;; Predicate definitions for Renesas RX.
;; Copyright (C) 2008-2020 Free Software Foundation, Inc.
;; Contributed by Red Hat.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>.
;; Check that the operand is suitable for a call insn.
;; Only registers and symbol refs are allowed.
(define_predicate "rx_call_operand"
(ior (match_code "reg")
(and (match_test "!TARGET_JSR")
(match_code "symbol_ref")))
)
;; For sibcall operations we can only use a symbolic address.
(define_predicate "rx_symbolic_call_operand"
(match_code "symbol_ref")
)
;; Check that the operand is suitable for a shift insn
;; Only small integers or a value in a register are permitted.
(define_predicate "rx_shift_operand"
(ior (match_operand 0 "register_operand")
(and (match_code "const_int")
(match_test "IN_RANGE (INTVAL (op), 0, 31)")))
)
(define_predicate "rx_constshift_operand"
(and (match_code "const_int")
(match_test "IN_RANGE (INTVAL (op), 0, 31)"))
)
(define_predicate "rx_restricted_mem_operand"
(and (match_code "mem")
(match_test "rx_is_restricted_memory_address (XEXP (op, 0), mode)"))
)
;; Check that the operand is suitable as the source operand
;; for a logic or arithmeitc instruction. Registers, integers
;; and a restricted subset of memory addresses are allowed.
(define_predicate "rx_source_operand"
(ior (match_operand 0 "register_operand")
(match_operand 0 "immediate_operand")
(match_operand 0 "rx_restricted_mem_operand"))
)
;; Check that the operand is suitable as the source operand
;; for a comparison instruction. This is the same as
;; rx_source_operand except that SUBREGs are allowed but
;; CONST_INTs are not.
(define_predicate "rx_compare_operand"
(ior (match_operand 0 "register_operand")
(match_operand 0 "rx_restricted_mem_operand"))
)
;; Check that the operand is suitable as the source operand
;; for a min/max instruction. This is the same as
;; rx_source_operand except that CONST_INTs are allowed but
;; REGs and SUBREGs are not.
(define_predicate "rx_minmaxex_operand"
(ior (match_operand 0 "immediate_operand")
(match_operand 0 "rx_restricted_mem_operand"))
)
;; Return true if OP is a store multiple operation. This looks like:
;;
;; [(set (SP) (MINUS (SP) (INT)))
;; (set (MEM (SP)) (REG))
;; (set (MEM (MINUS (SP) (INT))) (REG)) {optionally repeated}
;; ]
(define_special_predicate "rx_store_multiple_vector"
(match_code "parallel")
{
int count = XVECLEN (op, 0);
unsigned int src_regno;
rtx element;
int i;
/* Perform a quick check so we don't blow up below. */
if (count <= 2)
return false;
/* Check that the first element of the vector is the stack adjust. */
element = XVECEXP (op, 0, 0);
if ( ! SET_P (element)
|| ! REG_P (SET_DEST (element))
|| REGNO (SET_DEST (element)) != SP_REG
|| GET_CODE (SET_SRC (element)) != MINUS
|| ! REG_P (XEXP (SET_SRC (element), 0))
|| REGNO (XEXP (SET_SRC (element), 0)) != SP_REG
|| ! CONST_INT_P (XEXP (SET_SRC (element), 1)))
return false;
/* Check that the next element is the first push. */
element = XVECEXP (op, 0, 1);
if ( ! SET_P (element)
|| ! REG_P (SET_SRC (element))
|| GET_MODE (SET_SRC (element)) != SImode
|| ! MEM_P (SET_DEST (element))
|| GET_MODE (SET_DEST (element)) != SImode
|| GET_CODE (XEXP (SET_DEST (element), 0)) != MINUS
|| ! REG_P (XEXP (XEXP (SET_DEST (element), 0), 0))
|| REGNO (XEXP (XEXP (SET_DEST (element), 0), 0)) != SP_REG
|| ! CONST_INT_P (XEXP (XEXP (SET_DEST (element), 0), 1))
|| INTVAL (XEXP (XEXP (SET_DEST (element), 0), 1))
!= GET_MODE_SIZE (SImode))
return false;
src_regno = REGNO (SET_SRC (element));
/* Check that the remaining elements use SP-<disp>
addressing and decreasing register numbers. */
for (i = 2; i < count; i++)
{
element = XVECEXP (op, 0, i);
if ( ! SET_P (element)
|| ! REG_P (SET_SRC (element))
|| GET_MODE (SET_SRC (element)) != SImode
|| REGNO (SET_SRC (element)) != src_regno - (i - 1)
|| ! MEM_P (SET_DEST (element))
|| GET_MODE (SET_DEST (element)) != SImode
|| GET_CODE (XEXP (SET_DEST (element), 0)) != MINUS
|| ! REG_P (XEXP (XEXP (SET_DEST (element), 0), 0))
|| REGNO (XEXP (XEXP (SET_DEST (element), 0), 0)) != SP_REG
|| ! CONST_INT_P (XEXP (XEXP (SET_DEST (element), 0), 1))
|| INTVAL (XEXP (XEXP (SET_DEST (element), 0), 1))
!= i * GET_MODE_SIZE (SImode))
return false;
}
return true;
})
;; Return true if OP is a load multiple operation.
;; This looks like:
;; [(set (SP) (PLUS (SP) (INT)))
;; (set (REG) (MEM (SP)))
;; (set (REG) (MEM (PLUS (SP) (INT)))) {optionally repeated}
;; ]
(define_special_predicate "rx_load_multiple_vector"
(match_code "parallel")
{
int count = XVECLEN (op, 0);
unsigned int dest_regno;
rtx element;
int i;
/* Perform a quick check so we don't blow up below. */
if (count <= 2)
return false;
/* Check that the first element of the vector is the stack adjust. */
element = XVECEXP (op, 0, 0);
if ( ! SET_P (element)
|| ! REG_P (SET_DEST (element))
|| REGNO (SET_DEST (element)) != SP_REG
|| GET_CODE (SET_SRC (element)) != PLUS
|| ! REG_P (XEXP (SET_SRC (element), 0))
|| REGNO (XEXP (SET_SRC (element), 0)) != SP_REG
|| ! CONST_INT_P (XEXP (SET_SRC (element), 1)))
return false;
/* Check that the next element is the first push. */
element = XVECEXP (op, 0, 1);
if ( ! SET_P (element)
|| ! REG_P (SET_DEST (element))
|| ! MEM_P (SET_SRC (element))
|| ! REG_P (XEXP (SET_SRC (element), 0))
|| REGNO (XEXP (SET_SRC (element), 0)) != SP_REG)
return false;
dest_regno = REGNO (SET_DEST (element));
/* Check that the remaining elements use SP+<disp>
addressing and incremental register numbers. */
for (i = 2; i < count; i++)
{
element = XVECEXP (op, 0, i);
if ( ! SET_P (element)
|| ! REG_P (SET_DEST (element))
|| GET_MODE (SET_DEST (element)) != SImode
|| REGNO (SET_DEST (element)) != dest_regno + (i - 1)
|| ! MEM_P (SET_SRC (element))
|| GET_MODE (SET_SRC (element)) != SImode
|| GET_CODE (XEXP (SET_SRC (element), 0)) != PLUS
|| ! REG_P (XEXP (XEXP (SET_SRC (element), 0), 0))
|| REGNO (XEXP (XEXP (SET_SRC (element), 0), 0)) != SP_REG
|| ! CONST_INT_P (XEXP (XEXP (SET_SRC (element), 0), 1))
|| INTVAL (XEXP (XEXP (SET_SRC (element), 0), 1))
!= (i - 1) * GET_MODE_SIZE (SImode))
return false;
}
return true;
})
;; Return true if OP is a pop-and-return load multiple operation.
;; This looks like:
;; [(set (SP) (PLUS (SP) (INT)))
;; (set (REG) (MEM (SP)))
;; (set (REG) (MEM (PLUS (SP) (INT)))) {optional and possibly repeated}
;; (return)
;; ]
(define_special_predicate "rx_rtsd_vector"
(match_code "parallel")
{
int count = XVECLEN (op, 0);
unsigned int dest_regno;
rtx element;
int i;
/* Perform a quick check so we don't blow up below. */
if (count <= 2)
return false;
/* Check that the first element of the vector is the stack adjust. */
element = XVECEXP (op, 0, 0);
if ( ! SET_P (element)
|| ! REG_P (SET_DEST (element))
|| REGNO (SET_DEST (element)) != SP_REG
|| GET_CODE (SET_SRC (element)) != PLUS
|| ! REG_P (XEXP (SET_SRC (element), 0))
|| REGNO (XEXP (SET_SRC (element), 0)) != SP_REG
|| ! CONST_INT_P (XEXP (SET_SRC (element), 1)))
return false;
/* Check that the next element is the first push. */
element = XVECEXP (op, 0, 1);
if ( ! SET_P (element)
|| ! REG_P (SET_DEST (element))
|| ! MEM_P (SET_SRC (element))
|| ! REG_P (XEXP (SET_SRC (element), 0))
|| REGNO (XEXP (SET_SRC (element), 0)) != SP_REG)
return false;
dest_regno = REGNO (SET_DEST (element));
/* Check that the remaining elements, if any, and except
for the last one, use SP+<disp> addressing and incremental
register numbers. */
for (i = 2; i < count - 1; i++)
{
element = XVECEXP (op, 0, i);
if ( ! SET_P (element)
|| ! REG_P (SET_DEST (element))
|| GET_MODE (SET_DEST (element)) != SImode
|| REGNO (SET_DEST (element)) != dest_regno + (i - 1)
|| ! MEM_P (SET_SRC (element))
|| GET_MODE (SET_SRC (element)) != SImode
|| GET_CODE (XEXP (SET_SRC (element), 0)) != PLUS
|| ! REG_P (XEXP (XEXP (SET_SRC (element), 0), 0))
|| REGNO (XEXP (XEXP (SET_SRC (element), 0), 0)) != SP_REG
|| ! CONST_INT_P (XEXP (XEXP (SET_SRC (element), 0), 1))
|| INTVAL (XEXP (XEXP (SET_SRC (element), 0), 1))
!= (i - 1) * GET_MODE_SIZE (SImode))
return false;
}
/* The last element must be a RETURN. */
element = XVECEXP (op, 0, count - 1);
return GET_CODE (element) == RETURN;
})
(define_predicate "label_ref_operand"
(match_code "label_ref")
)
(define_predicate "rx_z_comparison_operator"
(match_code "eq,ne")
)
(define_predicate "rx_zs_comparison_operator"
(match_code "eq,ne,lt,ge")
)
;; GT and LE omitted due to operand swap required.
(define_predicate "rx_fp_comparison_operator"
(match_code "eq,ne,lt,ge,ordered,unordered")
)
(define_predicate "rshift_operator"
(match_code "ashiftrt,lshiftrt")
)