/* $NetBSD: mq200.c,v 1.36 2022/05/28 15:57:18 andvar Exp $ */
/*-
* Copyright (c) 2000, 2001 TAKEMURA Shin
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: mq200.c,v 1.36 2022/05/28 15:57:18 andvar Exp $");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/device.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/reboot.h>
#include <uvm/uvm_extern.h>
#include <dev/wscons/wsconsio.h>
#include <mips/locore.h>
#include <machine/bootinfo.h>
#include <machine/autoconf.h>
#include <machine/config_hook.h>
#include <machine/platid.h>
#include <machine/platid_mask.h>
#include "opt_mq200.h"
#include <hpcmips/dev/mq200reg.h>
#include <hpcmips/dev/mq200var.h>
#include <hpcmips/dev/mq200priv.h>
#include "bivideo.h"
#if NBIVIDEO > 0
#include <dev/hpc/bivideovar.h>
#endif
/*
* function prototypes
*/
static void mq200_power(int, void *);
static int mq200_hardpower(void *, int, long, void *);
static int mq200_fbinit(struct hpcfb_fbconf *);
static int mq200_ioctl(void *, u_long, void *, int, struct lwp *);
static paddr_t mq200_mmap(void *, off_t offset, int);
static void mq200_update_powerstate(struct mq200_softc *, int);
void mq200_init_backlight(struct mq200_softc *, int);
void mq200_init_brightness(struct mq200_softc *, int);
void mq200_init_contrast(struct mq200_softc *, int);
void mq200_set_brightness(struct mq200_softc *, int);
void mq200_set_contrast(struct mq200_softc *, int);
/*
* static variables
*/
struct hpcfb_accessops mq200_ha = {
mq200_ioctl, mq200_mmap
};
#ifdef MQ200_DEBUG
int mq200_debug = MQ200DEBUG_CONF;
#endif
int
mq200_probe(bus_space_tag_t iot, bus_space_handle_t ioh)
{
unsigned long regval;
#if NBIVIDEO > 0
if (bivideo_dont_attach) /* some video driver already attached */
return (0);
#endif /* NBIVIDEO > 0 */
regval = bus_space_read_4(iot, ioh, MQ200_PC00R);
VPRINTF("probe: vendor id=%04lx product id=%04lx\n",
regval & 0xffff, (regval >> 16) & 0xffff);
if (regval != ((MQ200_PRODUCT_ID << 16) | MQ200_VENDOR_ID))
return (0);
return (1);
}
void
mq200_attach(struct mq200_softc *sc)
{
unsigned long regval;
struct hpcfb_attach_args ha;
int console = (bootinfo->bi_cnuse & BI_CNUSE_SERIAL) ? 0 : 1;
printf(": ");
if (mq200_fbinit(&sc->sc_fbconf) != 0) {
/* just return so that hpcfb will not be attached */
return;
}
sc->sc_fbconf.hf_baseaddr = (u_long)bootinfo->fb_addr;
sc->sc_fbconf.hf_offset = (u_long)sc->sc_fbconf.hf_baseaddr -
MIPS_PHYS_TO_KSEG1(mips_ptob(mips_btop(sc->sc_baseaddr)));
DPRINTF("hf_baseaddr=%lx\n", sc->sc_fbconf.hf_baseaddr);
DPRINTF("hf_offset=%lx\n", sc->sc_fbconf.hf_offset);
regval = mq200_read(sc, MQ200_PC08R);
printf("MQ200 Rev.%02lx video controller", regval & 0xff);
if (console) {
printf(", console");
}
printf("\n");
printf("%s: framebuffer address: 0x%08lx\n",
device_xname(sc->sc_dev), (u_long)bootinfo->fb_addr);
/*
* setup registers
*/
sc->sc_flags = 0;
sc->sc_baseclock = 12288; /* 12.288 MHz */
#ifdef MQ200_DEBUG
if (bootverbose) {
/* dump current setting */
mq200_dump_all(sc);
mq200_dump_pll(sc);
}
#endif
mq200_setup_regctx(sc);
mq200_mdsetup(sc);
if (sc->sc_md) {
int mode;
switch (sc->sc_fbconf.hf_pixel_width) {
case 1: mode = MQ200_GCC_1BPP; break;
case 2: mode = MQ200_GCC_2BPP; break;
case 4: mode = MQ200_GCC_4BPP; break;
case 8: mode = MQ200_GCC_8BPP; break;
case 16: mode = MQ200_GCC_16BPP_DIRECT; break;
default:
printf("%s: %dbpp isn't supported\n",
device_xname(sc->sc_dev), sc->sc_fbconf.hf_pixel_width);
return;
}
if (sc->sc_md->md_flags & MQ200_MD_HAVEFP) {
sc->sc_flags |= MQ200_SC_GC2_ENABLE; /* FP */
}
#if MQ200_USECRT
if (sc->sc_md->md_flags & MQ200_MD_HAVECRT) {
int i;
sc->sc_flags |= MQ200_SC_GC1_ENABLE; /* CRT */
for (i = 0; i < mq200_crt_nparams; i++) {
sc->sc_crt = &mq200_crt_params[i];
if (sc->sc_md->md_fp_width <=
mq200_crt_params[i].width &&
sc->sc_md->md_fp_height <=
mq200_crt_params[i].height)
break;
}
}
#endif
mq200_setup(sc);
if (sc->sc_flags & MQ200_SC_GC2_ENABLE) /* FP */
mq200_win_enable(sc, MQ200_GC2, mode,
sc->sc_fbconf.hf_baseaddr,
sc->sc_fbconf.hf_width, sc->sc_fbconf.hf_height,
sc->sc_fbconf.hf_bytes_per_plane);
if (sc->sc_flags & MQ200_SC_GC1_ENABLE) /* CRT */
mq200_win_enable(sc, MQ200_GC1, mode,
sc->sc_fbconf.hf_baseaddr,
sc->sc_fbconf.hf_width, sc->sc_fbconf.hf_height,
sc->sc_fbconf.hf_bytes_per_plane);
}
#ifdef MQ200_DEBUG
if (sc->sc_md == NULL || bootverbose) {
mq200_dump_pll(sc);
}
#endif
/* Add a power hook to power saving */
sc->sc_mq200pwstate = MQ200_POWERSTATE_D0;
sc->sc_powerhook = powerhook_establish(device_xname(sc->sc_dev),
mq200_power, sc);
if (sc->sc_powerhook == NULL)
printf("%s: WARNING: unable to establish power hook\n",
device_xname(sc->sc_dev));
/* Add a hard power hook to power saving */
sc->sc_hardpowerhook = config_hook(CONFIG_HOOK_PMEVENT,
CONFIG_HOOK_PMEVENT_HARDPOWER,
CONFIG_HOOK_SHARE,
mq200_hardpower, sc);
if (sc->sc_hardpowerhook == NULL)
printf("%s: WARNING: unable to establish hard power hook\n",
device_xname(sc->sc_dev));
/* initialize backlight brightness and lcd contrast */
sc->sc_lcd_inited = 0;
mq200_init_brightness(sc, 1);
mq200_init_contrast(sc, 1);
mq200_init_backlight(sc, 1);
if (console && hpcfb_cnattach(&sc->sc_fbconf) != 0) {
panic("mq200_attach: can't init fb console");
}
ha.ha_console = console;
ha.ha_accessops = &mq200_ha;
ha.ha_accessctx = sc;
ha.ha_curfbconf = 0;
ha.ha_nfbconf = 1;
ha.ha_fbconflist = &sc->sc_fbconf;
ha.ha_curdspconf = 0;
ha.ha_ndspconf = 1;
ha.ha_dspconflist = &sc->sc_dspconf;
config_found(sc->sc_dev, &ha, hpcfbprint, CFARGS_NONE);
#if NBIVIDEO > 0
/*
* bivideo is no longer need
*/
bivideo_dont_attach = 1;
#endif /* NBIVIDEO > 0 */
}
static void
mq200_update_powerstate(struct mq200_softc *sc, int updates)
{
if (updates & PWRSTAT_LCD)
config_hook_call(CONFIG_HOOK_POWERCONTROL,
CONFIG_HOOK_POWERCONTROL_LCD,
(void*)!(sc->sc_powerstate &
(PWRSTAT_VIDEOOFF|PWRSTAT_SUSPEND)));
if (updates & PWRSTAT_BACKLIGHT)
config_hook_call(CONFIG_HOOK_POWERCONTROL,
CONFIG_HOOK_POWERCONTROL_LCDLIGHT,
(void*)(!(sc->sc_powerstate &
(PWRSTAT_VIDEOOFF|PWRSTAT_SUSPEND)) &&
(sc->sc_powerstate & PWRSTAT_BACKLIGHT)));
}
static void
mq200_power(int why, void *arg)
{
struct mq200_softc *sc = arg;
switch (why) {
case PWR_SUSPEND:
sc->sc_powerstate |= PWRSTAT_SUSPEND;
mq200_update_powerstate(sc, PWRSTAT_ALL);
break;
case PWR_STANDBY:
sc->sc_powerstate |= PWRSTAT_SUSPEND;
mq200_update_powerstate(sc, PWRSTAT_ALL);
break;
case PWR_RESUME:
sc->sc_powerstate &= ~PWRSTAT_SUSPEND;
mq200_update_powerstate(sc, PWRSTAT_ALL);
break;
}
}
static int
mq200_hardpower(void *ctx, int type, long id, void *msg)
{
struct mq200_softc *sc = ctx;
int why = (int)msg;
switch (why) {
case PWR_SUSPEND:
sc->sc_mq200pwstate = MQ200_POWERSTATE_D2;
break;
case PWR_STANDBY:
sc->sc_mq200pwstate = MQ200_POWERSTATE_D3;
break;
case PWR_RESUME:
sc->sc_mq200pwstate = MQ200_POWERSTATE_D0;
break;
}
bus_space_write_4(sc->sc_iot, sc->sc_ioh,
MQ200_PMCSR, sc->sc_mq200pwstate);
/*
* you should wait until the
* power state transit sequence will end.
*/
{
unsigned long tmp;
do {
tmp = bus_space_read_4(sc->sc_iot, sc->sc_ioh,
MQ200_PMCSR);
} while ((tmp & 0x3) != (sc->sc_mq200pwstate & 0x3));
delay(100000); /* XXX */
}
return (0);
}
static int
mq200_fbinit(struct hpcfb_fbconf *fb)
{
/*
* get fb settings from bootinfo
*/
if (bootinfo == NULL ||
bootinfo->fb_addr == 0 ||
bootinfo->fb_line_bytes == 0 ||
bootinfo->fb_width == 0 ||
bootinfo->fb_height == 0) {
printf("no frame buffer information.\n");
return (-1);
}
/* zero fill */
memset(fb, 0, sizeof(*fb));
fb->hf_conf_index = 0; /* configuration index */
fb->hf_nconfs = 1; /* how many configurations */
strcpy(fb->hf_name, "built-in video");
/* frame buffer name */
strcpy(fb->hf_conf_name, "default");
/* configuration name */
fb->hf_height = bootinfo->fb_height;
fb->hf_width = bootinfo->fb_width;
fb->hf_baseaddr = mips_ptob(mips_btop(bootinfo->fb_addr));
fb->hf_offset = (u_long)bootinfo->fb_addr - fb->hf_baseaddr;
/* frame buffer start offset */
fb->hf_bytes_per_line = bootinfo->fb_line_bytes;
fb->hf_nplanes = 1;
fb->hf_bytes_per_plane = bootinfo->fb_height *
bootinfo->fb_line_bytes;
fb->hf_access_flags |= HPCFB_ACCESS_BYTE;
fb->hf_access_flags |= HPCFB_ACCESS_WORD;
fb->hf_access_flags |= HPCFB_ACCESS_DWORD;
switch (bootinfo->fb_type) {
/*
* monochrome
*/
case BIFB_D1_M2L_1:
fb->hf_access_flags |= HPCFB_ACCESS_REVERSE;
/* fall through */
case BIFB_D1_M2L_0:
fb->hf_class = HPCFB_CLASS_GRAYSCALE;
fb->hf_access_flags |= HPCFB_ACCESS_STATIC;
fb->hf_pack_width = 8;
fb->hf_pixels_per_pack = 8;
fb->hf_pixel_width = 1;
fb->hf_class_data_length = sizeof(struct hf_gray_tag);
fb->hf_u.hf_gray.hf_flags = 0; /* reserved for future use */
break;
/*
* gray scale
*/
case BIFB_D2_M2L_3:
case BIFB_D2_M2L_3x2:
fb->hf_access_flags |= HPCFB_ACCESS_REVERSE;
/* fall through */
case BIFB_D2_M2L_0:
case BIFB_D2_M2L_0x2:
fb->hf_class = HPCFB_CLASS_GRAYSCALE;
fb->hf_access_flags |= HPCFB_ACCESS_STATIC;
fb->hf_pack_width = 8;
fb->hf_pixels_per_pack = 4;
fb->hf_pixel_width = 2;
fb->hf_class_data_length = sizeof(struct hf_gray_tag);
fb->hf_u.hf_gray.hf_flags = 0; /* reserved for future use */
break;
case BIFB_D4_M2L_F:
case BIFB_D4_M2L_Fx2:
fb->hf_access_flags |= HPCFB_ACCESS_REVERSE;
/* fall through */
case BIFB_D4_M2L_0:
case BIFB_D4_M2L_0x2:
fb->hf_class = HPCFB_CLASS_GRAYSCALE;
fb->hf_access_flags |= HPCFB_ACCESS_STATIC;
fb->hf_pack_width = 8;
fb->hf_pixels_per_pack = 2;
fb->hf_pixel_width = 4;
fb->hf_class_data_length = sizeof(struct hf_gray_tag);
fb->hf_u.hf_gray.hf_flags = 0; /* reserved for future use */
break;
/*
* indexed color
*/
case BIFB_D8_FF:
fb->hf_access_flags |= HPCFB_ACCESS_REVERSE;
/* fall through */
case BIFB_D8_00:
fb->hf_class = HPCFB_CLASS_INDEXCOLOR;
fb->hf_access_flags |= HPCFB_ACCESS_STATIC;
fb->hf_pack_width = 8;
fb->hf_pixels_per_pack = 1;
fb->hf_pixel_width = 8;
fb->hf_class_data_length = sizeof(struct hf_indexed_tag);
fb->hf_u.hf_indexed.hf_flags = 0; /* reserved for future use */
break;
/*
* RGB color
*/
case BIFB_D16_FFFF:
fb->hf_access_flags |= HPCFB_ACCESS_REVERSE;
/* fall through */
case BIFB_D16_0000:
fb->hf_class = HPCFB_CLASS_RGBCOLOR;
fb->hf_access_flags |= HPCFB_ACCESS_STATIC;
fb->hf_order_flags = HPCFB_REVORDER_BYTE;
fb->hf_pack_width = 16;
fb->hf_pixels_per_pack = 1;
fb->hf_pixel_width = 16;
fb->hf_class_data_length = sizeof(struct hf_rgb_tag);
fb->hf_u.hf_rgb.hf_flags = 0; /* reserved for future use */
fb->hf_u.hf_rgb.hf_red_width = 5;
fb->hf_u.hf_rgb.hf_red_shift = 11;
fb->hf_u.hf_rgb.hf_green_width = 6;
fb->hf_u.hf_rgb.hf_green_shift = 5;
fb->hf_u.hf_rgb.hf_blue_width = 5;
fb->hf_u.hf_rgb.hf_blue_shift = 0;
fb->hf_u.hf_rgb.hf_alpha_width = 0;
fb->hf_u.hf_rgb.hf_alpha_shift = 0;
break;
default:
printf("unknown type (=%d).\n", bootinfo->fb_type);
return (-1);
break;
}
return (0); /* no error */
}
int
mq200_ioctl(void *v, u_long cmd, void *data, int flag, struct lwp *l)
{
struct mq200_softc *sc = (struct mq200_softc *)v;
struct hpcfb_fbconf *fbconf;
struct hpcfb_dspconf *dspconf;
struct wsdisplay_cmap *cmap;
struct wsdisplay_param *dispparam;
switch (cmd) {
case WSDISPLAYIO_GETCMAP:
cmap = (struct wsdisplay_cmap *)data;
if (sc->sc_fbconf.hf_class != HPCFB_CLASS_INDEXCOLOR ||
sc->sc_fbconf.hf_pack_width != 8 ||
256 <= cmap->index ||
256 - cmap->index < cmap->count)
return (EINVAL);
/*
* This driver can't get color map.
*/
return (EINVAL);
case WSDISPLAYIO_PUTCMAP:
/*
* This driver can't set color map.
*/
return (EINVAL);
case WSDISPLAYIO_SVIDEO:
if (*(int *)data == WSDISPLAYIO_VIDEO_OFF)
sc->sc_powerstate |= PWRSTAT_VIDEOOFF;
else
sc->sc_powerstate &= ~PWRSTAT_VIDEOOFF;
mq200_update_powerstate(sc, PWRSTAT_ALL);
return 0;
case WSDISPLAYIO_GVIDEO:
*(int *)data = (sc->sc_powerstate&PWRSTAT_VIDEOOFF) ?
WSDISPLAYIO_VIDEO_OFF:WSDISPLAYIO_VIDEO_ON;
return 0;
case WSDISPLAYIO_GETPARAM:
dispparam = (struct wsdisplay_param*)data;
switch (dispparam->param) {
case WSDISPLAYIO_PARAM_BACKLIGHT:
VPRINTF("ioctl: GET:BACKLIGHT\n");
mq200_init_brightness(sc, 0);
mq200_init_backlight(sc, 0);
VPRINTF("ioctl: GET:(real)BACKLIGHT %d\n",
(sc->sc_powerstate&PWRSTAT_BACKLIGHT)? 1: 0);
dispparam->min = 0;
dispparam->max = 1;
if (sc->sc_max_brightness > 0)
dispparam->curval = sc->sc_brightness > 0
? 1: 0;
else
dispparam->curval =
(sc->sc_powerstate&PWRSTAT_BACKLIGHT)
? 1: 0;
VPRINTF("ioctl: GET:BACKLIGHT:%d(%s)\n",
dispparam->curval,
sc->sc_max_brightness > 0? "brightness": "light");
return 0;
break;
case WSDISPLAYIO_PARAM_CONTRAST:
VPRINTF("ioctl: GET:CONTRAST\n");
mq200_init_contrast(sc, 0);
if (sc->sc_max_contrast > 0) {
dispparam->min = 0;
dispparam->max = sc->sc_max_contrast;
dispparam->curval = sc->sc_contrast;
VPRINTF("ioctl: GET:CONTRAST"
" max=%d, current=%d\n",
sc->sc_max_contrast, sc->sc_contrast);
return 0;
} else {
VPRINTF("ioctl: GET:CONTRAST EINVAL\n");
return (EINVAL);
}
break;
case WSDISPLAYIO_PARAM_BRIGHTNESS:
VPRINTF("ioctl: GET:BRIGHTNESS\n");
mq200_init_brightness(sc, 0);
if (sc->sc_max_brightness > 0) {
dispparam->min = 0;
dispparam->max = sc->sc_max_brightness;
dispparam->curval = sc->sc_brightness;
VPRINTF("ioctl: GET:BRIGHTNESS"
" max=%d, current=%d\n",
sc->sc_max_brightness, sc->sc_brightness);
return 0;
} else {
VPRINTF("ioctl: GET:BRIGHTNESS EINVAL\n");
return (EINVAL);
}
return (EINVAL);
default:
return (EINVAL);
}
return (0);
case WSDISPLAYIO_SETPARAM:
dispparam = (struct wsdisplay_param*)data;
switch (dispparam->param) {
case WSDISPLAYIO_PARAM_BACKLIGHT:
VPRINTF("ioctl: SET:BACKLIGHT\n");
if (dispparam->curval < 0 ||
1 < dispparam->curval)
return (EINVAL);
mq200_init_brightness(sc, 0);
VPRINTF("ioctl: SET:max brightness=%d\n",
sc->sc_max_brightness);
if (sc->sc_max_brightness > 0) { /* dimmer */
if (dispparam->curval == 0){
sc->sc_brightness_save =
sc->sc_brightness;
mq200_set_brightness(sc, 0); /* min */
} else {
if (sc->sc_brightness_save == 0)
sc->sc_brightness_save =
sc->sc_max_brightness;
mq200_set_brightness(sc,
sc->sc_brightness_save);
}
VPRINTF("ioctl: SET:BACKLIGHT:"
" brightness=%d\n", sc->sc_brightness);
} else { /* off */
if (dispparam->curval == 0)
sc->sc_powerstate &= ~PWRSTAT_BACKLIGHT;
else
sc->sc_powerstate |= PWRSTAT_BACKLIGHT;
VPRINTF("ioctl: SET:BACKLIGHT:"
" powerstate %d\n",
(sc->sc_powerstate & PWRSTAT_BACKLIGHT)
? 1 : 0);
mq200_update_powerstate(sc, PWRSTAT_BACKLIGHT);
VPRINTF("ioctl: SET:BACKLIGHT:%d\n",
(sc->sc_powerstate & PWRSTAT_BACKLIGHT)
? 1 : 0);
}
return 0;
break;
case WSDISPLAYIO_PARAM_CONTRAST:
VPRINTF("ioctl: SET:CONTRAST\n");
mq200_init_contrast(sc, 0);
if (dispparam->curval < 0 ||
sc->sc_max_contrast < dispparam->curval)
return (EINVAL);
if (sc->sc_max_contrast > 0) {
int org = sc->sc_contrast;
mq200_set_contrast(sc, dispparam->curval);
VPRINTF("ioctl: SET:CONTRAST"
" org=%d, current=%d\n", org,
sc->sc_contrast);
VPRINTF("ioctl: SETPARAM:"
" CONTRAST org=%d, current=%d\n", org,
sc->sc_contrast);
return 0;
} else {
VPRINTF("ioctl: SET:CONTRAST EINVAL\n");
return (EINVAL);
}
break;
case WSDISPLAYIO_PARAM_BRIGHTNESS:
VPRINTF("ioctl: SET:BRIGHTNESS\n");
mq200_init_brightness(sc, 0);
if (dispparam->curval < 0 ||
sc->sc_max_brightness < dispparam->curval)
return (EINVAL);
if (sc->sc_max_brightness > 0) {
int org = sc->sc_brightness;
mq200_set_brightness(sc, dispparam->curval);
VPRINTF("ioctl: SET:BRIGHTNESS"
" org=%d, current=%d\n", org,
sc->sc_brightness);
return 0;
} else {
VPRINTF("ioctl: SET:BRIGHTNESS EINVAL\n");
return (EINVAL);
}
break;
default:
return (EINVAL);
}
return (0);
case HPCFBIO_GCONF:
fbconf = (struct hpcfb_fbconf *)data;
if (fbconf->hf_conf_index != 0 &&
fbconf->hf_conf_index != HPCFB_CURRENT_CONFIG) {
return (EINVAL);
}
*fbconf = sc->sc_fbconf; /* structure assignment */
return (0);
case HPCFBIO_SCONF:
fbconf = (struct hpcfb_fbconf *)data;
if (fbconf->hf_conf_index != 0 &&
fbconf->hf_conf_index != HPCFB_CURRENT_CONFIG) {
return (EINVAL);
}
/*
* nothing to do because we have only one configuration
*/
return (0);
case HPCFBIO_GDSPCONF:
dspconf = (struct hpcfb_dspconf *)data;
if ((dspconf->hd_unit_index != 0 &&
dspconf->hd_unit_index != HPCFB_CURRENT_UNIT) ||
(dspconf->hd_conf_index != 0 &&
dspconf->hd_conf_index != HPCFB_CURRENT_CONFIG)) {
return (EINVAL);
}
*dspconf = sc->sc_dspconf; /* structure assignment */
return (0);
case HPCFBIO_SDSPCONF:
dspconf = (struct hpcfb_dspconf *)data;
if ((dspconf->hd_unit_index != 0 &&
dspconf->hd_unit_index != HPCFB_CURRENT_UNIT) ||
(dspconf->hd_conf_index != 0 &&
dspconf->hd_conf_index != HPCFB_CURRENT_CONFIG)) {
return (EINVAL);
}
/*
* nothing to do
* because we have only one unit and one configuration
*/
return (0);
case HPCFBIO_GOP:
case HPCFBIO_SOP:
/*
* currently not implemented...
*/
return (EINVAL);
}
return (EPASSTHROUGH);
}
paddr_t
mq200_mmap(void *ctx, off_t offset, int prot)
{
struct mq200_softc *sc = (struct mq200_softc *)ctx;
if (offset < 0 || MQ200_MAPSIZE <= offset)
return -1;
return mips_btop(sc->sc_baseaddr + offset);
}
void
mq200_init_backlight(struct mq200_softc *sc, int inattach)
{
int val = -1;
if (sc->sc_lcd_inited&BACKLIGHT_INITED)
return;
if (config_hook_call(CONFIG_HOOK_GET,
CONFIG_HOOK_POWER_LCDLIGHT, &val) != -1) {
/* we can get real light state */
VPRINTF("init_backlight: real backlight=%d\n", val);
if (val == 0)
sc->sc_powerstate &= ~PWRSTAT_BACKLIGHT;
else
sc->sc_powerstate |= PWRSTAT_BACKLIGHT;
sc->sc_lcd_inited |= BACKLIGHT_INITED;
} else if (inattach) {
/*
we cannot get real light state in attach time
because light device not yet attached.
we will retry in !inattach.
temporary assume light is on.
*/
sc->sc_powerstate |= PWRSTAT_BACKLIGHT;
} else {
/* we cannot get real light state, so work by myself state */
sc->sc_lcd_inited |= BACKLIGHT_INITED;
}
}
void
mq200_init_brightness(struct mq200_softc *sc, int inattach)
{
int val = -1;
if (sc->sc_lcd_inited&BRIGHTNESS_INITED)
return;
VPRINTF("init_brightness\n");
if (config_hook_call(CONFIG_HOOK_GET,
CONFIG_HOOK_BRIGHTNESS_MAX, &val) != -1) {
/* we can get real brightness max */
VPRINTF("init_brightness: real brightness max=%d\n", val);
sc->sc_max_brightness = val;
val = -1;
if (config_hook_call(CONFIG_HOOK_GET,
CONFIG_HOOK_BRIGHTNESS, &val) != -1) {
/* we can get real brightness */
VPRINTF("init_brightness: real brightness=%d\n", val);
sc->sc_brightness_save = sc->sc_brightness = val;
} else {
sc->sc_brightness_save =
sc->sc_brightness = sc->sc_max_brightness;
}
sc->sc_lcd_inited |= BRIGHTNESS_INITED;
} else if (inattach) {
/*
we cannot get real brightness in attach time
because brightness device not yet attached.
we will retry in !inattach.
*/
sc->sc_max_brightness = -1;
sc->sc_brightness = -1;
sc->sc_brightness_save = -1;
} else {
/* we cannot get real brightness */
sc->sc_lcd_inited |= BRIGHTNESS_INITED;
}
return;
}
void
mq200_init_contrast(struct mq200_softc *sc, int inattach)
{
int val = -1;
if (sc->sc_lcd_inited&CONTRAST_INITED)
return;
VPRINTF("init_contrast\n");
if (config_hook_call(CONFIG_HOOK_GET,
CONFIG_HOOK_CONTRAST_MAX, &val) != -1) {
/* we can get real contrast max */
VPRINTF("init_contrast: real contrast max=%d\n", val);
sc->sc_max_contrast = val;
val = -1;
if (config_hook_call(CONFIG_HOOK_GET,
CONFIG_HOOK_CONTRAST, &val) != -1) {
/* we can get real contrast */
VPRINTF("init_contrast: real contrast=%d\n", val);
sc->sc_contrast = val;
} else {
sc->sc_contrast = sc->sc_max_contrast;
}
sc->sc_lcd_inited |= CONTRAST_INITED;
} else if (inattach) {
/*
we cannot get real contrast in attach time
because contrast device not yet attached.
we will retry in !inattach.
*/
sc->sc_max_contrast = -1;
sc->sc_contrast = -1;
} else {
/* we cannot get real contrast */
sc->sc_lcd_inited |= CONTRAST_INITED;
}
return;
}
void
mq200_set_brightness(struct mq200_softc *sc, int val)
{
sc->sc_brightness = val;
config_hook_call(CONFIG_HOOK_SET, CONFIG_HOOK_BRIGHTNESS, &val);
if (config_hook_call(CONFIG_HOOK_GET,
CONFIG_HOOK_BRIGHTNESS, &val) != -1) {
sc->sc_brightness = val;
}
}
void
mq200_set_contrast(struct mq200_softc *sc, int val)
{
sc->sc_contrast = val;
config_hook_call(CONFIG_HOOK_SET, CONFIG_HOOK_CONTRAST, &val);
if (config_hook_call(CONFIG_HOOK_GET,
CONFIG_HOOK_CONTRAST, &val) != -1) {
sc->sc_contrast = val;
}
}