/* $NetBSD: memcreg.h,v 1.4 2008/04/28 20:23:54 martin Exp $ */
/*-
* Copyright (c) 2000, 2002 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Steve C. Woodford.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Register definitions for the MEMECC and MEMC040 devices.
*/
#ifndef _MVME_MEMCREG_H
#define _MVME_MEMCREG_H
/*
* Size, in bytes, of the memory controller's register set
* (Actually, the MEMC040's register set is only 0x20 bytes in size, but
* we go with the larger of the two).
*/
#define MEMC_REGSIZE 0x80
/* Both memory controllers share some registers in common */
#define MEMC_REG_CHIP_ID 0x00
#define MEMC_CHIP_ID_MEMC040 0x80 /* It's a MEMC040 */
#define MEMC_CHIP_ID_MEMECC 0x81 /* It's a MEMECC */
/* Revision of the ASIC */
#define MEMC_REG_CHIP_REVISION 0x04
/* Configuration of the memory block controlled by this ASIC */
#define MEMC_REG_MEMORY_CONFIG 0x08
#define MEMC_MEMORY_CONFIG_2_BYTES(x) (0x400000 << ((x) & 0x07))
#define MEMC_MEMORY_CONFIG_2_MB(x) (4 << ((x) & 0x07))
#define MEMC040_MEMORY_CONFIG_EXTPEN (1u << 3) /* External parity enabled */
#define MEMC040_MEMORY_CONFIG_WPB (1u << 4) /* Write Per Bit mode */
#define MEMC_MEMORY_CONFIG_FSTRD (1u << 5) /* Fast RAM Read enabled */
/* Where, in the CPU's address space, does this memory appear? */
#define MEMC_REG_BASE_ADDRESS_HI 0x14
#define MEMC_REG_BASE_ADDRESS_LO 0x18
#define MEMC_BASE_ADDRESS(hi,lo) (((hi) << 24) | (((lo) & 0xc0) << 22))
/* Tells the memory controller what the board's Bus Clock frequency is */
#define MEMC_REG_BUS_CLOCK 0x1c
/* Register offsets and definitions for the Parity Memory Controller */
#define MEMC040_REG_ALT_STATUS 0x0c /* Not used */
#define MEMC040_REG_ALT_CONTROL 0x10 /* Not used */
/* Memory Control Register */
#define MEMC040_REG_RAM_CONTROL 0x18
#define MEMC040_RAM_CONTROL_RAMEN (1u << 0)
#define MEMC040_RAM_CONTROL_PAREN (1u << 1)
#define MEMC040_RAM_CONTROL_PARINT (1u << 2)
#define MEMC040_RAM_CONTROL_WWP (1u << 3)
#define MEMC040_RAM_CONTROL_SWAIT (1u << 4)
#define MEMC040_RAM_CONTROL_DMCTL (1u << 5)
/* Register offsets and definitions for the ECC Memory Controller */
#define MEMECC_REG_DRAM_CONTROL 0x18
#define MEMECC_DRAM_CONTROL_RAMEN (1u << 0)
#define MEMECC_DRAM_CONTROL_NCEBEN (1u << 1)
#define MEMECC_DRAM_CONTROL_NCEIEN (1u << 2)
#define MEMECC_DRAM_CONTROL_RWB3 (1u << 3)
#define MEMECC_DRAM_CONTROL_SWAIT (1u << 4)
#define MEMECC_DRAM_CONTROL_RWB5 (1u << 5)
#define MEMECC_DRAM_CONTROL_BAD22 (1u << 6)
#define MEMECC_DRAM_CONTROL_BAD23 (1u << 7)
#define MEMECC_REG_DATA_CONTROL 0x20
#define MEMECC_DATA_CONTROL_RWCKB (1u << 3)
#define MEMECC_DATA_CONTROL_ZFILL (1u << 4)
#define MEMECC_DATA_CONTROL_DERC (1u << 5)
#define MEMECC_REG_SCRUB_CONTROL 0x24
#define MEMECC_SCRUB_CONTROL_IDIS (1u << 0)
#define MEMECC_SCRUB_CONTROL_SBEIEN (1u << 1)
#define MEMECC_SCRUB_CONTROL_SCRBEN (1u << 3)
#define MEMECC_SCRUB_CONTROL_SCRB (1u << 4)
#define MEMECC_SCRUB_CONTROL_HITDIS (1u << 5)
#define MEMECC_SCRUB_CONTROL_RADATA (1u << 6)
#define MEMECC_SCRUB_CONTROL_RACODE (1u << 7)
#define MEMECC_REG_SCRUB_PERIOD_HI 0x28
#define MEMECC_SCRUB_PERIOD_HI(secs) (((secs) / 2) >> 8)
#define MEMECC_REG_SCRUB_PERIOD_LO 0x2c
#define MEMECC_SCRUB_PERIOD_LO(secs) (((secs) / 2) & 0xffu)
#define MEMECC_REG_CHIP_PRESCALE 0x30
#define MEMECC_REG_SCRUB_TIME_ONOFF 0x34
#define MEMECC_SCRUB_TIME_ONOFF_MASK 0x07u
#define MEMECC_SCRUB_TIME_OFF_0 0u
#define MEMECC_SCRUB_TIME_OFF_16 1u
#define MEMECC_SCRUB_TIME_OFF_32 2u
#define MEMECC_SCRUB_TIME_OFF_64 3u
#define MEMECC_SCRUB_TIME_OFF_128 4u
#define MEMECC_SCRUB_TIME_OFF_256 5u
#define MEMECC_SCRUB_TIME_OFF_512 6u
#define MEMECC_SCRUB_TIME_OFF_NEVER 7u
#define MEMECC_SCRUB_TIME_ON_1 (0u << 3)
#define MEMECC_SCRUB_TIME_ON_16 (1u << 3)
#define MEMECC_SCRUB_TIME_ON_32 (2u << 3)
#define MEMECC_SCRUB_TIME_ON_64 (3u << 3)
#define MEMECC_SCRUB_TIME_ON_128 (4u << 3)
#define MEMECC_SCRUB_TIME_ON_256 (5u << 3)
#define MEMECC_SCRUB_TIME_ON_512 (6u << 3)
#define MEMECC_SCRUB_TIME_ON_ALWAYS (7u << 3)
#define MEMECC_SCRUB_TIME_SRDIS (1u << 7)
#define MEMECC_REG_SCRUB_PRESCALE_HI 0x38
#define MEMECC_REG_SCRUB_PRESCALE_MID 0x3c
#define MEMECC_REG_SCRUB_PRESCALE_LO 0x40
#define MEMECC_REG_SCRUB_TIMER_HI 0x44
#define MEMECC_REG_SCRUB_TIMER_LO 0x48
#define MEMECC_REG_SCRUB_ADDR_CNTR_HIHI 0x4c
#define MEMECC_REG_SCRUB_ADDR_CNTR_HI 0x50
#define MEMECC_REG_SCRUB_ADDR_CNTR_MID 0x54
#define MEMECC_REG_SCRUB_ADDR_CNTR_LO 0x58
#define MEMECC_REG_ERROR_LOGGER 0x5c
#define MEMECC_ERROR_LOGGER_MASK 0x7fu
#define MEMECC_ERROR_LOGGER_SBE (1u << 0)
#define MEMECC_ERROR_LOGGER_MBE (1u << 1)
#define MEMECC_ERROR_LOGGER_EALT (1u << 3)
#define MEMECC_ERROR_LOGGER_ERA (1u << 4)
#define MEMECC_ERROR_LOGGER_ESCRB (1u << 5)
#define MEMECC_ERROR_LOGGER_ERD (1u << 6)
#define MEMECC_ERROR_LOGGER_ERRLOG (1u << 7)
#define MEMECC_REG_ERROR_ADDRESS_HIHI 0x60
#define MEMECC_REG_ERROR_ADDRESS_HI 0x64
#define MEMECC_REG_ERROR_ADDRESS_MID 0x68
#define MEMECC_REG_ERROR_ADDRESS_LO 0x6c
#define MEMECC_REG_ERROR_SYNDROME 0x70
#define MEMECC_REG_DEFAULTS1 0x74
#define MEMECC_REG_DEFAULTS2 0x78
#define MEMECC_REG_SDRAM_CONFIG 0x7c
#endif /* _MVME_MEMCREG_H */