " -i, --indent 將輸出結果進行縮排\n"
#: src/msgconv.c:343 src/msgen.c:324 src/msgfilter.c:462 src/msggrep.c:586
#: src/msgmerge.c:546
#, c-format
msgid " --no-location suppress '#: filename:line' lines\n"
msgstr " --no-location 不輸出源代碼位置\n"
#: src/msgconv.c:345 src/msgen.c:326 src/msgfilter.c:464 src/msggrep.c:588
#: src/msgmerge.c:548
#, c-format
msgid ""
" --add-location preserve '#: filename:line' lines (default)\n"
msgstr " --add-location 保留源代碼位置 (預設)\n"
#: src/msgconv.c:347 src/msgen.c:328 src/msgfilter.c:466 src/msggrep.c:590
#: src/msgmerge.c:550
#, c-format
msgid " --strict strict Uniforum output style\n"
msgstr " --strict 嚴格遵從 Uniforum 格式\n"
#: src/msgen.c:229 src/msgfmt.c:383 src/xgettext.c:560
#, c-format
msgid "no input file given"
msgstr "未指定輸入檔"
#: src/msgen.c:234
#, c-format
msgid "exactly one input file required"
msgstr "需要恰好指定一個輸入檔"
#: src/msgen.c:275
#, c-format
msgid "Usage: %s [OPTION] INPUTFILE\n"
msgstr "用法：%s [選項] 輸入檔\n"
#: src/msgen.c:280
#, c-format, no-wrap
msgid ""
"Creates an English translation catalog. The input file is the last\n"
"created English PO file, or a PO Template file (generally created by\n"
"xgettext). Untranslated entries are assigned a translation that is\n"
"identical to the msgid.\n"
msgstr ""
"產生英文翻譯檔。輸入檔可以是 PO 檔或 POT 檔 (通常由 xgettext 產生)。\n"
"未翻譯的條目會填上和 msgid 一樣的字串。\n"
#: src/msgen.c:292
#, c-format
msgid " INPUTFILE input PO or POT file\n"
msgstr " 輸入檔 作為輸入的 PO 或 POT 檔\n"
#: src/msgexec.c:195
#, c-format
msgid "missing command name"
msgstr "缺少了指令名稱"
#: src/msgexec.c:241
#, c-format
msgid "Usage: %s [OPTION] COMMAND [COMMAND-OPTION]\n"
msgstr "用法：%s [選項] 指令 [指令選項]\n"
#: src/msgexec.c:246
#, c-format, no-wrap
msgid ""
"Applies a command to all translations of a translation catalog.\n"
"The COMMAND can be any program that reads a translation from standard\n"
"input. It is invoked once for each translation. Its output becomes\n"
"msgexec's output. msgexec's return code is the maximum return code\n"
"across all invocations.\n"
msgstr ""
"以翻譯檔的所有翻譯條目內容作為某指令的輸入資料。\n"
"<指令>可以是任何由標準輸入讀入翻譯條目的程式。\n"
"對於每個翻譯條目指令都會執行一次。它的輸出結果\n"
"即是 msgexec 的輸出結果。msgexec 的回傳值是所有\n"
"指令執行的回傳值的最大值。\n"
#: src/msgexec.c:255
#, c-format, no-wrap
msgid ""
"A special builtin command called '0' outputs the translation, followed by a\n"
"null byte. The output of \"msgexec 0\" is suitable as input for \"xargs -0\".\n"
msgstr ""
"有一個稱為 '0' 的特殊內置指令，它會輸出所有翻譯條目，並隨後加上 null 位元。\n"
"“msgexec 0” 的輸出適用於作為 “xargs -0” 的輸入。\n"
#: src/msgexec.c:265 src/msgfilter.c:413
#, c-format
msgid " -i, --input=INPUTFILE input PO file\n"
msgstr " -i, --input=INPUTFILE 作為輸入的 PO 檔\n"
#: src/msgexec.c:325
#, c-format
msgid "write to stdout failed"
msgstr "寫入至標準輸出時發生錯誤"
#: src/msgexec.c:352 src/msgfilter.c:665
#, c-format
msgid "write to %s subprocess failed"
msgstr "寫入至 %s 副進程時發生錯誤"
#: src/msgfilter.c:301
#, c-format
msgid "missing filter name"
msgstr "未指定過濾器"
#: src/msgfilter.c:325
#, c-format
msgid "at least one sed script must be specified"
msgstr "必須指定至少一個 sed script"
#: src/msgfilter.c:400
#, c-format
msgid "Usage: %s [OPTION] FILTER [FILTER-OPTION]\n"
msgstr "用法：%s [選項] 過濾器 [過濾器選項]\n"
#: src/msgfilter.c:404
#, c-format
msgid "Applies a filter to all translations of a translation catalog.\n"
msgstr "對於翻譯檔中的所有翻譯條目進行過濾。\n"
#: src/msgfilter.c:428
#, c-format
msgid ""
"The FILTER can be any program that reads a translation from standard input\n"
"and writes a modified translation to standard output.\n"
msgstr ""
"<過濾器>可以是任何由標準輸入讀入翻譯條目\n"
"並將修改後的翻譯寫進標準輸出的程式。\n"
#: src/msgfilter.c:433
#, c-format
msgid "Useful FILTER-OPTIONs when the FILTER is 'sed':\n"
msgstr "當<過濾器>是 ‘sed’ 時一些比較有用的選項：\n"
#: src/msgfilter.c:435
#, c-format
msgid ""
" -e, --expression=SCRIPT add SCRIPT to the commands to be executed\n"
msgstr ""
#: src/msgfilter.c:437
#, c-format
msgid ""
" -f, --file=SCRIPTFILE add the contents of SCRIPTFILE to the "
"commands\n"
" to be executed\n"
msgstr ""
#: src/msgfilter.c:440
#, c-format
msgid ""
" -n, --quiet, --silent suppress automatic printing of pattern space\n"
msgstr " -n, --quiet, --silent 不會自動顯示過濾後的結果\n"
#: src/msgfilter.c:452 src/msggrep.c:578
#, c-format
msgid ""
" --no-escape do not use C escapes in output (default)\n"
msgstr ""
" --no-escape 輸出結果不使用 C 轉義控制序列\n"
" (escape sequence)，這是預設運作方式\n"
#: src/msgfilter.c:458 src/msggrep.c:584
#, c-format
msgid " --indent indented output style\n"
msgstr " --indent 將輸出結果進行縮排\n"
#: src/msgfilter.c:460
#, c-format
msgid ""
" --keep-header keep header entry unmodified, don't filter it\n"
msgstr " --keep-header 保護標頭內容，過濾內容時不會被更改\n"
#: src/msgfilter.c:588
#, c-format
msgid "Not yet implemented."
msgstr "功能尚未編寫。"
#: src/msgfilter.c:617
#, c-format
msgid "cannot set up nonblocking I/O to %s subprocess"
msgstr "無法和 %s 副進程建立非專用的 I/O"
#: src/msgfilter.c:645
#, c-format
msgid "communication with %s subprocess failed"
msgstr "和 %s 副進程溝通時出現錯誤"
#: src/msgfilter.c:696
#, c-format
msgid "read from %s subprocess failed"
msgstr "由 %s 副進程讀入資料時出現錯誤"
#: src/msgfilter.c:712
#, c-format
msgid "%s subprocess terminated with exit code %d"
msgstr "%s 副進程已終止，錯誤碼為 %d"
#: src/msgfmt.c:305
#, c-format
msgid "the argument to %s should be a single punctuation character"
msgstr "%s 的參數應該是一個標點符號"
#: src/msgfmt.c:352
#, c-format
msgid "invalid endianness: %s"
msgstr ""
#. This is a proper name. See the gettext manual, section Names.
#: src/msgfmt.c:372 src/msgunfmt.c:257 src/xgettext.c:522
msgid "Ulrich Drepper"
msgstr ""
#: src/msgfmt.c:425 src/msgfmt.c:447 src/msgfmt.c:469 src/msgunfmt.c:319
#: src/msgunfmt.c:342
#, c-format
msgid "%s requires a \"-d directory\" specification"
msgstr "%s 需要指定 “-d 目錄” 選項"
#: src/msgfmt.c:440 src/msgfmt.c:462 src/msgunfmt.c:312 src/msgunfmt.c:335
#, c-format
msgid "%s requires a \"-l locale\" specification"
msgstr "%s 需要指定 “-l locale” 選項"
#: src/msgfmt.c:478 src/msgunfmt.c:351 src/msgunfmt.c:357
#, c-format
msgid "%s is only valid with %s or %s"
msgstr "%s 只能配合 %s 或 %s 一起使用才有效"
#: src/msgfmt.c:484 src/msgfmt.c:490
#, c-format
msgid "%s is only valid with %s, %s or %s"
msgstr "%s 只能配合 %s、%s 或 %s 一起使用才有效"
#: src/msgfmt.c:601
#, c-format
msgid "%d translated message"
msgid_plural "%d translated messages"
msgstr[0] "已翻譯 %d 個條目"
#: src/msgfmt.c:606
#, c-format
msgid ", %d fuzzy translation"
msgid_plural ", %d fuzzy translations"
msgstr[0] "，有 %d 個條目標記為模糊翻譯"
#: src/msgfmt.c:611
#, c-format
msgid ", %d untranslated message"
msgid_plural ", %d untranslated messages"
msgstr[0] "，還有 %d 個條目未翻譯"
#: src/msgfmt.c:631
#, c-format
msgid "Usage: %s [OPTION] filename.po ...\n"
msgstr "用法：%s [選項] filename.po ...\n"
#: src/msgfmt.c:635
#, c-format
msgid "Generate binary message catalog from textual translation description.\n"
msgstr "由文字模式翻譯檔產生二元碼翻譯檔。\n"
#: src/msgfmt.c:640 src/xgettext.c:751
#, c-format, no-wrap
msgid ""
"Mandatory arguments to long options are mandatory for short options too.\n"
"Similarly for optional arguments.\n"
msgstr "長選項必要的參數在使用短選項時也是必要的。對於選擇性的參數也一樣。\n"
#: src/msgfmt.c:647
#, c-format
msgid " filename.po ... input files\n"
msgstr " filename.po ... 輸入檔\n"
#: src/msgfmt.c:654 src/msgmerge.c:485 src/msgunfmt.c:427 src/xgettext.c:799
#, c-format
msgid "Operation mode:\n"
msgstr "操作模式：\n"
#: src/msgfmt.c:656
#, c-format
msgid ""
" -j, --java Java mode: generate a Java ResourceBundle "
"class\n"
msgstr ""
" -j, --java Java 模式：產生 Java ResourceBundle class\n"
#: src/msgfmt.c:658
#, c-format
msgid ""
" --java2 like --java, and assume Java2 (JDK 1.2 or "
"higher)\n"
msgstr ""
" --java2 類似 --java，假設格式為 Java2 (JDK 1.2 或以"
"上)\n"
#: src/msgfmt.c:660
#, c-format
msgid " --csharp C# mode: generate a .NET .dll file\n"
msgstr " --csharp C# 模式，會產生 .NET .dll 檔\n"
#: src/msgfmt.c:662
#, c-format
msgid ""
" --csharp-resources C# resources mode: generate a .NET .resources "
"file\n"
msgstr ""
" --csharp-resources C# resources 模式，會產生 .NET .resources 檔"
"案\n"
#: src/msgfmt.c:664
#, c-format
msgid ""
" --tcl Tcl mode: generate a tcl/msgcat .msg file\n"
msgstr " --tcl Tcl 模式：產生 tcl/msgcat .msg 檔\n"
#: src/msgfmt.c:666
#, c-format
msgid " --qt Qt mode: generate a Qt .qm file\n"
msgstr " --qt Qt 模式：產生 Qt .qm 檔\n"
#: src/msgfmt.c:673
#, c-format
msgid " --strict enable strict Uniforum mode\n"
msgstr " --strict 強制使用 Uniforum 格式翻譯檔\n"
#: src/msgfmt.c:675 src/xgettext.c:775
#, c-format
msgid "If output file is -, output is written to standard output.\n"
msgstr "如果輸出檔是 - 的話，則會在標準輸出顯示結果。\n"
#: src/msgfmt.c:678
#, c-format
msgid "Output file location in Java mode:\n"
msgstr "Java 模式的輸出檔位置：\n"
#: src/msgfmt.c:680 src/msgfmt.c:694 src/msgunfmt.c:447 src/msgunfmt.c:458
#, c-format
msgid " -r, --resource=RESOURCE resource name\n"
msgstr " -r, --resource=RESOURCE resource 名稱\n"
#: src/msgfmt.c:682 src/msgfmt.c:696 src/msgfmt.c:706 src/msgunfmt.c:449
#: src/msgunfmt.c:460 src/msgunfmt.c:470
#, c-format
msgid ""
" -l, --locale=LOCALE locale name, either language or "
"language_COUNTRY\n"
msgstr ""
" -l, --locale=LOCALE 指定語言，可以用語言名稱或者 xy_XY 格式的\n"
" 語言代號\n"
#: src/msgfmt.c:684
#, c-format
msgid ""
" -d DIRECTORY base directory of classes directory hierarchy\n"
msgstr " -d 目錄 class 目錄層的基本目錄\n"
#: src/msgfmt.c:686
#, c-format
msgid ""
"The class name is determined by appending the locale name to the resource "
"name,\n"
"separated with an underscore. The -d option is mandatory. The class is\n"
"written under the specified directory.\n"
msgstr ""
"class 名稱是由語言名稱和 resource 名稱合併來決定的，兩者之間會用底線分隔。\n"
"-d 選項是必須的。class 檔會存放在指定的目錄。\n"
#: src/msgfmt.c:692
#, c-format
msgid "Output file location in C# mode:\n"
msgstr "C# 模式的輸出檔位置：\n"
#: src/msgfmt.c:698 src/msgunfmt.c:462
#, c-format
msgid ""
" -d DIRECTORY base directory for locale dependent .dll "
"files\n"
msgstr ""
#: src/msgfmt.c:700
#, c-format
msgid ""
"The -l and -d options are mandatory. The .dll file is written in a\n"
"subdirectory of the specified directory whose name depends on the locale.\n"
msgstr ""
#: src/msgfmt.c:704
#, c-format
msgid "Output file location in Tcl mode:\n"
msgstr "Tcl 模式的輸出檔位置：\n"
#: src/msgfmt.c:708 src/msgunfmt.c:472
#, c-format
msgid " -d DIRECTORY base directory of .msg message catalogs\n"
msgstr ""
#: src/msgfmt.c:710
#, c-format
msgid ""
"The -l and -d options are mandatory. The .msg file is written in the\n"
"specified directory.\n"
msgstr ""
#: src/msgfmt.c:722 src/xgettext.c:791
#, c-format
msgid "Input file interpretation:\n"
msgstr "輸入檔處理：\n"
#: src/msgfmt.c:724
#, c-format
msgid ""
" -c, --check perform all the checks implied by\n"
" --check-format, --check-header, --check-"
"domain\n"
msgstr ""
" -c, --check 進行以下所有的檢查：\n"
" --check-format, --check-header, --check-"
"domain\n"
#: src/msgfmt.c:727
#, c-format
msgid " --check-format check language dependent format strings\n"
msgstr " --check-format 檢查各種程式語言的格式字串\n"
#: src/msgfmt.c:729
#, c-format
msgid ""
" --check-header verify presence and contents of the header "
"entry\n"
msgstr " --check-header 確保標頭欄位存在和內容正確\n"
#: src/msgfmt.c:731
#, c-format
msgid ""
" --check-domain check for conflicts between domain directives\n"
" and the --output-file option\n"
msgstr ""
" --check-domain 檢查 domain 關鍵字和 --output-file 選項之間\n"
" 有沒有衝突\n"
#: src/msgfmt.c:734
#, c-format
msgid ""
" -C, --check-compatibility check that GNU msgfmt behaves like X/Open "
"msgfmt\n"
msgstr ""
" -C, --check-compatibility 確保 GNU msgfmt 運作的方式和 X/Open msgfmt 兼"
"容\n"
#: src/msgfmt.c:736
#, c-format
msgid ""
" --check-accelerators[=CHAR] check presence of keyboard accelerators "
"for\n"
" menu items\n"
msgstr " --check-accelerators[=CHAR] 檢查選單項目中代表捷徑鍵的字元\n"
#: src/msgfmt.c:739
#, c-format
msgid " -f, --use-fuzzy use fuzzy entries in output\n"
msgstr " -f, --use-fuzzy 在輸出結果中顯示模糊翻譯\n"
#: src/msgfmt.c:744
#, c-format
msgid ""
" -a, --alignment=NUMBER align strings to NUMBER bytes (default: %d)\n"
msgstr ""
" -a, --alignment=數字 以<數字>個位元組為單位配置字串位置(預設：%d)\n"
#: src/msgfmt.c:746
#, c-format
msgid ""
" --no-hash binary file will not include the hash table\n"
msgstr ""
" --no-hash 二元碼檔不會包含雜湊表 (hash table) 在內\n"
#: src/msgfmt.c:755
#, c-format
msgid " --statistics print statistics about translations\n"
msgstr " --statistics 顯示有關翻譯訊息的統計\n"
#: src/msgfmt.c:757 src/msgmerge.c:572 src/msgunfmt.c:516
#, c-format
msgid " -v, --verbose increase verbosity level\n"
msgstr " -v, --verbose 顯示詳細資訊\n"
#: src/msgfmt.c:867
#, c-format
msgid "warning: PO file header missing or invalid\n"
msgstr "警告：缺少了 PO 檔的標頭或是格式無效\n"
#: src/msgfmt.c:870
#, c-format
msgid "warning: charset conversion will not work\n"
msgstr "警告：字元集轉換的功能不會生效\n"
#: src/msgfmt.c:880
#, c-format
msgid "warning: PO file header fuzzy\n"
msgstr "警告：PO 檔的標頭仍然是模糊狀態\n"
#: src/msgfmt.c:882
#, c-format
msgid "warning: older versions of msgfmt will give an error on this\n"
msgstr "警告：較舊版本的 msgfmt 遇到此檔案時會印出錯誤訊息\n"
#: src/msgfmt.c:906
#, c-format
msgid "domain name \"%s\" not suitable as file name"
msgstr "領域名稱 “%s” 不適合作為檔案名稱"
#: src/msgfmt.c:911
#, c-format
msgid "domain name \"%s\" not suitable as file name: will use prefix"
msgstr "領域名稱 “%s” 不適合作為檔案名稱：將使用字首"
#: src/msgfmt.c:925
#, c-format
msgid "`domain %s' directive ignored"
msgstr "忽略‘domain %s’指令"
#: src/msgfmt.c:985
#, c-format
msgid "empty `msgstr' entry ignored"
msgstr "忽略空的‘msgstr’欄位"
#: src/msgfmt.c:986
#, c-format
msgid "fuzzy `msgstr' entry ignored"
msgstr "忽略模糊的‘msgstr’欄位"
#: src/msgfmt.c:1035
#, c-format
msgid "%s: warning: source file contains fuzzy translation"
msgstr "%s：警告：原始檔包含模糊翻譯條目"
#: src/msggrep.c:257 src/po-lex.c:660 src/read-mo.c:82
#: src/read-properties.c:85 src/read-stringtable.c:100 src/x-awk.c:139
#: src/x-c.c:414 src/x-csharp.c:159 src/x-elisp.c:145 src/x-glade.c:422
#: src/x-java.c:172 src/x-librep.c:147 src/x-lisp.c:212 src/x-perl.c:226
#: src/x-perl.c:301 src/x-perl.c:394 src/x-php.c:162 src/x-python.c:176
#: src/x-rst.c:232 src/x-scheme.c:171 src/x-sh.c:155 src/x-smalltalk.c:91
#: src/x-tcl.c:150 src/x-ycp.c:91
#, c-format
msgid "error while reading \"%s\""
msgstr "讀取 “%s” 時出現錯誤"
#: src/msggrep.c:485
#, fuzzy, c-format
msgid ""
"option '%c' cannot be used before 'J' or 'K' or 'T' or 'C' or 'X' has been "
"specified"
msgstr "未指定 ‘K’、‘T’ 或 ‘C’ 選項前不能使用選項 ‘%c’"
#: src/msggrep.c:505
#, c-format, no-wrap
msgid ""
"Extracts all messages of a translation catalog that match a given pattern\n"
"or belong to some given source files.\n"
msgstr "抽取翻譯檔中的訊息，而這些訊息符合某種樣式或屬於某個指定的來源檔。\n"
#: src/msggrep.c:531
#, fuzzy, c-format, no-wrap
msgid ""
"Message selection:\n"
" [-N SOURCEFILE]... [-M DOMAINNAME]...\n"
" [-J MSGCTXT-PATTERN] [-K MSGID-PATTERN] [-T MSGSTR-PATTERN]\n"
" [-C COMMENT-PATTERN] [-X EXTRACTED-COMMENT-PATTERN]\n"
"A message is selected if it comes from one of the specified source files,\n"
"or if it comes from one of the specified domains,\n"
"or if -J is given and its context (msgctxt) matches MSGCTXT-PATTERN,\n"
"or if -K is given and its key (msgid or msgid_plural) matches MSGID-PATTERN,\n"
"or if -T is given and its translation (msgstr) matches MSGSTR-PATTERN,\n"
"or if -C is given and the translator's comment matches COMMENT-PATTERN,\n"
"or if -X is given and the extracted comment matches EXTRACTED-COMMENT-PATTERN.\n"
"\n"
"When more than one selection criterion is specified, the set of selected\n"
"messages is the union of the selected messages of each criterion.\n"
"\n"
"MSGCTXT-PATTERN or MSGID-PATTERN or MSGSTR-PATTERN or COMMENT-PATTERN or\n"
"EXTRACTED-COMMENT-PATTERN syntax:\n"
" [-E | -F] [-e PATTERN | -f FILE]...\n"
"PATTERNs are basic regular expressions by default, or extended regular\n"
"expressions if -E is given, or fixed strings if -F is given.\n"
"\n"
" -N, --location=SOURCEFILE select messages extracted from SOURCEFILE\n"
" -M, --domain=DOMAINNAME select messages belonging to domain DOMAINNAME\n"
" -J, --msgctxt start of patterns for the msgctxt\n"
" -K, --msgid start of patterns for the msgid\n"
" -T, --msgstr start of patterns for the msgstr\n"
" -C, --comment start of patterns for the translator's comment\n"
" -X, --extracted-comment start of patterns for the extracted comment\n"
" -E, --extended-regexp PATTERN is an extended regular expression\n"
" -F, --fixed-strings PATTERN is a set of newline-separated strings\n"
" -e, --regexp=PATTERN use PATTERN as a regular expression\n"
" -f, --file=FILE obtain PATTERN from FILE\n"
" -i, --ignore-case ignore case distinctions\n"
" -v, --invert-match output only the messages that do not match any\n"
" selection criterion\n"
msgstr ""
"訊息選擇：\n"
" [-N SOURCEFILE]... [-M DOMAINNAME]...\n"
" [-K MSGID-PATTERN] [-T MSGSTR-PATTERN] [-C COMMENT-PATTERN]\n"
"\n"
"程式會依據以下其中一個標準來選擇翻譯訊息：\n"
"* 指定的原始檔\n"
"* 指定的文字領域\n"
"* 使用了選項 -K，而原文 (msgid or msgid_plural) 符合 MSGID-PATTERN\n"
"* 使用了選項 -T，而翻譯字句 (msgstr) 符合 MSGSTR-PATTERN\n"
"* 使用了選項 -C，而翻譯註解符合 COMMENT-PATTERN\n"
"\n"
"若指定了兩個或以上的選擇標準，訊息最少只要符合其中一個標準就已經足夠。\n"
"\n"
"MSGID-PATTERN 或 MSGSTR-PATTERN 或 COMMENT-PATTERN 的語法：\n"
" [-E | -F] [-e PATTERN | -f FILE]...\n"
"PATTERN 內定是基礎常規運算式 (basic regular expression)，\n"
"如果指定 -E 則是延伸常規運算式 (extended regular expression)，\n"
"如果指定 -F 則是普通字串。\n"
"\n"
" -N, --location=SOURCEFILE 選擇自 SOURCEFILE 抽取出來的翻譯訊息\n"
" -M, --domain=DOMAINNAME 選擇屬於 DOMAINNAME 領域的翻譯訊息\n"
" -K, --msgid 指定符合 msgid 的樣式\n"
" -T, --msgstr 指定符合 msgstr 的樣式\n"
" -C, --comment 指定符合翻譯註釋的樣式\n"
" -E, --extended-regexp 指定 PATTERN 為延伸常規運算式\n"
" -F, --fixed-strings 指定 PATTERN 為普通字串\n"
" -e, --regexp=PATTERN 指定 PATTERN 為基礎常規運算式\n"
" -f, --file=FILE PATTERN 採用 FILE 的內容 \n"
" -i, --ignore-case 不區分大小寫\n"
#: src/msggrep.c:580
#, c-format
msgid ""
" --escape use C escapes in output, no extended chars\n"
msgstr ""
" --escape 在輸出結果中使用 C 轉義控制序列 (escape "
"sequence)\n"
" ，而不使用非 ASCII 字元\n"
#: src/msggrep.c:601
#, c-format
msgid " --sort-output generate sorted output\n"
msgstr " --sort-output 將訊息排序\n"
#: src/msggrep.c:603
#, c-format
msgid " --sort-by-file sort output by file location\n"
msgstr " --sort-by-file 根據檔案位置排序\n"
#: src/msginit.c:288
msgid ""
"You are in a language indifferent environment. Please set\n"
"your LANG environment variable, as described in the ABOUT-NLS\n"
"file. This is necessary so you can test your translations.\n"
msgstr ""
"系統環境沒有任何和語言有關的設定。請根據 ABOUT-NLS 檔案所述，\n"
"設定 LANG 環境變數。這是測試翻譯時的必要步驟。\n"
#: src/msginit.c:312
#, c-format
msgid ""
"Output file %s already exists.\n"
"Please specify the locale through the --locale option or\n"
"the output .po file through the --output-file option.\n"
msgstr ""
"輸出檔 %s 已經存在。\n"
"請透過 --locale 選項指定語系或\n"
"--output-file 選項指定輸出的 .po 檔。\n"
#: src/msginit.c:338
#, c-format
msgid "Created %s.\n"
msgstr "已建立 %s。\n"
#: src/msginit.c:358
#, c-format, no-wrap
msgid ""
"Creates a new PO file, initializing the meta information with values from the\n"
"user's environment.\n"
msgstr "建立新的 PO 檔，並由使用者環境取得初始化所需的檔頭資料。\n"
#: src/msginit.c:368
#, c-format
msgid " -i, --input=INPUTFILE input POT file\n"
msgstr " -i, --input=輸入檔 輸入的 POT 檔\n"
#: src/msginit.c:370
#, c-format
msgid ""
"If no input file is given, the current directory is searched for the POT "
"file.\n"
"If it is -, standard input is read.\n"
msgstr ""
"如果沒有指定輸入檔，會在目前的目錄搜尋 POT 檔。\n"
"如果輸入檔是 -，則讀取標準輸入的內容。\n"
#: src/msginit.c:376
#, c-format
msgid " -o, --output-file=FILE write output to specified PO file\n"
msgstr " -o, --output-file=FILE 將輸出的內容寫入指定的 PO 檔\n"
#: src/msginit.c:378
#, c-format
msgid ""
"If no output file is given, it depends on the --locale option or the user's\n"
"locale setting. If it is -, the results are written to standard output.\n"
msgstr ""
"如果沒有指定輸出檔，檔名將會由 --locale 選項或使用者的語系決定。\n"
"如果輸出檔是 -，則會將結果寫至標準輸出。\n"
#: src/msginit.c:391
#, c-format
msgid " -l, --locale=LL_CC set target locale\n"
msgstr " -l, --locale=LL_CC 指定地區設定\n"
#: src/msginit.c:393
#, c-format
msgid ""
" --no-translator assume the PO file is automatically generated\n"
msgstr " --no-translator 假設 PO 檔是自動產生的\n"
#: src/msginit.c:449
msgid ""
"Found more than one .pot file.\n"
"Please specify the input .pot file through the --input option.\n"
msgstr ""
"找到多於一個的 .pot 檔。\n"
"請透過 --input 選項指定作為輸入檔的 .pot 檔。\n"
#: src/msginit.c:457 src/msginit.c:462
#, c-format
msgid "error reading current directory"
msgstr "讀取目前的目錄時發生錯誤"
#: src/msginit.c:470
msgid ""
"Found no .pot file in the current directory.\n"
"Please specify the input .pot file through the --input option.\n"
msgstr ""
"在目前目錄中找不到任何 .pot 檔。\n"
"請透過 --input 選項指定作為輸入檔的 .pot 檔。\n"
#: src/msginit.c:859 src/msginit.c:927 src/msginit.c:1086 src/msginit.c:1165
#: src/read-csharp.c:84 src/read-java.c:82 src/read-resources.c:85
#: src/read-tcl.c:128 src/write-resources.c:105
#, c-format
msgid "%s subprocess failed with exit code %d"
msgstr "%s 副進程失敗，錯誤碼為 %d"
#: src/msginit.c:1051
msgid ""
"The new message catalog should contain your email address, so that users "
"can\n"
"give you feedback about the translations, and so that maintainers can "
"contact\n"
"you in case of unexpected technical problems.\n"
msgstr ""
"新的翻譯檔應該含有您的電郵地址，這樣使用者就可以對您的翻譯提出意見，\n"
"同時軟件維護者也可以在出現技術問題時聯絡您。\n"
#. TRANSLATORS: "English" needs to be replaced by your language.
#. For example in it.po write "Traduzioni italiani ...",
#. *not* "Traduzioni inglesi ...".
#: src/msginit.c:1438
#, c-format
msgid "English translations for %s package"
msgstr "Traditional Chinese translation for %s"
#: src/msgl-cat.c:179 src/msgl-charset.c:88 src/msgl-iconv.c:226
#, c-format
msgid "present charset \"%s\" is not a portable encoding name"
msgstr "目前的字元集編碼 “%s” 不是通用的編碼名稱"
#: src/msgl-cat.c:190 src/msgl-iconv.c:238
#, c-format
msgid "two different charsets \"%s\" and \"%s\" in input file"
msgstr "輸入檔有兩種不同的字元集編碼 “%s” 和 “%s”"
#: src/msgl-cat.c:205
#, c-format
msgid ""
"input file `%s' doesn't contain a header entry with a charset specification"
msgstr "輸入檔‘%s’的標頭欄位中沒有指定字元集"
#: src/msgl-cat.c:209
#, c-format
msgid ""
"domain \"%s\" in input file `%s' doesn't contain a header entry with a "
"charset specification"
msgstr "輸入檔 ‘%2$s’ 的 domain “%1$s” 的標頭欄位中沒有指定字元集"
#: src/msgl-cat.c:392 src/msgl-iconv.c:343
#, c-format
msgid "target charset \"%s\" is not a portable encoding name."
msgstr "目標的字元集編碼 “%s” 不是通用的編碼名稱。"
#: src/msgl-cat.c:443 src/msgl-cat.c:449 src/msgl-charset.c:94
#: src/msgl-charset.c:129 src/po-xerror.c:123 src/po-xerror.c:148
#: src/xgettext.c:2778
#, c-format
msgid "warning: "
msgstr "警告："
#: src/msgl-cat.c:444
#, c-format
msgid ""
"Input files contain messages in different encodings, UTF-8 among others.\n"
"Converting the output to UTF-8.\n"
msgstr ""
"輸入檔含有不同編碼的訊息，其中一種是 UTF-8。會將輸出的編碼轉換為 UTF-8。\n"
#: src/msgl-cat.c:450
#, c-format
msgid ""
"Input files contain messages in different encodings, %s and %s among "
"others.\n"
"Converting the output to UTF-8.\n"
"To select a different output encoding, use the --to-code option.\n"
msgstr ""
"輸入檔含有不同編碼的訊息，其中包括 %s 和 %s。會將輸出的編碼轉換為 UTF-8。\n"
"若要選擇另一種輸出編碼，請使用 --to-code 選項。\n"
#: src/msgl-cat.c:489
#, c-format
msgid ""
"Conversion of file %s from %s encoding to %s encoding\n"
"changes some msgids or msgctxts.\n"
"Either change all msgids and msgctxts to be pure ASCII, or ensure they are\n"
"UTF-8 encoded from the beginning, i.e. already in your source code files.\n"
msgstr ""
#: src/msgl-charset.c:95
#, c-format
msgid ""
"Locale charset \"%s\" is different from\n"
"input file charset \"%s\".\n"
"Output of '%s' might be incorrect.\n"
"Possible workarounds are:\n"
msgstr ""
"目前語系的字元集“%s”和輸入檔的字元集“%s”不同。\n"
"‘%s’的輸出可能有誤。\n"
"可行的解決方法包括：\n"
#: src/msgl-charset.c:102
#, c-format
msgid "- Set LC_ALL to a locale with encoding %s.\n"
msgstr "- 設定 LC_ALL 環境變數為使用編碼 %s 的語系。\n"
#: src/msgl-charset.c:107
#, c-format
msgid ""
"- Convert the translation catalog to %s using 'msgconv',\n"
" then apply '%s',\n"
" then convert back to %s using 'msgconv'.\n"
msgstr ""
"- 用 ‘msgconv’ 將翻譯檔的字元集轉換為 %s，\n"
" 然後套用 ‘%s’ 指令過濾內容，\n"
" 最後再用 ‘msgconv’ 將翻譯檔的字元集還原為 %s。\n"
#: src/msgl-charset.c:116
#, c-format
msgid ""
"- Set LC_ALL to a locale with encoding %s,\n"
" convert the translation catalog to %s using 'msgconv',\n"
" then apply '%s',\n"
" then convert back to %s using 'msgconv'.\n"
msgstr ""
"- 設定 LC_ALL 環境變數為使用編碼 %s 的語系，\n"
" 用 ‘msgconv’ 將翻譯檔的字元集轉換為 %s，\n"
" 然後套用 ‘%s’ 指令過濾內容，\n"
" 最後再用 ‘msgconv’ 將翻譯檔的字元集還原為 %s。\n"
#: src/msgl-charset.c:130
#, c-format
msgid ""
"Locale charset \"%s\" is not a portable encoding name.\n"
"Output of '%s' might be incorrect.\n"
"A possible workaround is to set LC_ALL=C.\n"
msgstr ""
"語言的字元集編碼 “%s” 不是通用的編碼名稱。\n"
"‘%s’ 的輸出可能有誤。\n"
"設定 LC_ALL=C 是一個可行的解決方法。\n"
#: src/msgl-check.c:92
msgid "plural expression can produce negative values"
msgstr "複數表示式可能產生負數"
#: src/msgl-check.c:102
#, c-format
msgid "nplurals = %lu but plural expression can produce values as large as %lu"
msgstr "nplurals = %lu，但複數表示式的最大值可能等於 %lu"
#: src/msgl-check.c:143
msgid "plural expression can produce division by zero"
msgstr "複數表示式會引致被 0 整除的錯誤"
#: src/msgl-check.c:148
msgid "plural expression can produce integer overflow"
msgstr "複數表示式會引致整數溢位的錯誤"
#: src/msgl-check.c:153
msgid ""
"plural expression can produce arithmetic exceptions, possibly division by "
"zero"
msgstr "複數表示式會引致運算錯誤，例如被 0 整除"
#: src/msgl-check.c:185
#, fuzzy, c-format
msgid "Try using the following, valid for %s:"
msgstr "嘗試使用下列 %s 中屬於合法的型態:\n"
#: src/msgl-check.c:268 src/msgl-check.c:292
#, fuzzy
msgid "message catalog has plural form translations"
msgstr "翻譯檔含有複數型態的翻譯..."
#: src/msgl-check.c:270
#, fuzzy
msgid "but header entry lacks a \"plural=EXPRESSION\" attribute"
msgstr "...但檔頭缺少了像 “plural=表示式” 的項目"
#: src/msgl-check.c:294
#, fuzzy
msgid "but header entry lacks a \"nplurals=INTEGER\" attribute"
msgstr "...但檔頭缺少了像 “nplurals=整數” 的項目"
#: src/msgl-check.c:330
msgid "invalid nplurals value"
msgstr "無效的 nplurals 值"
#: src/msgl-check.c:352
msgid "invalid plural expression"
msgstr "無效的複數表示式"
#: src/msgl-check.c:382 src/msgl-check.c:398
#, fuzzy, c-format
msgid "nplurals = %lu"
msgstr "nplurals = %lu..."
#: src/msgl-check.c:384
#, fuzzy, c-format
msgid "but some messages have only one plural form"
msgid_plural "but some messages have only %lu plural forms"
msgstr[0] "...但某些訊息只有 %lu 種複數型態"
#: src/msgl-check.c:400
#, fuzzy, c-format
msgid "but some messages have one plural form"
msgid_plural "but some messages have %lu plural forms"
msgstr[0] "...但某些訊息有 %lu 種複數型態"
#: src/msgl-check.c:420
msgid ""
"message catalog has plural form translations, but lacks a header entry with "
"\"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\""
msgstr ""
"翻譯檔含有複數型態的翻譯，但缺少了以下的標頭欄位：\n"
"“Plural-Forms: nplurals=<整數>; plural=<表示式>;”"
#: src/msgl-check.c:502
msgid "`msgid' and `msgid_plural' entries do not both begin with '\\n'"
msgstr "`msgid' 和 `msgid_plural' 欄位並非同時以 '\\n' 開始"
#: src/msgl-check.c:510
#, c-format
msgid "`msgid' and `msgstr[%u]' entries do not both begin with '\\n'"
msgstr "‘msgid’和‘msgstr[%u]’欄位並非同時以‘\\n’開始"
#: src/msgl-check.c:525
msgid "`msgid' and `msgstr' entries do not both begin with '\\n'"
msgstr "‘msgid’和‘msgstr’欄位並非同時以‘\\n’開始"
#: src/msgl-check.c:543
msgid "`msgid' and `msgid_plural' entries do not both end with '\\n'"
msgstr "‘msgid’和‘msgid_plural’欄位並非同時以‘\\n’結束"
#: src/msgl-check.c:551
#, c-format
msgid "`msgid' and `msgstr[%u]' entries do not both end with '\\n'"
msgstr "‘msgid’和‘msgstr[%u]’欄位並非同時以‘\\n’結束"
#: src/msgl-check.c:566
msgid "`msgid' and `msgstr' entries do not both end with '\\n'"
msgstr "‘msgid’和‘msgstr’欄位並非同時以‘\\n’結束"
#: src/msgl-check.c:578
msgid "plural handling is a GNU gettext extension"
msgstr "複數處理是 GNU gettext 的擴展功能"
#: src/msgl-check.c:620
#, c-format
msgid "msgstr lacks the keyboard accelerator mark '%c'"
msgstr "msgstr 缺少了捷徑鍵標記‘%c’"
#: src/msgl-check.c:630
#, c-format
msgid "msgstr has too many keyboard accelerator marks '%c'"
msgstr "msgstr 含有過多的捷徑鍵標記‘%c’"
#: src/msgl-check.c:670
#, c-format
msgid "headerfield `%s' missing in header\n"
msgstr "缺少了標頭欄位‘%s’\n"
#: src/msgl-check.c:678
#, c-format
msgid "header field `%s' should start at beginning of line\n"
msgstr "標頭欄位‘%s’應該位於行首\n"
#: src/msgl-check.c:692
msgid "some header fields still have the initial default value\n"
msgstr "某些標頭欄位仍然是預設值\n"
#: src/msgl-check.c:705
#, c-format
msgid "field `%s' still has initial default value\n"
msgstr "標頭欄位‘%s’仍然是預設值\n"
#: src/msgl-iconv.c:65
#, c-format
msgid "%s: input is not valid in \"%s\" encoding"
msgstr ""
# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format
#: src/msgl-iconv.c:69
#, fuzzy, c-format
msgid "%s: error while converting from \"%s\" encoding to \"%s\" encoding"
msgstr "當開啟檔案 “%s” 準備讀取時發生錯誤"
#: src/msgl-iconv.c:262
msgid "input file doesn't contain a header entry with a charset specification"
msgstr "輸入檔沒有指定字元集的標頭欄位"
#: src/msgl-iconv.c:284 src/recode-sr-latin.c:284 src/recode-sr-latin.c:289
#: src/x-python.c:618 src/xgettext.c:618
#, c-format
msgid ""
"Cannot convert from \"%s\" to \"%s\". %s relies on iconv(), and iconv() does "
"not support this conversion."
msgstr ""
"不支援將字元集由 “%s” 轉換至 “%s”。%s 需要 iconv()，但 iconv() 不支援此種轉換"
"方式。"
#: src/msgl-iconv.c:314
#, c-format
msgid ""
"Conversion from \"%s\" to \"%s\" introduces duplicates: some different "
"msgids become equal."
msgstr ""
"由 “%s” 轉換至 “%s” 會產生重複訊息：有些本來不同的 msgid 轉換後會變成相同。"
#: src/msgl-iconv.c:320 src/recode-sr-latin.c:298 src/x-python.c:625
#: src/xgettext.c:625
#, c-format
msgid ""
"Cannot convert from \"%s\" to \"%s\". %s relies on iconv(). This version was "
"built without iconv()."
msgstr ""
"不支援將字元集由 “%s” 轉換至 “%s”。%s 需要 iconv()，但編譯此程式時沒有 iconv"
"() 支援。"
#: src/msgmerge.c:361 src/msgmerge.c:367
#, c-format
msgid "%s is only valid with %s"
msgstr "%s 只能和 %s 配合一起使用才有效"
#: src/msgmerge.c:421
msgid "backup type"
msgstr "備份方式"
#: src/msgmerge.c:458
#, c-format, no-wrap
msgid ""
"Merges two Uniforum style .po files together. The def.po file is an\n"
"existing PO file with translations which will be taken over to the newly\n"
"created file as long as they still match; comments will be preserved,\n"
"but extracted comments and file positions will be discarded. The ref.pot\n"
"file is the last created PO file with up-to-date source references but\n"
"old translations, or a PO Template file (generally created by xgettext);\n"
"any translations or comments in the file will be discarded, however dot\n"
"comments and file positions will be preserved. Where an exact match\n"
"cannot be found, fuzzy matching is used to produce better results.\n"
msgstr ""
"合併兩個 Uniforum 格式的 .po 檔。def.po 是舊的 PO 檔，裡面的翻譯訊息只要\n"
"和新產生的檔案條目符合，都會被合併進去；合併時會保留自行加上的註解，不過\n"
"會捨棄原程式碼的註解和檔案位置。ref.pot 可以是有最新來源條目但只含有舊翻譯\n"
"的 PO 檔，或是一個 POT 檔 (通常由 xgettext 產生)；任何翻譯後的訊息或檔案裡\n"
"的註解都會被捨棄，但特殊旗標註解和檔案位置都會被保留。比較時如果有不完全\n"
"配合的字串出現，程式會以模糊配對的方式得出較好的結果。\n"
#: src/msgmerge.c:475
#, c-format
msgid " def.po translations referring to old sources\n"
msgstr " def.po 舊版本的翻譯檔\n"
#: src/msgmerge.c:477
#, c-format
msgid " ref.pot references to new sources\n"
msgstr " ref.pot 新版本程式的翻譯檔\n"
#: src/msgmerge.c:481
#, c-format
msgid ""
" -C, --compendium=FILE additional library of message translations,\n"
" may be specified more than once\n"
msgstr " -C, --compendium=FILE 額外的翻譯記憶庫，選項可以使用多次\n"
#: src/msgmerge.c:487
#, c-format
msgid ""
" -U, --update update def.po,\n"
" do nothing if def.po already up to date\n"
msgstr " -U, --update 更新 def.po (僅當 def.po 未更新時)\n"
#: src/msgmerge.c:499
#, c-format
msgid "Output file location in update mode:\n"
msgstr "更新模式的檔案輸出位置：\n"
#: src/msgmerge.c:501
#, c-format
msgid "The result is written back to def.po.\n"
msgstr "輸出結果會寫入至 def.po。\n"
#: src/msgmerge.c:503
#, c-format
msgid " --backup=CONTROL make a backup of def.po\n"
msgstr " --backup=CONTROL 將 def.po 備份\n"
#: src/msgmerge.c:505
#, c-format
msgid " --suffix=SUFFIX override the usual backup suffix\n"
msgstr " --suffix=SUFFIX 自行指定備份檔名末端的字串\n"
#: src/msgmerge.c:507
#, c-format
msgid ""
"The version control method may be selected via the --backup option or "
"through\n"
"the VERSION_CONTROL environment variable. Here are the values:\n"
" none, off never make backups (even if --backup is given)\n"
" numbered, t make numbered backups\n"
" existing, nil numbered if numbered backups exist, simple otherwise\n"
" simple, never always make simple backups\n"
msgstr ""
"版本控制的方式可透過 --backup 選項或 VERSION_CONTROL 環境變數來選擇。\n"
"以下是可用的變數值：\n"
" none, off 即使使用了 --backup 選項仍不會備份\n"
" numbered, t 備份檔名加上數字\n"
" existing, nil 若有數字的備份檔已經存在則使用數字，否則使用一般名稱\n"
" simple, never 永遠使用普通方式備份\n"
#: src/msgmerge.c:514
#, c-format
msgid ""
"The backup suffix is `~', unless set with --suffix or the "
"SIMPLE_BACKUP_SUFFIX\n"
"environment variable.\n"
msgstr ""
"備份檔的後置字元為‘~’，除非以 --suffix 選項或是 SIMPLE_BACKUP_SUFFIX\n"
"環境變數指定。\n"
#: src/msgmerge.c:523
#, c-format
msgid " -N, --no-fuzzy-matching do not use fuzzy matching\n"
msgstr " -N, --no-fuzzy-matching 不進行模糊字串配對\n"
#: src/msgmerge.c:525
#, fuzzy, c-format
msgid ""
" --previous keep previous msgids of translated messages\n"
msgstr " --translated 只保留已翻譯條目，刪除未翻譯條目\n"
#: src/msgmerge.c:574
#, c-format
msgid " -q, --quiet, --silent suppress progress indicators\n"
msgstr " -q, --quiet, --silent 隱藏進度指示\n"
#: src/msgmerge.c:1318
#, c-format
msgid "this message should define plural forms"
msgstr "此訊息應該有複數型態"
#: src/msgmerge.c:1341
#, c-format
msgid "this message should not define plural forms"
msgstr "此訊息不應有複數型態"
#: src/msgmerge.c:1679
#, c-format
msgid ""
"%sRead %ld old + %ld reference, merged %ld, fuzzied %ld, missing %ld, "
"obsolete %ld.\n"
msgstr ""
"%s\n"
"讀入 %ld 舊翻譯 + %ld 參考條目。合併：%ld，模糊：%ld，未譯：%ld，過時：%"
"ld。\n"
#: src/msgmerge.c:1687
msgid " done.\n"
msgstr " 完成。\n"
#: src/msgunfmt.c:297 src/msgunfmt.c:306 src/msgunfmt.c:329
#, c-format
msgid "%s and explicit file names are mutually exclusive"
msgstr "使用 %s 不能同時指定檔案名稱"
#: src/msgunfmt.c:416
#, c-format
msgid "Usage: %s [OPTION] [FILE]...\n"
msgstr "用法：%s [選項] [檔案]...\n"
#: src/msgunfmt.c:420
#, c-format
msgid "Convert binary message catalog to Uniforum style .po file.\n"
msgstr "將二元碼翻譯檔轉換為 Uniforum 型式的 .po 檔。\n"
#: src/msgunfmt.c:429
#, c-format
msgid ""
" -j, --java Java mode: input is a Java ResourceBundle "
"class\n"
msgstr ""
" -j, --java Java 模式：產生 Java ResourceBundle class\n"
#: src/msgunfmt.c:431
#, c-format
msgid " --csharp C# mode: input is a .NET .dll file\n"
msgstr " --csharp C# 模式：輸入檔是 .NET .dll 檔\n"
#: src/msgunfmt.c:433
#, c-format
msgid ""
" --csharp-resources C# resources mode: input is a .NET .resources "
"file\n"
msgstr ""
" --csharp-resources C# resources 模式：輸入內容是 .NET .resources "
"檔案\n"
#: src/msgunfmt.c:435
#, c-format
msgid ""
" --tcl Tcl mode: input is a tcl/msgcat .msg file\n"
msgstr ""
" --tcl Tcl 模式：輸入資料是 tcl/msgcat .msg 檔\n"
#: src/msgunfmt.c:440
#, c-format
msgid " FILE ... input .mo files\n"
msgstr " 檔案 ... 作為輸入的 .mo 檔\n"
#: src/msgunfmt.c:445
#, c-format
msgid "Input file location in Java mode:\n"
msgstr "Java 模式的輸入檔位置：\n"
#: src/msgunfmt.c:451
#, c-format
msgid ""
"The class name is determined by appending the locale name to the resource "
"name,\n"
"separated with an underscore. The class is located using the CLASSPATH.\n"
msgstr ""
"class 名稱是由語言名稱和 resource 名稱合併來決定的，兩者之間會用底線分隔。\n"
"class 檔會在 CLASSPATH 變數所指定的目錄中搜尋。\n"
#: src/msgunfmt.c:456
#, c-format
msgid "Input file location in C# mode:\n"
msgstr "C# 模式的輸入檔位置：\n"
#: src/msgunfmt.c:464
#, c-format
msgid ""
"The -l and -d options are mandatory. The .dll file is located in a\n"
"subdirectory of the specified directory whose name depends on the locale.\n"
msgstr ""
#: src/msgunfmt.c:468
#, c-format
msgid "Input file location in Tcl mode:\n"
msgstr "Tcl 模式的輸入檔位置：\n"
#: src/msgunfmt.c:474
#, c-format
msgid ""
"The -l and -d options are mandatory. The .msg file is located in the\n"
"specified directory.\n"
msgstr ""
#: src/msgunfmt.c:494
#, c-format
msgid " -i, --indent write indented output style\n"
msgstr " -i, --indent 將輸出結果進行縮排\n"
#: src/msgunfmt.c:496
#, c-format
msgid " --strict write strict uniforum style\n"
msgstr " --strict 輸出結果嚴格遵從 Uniforum 格式\n"
#: src/msguniq.c:319
#, c-format, no-wrap
msgid ""
"Unifies duplicate translations in a translation catalog.\n"
"Finds duplicate translations of the same message ID. Such duplicates are\n"
"invalid input for other programs like msgfmt, msgmerge or msgcat. By\n"
"default, duplicates are merged together. When using the --repeated option,\n"
"only duplicates are output, and all other messages are discarded. Comments\n"
"and extracted comments will be cumulated, except that if --use-first is\n"
"specified, they will be taken from the first translation. File positions\n"
"will be cumulated. When using the --unique option, duplicates are discarded.\n"
msgstr ""
"統一翻譯檔裡重複出現的條目。\n"
"它會搜尋重複的條目，這些條目會令 msgfmt、msgmerge 或 msgcat 等的程式無法\n"
"正常處理翻譯條目。在預設模式中，重複的條目會合併在一起。使用 --repeated \n"
"選項時，只會顯示重複的條目而捨棄其它條目。\n"
"自行加上的註解和原程式碼的註解都會累積；除非使用 --use-first 選項，那樣\n"
"則會由第一個翻譯條目中讀取這些資料。檔案位置是會累積下來的。\n"
"當使用 --unique 選項時，則會捨棄任何重複的翻譯條目。\n"
#: src/msguniq.c:352
#, c-format
msgid " -d, --repeated print only duplicates\n"
msgstr " -d, --repeated 只顯示重複條目\n"
#: src/msguniq.c:354
#, c-format
msgid ""
" -u, --unique print only unique messages, discard "
"duplicates\n"
msgstr ""
" -u, --unique 只顯示出現一次的條目，捨棄任何重複的條目\n"
#: src/open-catalog.c:56 libgettextpo/gettext-po.c:103
#: libgettextpo/gettext-po.c:148 libgettextpo/gettext-po.c:193
msgid "<stdin>"
msgstr "<標準輸入>"
#: src/po-charset.c:490
#, c-format
msgid ""
"Charset \"%s\" is not a portable encoding name.\n"
"Message conversion to user's charset might not work.\n"
msgstr ""
"字元集“%s”不是通用的編碼名稱。\n"
"轉換訊息至使用者字元集的功能將不會運作。\n"
#: src/po-charset.c:557
#, c-format
msgid ""
"Charset \"%s\" is not supported. %s relies on iconv(),\n"
"and iconv() does not support \"%s\".\n"
msgstr ""
"不支援字元集 “%s”。%s 需要 iconv()，\n"
"但 iconv() 不支援 “%s”。\n"
#: src/po-charset.c:564 src/po-charset.c:612
msgid ""
"Installing GNU libiconv and then reinstalling GNU gettext\n"
"would fix this problem.\n"
msgstr "先安裝 GNU libiconv，然後再安裝 GNU gettext，將會修正此問題。\n"
#: src/po-charset.c:578 src/po-charset.c:616
msgid "Continuing anyway, expect parse errors."
msgstr "仍會繼續執行，但預計解析內容時會出現錯誤。"
#: src/po-charset.c:580
msgid "Continuing anyway."
msgstr "仍會繼續執行。"
#: src/po-charset.c:607
#, c-format
msgid ""
"Charset \"%s\" is not supported. %s relies on iconv().\n"
"This version was built without iconv().\n"
msgstr ""
"不支援字元集 “%s”。%s 需要 iconv()，\n"
"但編譯此程式時沒有 iconv() 支援。\n"
#: src/po-charset.c:644
msgid ""
"Charset missing in header.\n"
"Message conversion to user's charset will not work.\n"
msgstr ""
"檔頭缺少了指定字元集的欄位。\n"
"轉換訊息至使用者字元集的功能將不會生效。\n"
#: src/po-gram-gen.y:94
#, c-format
msgid "inconsistent use of #~"
msgstr "不一致地使用 #~"
#: src/po-gram-gen.y:241
#, c-format
msgid "missing `msgstr[]' section"
msgstr "缺少了 ‘msgstr[]’ 段落"
#: src/po-gram-gen.y:250
#, c-format
msgid "missing `msgid_plural' section"
msgstr "缺少了 ‘msgid_plural’ 段落"
#: src/po-gram-gen.y:258
#, c-format
msgid "missing `msgstr' section"
msgstr "缺少了 ‘msgstr’ 段落"
#: src/po-gram-gen.y:397
#, c-format
msgid "first plural form has nonzero index"
msgstr "第一個複數格式的索引數字不是 0"
#: src/po-gram-gen.y:399
#, c-format
msgid "plural form has wrong index"
msgstr "複數格式含有錯誤的索引數字"
#: src/po-lex.c:93 src/po-lex.c:112
#, c-format
msgid "too many errors, aborting"
msgstr "錯誤太多，必須中斷作業"
#: src/po-lex.c:440 src/po-lex.c:510 src/write-po.c:512 src/write-po.c:627
#, c-format
msgid "invalid multibyte sequence"
msgstr "無效的位元組序列"
#: src/po-lex.c:468
#, c-format
msgid "incomplete multibyte sequence at end of file"
msgstr "檔案末端出現不完整的位元組序列"
#: src/po-lex.c:478
#, c-format
msgid "incomplete multibyte sequence at end of line"
msgstr "行末出現不完整的位元組序列"
#: src/po-lex.c:490
msgid "iconv failure"
msgstr "iconv 失敗"
#: src/po-lex.c:747
#, c-format
msgid "keyword \"%s\" unknown"
msgstr "不明的關鍵字“%s”"
#: src/po-lex.c:857
#, c-format
msgid "invalid control sequence"
msgstr "無效的控制序列"
#: src/po-lex.c:984
#, c-format
msgid "end-of-file within string"
msgstr "檔案在字串中段突然結束"
#: src/po-lex.c:990
#, c-format
msgid "end-of-line within string"
msgstr "字串中間突然斷行"
#: src/po-lex.c:1011
#, c-format
msgid "context separator <EOT> within string"
msgstr ""
#: src/read-catalog.c:328 src/xgettext.c:907
#, c-format
msgid "this file may not contain domain directives"
msgstr "此檔案不能含有 domain 指令"
#: src/read-catalog.c:373
msgid "duplicate message definition"
msgstr "訊息被重複定義"
#: src/read-catalog.c:375
#, fuzzy
msgid "this is the location of the first definition"
msgstr "...這是第一次定義的位置"
#: src/read-mo.c:101 src/read-mo.c:122 src/read-mo.c:168 src/read-mo.c:195
#, c-format
msgid "file \"%s\" is truncated"
msgstr "檔案 “%s” 被截斷了"
#: src/read-mo.c:125
#, c-format
msgid "file \"%s\" contains a not NUL terminated string"
msgstr "檔案 “%s” 包含並非以 NUL 為結尾的字串"
#: src/read-mo.c:161 src/read-mo.c:270
#, c-format
msgid "file \"%s\" is not in GNU .mo format"
msgstr "檔案 “%s” 並非 GNU .mo 格式檔案"
#: src/read-mo.c:174
#, c-format
msgid "file \"%s\" contains a not NUL terminated string, at %s"
msgstr "檔案 “%s” 在 %s 包含並非以 NUL 為結尾的字串"
#: src/read-properties.c:223
#, fuzzy
msgid "warning: invalid \\uxxxx syntax for Unicode character"
msgstr "%s:%lu: 錯誤：Unicode 字元格式 \\uxxxx 無效"
#: src/read-stringtable.c:804
#, fuzzy
msgid "warning: unterminated string"
msgstr "%s:%d: 警告：字串未完結"
#: src/read-stringtable.c:812
#, fuzzy
msgid "warning: syntax error"
msgstr "%s:%lu: 警告：格式錯誤"
#: src/read-stringtable.c:873 src/read-stringtable.c:895
#, fuzzy
msgid "warning: unterminated key/value pair"
msgstr "%s:%d: 警告：正規表示式不完整"
#: src/read-stringtable.c:941
#, fuzzy
msgid "warning: syntax error, expected ';' after string"
msgstr "%s:%lu: 警告：格式錯誤，字串後應出現‘;’"
#: src/read-stringtable.c:950
#, fuzzy
msgid "warning: syntax error, expected '=' or ';' after string"
msgstr "%s:%lu: 警告：格式錯誤，字串後應該出現 ‘=’ 或 ‘;’"
#: src/recode-sr-latin.c:117
#, fuzzy, c-format
msgid "Written by %s and %s.\n"
msgstr "由 %s 編寫。\n"
#. TRANSLATORS: This is a proper name. The last name is
#. (with Unicode escapes) "\u0160egan" or (with HTML entities)
#. "Šegan".
#. This is a proper name. See the gettext manual, section Names.
#: src/recode-sr-latin.c:121
msgid "Danilo Segan"
msgstr ""
#: src/recode-sr-latin.c:154
#, c-format, no-wrap
msgid "Recode Serbian text from Cyrillic to Latin script.\n"
msgstr ""
#: src/recode-sr-latin.c:157
#, c-format, no-wrap
msgid ""
"The input text is read from standard input. The converted text is output to\n"
"standard output.\n"
msgstr ""
#: src/recode-sr-latin.c:332
#, c-format
msgid "input is not valid in \"%s\" encoding"
msgstr ""
# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format
#: src/recode-sr-latin.c:349
#, fuzzy, c-format
msgid "error while converting from \"%s\" encoding to \"%s\" encoding"
msgstr "當開啟檔案 “%s” 準備讀取時發生錯誤"
#: src/urlget.c:147
#, c-format
msgid "expected two arguments"
msgstr "需要恰好兩個參數"
#: src/urlget.c:164
#, c-format
msgid "Usage: %s [OPTION] URL FILE\n"
msgstr "用法：%s [選項] 網址 檔案\n"
#: src/urlget.c:169
#, c-format, no-wrap
msgid ""
"Fetches and outputs the contents of an URL. If the URL cannot be accessed,\n"
"the locally accessible FILE is used instead.\n"
msgstr "擷取並輸出某網址的內容。如果無法存取該網址，則改用指定的本機檔案代替。\n"
#: src/urlget.c:216
#, c-format
msgid "error writing stdout"
msgstr "寫入至標準輸出時發生錯誤"
#: src/write-catalog.c:102
#, fuzzy
msgid ""
"Cannot output multiple translation domains into a single file with the "
"specified output format. Try using PO file syntax instead."
msgstr ""
"不可以將多個屬於不同 domain 的翻譯訊息寫入一個 Java .properties 檔案。請改用"
"PO 檔案格式。"
#: src/write-catalog.c:105
#, fuzzy
msgid ""
"Cannot output multiple translation domains into a single file with the "
"specified output format."
msgstr ""
"不可以將多個屬於不同領域的翻譯訊息寫入一個 NeXTstep/GNUstep .strings 檔案。"
#: src/write-catalog.c:138
#, fuzzy
msgid ""
"message catalog has context dependent translations, but the output format "
"does not support them."
msgstr "翻譯檔含有複數型態的翻譯，但輸出檔的格式不支援複數型態。"
#: src/write-catalog.c:173
msgid ""
"message catalog has plural form translations, but the output format does not "
"support them. Try generating a Java class using \"msgfmt --java\", instead "
"of a properties file."
msgstr ""
"翻譯檔中有複數格式的翻譯字句，但輸出格式不支援複數。請嘗試使用 “msgfmt --"
"java” 產生 Java class，而不用 properties 檔案。"
#: src/write-catalog.c:178
msgid ""
"message catalog has plural form translations, but the output format does not "
"support them."
msgstr "翻譯檔含有複數型態的翻譯，但輸出檔的格式不支援複數型態。"
#: src/write-catalog.c:195
#, c-format
msgid "cannot create output file \"%s\""
msgstr "無法產生輸出檔 “%s”"
#: src/write-catalog.c:204
#, no-c-format
msgid "standard output"
msgstr "標準輸出"
#: src/write-csharp.c:618
#, fuzzy
msgid ""
"message catalog has context dependent translations\n"
"but the C# .dll format doesn't support contexts\n"
msgstr "翻譯檔含有複數型態的翻譯，但 C# 的翻譯檔不能處理複數型態\n"
#: src/write-csharp.c:685
#, c-format
msgid "failed to create directory \"%s\""
msgstr "無法建立 “%s” 目錄"
#: src/write-csharp.c:747
#, c-format
msgid "compilation of C# class failed, please try --verbose"
msgstr "編譯 C# class 檔出現錯誤，請嘗試使用 --verbose 選項"
#: src/write-java.c:920
#, fuzzy
msgid ""
"message catalog has context dependent translations\n"
"but the Java ResourceBundle format doesn't support contexts\n"
msgstr "翻譯檔含有複數型態的翻譯，但 C# 的翻譯檔不能處理複數型態\n"
#: src/write-java.c:945
#, c-format
msgid "not a valid Java class name: %s"
msgstr "並非有效的 Java class 名稱：%s"
#: src/write-java.c:1029
#, c-format
msgid "compilation of Java class failed, please try --verbose or set $JAVAC"
msgstr ""
"編譯 Java class 檔出現錯誤，請嘗試使用 --verbose 選項或設定 $JAVAC 環境變數"
#: src/write-mo.c:807 src/write-qt.c:740 src/write-tcl.c:213
#, c-format
msgid "error while opening \"%s\" for writing"
msgstr "當開啟檔案 “%s” 來寫入內容時發生錯誤"
#: src/write-po.c:567
#, c-format
msgid ""
"internationalized messages should not contain the `\\%c' escape sequence"
msgstr "國際化的訊息不應含有 ‘\\%c’ 這個轉義控制序列 (escape sequence)"
#: src/write-po.c:848 src/write-po.c:961
#, fuzzy, c-format
msgid ""
"The following msgctxt contains non-ASCII characters.\n"
"This will cause problems to translators who use a character encoding\n"
"different from yours. Consider using a pure ASCII msgctxt instead.\n"
"%s\n"
msgstr ""
"下列的 msgid 含有不屬於 ASCII 的字元。\n"
"這樣會對任何使用其它編碼 (和您用的字元集編碼不同) 的翻譯者構成問題。\n"
"請考慮使用只有 ASCII 字元的 msgid。\n"
"%s\n"
#: src/write-po.c:860 src/write-po.c:973
#, c-format
msgid ""
"The following msgid contains non-ASCII characters.\n"
"This will cause problems to translators who use a character encoding\n"
"different from yours. Consider using a pure ASCII msgid instead.\n"
"%s\n"
msgstr ""
"下列的 msgid 含有不屬於 ASCII 的字元。\n"
"這樣會對任何使用其它編碼 (和您用的字元集編碼不同) 的翻譯者構成問題。\n"
"請考慮使用只有 ASCII 字元的 msgid。\n"
"%s\n"
#: src/write-qt.c:671
msgid ""
"message catalog has plural form translations\n"
"but the Qt message catalog format doesn't support plural handling\n"
msgstr "翻譯檔含有複數型態的翻譯，但 Qt 的翻譯檔不能處理複數型態\n"
#: src/write-qt.c:697
#, fuzzy
msgid ""
"message catalog has msgctxt strings containing characters outside ISO-8859-"
"1\n"
"but the Qt message catalog format supports Unicode only in the translated\n"
"strings, not in the context strings\n"
msgstr ""
"翻譯檔中某些 msgid 含有 ISO-8859-1 以外的字元，但 Qt 翻譯檔格式只支援翻譯後的"
"字句使用 Unicode，未翻譯的字句是不支援的。\n"
#: src/write-qt.c:721
msgid ""
"message catalog has msgid strings containing characters outside ISO-8859-1\n"
"but the Qt message catalog format supports Unicode only in the translated\n"
"strings, not in the untranslated strings\n"
msgstr ""
"翻譯檔中某些 msgid 含有 ISO-8859-1 以外的字元，但 Qt 翻譯檔格式只支援翻譯後的"
"字句使用 Unicode，未翻譯的字句是不支援的。\n"
#: src/write-resources.c:96
#, c-format
msgid "error while writing to %s subprocess"
msgstr "將內容寫入至 %s 副進程時發生錯誤"
#: src/write-resources.c:132
#, fuzzy
msgid ""
"message catalog has context dependent translations\n"
"but the C# .resources format doesn't support contexts\n"
msgstr "翻譯檔含有複數型態的翻譯，但 C# 的翻譯檔不能處理複數型態\n"
#: src/write-resources.c:151
msgid ""
"message catalog has plural form translations\n"
"but the C# .resources format doesn't support plural handling\n"
msgstr "翻譯檔含有複數型態的翻譯，但 C# 的翻譯檔不能處理複數型態\n"
#: src/write-tcl.c:158
#, fuzzy
msgid ""
"message catalog has context dependent translations\n"
"but the Tcl message catalog format doesn't support contexts\n"
msgstr "翻譯檔含有複數型態的翻譯，但 Tcl 的翻譯檔不能處理複數型態\n"
#: src/write-tcl.c:177
msgid ""
"message catalog has plural form translations\n"
"but the Tcl message catalog format doesn't support plural handling\n"
msgstr "翻譯檔含有複數型態的翻譯，但 Tcl 的翻譯檔不能處理複數型態\n"
#: src/x-awk.c:341 src/x-python.c:1059
#, c-format
msgid "%s:%d: warning: unterminated string"
msgstr "%s:%d: 警告：字串未完結"
#: src/x-awk.c:592
#, c-format
msgid "%s:%d: warning: unterminated regular expression"
msgstr "%s:%d: 警告：正規表示式不完整"
#: src/x-c.c:1153 src/x-csharp.c:1501 src/x-java.c:822
#, c-format
msgid "%s:%d: warning: unterminated character constant"
msgstr "%s:%d: 警告：字元常數未完結"
#: src/x-c.c:1177
#, c-format
msgid "%s:%d: warning: unterminated string literal"
msgstr "%s:%d: 警告：字串未完結"
#: src/x-csharp.c:216 src/xgettext.c:1854
#, c-format
msgid ""
"Non-ASCII string at %s%s.\n"
"Please specify the source encoding through --from-code.\n"
msgstr ""
"%s%s 出現不屬於 ASCII 字元的字串。\n"
"請使用 --from-code 選項指定源代碼的文字編碼。\n"
#: src/x-csharp.c:263
#, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 出現無效的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-csharp.c:279
#, c-format
msgid ""
"%s:%d: Long incomplete multibyte sequence.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 出現無效而且十分長的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-csharp.c:291
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of file.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 檔案末端出現不完整的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-csharp.c:300
#, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of line.\n"
"Please specify the correct source encoding through --from-code.\n"
msgstr ""
"%s:%d: 該行末端出現不完整的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-csharp.c:309 src/x-python.c:332
#, c-format
msgid "%s:%d: iconv failure"
msgstr "%s:%d: iconv 失敗"
#: src/x-csharp.c:332
#, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the source encoding through --from-code.\n"
msgstr ""
"%s:%d: 出現無效的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-csharp.c:1382 src/x-python.c:1259
#, c-format
msgid "%s:%d: warning: invalid Unicode character"
msgstr "%s:%d: 警告：Unicode 字元無效"
#: src/x-csharp.c:1504 src/x-java.c:825
#, c-format
msgid "%s:%d: warning: unterminated string constant"
msgstr "%s:%d: 警告：字元常數未完結"
#: src/x-csharp.c:2008 src/x-java.c:1319
#, c-format
msgid "%s:%d: warning: ')' found where '}' was expected"
msgstr "%s:%d: 應該有 ‘)’ 的地方出現了 ‘}’"
#: src/x-csharp.c:2042 src/x-java.c:1353
#, c-format
msgid "%s:%d: warning: '}' found where ')' was expected"
msgstr "%s:%d: 應該有 ‘}’ 的地方出現了 ‘)’"
#: src/x-glade.c:429 src/x-glade.c:436
#, fuzzy, c-format
msgid "%s:%lu:%lu: %s"
msgstr "%s:%d:%d: %s"
#: src/x-glade.c:463
#, c-format
msgid ""
"Language \"glade\" is not supported. %s relies on expat.\n"
"This version was built without expat.\n"
msgstr ""
"不支援 “glade” 語言。%s 是需要 expat 軟體的，\n"
"但這個版本編譯時沒有加入 expat 支援。\n"
#: src/x-perl.c:307
#, c-format
msgid "%s:%d: can't find string terminator \"%s\" anywhere before EOF"
msgstr "%s:%d: EOF 之前找不到任何表示字串完結的標記 “%s”"
#: src/x-perl.c:1033
#, c-format
msgid "%s:%d: missing right brace on \\x{HEXNUMBER}"
msgstr "%s:%d: \\x{HEXNUMBER} 缺少了右邊的大括號"
#: src/x-perl.c:1153
#, c-format
msgid "%s:%d: invalid interpolation (\"\\l\") of 8bit character \"%c\""
msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\l”) 無效"
#: src/x-perl.c:1173
#, c-format
msgid "%s:%d: invalid interpolation (\"\\u\") of 8bit character \"%c\""
msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\u”) 無效"
#: src/x-perl.c:1207
#, c-format
msgid "%s:%d: invalid variable interpolation at \"%c\""
msgstr ""
#: src/x-perl.c:1220
#, c-format
msgid "%s:%d: invalid interpolation (\"\\L\") of 8bit character \"%c\""
msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\L”) 無效"
#: src/x-perl.c:1237
#, c-format
msgid "%s:%d: invalid interpolation (\"\\U\") of 8bit character \"%c\""
msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\U”) 無效"
#: src/x-python.c:234
#, fuzzy, c-format
msgid ""
"Non-ASCII string at %s%s.\n"
"Please specify the source encoding through --from-code or through a comment\n"
"as specified in http://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s%s 出現不屬於 ASCII 字元的字串。\n"
"請使用 --from-code 選項指定源代碼的文字編碼。\n"
#: src/x-python.c:282
#, fuzzy, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in http://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d: 出現無效的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-python.c:299
#, fuzzy, c-format
msgid ""
"%s:%d: Long incomplete multibyte sequence.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in http://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d: 出現無效而且十分長的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-python.c:312
#, fuzzy, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of file.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in http://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d: 檔案末端出現不完整的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-python.c:322
#, fuzzy, c-format
msgid ""
"%s:%d: Incomplete multibyte sequence at end of line.\n"
"Please specify the correct source encoding through --from-code or through a\n"
"comment as specified in http://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d: 該行末端出現不完整的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-python.c:355
#, fuzzy, c-format
msgid ""
"%s:%d: Invalid multibyte sequence.\n"
"Please specify the source encoding through --from-code or through a comment\n"
"as specified in http://www.python.org/peps/pep-0263.html.\n"
msgstr ""
"%s:%d: 出現無效的位元組序列。\n"
"請使用 --from-code 選項指定源代碼的正確文字編碼。\n"
#: src/x-python.c:675
#, c-format
msgid "Unknown encoding \"%s\". Proceeding with ASCII instead."
msgstr ""
#: src/x-rst.c:107
#, c-format
msgid "%s:%d: invalid string definition"
msgstr "%s:%d: 無效的字串定義"
#: src/x-rst.c:171
#, c-format
msgid "%s:%d: missing number after #"
msgstr "%s:%d: # 後缺少了數字"
#: src/x-rst.c:206
#, c-format
msgid "%s:%d: invalid string expression"
msgstr "%s:%d: 無效的字串表示式"
#: src/x-sh.c:1074
#, c-format
msgid ""
"%s:%lu: warning: the syntax $\"...\" is deprecated due to security reasons; "
"use eval_gettext instead"
msgstr ""
"%s:%lu: 警告：$\"...\" 這種格式因為安全理由已經過時；請改用 eval_gettext"
#: src/xgettext.c:547
#, c-format
msgid "--join-existing cannot be used when output is written to stdout"
msgstr "當結果被導向至標準輸出時，不可以用 --join-existing 選項"
#: src/xgettext.c:552
#, c-format
msgid "xgettext cannot work without keywords to look for"
msgstr "若無關鍵字，xgettext 將無法運作"
#: src/xgettext.c:695
#, c-format
msgid "warning: file `%s' extension `%s' is unknown; will try C"
msgstr "警告：無法辨認檔案 ‘%s’ 的副檔名 ‘%s’；會假設是 C 格式來處理"
#: src/xgettext.c:746
#, c-format
msgid "Extract translatable strings from given input files.\n"
msgstr "由指定的輸入檔抽取可翻譯的字串。\n"
#: src/xgettext.c:769
#, c-format
msgid ""
" -d, --default-domain=NAME use NAME.po for output (instead of messages."
"po)\n"
msgstr ""
" -d, --default-domain=NAME 使用 NAME.po 作為輸出檔 (而不是 messages.po)\n"
#: src/xgettext.c:771
#, c-format
msgid " -o, --output=FILE write output to specified file\n"
msgstr " -o, --output=FILE 將輸出內容寫入至指定檔案\n"
#: src/xgettext.c:773
#, c-format
msgid ""
" -p, --output-dir=DIR output files will be placed in directory DIR\n"
msgstr " -p, --output-dir=DIR 輸出檔會存取在指定目錄\n"
#: src/xgettext.c:778
#, c-format
msgid "Choice of input file language:\n"
msgstr "輸入檔的語言選擇：\n"
#: src/xgettext.c:780
#, c-format
msgid ""
" -L, --language=NAME recognise the specified language\n"
" (C, C++, ObjectiveC, PO, Shell, Python, "
"Lisp,\n"
" EmacsLisp, librep, Scheme, Smalltalk, Java,\n"
" JavaProperties, C#, awk, YCP, Tcl, Perl, "
"PHP,\n"
" GCC-source, NXStringTable, RST, Glade)\n"
msgstr ""
" -L, --language=語言 辨認指定的程式語言\n"
" (C, C++, ObjectiveC, PO, Shell, Python, "
"Lisp,\n"
" EmacsLisp, librep, Scheme, Smalltalk, Java,\n"
" JavaProperties, C#, awk, YCP, Tcl, Perl, "
"PHP,\n"
" GCC-source, NXStringTable, RST, Glade)\n"
#: src/xgettext.c:786
#, c-format
msgid " -C, --c++ shorthand for --language=C++\n"
msgstr " -C, --c++ --language=C++ 的簡寫\n"
#: src/xgettext.c:788
#, c-format
msgid ""
"By default the language is guessed depending on the input file name "
"extension.\n"
msgstr "預設的語言是由輸入檔的延伸檔名決定的。\n"
#: src/xgettext.c:793
#, c-format
msgid ""
" --from-code=NAME encoding of input files\n"
" (except for Python, Tcl, Glade)\n"
msgstr ""
" --from-code=NAME 輸入檔的文字編碼\n"
" (Python, Tcl, Glade 例外)\n"
#: src/xgettext.c:796
#, c-format
msgid "By default the input files are assumed to be in ASCII.\n"
msgstr "輸入檔內容預設會當作 ASCII 看待。\n"
#: src/xgettext.c:801
#, c-format
msgid " -j, --join-existing join messages with existing file\n"
msgstr " -j, --join-existing 合併已存在的訊息檔\n"
#: src/xgettext.c:803
#, c-format
msgid " -x, --exclude-file=FILE.po entries from FILE.po are not extracted\n"
msgstr " -x, --exclude-file=FILE.po 不取出屬於 FILE.po 的訊息\n"
#: src/xgettext.c:805
#, c-format
msgid ""
" -c, --add-comments[=TAG] place comment block with TAG (or those\n"
" preceding keyword lines) in output file\n"
msgstr ""
#: src/xgettext.c:809
#, c-format
msgid "Language specific options:\n"
msgstr "個別語言特殊選項：\n"
#: src/xgettext.c:811
#, c-format
msgid " -a, --extract-all extract all strings\n"
msgstr " -a, --extract-all 抽取所有字串\n"
#: src/xgettext.c:813 src/xgettext.c:820
#, c-format
msgid ""
" (only languages C, C++, ObjectiveC, Shell,\n"
" Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
" C#, awk, Tcl, Perl, PHP, GCC-source, Glade)\n"
msgstr ""
" (只適用於 C, C++, ObjectiveC, Shell,\n"
" Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
" C#, awk, Tcl, Perl, PHP, GCC-source, Glade)\n"
#: src/xgettext.c:817
#, c-format
msgid ""
" -k, --keyword[=WORD] additional keyword to be looked for (without\n"
" WORD means not to use default keywords)\n"
msgstr ""
" -k, --keyword[=WORD] 要留意的額外關鍵字 (如果沒有指定，\n"
" 表示不使用預設的關鍵字)\n"
#: src/xgettext.c:824
#, c-format
msgid ""
" --flag=WORD:ARG:FLAG additional flag for strings inside the "
"argument\n"
" number ARG of keyword WORD\n"
msgstr ""
#: src/xgettext.c:827
#, c-format
msgid ""
" (only languages C, C++, ObjectiveC, Shell,\n"
" Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
" C#, awk, YCP, Tcl, Perl, PHP, GCC-source)\n"
msgstr ""
" (只適用於 C, C++, ObjectiveC, Shell,\n"
" Python, Lisp, EmacsLisp, librep, Scheme, "
"Java,\n"
" C#, awk, YCP, Tcl, Perl, PHP, GCC-source)\n"
#: src/xgettext.c:831
#, c-format
msgid " -T, --trigraphs understand ANSI C trigraphs for input\n"
msgstr " -T, --trigraphs 支援讀取輸入內容中的 ANSI C trigraph\n"
#: src/xgettext.c:833
#, c-format
msgid " (only languages C, C++, ObjectiveC)\n"
msgstr " (只適用於 C, C++, ObjectiveC)\n"
#: src/xgettext.c:835
#, c-format
msgid " --qt recognize Qt format strings\n"
msgstr " --qt 辨認 Qt 格式的字串\n"
#: src/xgettext.c:837 src/xgettext.c:841
#, c-format
msgid " (only language C++)\n"
msgstr " (只適用於 C++)\n"
#: src/xgettext.c:839
#, fuzzy, c-format
msgid " --boost recognize Boost format strings\n"
msgstr " --qt 辨認 Qt 格式的字串\n"
#: src/xgettext.c:843
#, c-format
msgid ""
" --debug more detailed formatstring recognition result\n"
msgstr " --debug 顯示較詳細的格式字串辨認結果\n"
#: src/xgettext.c:862
#, c-format
msgid " --properties-output write out a Java .properties file\n"
msgstr " --properties-output 輸出檔格式為 Java .properties 檔\n"
#: src/xgettext.c:877
#, c-format
msgid " --copyright-holder=STRING set copyright holder in output\n"
msgstr " --copyright-holder=STRING 設定輸出檔的版權所有者\n"
#: src/xgettext.c:879
#, c-format
msgid ""
" --foreign-user omit FSF copyright in output for foreign user\n"
msgstr ""
" --foreign-user 輸出檔不加上 FSF 的版權宣告，適用於 FSF 以外的"
"專案\n"
#: src/xgettext.c:881
#, c-format
msgid ""
" --msgid-bugs-address=EMAIL@ADDRESS set report address for msgid bugs\n"
msgstr ""
" --msgid-bugs-address=EMAIL@ADDRESS 指定匯報 msgid 問題時的郵件地址\n"
#: src/xgettext.c:883
#, c-format
msgid ""
" -m, --msgstr-prefix[=STRING] use STRING or \"\" as prefix for msgstr "
"entries\n"
msgstr ""
#: src/xgettext.c:885
#, c-format
msgid ""
" -M, --msgstr-suffix[=STRING] use STRING or \"\" as suffix for msgstr "
"entries\n"
msgstr ""
#: src/xgettext.c:1649
#, c-format
msgid ""
"A --flag argument doesn't have the <keyword>:<argnum>:[pass-]<flag> syntax: %"
"s"
msgstr ""
#: src/xgettext.c:1750
msgid "standard input"
msgstr "標準輸入"
#: src/xgettext.c:1930 src/xgettext.c:1963 src/xgettext.c:2021
#, c-format
msgid "%s%s: warning: "
msgstr "%s%s: 警告："
#: src/xgettext.c:1933
#, c-format
msgid ""
"Although being used in a format string position, the %s is not a valid %s "
"format string. Reason: %s\n"
msgstr ""
#: src/xgettext.c:1934
#, c-format
msgid ""
"Although declared as such, the %s is not a valid %s format string. Reason: %"
"s\n"
msgstr "縱使表面上 %s 宣告了是 %s 格式字串，但實際上不是。原因為：%s\n"
#: src/xgettext.c:1965
#, c-format
msgid ""
"'%s' format string with unnamed arguments cannot be properly localized:\n"
"The translator cannot reorder the arguments.\n"
"Please consider using a format string with named arguments,\n"
"and a mapping instead of a tuple for the arguments.\n"
msgstr ""
#: src/xgettext.c:2023
msgid ""
"Empty msgid. It is reserved by GNU gettext:\n"
"gettext(\"\") returns the header entry with\n"
"meta information, not the empty string.\n"
msgstr ""
"空白的 msgid。它是保留給 GNU gettext 專用的：\n"
"gettext(\"\") 會回傳檔案開始部份的資訊，\n"
"並非空白字串。\n"
#: src/xgettext.c:2626
#, fuzzy, c-format
msgid "ambiguous argument specification for keyword '%.*s'"
msgstr "%2$s 的參數 %1$s 不明確"
#: src/xgettext.c:2653
#, c-format
msgid "warning: missing context for keyword '%.*s'"
msgstr ""
#: src/xgettext.c:2678
#, c-format
msgid "warning: missing context for plural argument of keyword '%.*s'"
msgstr ""
#: src/xgettext.c:2699
#, c-format
msgid "context mismatch between singular and plural form"
msgstr ""
#: src/xgettext.c:2779
msgid ""
"The option --msgid-bugs-address was not specified.\n"
"If you are using a `Makevars' file, please specify\n"
"the MSGID_BUGS_ADDRESS variable there; otherwise please\n"
"specify an --msgid-bugs-address command line option.\n"
msgstr ""
"您未使用 --msgid-bugs-address 選項。\n"
"如果您使用 ‘Makevars’ 檔案，請在其中設定\n"
"MSGID_BUGS_ADDRESS 變數；否則請在指令中\n"
"使用 --msgid-bugs-address 選項。\n"
#: src/xgettext.c:2978
#, c-format
msgid "language `%s' unknown"
msgstr "不明的語言 ‘%s’"
#: libgettextpo/gettext-po.c:85
msgid "<unnamed>"
msgstr "<未命名>"
#~ msgid "The %%J directive is only allowed at the beginning of the string."
#~ msgstr "%%J 只允許在字串最開始出現。"
#~ msgid "Which is your email address?"
#~ msgstr "請問您的電子郵件地址？"
#~ msgid "Please choose the number, or enter your email address."
#~ msgstr "請選擇數字，或者自行填上電子郵件地址。"
#~ msgid "Invalid email address: invalid character."
#~ msgstr "電子郵件地址無效：字元無效。"
#~ msgid ""
#~ "Invalid email address: need a fully qualified host name or domain name."
#~ msgstr "電子郵件地址無效：需要完整的主機名稱和網域名稱。"
#~ msgid "Invalid email address: missing @"
#~ msgstr "電子郵件地址無效：缺少了 @"
#~ msgid "Is the following your email address?"
#~ msgstr "以下的是否您的電子郵件地址？"
#~ msgid "Please confirm by pressing Return, or enter your email address."
#~ msgstr "請按 [ENTER] 確認，或者自行輸入電子郵件地址。"
#~ msgid "Couldn't find out about your email address."
#~ msgstr "無法決定您的郵件位址。"
#~ msgid "Please enter your email address."
#~ msgstr "請自行輸入電子郵件地址。"
#~ msgid "conversion failure"
#~ msgstr "轉換錯誤"
#~ msgid "%s: warning: "
#~ msgstr "%s：警告："
#~ msgid "%s\n"
#~ msgstr "%s\n"
#~ msgid "%s:%lu: warning: unterminated string"
#~ msgstr "%s:%lu: 警告：字串未結束"
#~ msgid "%s:%d: fatal: plural message seen before singular message\n"
#~ msgstr "%s:%d: 嚴重錯誤：複數式出現在單數式之前\n"