/* $NetBSD: intel_dsi_vbt.c,v 1.2 2021/12/18 23:45:30 riastradh Exp $ */
/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Shobhit Kumar <shobhit.kumar@intel.com>
*
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: intel_dsi_vbt.c,v 1.2 2021/12/18 23:45:30 riastradh Exp $");
#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/slab.h>
#include <asm/intel-mid.h>
#include <asm/unaligned.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/i915_drm.h>
#include <video/mipi_display.h>
#include "i915_drv.h"
#include "intel_display_types.h"
#include "intel_dsi.h"
#include "intel_sideband.h"
#define MIPI_TRANSFER_MODE_SHIFT 0
#define MIPI_VIRTUAL_CHANNEL_SHIFT 1
#define MIPI_PORT_SHIFT 3
/* base offsets for gpio pads */
#define VLV_GPIO_NC_0_HV_DDI0_HPD 0x4130
#define VLV_GPIO_NC_1_HV_DDI0_DDC_SDA 0x4120
#define VLV_GPIO_NC_2_HV_DDI0_DDC_SCL 0x4110
#define VLV_GPIO_NC_3_PANEL0_VDDEN 0x4140
#define VLV_GPIO_NC_4_PANEL0_BKLTEN 0x4150
#define VLV_GPIO_NC_5_PANEL0_BKLTCTL 0x4160
#define VLV_GPIO_NC_6_HV_DDI1_HPD 0x4180
#define VLV_GPIO_NC_7_HV_DDI1_DDC_SDA 0x4190
#define VLV_GPIO_NC_8_HV_DDI1_DDC_SCL 0x4170
#define VLV_GPIO_NC_9_PANEL1_VDDEN 0x4100
#define VLV_GPIO_NC_10_PANEL1_BKLTEN 0x40E0
#define VLV_GPIO_NC_11_PANEL1_BKLTCTL 0x40F0
#define VLV_GPIO_PCONF0(base_offset) (base_offset)
#define VLV_GPIO_PAD_VAL(base_offset) ((base_offset) + 8)
struct gpio_map {
u16 base_offset;
bool init;
};
static struct gpio_map vlv_gpio_table[] = {
{ VLV_GPIO_NC_0_HV_DDI0_HPD },
{ VLV_GPIO_NC_1_HV_DDI0_DDC_SDA },
{ VLV_GPIO_NC_2_HV_DDI0_DDC_SCL },
{ VLV_GPIO_NC_3_PANEL0_VDDEN },
{ VLV_GPIO_NC_4_PANEL0_BKLTEN },
{ VLV_GPIO_NC_5_PANEL0_BKLTCTL },
{ VLV_GPIO_NC_6_HV_DDI1_HPD },
{ VLV_GPIO_NC_7_HV_DDI1_DDC_SDA },
{ VLV_GPIO_NC_8_HV_DDI1_DDC_SCL },
{ VLV_GPIO_NC_9_PANEL1_VDDEN },
{ VLV_GPIO_NC_10_PANEL1_BKLTEN },
{ VLV_GPIO_NC_11_PANEL1_BKLTCTL },
};
struct i2c_adapter_lookup {
u16 slave_addr;
struct intel_dsi *intel_dsi;
acpi_handle dev_handle;
};
#define CHV_GPIO_IDX_START_N 0
#define CHV_GPIO_IDX_START_E 73
#define CHV_GPIO_IDX_START_SW 100
#define CHV_GPIO_IDX_START_SE 198
#define CHV_VBT_MAX_PINS_PER_FMLY 15
#define CHV_GPIO_PAD_CFG0(f, i) (0x4400 + (f) * 0x400 + (i) * 8)
#define CHV_GPIO_GPIOEN (1 << 15)
#define CHV_GPIO_GPIOCFG_GPIO (0 << 8)
#define CHV_GPIO_GPIOCFG_GPO (1 << 8)
#define CHV_GPIO_GPIOCFG_GPI (2 << 8)
#define CHV_GPIO_GPIOCFG_HIZ (3 << 8)
#define CHV_GPIO_GPIOTXSTATE(state) ((!!(state)) << 1)
#define CHV_GPIO_PAD_CFG1(f, i) (0x4400 + (f) * 0x400 + (i) * 8 + 4)
#define CHV_GPIO_CFGLOCK (1 << 31)
/* ICL DSI Display GPIO Pins */
#define ICL_GPIO_DDSP_HPD_A 0
#define ICL_GPIO_L_VDDEN_1 1
#define ICL_GPIO_L_BKLTEN_1 2
#define ICL_GPIO_DDPA_CTRLCLK_1 3
#define ICL_GPIO_DDPA_CTRLDATA_1 4
#define ICL_GPIO_DDSP_HPD_B 5
#define ICL_GPIO_L_VDDEN_2 6
#define ICL_GPIO_L_BKLTEN_2 7
#define ICL_GPIO_DDPA_CTRLCLK_2 8
#define ICL_GPIO_DDPA_CTRLDATA_2 9
static inline enum port intel_dsi_seq_port_to_port(u8 port)
{
return port ? PORT_C : PORT_A;
}
static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi,
const u8 *data)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
struct mipi_dsi_device *dsi_device;
u8 type, flags, seq_port;
u16 len;
enum port port;
DRM_DEBUG_KMS("\n");
flags = *data++;
type = *data++;
len = *((u16 *) data);
data += 2;
seq_port = (flags >> MIPI_PORT_SHIFT) & 3;
/* For DSI single link on Port A & C, the seq_port value which is
* parsed from Sequence Block#53 of VBT has been set to 0
* Now, read/write of packets for the DSI single link on Port A and
* Port C will based on the DVO port from VBT block 2.
*/
if (intel_dsi->ports == (1 << PORT_C))
port = PORT_C;
else
port = intel_dsi_seq_port_to_port(seq_port);
dsi_device = intel_dsi->dsi_hosts[port]->device;
if (!dsi_device) {
DRM_DEBUG_KMS("no dsi device for port %c\n", port_name(port));
goto out;
}
if ((flags >> MIPI_TRANSFER_MODE_SHIFT) & 1)
dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
else
dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;
dsi_device->channel = (flags >> MIPI_VIRTUAL_CHANNEL_SHIFT) & 3;
switch (type) {
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
mipi_dsi_generic_write(dsi_device, NULL, 0);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
mipi_dsi_generic_write(dsi_device, data, 1);
break;
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
mipi_dsi_generic_write(dsi_device, data, 2);
break;
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
DRM_DEBUG_DRIVER("Generic Read not yet implemented or used\n");
break;
case MIPI_DSI_GENERIC_LONG_WRITE:
mipi_dsi_generic_write(dsi_device, data, len);
break;
case MIPI_DSI_DCS_SHORT_WRITE:
mipi_dsi_dcs_write_buffer(dsi_device, data, 1);
break;
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
mipi_dsi_dcs_write_buffer(dsi_device, data, 2);
break;
case MIPI_DSI_DCS_READ:
DRM_DEBUG_DRIVER("DCS Read not yet implemented or used\n");
break;
case MIPI_DSI_DCS_LONG_WRITE:
mipi_dsi_dcs_write_buffer(dsi_device, data, len);
break;
}
if (INTEL_GEN(dev_priv) < 11)
vlv_dsi_wait_for_fifo_empty(intel_dsi, port);
out:
data += len;
return data;
}
static const u8 *mipi_exec_delay(struct intel_dsi *intel_dsi, const u8 *data)
{
u32 delay = *((const u32 *) data);
DRM_DEBUG_KMS("\n");
usleep_range(delay, delay + 10);
data += 4;
return data;
}
static void vlv_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
struct gpio_map *map;
u16 pconf0, padval;
u32 tmp;
u8 port;
if (gpio_index >= ARRAY_SIZE(vlv_gpio_table)) {
DRM_DEBUG_KMS("unknown gpio index %u\n", gpio_index);
return;
}
map = &vlv_gpio_table[gpio_index];
if (dev_priv->vbt.dsi.seq_version >= 3) {
/* XXX: this assumes vlv_gpio_table only has NC GPIOs. */
port = IOSF_PORT_GPIO_NC;
} else {
if (gpio_source == 0) {
port = IOSF_PORT_GPIO_NC;
} else if (gpio_source == 1) {
DRM_DEBUG_KMS("SC gpio not supported\n");
return;
} else {
DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
return;
}
}
pconf0 = VLV_GPIO_PCONF0(map->base_offset);
padval = VLV_GPIO_PAD_VAL(map->base_offset);
vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
if (!map->init) {
/* FIXME: remove constant below */
vlv_iosf_sb_write(dev_priv, port, pconf0, 0x2000CC00);
map->init = true;
}
tmp = 0x4 | value;
vlv_iosf_sb_write(dev_priv, port, padval, tmp);
vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
}
static void chv_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
u16 cfg0, cfg1;
u16 family_num;
u8 port;
if (dev_priv->vbt.dsi.seq_version >= 3) {
if (gpio_index >= CHV_GPIO_IDX_START_SE) {
/* XXX: it's unclear whether 255->57 is part of SE. */
gpio_index -= CHV_GPIO_IDX_START_SE;
port = CHV_IOSF_PORT_GPIO_SE;
} else if (gpio_index >= CHV_GPIO_IDX_START_SW) {
gpio_index -= CHV_GPIO_IDX_START_SW;
port = CHV_IOSF_PORT_GPIO_SW;
} else if (gpio_index >= CHV_GPIO_IDX_START_E) {
gpio_index -= CHV_GPIO_IDX_START_E;
port = CHV_IOSF_PORT_GPIO_E;
} else {
port = CHV_IOSF_PORT_GPIO_N;
}
} else {
/* XXX: The spec is unclear about CHV GPIO on seq v2 */
if (gpio_source != 0) {
DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
return;
}
if (gpio_index >= CHV_GPIO_IDX_START_E) {
DRM_DEBUG_KMS("invalid gpio index %u for GPIO N\n",
gpio_index);
return;
}
port = CHV_IOSF_PORT_GPIO_N;
}
family_num = gpio_index / CHV_VBT_MAX_PINS_PER_FMLY;
gpio_index = gpio_index % CHV_VBT_MAX_PINS_PER_FMLY;
cfg0 = CHV_GPIO_PAD_CFG0(family_num, gpio_index);
cfg1 = CHV_GPIO_PAD_CFG1(family_num, gpio_index);
vlv_iosf_sb_get(dev_priv, BIT(VLV_IOSF_SB_GPIO));
vlv_iosf_sb_write(dev_priv, port, cfg1, 0);
vlv_iosf_sb_write(dev_priv, port, cfg0,
CHV_GPIO_GPIOEN | CHV_GPIO_GPIOCFG_GPO |
CHV_GPIO_GPIOTXSTATE(value));
vlv_iosf_sb_put(dev_priv, BIT(VLV_IOSF_SB_GPIO));
}
static void bxt_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
/* XXX: this table is a quick ugly hack. */
static struct gpio_desc *bxt_gpio_table[U8_MAX + 1];
struct gpio_desc *gpio_desc = bxt_gpio_table[gpio_index];
if (!gpio_desc) {
gpio_desc = devm_gpiod_get_index(dev_priv->drm.dev,
NULL, gpio_index,
value ? GPIOD_OUT_LOW :
GPIOD_OUT_HIGH);
if (IS_ERR_OR_NULL(gpio_desc)) {
DRM_ERROR("GPIO index %u request failed (%ld)\n",
gpio_index, PTR_ERR(gpio_desc));
return;
}
bxt_gpio_table[gpio_index] = gpio_desc;
}
gpiod_set_value(gpio_desc, value);
}
static void icl_exec_gpio(struct drm_i915_private *dev_priv,
u8 gpio_source, u8 gpio_index, bool value)
{
DRM_DEBUG_KMS("Skipping ICL GPIO element execution\n");
}
static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u8 gpio_source, gpio_index = 0, gpio_number;
bool value;
DRM_DEBUG_KMS("\n");
if (dev_priv->vbt.dsi.seq_version >= 3)
gpio_index = *data++;
gpio_number = *data++;
/* gpio source in sequence v2 only */
if (dev_priv->vbt.dsi.seq_version == 2)
gpio_source = (*data >> 1) & 3;
else
gpio_source = 0;
/* pull up/down */
value = *data++ & 1;
if (INTEL_GEN(dev_priv) >= 11)
icl_exec_gpio(dev_priv, gpio_source, gpio_index, value);
else if (IS_VALLEYVIEW(dev_priv))
vlv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
else if (IS_CHERRYVIEW(dev_priv))
chv_exec_gpio(dev_priv, gpio_source, gpio_number, value);
else
bxt_exec_gpio(dev_priv, gpio_source, gpio_index, value);
return data;
}
#ifdef CONFIG_ACPI
static int i2c_adapter_lookup(struct acpi_resource *ares, void *data)
{
struct i2c_adapter_lookup *lookup = data;
struct intel_dsi *intel_dsi = lookup->intel_dsi;
struct acpi_resource_i2c_serialbus *sb;
struct i2c_adapter *adapter;
acpi_handle adapter_handle;
acpi_status status;
if (!i2c_acpi_get_i2c_resource(ares, &sb))
return 1;
if (lookup->slave_addr != sb->slave_address)
return 1;
status = acpi_get_handle(lookup->dev_handle,
sb->resource_source.string_ptr,
&adapter_handle);
if (ACPI_FAILURE(status))
return 1;
adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
if (adapter)
intel_dsi->i2c_bus_num = adapter->nr;
return 1;
}
static void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
const u16 slave_addr)
{
struct drm_device *drm_dev = intel_dsi->base.base.dev;
struct device *dev = &drm_dev->pdev->dev;
struct acpi_device *acpi_dev;
struct list_head resource_list;
struct i2c_adapter_lookup lookup;
acpi_dev = ACPI_COMPANION(dev);
if (acpi_dev) {
memset(&lookup, 0, sizeof(lookup));
lookup.slave_addr = slave_addr;
lookup.intel_dsi = intel_dsi;
lookup.dev_handle = acpi_device_handle(acpi_dev);
INIT_LIST_HEAD(&resource_list);
acpi_dev_get_resources(acpi_dev, &resource_list,
i2c_adapter_lookup,
&lookup);
acpi_dev_free_resource_list(&resource_list);
}
}
#else
static inline void i2c_acpi_find_adapter(struct intel_dsi *intel_dsi,
const u16 slave_addr)
{
}
#endif
static const u8 *mipi_exec_i2c(struct intel_dsi *intel_dsi, const u8 *data)
{
struct drm_device *drm_dev = intel_dsi->base.base.dev;
struct device *dev = &drm_dev->pdev->dev;
struct i2c_adapter *adapter;
struct i2c_msg msg;
int ret;
u8 vbt_i2c_bus_num = *(data + 2);
u16 slave_addr = *(u16 *)(data + 3);
u8 reg_offset = *(data + 5);
u8 payload_size = *(data + 6);
u8 *payload_data;
if (intel_dsi->i2c_bus_num < 0) {
intel_dsi->i2c_bus_num = vbt_i2c_bus_num;
i2c_acpi_find_adapter(intel_dsi, slave_addr);
}
adapter = i2c_get_adapter(intel_dsi->i2c_bus_num);
if (!adapter) {
DRM_DEV_ERROR(dev, "Cannot find a valid i2c bus for xfer\n");
goto err_bus;
}
payload_data = kzalloc(payload_size + 1, GFP_KERNEL);
if (!payload_data)
goto err_alloc;
payload_data[0] = reg_offset;
memcpy(&payload_data[1], (data + 7), payload_size);
msg.addr = slave_addr;
msg.flags = 0;
msg.len = payload_size + 1;
msg.buf = payload_data;
ret = i2c_transfer(adapter, &msg, 1);
if (ret < 0)
DRM_DEV_ERROR(dev,
"Failed to xfer payload of size (%u) to reg (%u)\n",
payload_size, reg_offset);
kfree(payload_data);
err_alloc:
i2c_put_adapter(adapter);
err_bus:
return data + payload_size + 7;
}
static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data)
{
DRM_DEBUG_KMS("Skipping SPI element execution\n");
return data + *(data + 5) + 6;
}
static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data)
{
#ifdef CONFIG_PMIC_OPREGION
u32 value, mask, reg_address;
u16 i2c_address;
int ret;
/* byte 0 aka PMIC Flag is reserved */
i2c_address = get_unaligned_le16(data + 1);
reg_address = get_unaligned_le32(data + 3);
value = get_unaligned_le32(data + 7);
mask = get_unaligned_le32(data + 11);
ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address,
reg_address,
value, mask);
if (ret)
DRM_ERROR("%s failed, error: %d\n", __func__, ret);
#else
DRM_ERROR("Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n");
#endif
return data + 15;
}
typedef const u8 * (*fn_mipi_elem_exec)(struct intel_dsi *intel_dsi,
const u8 *data);
static const fn_mipi_elem_exec exec_elem[] = {
[MIPI_SEQ_ELEM_SEND_PKT] = mipi_exec_send_packet,
[MIPI_SEQ_ELEM_DELAY] = mipi_exec_delay,
[MIPI_SEQ_ELEM_GPIO] = mipi_exec_gpio,
[MIPI_SEQ_ELEM_I2C] = mipi_exec_i2c,
[MIPI_SEQ_ELEM_SPI] = mipi_exec_spi,
[MIPI_SEQ_ELEM_PMIC] = mipi_exec_pmic,
};
/*
* MIPI Sequence from VBT #53 parsing logic
* We have already separated each seqence during bios parsing
* Following is generic execution function for any sequence
*/
static const char * const seq_name[] = {
[MIPI_SEQ_DEASSERT_RESET] = "MIPI_SEQ_DEASSERT_RESET",
[MIPI_SEQ_INIT_OTP] = "MIPI_SEQ_INIT_OTP",
[MIPI_SEQ_DISPLAY_ON] = "MIPI_SEQ_DISPLAY_ON",
[MIPI_SEQ_DISPLAY_OFF] = "MIPI_SEQ_DISPLAY_OFF",
[MIPI_SEQ_ASSERT_RESET] = "MIPI_SEQ_ASSERT_RESET",
[MIPI_SEQ_BACKLIGHT_ON] = "MIPI_SEQ_BACKLIGHT_ON",
[MIPI_SEQ_BACKLIGHT_OFF] = "MIPI_SEQ_BACKLIGHT_OFF",
[MIPI_SEQ_TEAR_ON] = "MIPI_SEQ_TEAR_ON",
[MIPI_SEQ_TEAR_OFF] = "MIPI_SEQ_TEAR_OFF",
[MIPI_SEQ_POWER_ON] = "MIPI_SEQ_POWER_ON",
[MIPI_SEQ_POWER_OFF] = "MIPI_SEQ_POWER_OFF",
};
static const char *sequence_name(enum mipi_seq seq_id)
{
if (seq_id < ARRAY_SIZE(seq_name) && seq_name[seq_id])
return seq_name[seq_id];
else
return "(unknown)";
}
static void intel_dsi_vbt_exec(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
const u8 *data;
fn_mipi_elem_exec mipi_elem_exec;
if (WARN_ON(seq_id >= ARRAY_SIZE(dev_priv->vbt.dsi.sequence)))
return;
data = dev_priv->vbt.dsi.sequence[seq_id];
if (!data)
return;
WARN_ON(*data != seq_id);
DRM_DEBUG_KMS("Starting MIPI sequence %d - %s\n",
seq_id, sequence_name(seq_id));
/* Skip Sequence Byte. */
data++;
/* Skip Size of Sequence. */
if (dev_priv->vbt.dsi.seq_version >= 3)
data += 4;
while (1) {
u8 operation_byte = *data++;
u8 operation_size = 0;
if (operation_byte == MIPI_SEQ_ELEM_END)
break;
if (operation_byte < ARRAY_SIZE(exec_elem))
mipi_elem_exec = exec_elem[operation_byte];
else
mipi_elem_exec = NULL;
/* Size of Operation. */
if (dev_priv->vbt.dsi.seq_version >= 3)
operation_size = *data++;
if (mipi_elem_exec) {
const u8 *next = data + operation_size;
data = mipi_elem_exec(intel_dsi, data);
/* Consistency check if we have size. */
if (operation_size && data != next) {
DRM_ERROR("Inconsistent operation size\n");
return;
}
} else if (operation_size) {
/* We have size, skip. */
DRM_DEBUG_KMS("Unsupported MIPI operation byte %u\n",
operation_byte);
data += operation_size;
} else {
/* No size, can't skip without parsing. */
DRM_ERROR("Unsupported MIPI operation byte %u\n",
operation_byte);
return;
}
}
}
void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id)
{
if (seq_id == MIPI_SEQ_POWER_ON && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
if (seq_id == MIPI_SEQ_BACKLIGHT_ON && intel_dsi->gpio_backlight)
gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 1);
intel_dsi_vbt_exec(intel_dsi, seq_id);
if (seq_id == MIPI_SEQ_POWER_OFF && intel_dsi->gpio_panel)
gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
if (seq_id == MIPI_SEQ_BACKLIGHT_OFF && intel_dsi->gpio_backlight)
gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 0);
}
void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
/* For v3 VBTs in vid-mode the delays are part of the VBT sequences */
if (is_vid_mode(intel_dsi) && dev_priv->vbt.dsi.seq_version >= 3)
return;
msleep(msec);
}
void intel_dsi_log_params(struct intel_dsi *intel_dsi)
{
DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
DRM_DEBUG_KMS("Lane count %d\n", intel_dsi->lane_count);
DRM_DEBUG_KMS("DPHY param reg 0x%x\n", intel_dsi->dphy_reg);
DRM_DEBUG_KMS("Video mode format %s\n",
intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ?
"non-burst with sync pulse" :
intel_dsi->video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS ?
"non-burst with sync events" :
intel_dsi->video_mode_format == VIDEO_MODE_BURST ?
"burst" : "<unknown>");
DRM_DEBUG_KMS("Burst mode ratio %d\n", intel_dsi->burst_mode_ratio);
DRM_DEBUG_KMS("Reset timer %d\n", intel_dsi->rst_timer_val);
DRM_DEBUG_KMS("Eot %s\n", enableddisabled(intel_dsi->eotp_pkt));
DRM_DEBUG_KMS("Clockstop %s\n", enableddisabled(!intel_dsi->clock_stop));
DRM_DEBUG_KMS("Mode %s\n", intel_dsi->operation_mode ? "command" : "video");
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK)
DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_FRONT_BACK\n");
else if (intel_dsi->dual_link == DSI_DUAL_LINK_PIXEL_ALT)
DRM_DEBUG_KMS("Dual link: DSI_DUAL_LINK_PIXEL_ALT\n");
else
DRM_DEBUG_KMS("Dual link: NONE\n");
DRM_DEBUG_KMS("Pixel Format %d\n", intel_dsi->pixel_format);
DRM_DEBUG_KMS("TLPX %d\n", intel_dsi->escape_clk_div);
DRM_DEBUG_KMS("LP RX Timeout 0x%x\n", intel_dsi->lp_rx_timeout);
DRM_DEBUG_KMS("Turnaround Timeout 0x%x\n", intel_dsi->turn_arnd_val);
DRM_DEBUG_KMS("Init Count 0x%x\n", intel_dsi->init_count);
DRM_DEBUG_KMS("HS to LP Count 0x%x\n", intel_dsi->hs_to_lp_count);
DRM_DEBUG_KMS("LP Byte Clock %d\n", intel_dsi->lp_byte_clk);
DRM_DEBUG_KMS("DBI BW Timer 0x%x\n", intel_dsi->bw_timer);
DRM_DEBUG_KMS("LP to HS Clock Count 0x%x\n", intel_dsi->clk_lp_to_hs_count);
DRM_DEBUG_KMS("HS to LP Clock Count 0x%x\n", intel_dsi->clk_hs_to_lp_count);
DRM_DEBUG_KMS("BTA %s\n",
enableddisabled(!(intel_dsi->video_frmt_cfg_bits & DISABLE_VIDEO_BTA)));
}
bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
u16 burst_mode_ratio;
enum port port;
DRM_DEBUG_KMS("\n");
intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
intel_dsi->lane_count = mipi_config->lane_cnt + 1;
intel_dsi->pixel_format =
pixel_format_from_register_bits(
mipi_config->videomode_color_format << 7);
intel_dsi->dual_link = mipi_config->dual_link;
intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
intel_dsi->operation_mode = mipi_config->is_cmd_mode;
intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout;
intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
intel_dsi->init_count = mipi_config->master_init_timer;
intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
intel_dsi->video_frmt_cfg_bits =
mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
intel_dsi->bgr_enabled = mipi_config->rgb_flip;
/* Starting point, adjusted depending on dual link and burst mode */
intel_dsi->pclk = mode->clock;
/* In dual link mode each port needs half of pixel clock */
if (intel_dsi->dual_link) {
intel_dsi->pclk /= 2;
/* we can enable pixel_overlap if needed by panel. In this
* case we need to increase the pixelclock for extra pixels
*/
if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
}
}
/* Burst Mode Ratio
* Target ddr frequency from VBT / non burst ddr freq
* multiply by 100 to preserve remainder
*/
if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
if (mipi_config->target_burst_mode_freq) {
u32 bitrate = intel_dsi_bitrate(intel_dsi);
/*
* Sometimes the VBT contains a slightly lower clock,
* then the bitrate we have calculated, in this case
* just replace it with the calculated bitrate.
*/
if (mipi_config->target_burst_mode_freq < bitrate &&
intel_fuzzy_clock_check(
mipi_config->target_burst_mode_freq,
bitrate))
mipi_config->target_burst_mode_freq = bitrate;
if (mipi_config->target_burst_mode_freq < bitrate) {
DRM_ERROR("Burst mode freq is less than computed\n");
return false;
}
burst_mode_ratio = DIV_ROUND_UP(
mipi_config->target_burst_mode_freq * 100,
bitrate);
intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
} else {
DRM_ERROR("Burst mode target is not set\n");
return false;
}
} else
burst_mode_ratio = 100;
intel_dsi->burst_mode_ratio = burst_mode_ratio;
/* delays in VBT are in unit of 100us, so need to convert
* here in ms
* Delay (100us) * 100 /1000 = Delay / 10 (ms) */
intel_dsi->backlight_off_delay = pps->bl_disable_delay / 10;
intel_dsi->backlight_on_delay = pps->bl_enable_delay / 10;
intel_dsi->panel_on_delay = pps->panel_on_delay / 10;
intel_dsi->panel_off_delay = pps->panel_off_delay / 10;
intel_dsi->panel_pwr_cycle_delay = pps->panel_power_cycle_delay / 10;
intel_dsi->i2c_bus_num = -1;
/* a regular driver would get the device in probe */
for_each_dsi_port(port, intel_dsi->ports) {
mipi_dsi_attach(intel_dsi->dsi_hosts[port]->device);
}
return true;
}
/*
* On some BYT/CHT devs some sequences are incomplete and we need to manually
* control some GPIOs. We need to add a GPIO lookup table before we get these.
* If the GOP did not initialize the panel (HDMI inserted) we may need to also
* change the pinmux for the SoC's PWM0 pin from GPIO to PWM.
*/
static struct gpiod_lookup_table pmic_panel_gpio_table = {
/* Intel GFX is consumer */
.dev_id = "0000:00:02.0",
.table = {
/* Panel EN/DISABLE */
GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
{ }
},
};
static struct gpiod_lookup_table soc_panel_gpio_table = {
.dev_id = "0000:00:02.0",
.table = {
GPIO_LOOKUP("INT33FC:01", 10, "backlight", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("INT33FC:01", 11, "panel", GPIO_ACTIVE_HIGH),
{ }
},
};
static const struct pinctrl_map soc_pwm_pinctrl_map[] = {
PIN_MAP_MUX_GROUP("0000:00:02.0", "soc_pwm0", "INT33FC:00",
"pwm0_grp", "pwm"),
};
void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
enum gpiod_flags flags = panel_is_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
bool want_backlight_gpio = false;
bool want_panel_gpio = false;
struct pinctrl *pinctrl;
int ret;
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
mipi_config->pwm_blc == PPS_BLC_PMIC) {
gpiod_add_lookup_table(&pmic_panel_gpio_table);
want_panel_gpio = true;
}
if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) {
gpiod_add_lookup_table(&soc_panel_gpio_table);
want_panel_gpio = true;
want_backlight_gpio = true;
/* Ensure PWM0 pin is muxed as PWM instead of GPIO */
ret = pinctrl_register_mappings(soc_pwm_pinctrl_map,
ARRAY_SIZE(soc_pwm_pinctrl_map));
if (ret)
DRM_ERROR("Failed to register pwm0 pinmux mapping\n");
pinctrl = devm_pinctrl_get_select(dev->dev, "soc_pwm0");
if (IS_ERR(pinctrl))
DRM_ERROR("Failed to set pinmux to PWM\n");
}
if (want_panel_gpio) {
intel_dsi->gpio_panel = gpiod_get(dev->dev, "panel", flags);
if (IS_ERR(intel_dsi->gpio_panel)) {
DRM_ERROR("Failed to own gpio for panel control\n");
intel_dsi->gpio_panel = NULL;
}
}
if (want_backlight_gpio) {
intel_dsi->gpio_backlight =
gpiod_get(dev->dev, "backlight", flags);
if (IS_ERR(intel_dsi->gpio_backlight)) {
DRM_ERROR("Failed to own gpio for backlight control\n");
intel_dsi->gpio_backlight = NULL;
}
}
}
void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
if (intel_dsi->gpio_panel) {
gpiod_put(intel_dsi->gpio_panel);
intel_dsi->gpio_panel = NULL;
}
if (intel_dsi->gpio_backlight) {
gpiod_put(intel_dsi->gpio_backlight);
intel_dsi->gpio_backlight = NULL;
}
if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
mipi_config->pwm_blc == PPS_BLC_PMIC)
gpiod_remove_lookup_table(&pmic_panel_gpio_table);
if (IS_VALLEYVIEW(dev_priv) && mipi_config->pwm_blc == PPS_BLC_SOC) {
pinctrl_unregister_mappings(soc_pwm_pinctrl_map);
gpiod_remove_lookup_table(&soc_panel_gpio_table);
}
}