# $NetBSD: INSTALL,v 1.141 2022/08/07 02:53:42 simonb Exp $
#
# This file was automatically created.
# Changes will be lost when make is run in this directory.
#
# Created from: # NetBSD: GENERIC.in,v 1.150 2022/08/07 02:52:23 simonb Exp $
#
##
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel. The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/amiga/conf/std.amiga"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "GENERIC-$Revision: 1.141 $"
makeoptions COPTS="-Os -fno-omit-frame-pointer"
maxusers 8
options RTC_OFFSET=0
#
# mainboards to support (in addition to Amiga)
#
options DRACO
options BB060STUPIDROM # You need this, if you have a non-DraCo
# MC68060 with an OS ROM up to (at least)
# V40 (OS3.1) and want to boot with the
# bootblock.
# You do not need this if you have a DraCo,
# have no 68060 or NEVER use the bootblock
options P5PPC68KBOARD # Phase5 PPC/68K board support
#
# processors this kernel should support
#
options M68060 # support for 060
options M060SP # MC68060 software support (Required for 060)
options M68040 # support for 040
options FPSP # MC68040 floating point support
options M68030 # support for 030
options M68020 # support for 020/851
options FPU_EMULATE # FPU emulation
#
# Networking options
#
options INET # IP networking support (Required)
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_DEBUG # debug for IP security
#options GATEWAY # Packet forwarding
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
#options ALTQ # Manipulate network interfaces' output queues
#options ALTQ_BLUE # Stochastic Fair Blue
#options ALTQ_CBQ # Class-Based Queueing
#options ALTQ_CDNR # Diffserv Traffic Conditioner
#options ALTQ_FIFOQ # First-In First-Out Queue
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
#options ALTQ_HFSC # Hierarchical Fair Service Curve
#options ALTQ_LOCALQ # Local queueing discipline
#options ALTQ_PRIQ # Priority Queueing
#options ALTQ_RED # Random Early Detection
#options ALTQ_RIO # RED with IN/OUT
#options ALTQ_WFQ # Weighted Fair Queueing
# Filesystems
file-system FFS # Berkeley fast file system
file-system EXT2FS # second extended file system (linux)
#file-system LFS # log-structured filesystem (experimental)
file-system NFS # Network File System client side code
file-system ADOSFS # AmigaDOS file system
file-system CD9660 # ISO 9660 + Rock Ridge filesystem
file-system MSDOSFS # MS-DOS filesystem
file-system KERNFS # kernel data-structure filesystem
# Filesystem options
#options FFS_EI # FFS Endian Independent support
options WAPBL # File system journaling support
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
#
# Compatibility options for various existing systems
#
options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x)
options COMPAT_AOUT_M68K # actually make some system calls work.
#
# Support for various kernel options
#
#options INSECURE # disable kernel security levels
options SCSIVERBOSE # human readable SCSI error messages
options USERCONF # userconf(4) support
options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options BUFQ_READPRIO
options BUFQ_PRIOCSCAN
#
# Misc. debugging options
#
options DDB # Kernel debugger
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#options DIAGNOSTIC # Extra kernel sanity checks
#options DEBUG # Enable misc. kernel debugging code
makeoptions DEBUG="-g" # compile full symbol table
#options SYSCALL_DEBUG # debug all syscalls.
#options SCSIDEBUG # Add SCSI debugging statements
#options PANICBUTTON # Forced crash via keypress (?)
#
# Amiga specific options
#
#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
# first bank of RAM. (default: unlimited)
# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
# before the 10 secondinterval ends, or that KBDRESET does work at all.
#options KBDRESET # sync on Ctrl-Amiga-Amiga
# These options improve performance with the built-in serial port
# on slower Amigas. Try the larger buffers first then lev6_defer.
#options SERIBUF_SIZE=4096
#options SEROBUF_SIZE=32
#options LEV6_DEFER # defers l6 to l4 (below serial l5)
#options DEVRELOAD # implement /dev/reload
# # currently only works for a.out kernels
options RETINACONSOLE # enable code to allow retina to be console
options ULOWELLCONSOLE # enable code to allow a2410 to be console
options CL5426CONSOLE # Cirrus console
options CV64CONSOLE # CyberVision console
options TSENGCONSOLE # Tseng console
options CV3DCONSOLE # CyberVision 64/3D console
options GRF_ECS # Enhanced Chip Set
options GRF_NTSC # NTSC
options GRF_PAL # PAL
options GRF_A2024 # Support for the A2024
options GRF_AGA # AGA Chip Set
options GRF_AGA_VGA # AGA VGAONLY timing
options GRF_SUPER72 # AGA Super-72
#options KFONT_8X11 # 8x11 font
# select a font for the console according to the character set and keymap
# you want to use
options KFONT_CONS_ISO8859_1
#options KFONT_CONS_ISO8859_2
# This is how you would tell the kernel the A2410 oscillator frequencies:
# The used frequencies are the defaults, and do not need option setting
#options ULOWELL_OSC1=36000000
#options ULOWELL_OSC2=66667000
# This is how you specify the blitting speed, higher values may speed up blits
# a little bit. If you raise this value too much some trash may appear.
# the commented version is the default.
#options RH_MEMCLK=61000000
# this option enables the 64 bit sprite which does not work
# for quite a few people. E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#options RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#options RETINA_SPEED_HACK
# enables the Hardwarecursor which does not work on some systems.
#options RH_HARDWARECURSOR
# wscons aware interface to amiga custom chips.
# If you enable it enable also wskbd.
#
#amidisplaycc0 at mainbus0 # wscons interface to custom chips
#wsdisplay0 at amidisplaycc0 console ?
#options WSEMUL_VT100
#options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
#options FONT_VT220L8x10
#options FONT_VT220ISO8x16
#z3rambd* at zbus0 # Zorro III RAM block devices
#altmem* at z3rambd?
p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus
grfcc0 at mainbus0 # custom chips
grfrt0 at zbus0 # retina II
grfrh0 at zbus0 # retina III
grfcl* at zbus0 # Picasso II/Piccolo/Spectrum
grful0 at zbus0 # A2410
grfcv0 at zbus0 # CyberVision 64
grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
grfcv3d0 at zbus0 # CyberVision 64/3D
grf0 at grfcc0
grf1 at grfrt0
grf2 at grfrh0
grf3 at grfcl?
grf4 at grful0
grf5 at grfcv0
grf6 at grfet?
grf7 at grfcv3d0
ite0 at grf0 # terminal emulators for grfs
ite1 at grf1 # terminal emulators for grfs
ite2 at grf2 # terminal emulators for grfs
ite3 at grf3 # terminal emulators for grfs
ite4 at grf4 # terminal emulators for grfs
ite5 at grf5 # terminal emulators for grfs
ite6 at grf6 # terminal emulators for grfs
ite7 at grf7 # terminal emulators for grfs
#wsdisplay* at grf5 console ? # wsdisplay on top of grf (CV64)
#wsdisplay* at grf7 console ? # wsdisplay on top of grf (CV64/3D)
msc0 at zbus0 # A2232 MSC multiport serial.
mfc0 at zbus0 # MultiFaceCard I/O board
mfcs0 at mfc0 unit 0 # MFC serial
mfcs1 at mfc0 unit 1 # MFC serial
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
#mfcs2 at mfc1 unit 0
#mfcs3 at mfc1 unit 1
#mfcp1 at mfc1 unit 0
hyper* at zbus? # zbus HyperCom3/3+/4/4+
#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
com* at hyper? port ? # Hypercom3/4 serial ports
lpt* at hyper? port ? # Hypercom3+/4+ parallel port
#options IOBZCLOCK=22118400 # default, uncomment the next line
#options IOBZCLOCK=24000000 # if needed.
iobl* at zbus? # zbus IOBlix
com* at iobl? port ? # IOBlix serial ports
lpt* at iobl? port ? # IOBlix parallel ports
#
# Keyboard device. Optionally can attach a wskbd.
# wskbd works together with a wsdisplay so enable them both if you will.
# Don't enable wskbd if you use ite.
#
# XXX in std.amiga: kbd0 at mainbus0
#wskbd0 at kbd0 console ?
#
# Amiga Mainboard devices (sans graphics and keyboard)
#
ser0 at mainbus0 # Amiga onboard serial
par0 at mainbus0 # Amiga onboard parallel
ms* at mainbus0 # Amiga mice
fdc0 at mainbus0 # Amiga FDC
fd* at fdc0 unit ? # floppy disks on the later
a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
a2kbbc0 at mainbus0 # A2000 battery backed clock
#wsmouse* at ms?
#
# DraCo Mainboard devices (sans keyboard)
#
drbbc0 at mainbus0 # DraCo battery backed clock
drsupio0 at mainbus0 # DraCo superio chip
com* at drsupio? port ? # DraCo serial
lpt0 at drsupio? port ? # DraCo parallel
#
# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
#
# Ethernet cards:
le* at zbus0 # A2065, Ameristar, Ariadne
ne* at zbus0 # AriadneII
ed* at zbus0 # Hydra, ASDG LanRover
es* at zbus0 # CEI A4066 EthernetPLUS
qn* at zbus0 # Quicknet
xsh* at zbus0 # X-Surf 100
ne* at xshbus? # NE2000 chip on X-Surf 100
xsurf* at zbus0 # X-Surf
ne* at xsurfbus? # NE2000 chip on X-Surf
gencp* at xsurfbus? # clockports on X-Surf
wdc* at xsurfbus? # IDE on X-Surf
clockport* at gencp?
# Arcnet
bah* at zbus0 # C=/Ameristar A2060 / 560
# Greater Valley Product Bus
gvpbus* at zbus0
# scsi stuff, all possible
gtsc0 at gvpbus? # GVP series II scsi
scsibus* at gtsc0
ahsc0 at mainbus0 # A3000 scsi
scsibus* at ahsc0
atzsc0 at zbus0 # A2091 scsi
scsibus* at atzsc0
wstsc0 at zbus0 # Wordsync II scsi
scsibus* at wstsc0
ivsc0 at zbus0 # IVS scsi
scsibus* at ivsc0
mlhsc0 at zbus0 # Hacker scsi
scsibus* at mlhsc0
otgsc0 at zbus0 # 12 gauge scsi
scsibus* at otgsc0
zssc0 at zbus0 # Zeus scsi
scsibus* at zssc0
mgnsc0 at zbus0 # Magnum scsi
scsibus* at mgnsc0
wesc0 at zbus0 # Warp Engine scsi
scsibus* at wesc0
bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi
scsibus* at bppcsc0
afsc0 at zbus0 # A4091 scsi
scsibus* at afsc0
aftsc0 at mainbus0 # A4000T scsi
scsibus* at aftsc0
flsc0 at zbus0 # FastlaneZ3 scsi
scsibus* at flsc0
bzsc0 at zbus0 # Blizzard 1230 I,II scsi
scsibus* at bzsc0
bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
scsibus* at bzivsc0
bztzsc0 at zbus0 # Blizzard 2060 scsi
scsibus* at bztzsc0
cbsc0 at zbus0 # CyberSCSI I
scsibus* at cbsc0
cbiisc0 at zbus0 # CyberSCSI II
scsibus* at cbiisc0
cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
scsibus* at cbiiisc0
empsc0 at zbus0 # Emplant scsi
scsibus* at empsc0
acafh0 at mainbus0 # Individual Computers ACA500
wdc* at acafhbus? # CF slots on ACA500
gencp* at acafhbus? # clockport on ACA500
wdc0 at mainbus0 # A4000 & A1200 IDE bus
wdc* at zbus0 # Buddha / Catweasel
#efa0 at mainbus0 # ELBOX FastATA 1200 Mk-III/Mk-IV
atabus* at wdc? channel ? # ATA bus
#atabus* at efa? channel ? # ATA bus
atabus* at ata? channel ? # ATA bus
wd* at atabus? drive ? # + drives
atapibus* at atabus? # ATAPI bus
cd* at atapibus? drive ? # ATAPI CD-ROM drives
sd* at atapibus? drive ? # ATAPI disk drives
pccard0 at mainbus0
pcmcia* at pccard0
com* at pcmcia? function ? # Modems and serial cards
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
wdc* at pcmcia? function ?
awi* at pcmcia? function ? # BayStack 650 (802.11FH)
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
mbe* at pcmcia? function ? # MB8696x based Ethernet
ne* at pcmcia? function ? # NE2000-compatible Ethernet
sm* at pcmcia? function ? # Megahertz Ethernet
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
com* at mhzc?
sm* at mhzc?
nsphyter* at mii? phy ? # NS83843 PHYs
ukphy* at mii? phy ? # generic unknown PHYs
drsc0 at mainbus0 # DraCo scsi
scsibus* at drsc0
# each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
st* at scsibus? target ? lun ? # scsi tapes
cd* at scsibus? target ? lun ? # scsi cds
ch* at scsibus? target ? lun ? # scsi autochangers
# PCI bus support
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP
options PCI_NETBSD_CONFIGURE # supported by mppb(4), p5pb(4), empb(4)
p5pb0 at p5bus0 # Phase5 PCI bridge (CVPPC/BVPPC/G-REX)
p5membar* at zbus0 # Phase5 PCI bridge autoconfiguring BARs
#options P5PB_DEBUG # enable excessive debug for p5pb
#options P5PB_CONSOLE # console on CVPPC/BVPPC/Voodoo3
pci* at p5pb0
mppb* at zbus0 # Matay Prometheus Zorro-PCI bridge
pci* at mppb?
empb0 at zbus0 # ELBOX Mediator PCI 1200
em4k0 at zbus0 # ELBOX Mediator PCI 4000
emmem0 at zbus0 # ELBOX Mediator PCI memory space
empm0 at empb0 # ELBOX Mediator PCI Power Management
pci* at empb0
pci* at em4k0
#cv3dpb* at zbus0 # CyberVision 64/3D PCI bridge
#genfb* at pci? # generic fb, CVPPC/BVPPC only
#voodoofb* at pci? # 3Dfx Voodoo 3 in G-REX
#radeonfb* at pci? # untested
ne* at pci? # NE2000 Ethernet
satalink* at pci? dev ? function ? flags 0x0002 # SiI SATALink 3112
# Bluetooth Controller and Device support
# tested only with btuart on an A1200
# Bluetooth PCMCIA Controllers
bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A
btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139
# Bluetooth Device Hub
bthub* at bcsp?
bthub* at bt3c?
bthub* at btbc?
bthub* at btuart?
# Bluetooth HID support
bthidev* at bthub?
# Bluetooth Mouse
#btms* at bthidev? reportid ?
#wsmouse* at btms? mux 0
# Bluetooth Keyboard
#btkbd* at bthidev? reportid ?
#wskbd* at btkbd? console ? mux 1
# Bluetooth Apple Magic Mouse
#btmagic* at bthub?
#wsmouse* at btmagic? mux 0
# Bluetooth Audio support
#btsco* at bthub?
# USB
slhci* at zbus? # Thylacine
usb* at slhci?
uhub* at usb?
uhub* at uhub? port ?
uhidev* at uhub? port ? configuration ? interface ?
uhid* at uhidev? reportid ?
pseudo-device loop # loopback network interface
pseudo-device sl # SLIP network interfaces
pseudo-device ppp # PPP network interfaces
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device tun # network tunnel line discipline
pseudo-device tap # virtual Ethernet
#pseudo-device gre # generic L3 over IP tunnel
pseudo-device bpfilter # Berkeley packet filter
pseudo-device carp # Common Address Redundancy Protocol
pseudo-device npf # NPF packet filter
pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith # IPv[46] tcp relay translation i/f
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
pseudo-device vether # Virtual Ethernet for bridge
pseudo-device agr # IEEE 802.3ad link aggregation
#pseudo-device fss # file system snapshot device
#pseudo-device putter # for puffs and pud
pseudo-device view 4 # views (needed for grfcc)
pseudo-device pty # pseudo-terminals
pseudo-device clockctl # user control of clock subsystem
#pseudo-device wsfont # wsfont(4) dynamic font loading support
#pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device vnd # vnode pseudo-disks
#options VND_COMPRESSION # compressed vnd(4)
pseudo-device ccd # concatenated disk devices
#pseudo-device cgd # cryptographic disk devices
pseudo-device raid # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options RF_INCLUDE_EVENODD=1
# options RF_INCLUDE_RAID5_RS=1
# options RF_INCLUDE_PARITYLOGGING=1
# options RF_INCLUDE_CHAINDECLUSTER=1
# options RF_INCLUDE_INTERDECLUSTER=1
# options RF_INCLUDE_PARITY_DECLUSTERING=1
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
#options RND_COM # use "com" randomness as well (BROKEN)
pseudo-device bcsp # BlueCore Serial Protocol
pseudo-device btuart # Bluetooth HCI UART (H4)
# Veriexec
include "dev/veriexec.config"
config netbsd root on ? type ?