Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

#!/bin/sh
#
# Copyright (c) 2007 Kungliga Tekniska Högskolan
# (Royal Institute of Technology, Stockholm, Sweden). 
# All rights reserved. 
#
# Redistribution and use in source and binary forms, with or without 
# modification, are permitted provided that the following conditions 
# are met: 
#
# 1. Redistributions of source code must retain the above copyright 
#    notice, this list of conditions and the following disclaimer. 
#
# 2. Redistributions in binary form must reproduce the above copyright 
#    notice, this list of conditions and the following disclaimer in the 
#    documentation and/or other materials provided with the distribution. 
#
# 3. Neither the name of the Institute nor the names of its contributors 
#    may be used to endorse or promote products derived from this software 
#    without specific prior written permission. 
#
# THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND 
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
# ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE 
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 
# SUCH DAMAGE. 

top_builddir="@top_builddir@"
env_setup="@env_setup@"
objdir="."

. ${env_setup}

srcdir="${top_srcdir}/tests/kdc"
test_alname="${test_alname} --simple"

rm -f localname

check_localname() {
    stderr=
    if test "$2" -ne 0; then
	stderr="2>/dev/null"
    fi
    eval ${test_alname} "'$1'" > localname $stderr
    status=$?
    if test $status -ne "$2"; then
	echo "Unexpected exit code from test_alname $1: $status"
	exit 1
    fi
    if test $status -ne 0; then
	return 0
    fi
    read lname < localname
    if test "X$lname" != "X$3"; then
	echo "Unexpected mapping of $1: $lname"
	exit 1
    fi
    return 0
}

R=TEST.H5L.SE
R2=TEST2.H5L.SE
R3=TEST3.H5L.SE
R4=TEST4.H5L.SE

KRB5_CONFIG="${objdir}/krb5-authz.conf"
export KRB5_CONFIG

echo "Checking 1-component principal names in default realms"
check_localname mapped1@${R} 0 foo || exit 1
check_localname mapped2@${R} 0 bar || exit 1
check_localname mapped1@${R2} 0 m1 || exit 1
check_localname mapped2@${R2} 0 m2 || exit 1
check_localname mapped1@${R3} 0 mapped1 || exit 1
check_localname mapped2@${R3} 0 mapped2 || exit 1
check_localname notmapped1@${R} 0 notmapped1 || exit 1
check_localname notmapped1@${R2} 0 notmapped1 || exit 1
check_localname notmapped1@${R3} 0 notmapped1 || exit 1

echo "Checking 1-component principal names in non-default realm"
check_localname mapped1@${R4} 1 || exit 1
check_localname notmapped1@${R4} 1 || exit 1

echo "Checking 2-component principal names"
check_localname foo/mapped1@${R} 0 foo || exit 1
check_localname foo/mapped2@${R} 0 bar || exit 1
check_localname bar/mapped1@${R2} 0 foobar || exit 1
check_localname bar/mapped2@${R2} 0 foobaz || exit 1
check_localname foo/mapped1@${R3} 1 || exit 1
check_localname bar/mapped1@${R3} 1 || exit 1
check_localname foo/notmapped1@${R} 1 || exit 1
check_localname bar/notmapped1@${R2} 1 || exit 1

echo "Checking 2-component principal names in non-default realm"
check_localname foo/mapped1@${R4} 1 || exit 1
check_localname bar/mapped1@${R4} 1 || exit 1
check_localname foo/notmapped1@${R4} 1 || exit 1
check_localname bar/notmapped1@${R4} 1 || exit 1

echo "Checking for overflow"
test_alname="${test_alname} --simple --lname-size=1"
check_localname mapped1@${R} 3 || exit 1
check_localname mapped2@${R} 3 || exit 1
check_localname mapped1@${R2} 3 || exit 1
check_localname mapped2@${R2} 3 || exit 1
check_localname mapped1@${R3} 3 || exit 1
check_localname mapped2@${R3} 3 || exit 1

echo "Checking krb5_kuserok()"
${test_kuserok} random-princ@RANDOM-REALM foo > /dev/null || exit 1
${test_kuserok} mapped1@${R} foo > /dev/null || exit 1
${test_kuserok} mapped1@${R2} m1 > /dev/null || exit 1
${test_kuserok} notmapped1@${R3} notmapped1 > /dev/null || exit 1
${test_kuserok} this-better-not-exist@NOR-THIS foo > /dev/null && exit 1

# If the user running this test has a ~/.k5login or .k5logind, test
# based on their content
if test -n "${HOME}" -a -n "${USER:-${LOGNAME}}" -a -s "${HOME}/.k5login"; then
    echo "Checking ~/.k5login"
    while read princ; do
	${test_kuserok} "${princ}" "${USER:-${LOGNAME}}" > /dev/null || exit 1
    done < "${HOME}/.k5login" || exit 1
fi
if test -n "${HOME}" -a -n "${USER:-${LOGNAME}}" -a -d "${HOME}/.k5login.d"; then
    echo "Checking ~/.k5login.d"
    ls -f "${HOME}/.k5login.d" | egrep -v '^(\.|\.\.|#.*|.*~|\.*.sw.)$' | while read f; do
	f="${HOME}/.k5login.d/$f"
	test -d "${f}" && continue
	while read princ; do
	    ${test_kuserok} "${princ}" "${USER:-${LOGNAME}}" > /dev/null || exit 1
	done < "${f}" || exit 1
    done || exit 1
fi

KRB5_CONFIG="${objdir}/krb5-authz2.conf"
export KRB5_CONFIG

echo "Checking krb5_kuserok() (with authoritative k5login files)"
${test_kuserok} random-princ@RANDOM-REALM foo > /dev/null || exit 1
${test_kuserok} mapped1@${R} foo > /dev/null && exit 1
${test_kuserok} mapped1@${R2} m1 > /dev/null || exit 1
${test_kuserok} notmapped1@${R3} notmapped1 > /dev/null || exit 1
${test_kuserok} this-better-not-exist@NOR-THIS foo > /dev/null && exit 1

rm -f messages.log

exit 0