/* $NetBSD: i80321_mainbus.c,v 1.3 2012/02/12 16:31:01 matt Exp $ */
/*
* Copyright (c) 2001, 2002 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Jason R. Thorpe for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: i80321_mainbus.c,v 1.3 2012/02/12 16:31:01 matt Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <machine/autoconf.h>
#include <sys/bus.h>
#include <evbarm/hdl_g/hdlgreg.h>
#include <evbarm/hdl_g/hdlgvar.h>
#include <arm/xscale/i80321reg.h>
#include <arm/xscale/i80321var.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
int hdlg_mainbus_match(device_t, cfdata_t, void *);
void hdlg_mainbus_attach(device_t, device_t, void *);
CFATTACH_DECL_NEW(iopxs_mainbus, sizeof(struct i80321_softc),
hdlg_mainbus_match, hdlg_mainbus_attach, NULL, NULL);
/* There can be only one. */
int hdlg_mainbus_found;
int
hdlg_mainbus_match(device_t parent, cfdata_t cf, void *aux)
{
if (hdlg_mainbus_found)
return 0;
return 1;
}
void
hdlg_mainbus_attach(device_t parent, device_t self, void *aux)
{
struct i80321_softc *sc = device_private(self);
pcireg_t b0u, b0l, b1u, b1l;
paddr_t memstart;
psize_t memsize;
hdlg_mainbus_found = 1;
sc->sc_dev = self;
/*
* Fill in the space tag for the i80321's own devices,
* and hand-craft the space handle for it (the device
* was mapped during early bootstrap).
*/
i80321_bs_init(&i80321_bs_tag, sc);
sc->sc_st = &i80321_bs_tag;
sc->sc_sh = HDLG_80321_VBASE;
/*
* Slice off a subregion for the Memory Controller -- we need it
* here in order read the memory size.
*/
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_MCU_BASE,
VERDE_MCU_SIZE, &sc->sc_mcu_sh))
panic("%s: unable to subregion MCU registers",
device_xname(sc->sc_dev));
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_ATU_BASE,
VERDE_ATU_SIZE, &sc->sc_atu_sh))
panic("%s: unable to subregion ATU registers",
device_xname(sc->sc_dev));
/*
* We have mapped the PCI I/O windows in the early bootstrap phase.
*/
sc->sc_iow_vaddr = HDLG_IOW_VBASE;
/*
* Check the configuration of the ATU to see if another BIOS
* has configured us. If a PC BIOS didn't configure us, then:
* IQ80321: BAR0 00000000.0000000c BAR1 is 00000000.8000000c.
* IQ31244: BAR0 00000000.00000004 BAR1 is 00000000.0000000c.
* If a BIOS has configured us, at least one of those should be
* different. This is pretty fragile, but it's not clear what
* would work better.
*/
b0l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x0);
b0u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x4);
b1l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x8);
b1u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0xc);
b0l &= PCI_MAPREG_MEM_ADDR_MASK;
b0u &= PCI_MAPREG_MEM_ADDR_MASK;
b1l &= PCI_MAPREG_MEM_ADDR_MASK;
b1u &= PCI_MAPREG_MEM_ADDR_MASK;
if ((b0u != b1u) || (b0l != 0) || ((b1l & ~0x80000000U) != 0))
sc->sc_is_host = 0;
else
sc->sc_is_host = 1;
aprint_naive(": i80219 I/O Processor\n");
aprint_normal(": i80219 I/O Processor, acting as PCI %s\n",
sc->sc_is_host ? "host" : "slave");
i80321_intr_evcnt_attach();
i80321_sdram_bounds(sc->sc_st, sc->sc_mcu_sh, &memstart, &memsize);
/*
* We set up the Inbound Windows as follows:
*
* 0 Access to i80219 PMMRs
*
* 1 Reserve space for private devices
*
* 2 RAM access
*
* 3 Unused.
*
* This chunk needs to be customized for each IOP321 application.
*/
#if 0
sc->sc_iwin[0].iwin_base_lo = VERDE_PMMR_BASE;
sc->sc_iwin[0].iwin_base_hi = 0;
sc->sc_iwin[0].iwin_xlate = VERDE_PMMR_BASE;
sc->sc_iwin[0].iwin_size = VERDE_PMMR_SIZE;
#endif
if (sc->sc_is_host) {
/* Map PCI:Local 1:1. */
sc->sc_iwin[1].iwin_base_lo = VERDE_OUT_XLATE_MEM_WIN0_BASE |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[1].iwin_base_hi = 0;
} else {
sc->sc_iwin[1].iwin_base_lo = 0;
sc->sc_iwin[1].iwin_base_hi = 0;
}
sc->sc_iwin[1].iwin_xlate = VERDE_OUT_XLATE_MEM_WIN0_BASE;
sc->sc_iwin[1].iwin_size = VERDE_OUT_XLATE_MEM_WIN_SIZE;
if (sc->sc_is_host) {
sc->sc_iwin[2].iwin_base_lo = memstart |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[2].iwin_base_hi = 0;
} else {
sc->sc_iwin[2].iwin_base_lo = 0;
sc->sc_iwin[2].iwin_base_hi = 0;
}
sc->sc_iwin[2].iwin_xlate = memstart;
sc->sc_iwin[2].iwin_size = memsize;
if (sc->sc_is_host) {
sc->sc_iwin[3].iwin_base_lo = 0 |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
} else {
sc->sc_iwin[3].iwin_base_lo = 0;
}
sc->sc_iwin[3].iwin_base_hi = 0;
sc->sc_iwin[3].iwin_xlate = 0;
sc->sc_iwin[3].iwin_size = 0;
/*
* We set up the Outbound Windows as follows:
*
* 0 Access to private PCI space.
*
* 1 Unused.
*/
sc->sc_owin[0].owin_xlate_lo =
PCI_MAPREG_MEM_ADDR(sc->sc_iwin[1].iwin_base_lo);
sc->sc_owin[0].owin_xlate_hi = sc->sc_iwin[1].iwin_base_hi;
/*
* Set the Secondary Outbound I/O window to map
* to PCI address 0 for all 64K of the I/O space.
*/
sc->sc_ioout_xlate = 0;
sc->sc_ioout_xlate_offset = 0x1000;
/*
* Initialize the interrupt part of our PCI chipset tag.
*/
hdlg_pci_init(&sc->sc_pci_chipset, sc);
i80321_attach(sc);
}