/* $Id: imx23_olinuxino_machdep.c,v 1.15 2023/04/21 14:58:35 skrll Exp $ */
/*
* Copyright (c) 2012 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Petri Laakso.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "opt_arm_debug.h"
#include "opt_imx.h"
#include <sys/bus.h>
#include <sys/cdefs.h>
#include <sys/device.h>
#include <sys/mount.h>
#include <sys/reboot.h>
#include <sys/systm.h>
#include <sys/termios.h>
#include <sys/types.h>
#include <uvm/uvm_prot.h>
#include <machine/bootconfig.h>
#include <machine/db_machdep.h>
#include <machine/pmap.h>
#include <arm/armreg.h>
#include <arm/cpu.h>
#include <arm/cpufunc.h>
#include <arm/locore.h>
#include <arm/arm32/machdep.h>
#include <arm/arm32/pte.h>
#include <arm/imx/imx23_clkctrlreg.h>
#include <arm/imx/imx23_digctlreg.h>
#include <arm/imx/imx23_rtcreg.h>
#include <arm/imx/imx23_uartdbgreg.h>
#include <arm/imx/imx23var.h>
#include "plcom.h"
#if (NPLCOM > 0)
#include <evbarm/dev/plcomreg.h>
#include <evbarm/dev/plcomvar.h>
#endif
#include "opt_evbarm_boardtype.h"
#include "opt_machdep.h"
#define KERNEL_VM_BASE (KERNEL_BASE + 0x8000000)
#define KERNEL_VM_SIZE 0x20000000
#define L1_PAGE_TABLE (DRAM_BASE + MEMSIZE * 1024 * 1024 - L1_TABLE_SIZE)
#define BOOTIMX23_ARGS (L1_PAGE_TABLE - MAX_BOOT_STRING - 1)
#define PLCONMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) /* 8N1 */
#define PLCONSPEED 115200
#define REG_RD(reg) *(volatile uint32_t *)(reg)
#define REG_WR(reg, val) \
do { \
*(volatile uint32_t *)((reg)) = val; \
} while (0)
#define KERNEL_BASE_PHYS ((paddr_t)&KERNEL_BASE_phys)
#define KERNEL_BASE_VIRT ((vaddr_t)&KERNEL_BASE_virt)
/*
* Static device map for i.MX23 peripheral address space.
*/
static const struct pmap_devmap devmap[] = {
DEVMAP_ENTRY(
APBH_BASE, /* Virtual address. */
APBH_BASE, /* Physical address. */
APBH_SIZE + APBX_SIZE /* APBX located after APBH. */
),
DEVMAP_ENTRY_END
};
static struct plcom_instance imx23_pi = {
.pi_type = PLCOM_TYPE_PL011,
.pi_iot = &imx23_bus_space,
.pi_size = PL011COM_UART_SIZE,
.pi_iobase = HW_UARTDBG_BASE
};
extern char KERNEL_BASE_phys;
extern char KERNEL_BASE_virt;
BootConfig bootconfig;
char *boot_args;
static char kernel_boot_args[MAX_BOOT_STRING];
#define SSP_DIV 2
#define IO_FRAC 27
static void power_vddio_from_dcdc(int, int);
static void set_ssp_div(unsigned int);
static void set_io_frac(unsigned int);
static void bypass_ssp(void);
/*
* Initialize ARM and return new SVC stack pointer.
*/
vaddr_t
initarm(void *arg)
{
psize_t ram_size;
if (set_cpufuncs())
panic("set_cpufuncs failed");
kern_vtopdiff = KERNEL_BASE - KERNEL_BASE_PHYS;
pmap_devmap_register(devmap);
consinit();
#define BDSTR(s) _BDSTR(s)
#define _BDSTR(s) #s
printf("\nNetBSD/evbarm (" BDSTR(EVBARM_BOARDTYPE) ") booting ...\n");
#undef BDSTR
#undef _BDSTR
/*
* SSP_CLK setup was postponed here from bootimx23 because SB wasn't
* able to load kernel if clocks were changed.
*/
power_vddio_from_dcdc(3300, 2925);
set_ssp_div(SSP_DIV);
set_io_frac(IO_FRAC);
bypass_ssp();
cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT);
/* Copy boot arguments passed from bootimx23. */
boot_args = (char *)KERN_PHYSTOV(BOOTIMX23_ARGS);
memcpy(kernel_boot_args, boot_args, MAX_BOOT_STRING);
#ifdef BOOT_ARGS
strcpy(kernel_boot_args, BOOT_ARGS);
#endif
boot_args = kernel_boot_args;
#ifdef VERBOSE_INIT_ARM
printf("boot_args @ %lx: '%s'\n", KERN_PHYSTOV(BOOTIMX23_ARGS),
boot_args);
#endif
parse_mi_bootargs(boot_args);
ram_size = MEMSIZE * 1024 * 1024;
bootconfig.dramblocks = 1;
bootconfig.dram[0].address = DRAM_BASE;
bootconfig.dram[0].pages = ram_size / PAGE_SIZE;
bootconfig.dram[0].flags = BOOT_DRAM_CAN_DMA;
arm32_bootmem_init(bootconfig.dram[0].address, ram_size,
((vsize_t)&KERNEL_BASE_phys));
arm32_kernel_vm_init(KERNEL_VM_BASE, ARM_VECTORS_HIGH, 0, devmap,
false);
return initarm_common(KERNEL_VM_BASE, KERNEL_VM_SIZE, NULL, 0);
}
/*
* Initialize console.
*/
void
consinit(void)
{
/* consinit() is called from also from the main(). */
static int consinit_called = 0;
if (consinit_called)
return;
plcomcnattach(&imx23_pi, PLCONSPEED, IMX23_UART_CLK, PLCONMODE, 0);
consinit_called = 1;
return;
}
/*
* Reboot or halt the system.
*/
void
cpu_reboot(int howto, char *bootstr)
{
static int cpu_reboot_called = 0;
boothowto |= howto;
/*
* If this is the first invocation of cpu_reboot() and the RB_NOSYNC
* flag is not set in howto; sync and unmount the system disks by
* calling vfs_shutdown(9) and set the time of day clock by calling
* resettodr(9).
*/
if (!cpu_reboot_called && !(boothowto & RB_NOSYNC)) {
vfs_shutdown();
resettodr();
}
cpu_reboot_called = 1;
IRQdisable; /* FIQ's stays on because they are special. */
/*
* If rebooting after a crash (i.e., if RB_DUMP is set in howto, but
* RB_HALT is not), save a system crash dump.
*/
if ((boothowto & RB_DUMP) && !(boothowto & RB_HALT)) {
panic("please implement crash dump!"); // XXX
for(;;);
/* NOTREACHED */
}
/* Run any shutdown hooks by calling pmf_system_shutdown(9). */
pmf_system_shutdown(boothowto);
printf("system %s.\n", boothowto & RB_HALT ? "halted" : "rebooted");
if (boothowto & RB_HALT) {
/* Enable i.MX233 wait-for-interrupt mode. */
REG_WR(HW_CLKCTRL_BASE + HW_CLKCTRL_CPU,
(REG_RD(HW_CLKCTRL_BASE + HW_CLKCTRL_CPU) |
HW_CLKCTRL_CPU_INTERRUPT_WAIT));
/* Disable FIQ's and wait for interrupt (which never arrives) */
__asm volatile( \
"mrs r0, cpsr\n\t" \
"orr r0, #0x40\n\t" \
"msr cpsr_c, r0\n\t" \
"mov r0, #0\n\t" \
"mcr p15, 0, r0, c7, c0, 4\n\t"
);
for(;;);
/* NOT REACHED */
}
/* Reboot the system. */
REG_WR(HW_RTC_BASE + HW_RTC_WATCHDOG, 10000);
REG_WR(HW_RTC_BASE + HW_RTC_CTRL_SET, HW_RTC_CTRL_WATCHDOGEN);
REG_WR(HW_RTC_BASE + HW_RTC_WATCHDOG, 0);
for(;;);
/* NOT REACHED */
}
/*
* Delay us microseconds.
*/
void
delay(unsigned int us)
{
uint32_t start;
uint32_t now;
uint32_t elapsed;
uint32_t total;
uint32_t last;
total = 0;
last = 0;
start = REG_RD(HW_DIGCTL_BASE + HW_DIGCTL_MICROSECONDS);
do {
now = REG_RD(HW_DIGCTL_BASE + HW_DIGCTL_MICROSECONDS);
if (start <= now)
elapsed = now - start;
else /* Take care of overflow. */
elapsed = (UINT32_MAX - start) + 1 + now;
total += elapsed - last;
last = elapsed;
} while (total < us);
return;
}
#include <arm/imx/imx23_powerreg.h>
#define PWR_VDDIOCTRL (HW_POWER_BASE + HW_POWER_VDDIOCTRL)
#define PWR_CTRL (HW_POWER_BASE + HW_POWER_CTRL)
#define PWR_CTRL_S (HW_POWER_BASE + HW_POWER_CTRL_SET)
#define PWR_CTRL_C (HW_POWER_BASE + HW_POWER_CTRL_CLR)
static void
power_vddio_from_dcdc(int target, int brownout)
{
uint32_t tmp_r;
/* BO_OFFSET must be within 2700mV - 3475mV */
if (brownout > 3475)
brownout = 3475;
else if (brownout < 2700)
brownout = 2700;
/* Set LINREG_OFFSET one step below TRG. */
tmp_r = REG_RD(PWR_VDDIOCTRL);
tmp_r &= ~HW_POWER_VDDIOCTRL_LINREG_OFFSET;
tmp_r |= __SHIFTIN(2, HW_POWER_VDDIOCTRL_LINREG_OFFSET);
REG_WR(PWR_VDDIOCTRL, tmp_r);
delay(10000);
/* Enable VDDIO switching converter output. */
tmp_r = REG_RD(PWR_VDDIOCTRL);
tmp_r &= ~HW_POWER_VDDIOCTRL_DISABLE_FET;
REG_WR(PWR_VDDIOCTRL, tmp_r);
delay(10000);
/* Set target voltage and brownout level. */
tmp_r = REG_RD(PWR_VDDIOCTRL);
tmp_r &= ~(HW_POWER_VDDIOCTRL_BO_OFFSET | HW_POWER_VDDIOCTRL_TRG);
tmp_r |= __SHIFTIN(((target - brownout) / 25),
HW_POWER_VDDIOCTRL_BO_OFFSET);
tmp_r |= __SHIFTIN(((target - 2800) / 25), HW_POWER_VDDIOCTRL_TRG);
REG_WR(PWR_VDDIOCTRL, tmp_r);
delay(10000);
/* Enable PWDN_BRNOUT. */
REG_WR(PWR_CTRL_C, HW_POWER_CTRL_VDDIO_BO_IRQ);
tmp_r = REG_RD(PWR_VDDIOCTRL);
tmp_r |= HW_POWER_VDDIOCTRL_PWDN_BRNOUT;
REG_WR(PWR_VDDIOCTRL, tmp_r);
return;
}
#include <arm/imx/imx23_clkctrlreg.h>
#define CLKCTRL_SSP (HW_CLKCTRL_BASE + HW_CLKCTRL_SSP)
#define CLKCTRL_FRAC (HW_CLKCTRL_BASE + HW_CLKCTRL_FRAC)
#define CLKCTRL_SEQ_C (HW_CLKCTRL_BASE + HW_CLKCTRL_CLKSEQ_CLR)
static
void set_ssp_div(unsigned int div)
{
uint32_t tmp_r;
tmp_r = REG_RD(CLKCTRL_SSP);
tmp_r &= ~HW_CLKCTRL_SSP_CLKGATE;
REG_WR(CLKCTRL_SSP, tmp_r);
while (REG_RD(CLKCTRL_SSP) & HW_CLKCTRL_SSP_BUSY)
;
tmp_r = REG_RD(CLKCTRL_SSP);
tmp_r &= ~HW_CLKCTRL_SSP_DIV;
tmp_r |= __SHIFTIN(div, HW_CLKCTRL_SSP_DIV);
REG_WR(CLKCTRL_SSP, tmp_r);
while (REG_RD(CLKCTRL_SSP) & HW_CLKCTRL_SSP_BUSY)
;
return;
}
static
void set_io_frac(unsigned int frac)
{
uint8_t *io_frac;
uint32_t tmp_r;
io_frac = (uint8_t *)(CLKCTRL_FRAC);
io_frac++; /* emi */
io_frac++; /* pix */
io_frac++; /* io */
tmp_r = (*io_frac)<<24;
tmp_r &= ~(HW_CLKCTRL_FRAC_CLKGATEIO | HW_CLKCTRL_FRAC_IOFRAC);
tmp_r |= __SHIFTIN(frac, HW_CLKCTRL_FRAC_IOFRAC);
*io_frac = (uint8_t)(tmp_r>>24);
return;
}
static
void bypass_ssp(void)
{
REG_WR(CLKCTRL_SEQ_C, HW_CLKCTRL_CLKSEQ_BYPASS_SSP);
return;
}