/* $NetBSD: mlx_pci.c,v 1.28 2021/04/24 23:36:57 thorpej Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Andrew Doran.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 1999 Michael Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from FreeBSD: mlx_pci.c,v 1.4.2.4 2000/10/28 10:48:09 msmith Exp
*/
/*
* PCI front-end for the mlx(4) driver.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: mlx_pci.c,v 1.28 2021/04/24 23:36:57 thorpej Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/callout.h>
#include <sys/module.h>
#include <machine/endian.h>
#include <sys/bus.h>
#include <dev/ic/mlxreg.h>
#include <dev/ic/mlxio.h>
#include <dev/ic/mlxvar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include "ioconf.h"
static void mlx_pci_attach(device_t, device_t, void *);
static int mlx_pci_match(device_t, cfdata_t, void *);
static const struct mlx_pci_ident *mlx_pci_findmpi(struct pci_attach_args *);
static int mlx_v3_submit(struct mlx_softc *, struct mlx_ccb *);
static int mlx_v3_findcomplete(struct mlx_softc *, u_int *, u_int *);
static void mlx_v3_intaction(struct mlx_softc *, int);
static int mlx_v3_fw_handshake(struct mlx_softc *, int *, int *, int *);
#ifdef MLX_RESET
static int mlx_v3_reset(struct mlx_softc *);
#endif
static int mlx_v4_submit(struct mlx_softc *, struct mlx_ccb *);
static int mlx_v4_findcomplete(struct mlx_softc *, u_int *, u_int *);
static void mlx_v4_intaction(struct mlx_softc *, int);
static int mlx_v4_fw_handshake(struct mlx_softc *, int *, int *, int *);
static int mlx_v5_submit(struct mlx_softc *, struct mlx_ccb *);
static int mlx_v5_findcomplete(struct mlx_softc *, u_int *, u_int *);
static void mlx_v5_intaction(struct mlx_softc *, int);
static int mlx_v5_fw_handshake(struct mlx_softc *, int *, int *, int *);
static struct mlx_pci_ident {
u_short mpi_vendor;
u_short mpi_product;
u_short mpi_subvendor;
u_short mpi_subproduct;
int mpi_iftype;
} const mlx_pci_ident[] = {
{
PCI_VENDOR_MYLEX,
PCI_PRODUCT_MYLEX_RAID_V2,
0x0000,
0x0000,
2,
},
{
PCI_VENDOR_MYLEX,
PCI_PRODUCT_MYLEX_RAID_V3,
0x0000,
0x0000,
3,
},
{
PCI_VENDOR_MYLEX,
PCI_PRODUCT_MYLEX_RAID_V4,
0x0000,
0x0000,
4,
},
{
PCI_VENDOR_DEC,
PCI_PRODUCT_DEC_SWXCR,
PCI_VENDOR_MYLEX,
PCI_PRODUCT_MYLEX_RAID_V5,
5,
},
};
static int
mlx_pci_rescan(device_t self, const char *ifattr, const int *locs)
{
return mlx_configure(device_private(self), 1);
}
CFATTACH_DECL3_NEW(mlx_pci, sizeof(struct mlx_softc),
mlx_pci_match, mlx_pci_attach, NULL, NULL, mlx_pci_rescan, NULL, 0);
/*
* Try to find a `mlx_pci_ident' entry corresponding to this board.
*/
static const struct mlx_pci_ident *
mlx_pci_findmpi(struct pci_attach_args *pa)
{
const struct mlx_pci_ident *mpi, *maxmpi;
pcireg_t reg;
mpi = mlx_pci_ident;
maxmpi = mpi + sizeof(mlx_pci_ident) / sizeof(mlx_pci_ident[0]);
for (; mpi < maxmpi; mpi++) {
if (PCI_VENDOR(pa->pa_id) != mpi->mpi_vendor ||
PCI_PRODUCT(pa->pa_id) != mpi->mpi_product)
continue;
if (mpi->mpi_subvendor == 0x0000)
return (mpi);
reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_SUBSYS_ID_REG);
if (PCI_VENDOR(reg) == mpi->mpi_subvendor &&
PCI_PRODUCT(reg) == mpi->mpi_subproduct)
return (mpi);
}
return (NULL);
}
/*
* Match a supported board.
*/
static int
mlx_pci_match(device_t parent, cfdata_t cfdata, void *aux)
{
return (mlx_pci_findmpi(aux) != NULL);
}
/*
* Attach a supported board.
*/
static void
mlx_pci_attach(device_t parent, device_t self, void *aux)
{
struct pci_attach_args *pa;
struct mlx_softc *mlx;
pci_chipset_tag_t pc;
pci_intr_handle_t ih;
bus_space_handle_t memh, ioh;
bus_space_tag_t memt, iot;
pcireg_t reg;
const char *intrstr;
int ior, memr, i;
const struct mlx_pci_ident *mpi;
char intrbuf[PCI_INTRSTR_LEN];
mlx = device_private(self);
pa = aux;
pc = pa->pa_pc;
mpi = mlx_pci_findmpi(aux);
mlx->mlx_dv = self;
mlx->mlx_dmat = pa->pa_dmat;
mlx->mlx_ci.ci_iftype = mpi->mpi_iftype;
printf(": Mylex RAID (v%d interface)\n", mpi->mpi_iftype);
/*
* Map the PCI register window.
*/
memr = -1;
ior = -1;
for (i = 0x10; i <= 0x14; i += 4) {
reg = pci_conf_read(pa->pa_pc, pa->pa_tag, i);
if (PCI_MAPREG_TYPE(reg) == PCI_MAPREG_TYPE_IO) {
if (ior == -1 && PCI_MAPREG_IO_SIZE(reg) != 0)
ior = i;
} else {
if (memr == -1 && PCI_MAPREG_MEM_SIZE(reg) != 0)
memr = i;
}
}
if (memr != -1)
if (pci_mapreg_map(pa, memr, PCI_MAPREG_TYPE_MEM, 0,
&memt, &memh, NULL, NULL))
memr = -1;
if (ior != -1)
if (pci_mapreg_map(pa, ior, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL))
ior = -1;
if (memr != -1) {
mlx->mlx_iot = memt;
mlx->mlx_ioh = memh;
} else if (ior != -1) {
mlx->mlx_iot = iot;
mlx->mlx_ioh = ioh;
} else {
aprint_error_dev(self, "can't map i/o or memory space\n");
return;
}
/* Enable the device. */
reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
reg | PCI_COMMAND_MASTER_ENABLE);
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "can't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih, intrbuf, sizeof(intrbuf));
mlx->mlx_ih = pci_intr_establish_xname(pc, ih, IPL_BIO, mlx_intr, mlx,
device_xname(self));
if (mlx->mlx_ih == NULL) {
aprint_error_dev(self, "can't establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
return;
}
/* Select linkage based on controller interface type. */
switch (mlx->mlx_ci.ci_iftype) {
case 2:
case 3:
mlx->mlx_submit = mlx_v3_submit;
mlx->mlx_findcomplete = mlx_v3_findcomplete;
mlx->mlx_intaction = mlx_v3_intaction;
mlx->mlx_fw_handshake = mlx_v3_fw_handshake;
#ifdef MLX_RESET
mlx->mlx_reset = mlx_v3_reset;
#endif
break;
case 4:
mlx->mlx_submit = mlx_v4_submit;
mlx->mlx_findcomplete = mlx_v4_findcomplete;
mlx->mlx_intaction = mlx_v4_intaction;
mlx->mlx_fw_handshake = mlx_v4_fw_handshake;
break;
case 5:
mlx->mlx_submit = mlx_v5_submit;
mlx->mlx_findcomplete = mlx_v5_findcomplete;
mlx->mlx_intaction = mlx_v5_intaction;
mlx->mlx_fw_handshake = mlx_v5_fw_handshake;
break;
}
mlx_init(mlx, intrstr);
}
/*
* ================= V3 interface linkage =================
*/
/*
* Try to give (mc) to the controller. Returns 1 if successful, 0 on
* failure (the controller is not ready to take a command).
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static int
mlx_v3_submit(struct mlx_softc *mlx, struct mlx_ccb *mc)
{
/* Ready for our command? */
if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_FULL) == 0) {
/* Copy mailbox data to window. */
bus_space_write_region_1(mlx->mlx_iot, mlx->mlx_ioh,
MLX_V3REG_MAILBOX, mc->mc_mbox, 13);
bus_space_barrier(mlx->mlx_iot, mlx->mlx_ioh,
MLX_V3REG_MAILBOX, 13,
BUS_SPACE_BARRIER_WRITE);
/* Post command. */
mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_FULL);
return (1);
}
return (0);
}
/*
* See if a command has been completed, if so acknowledge its completion and
* recover the slot number and status code.
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static int
mlx_v3_findcomplete(struct mlx_softc *mlx, u_int *slot, u_int *status)
{
/* Status available? */
if ((mlx_inb(mlx, MLX_V3REG_ODB) & MLX_V3_ODB_SAVAIL) != 0) {
*slot = mlx_inb(mlx, MLX_V3REG_STATUS_IDENT);
*status = mlx_inw(mlx, MLX_V3REG_STATUS);
/* Acknowledge completion. */
mlx_outb(mlx, MLX_V3REG_ODB, MLX_V3_ODB_SAVAIL);
mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_SACK);
return (1);
}
return (0);
}
/*
* Enable/disable interrupts as requested. (No acknowledge required)
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static void
mlx_v3_intaction(struct mlx_softc *mlx, int action)
{
mlx_outb(mlx, MLX_V3REG_IE, action != 0);
}
/*
* Poll for firmware error codes during controller initialisation.
*
* Returns 0 if initialisation is complete, 1 if still in progress but no
* error has been fetched, 2 if an error has been retrieved.
*/
static int
mlx_v3_fw_handshake(struct mlx_softc *mlx, int *error, int *param1, int *param2)
{
u_int8_t fwerror;
/* First time around, clear any hardware completion status. */
if ((mlx->mlx_flags & MLXF_FW_INITTED) == 0) {
mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_SACK);
DELAY(1000);
mlx->mlx_flags |= MLXF_FW_INITTED;
}
/* Init in progress? */
if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_INIT_BUSY) == 0)
return (0);
/* Test error value. */
fwerror = mlx_inb(mlx, MLX_V3REG_FWERROR);
if ((fwerror & MLX_V3_FWERROR_PEND) == 0)
return (1);
/* Mask status pending bit, fetch status. */
*error = fwerror & ~MLX_V3_FWERROR_PEND;
*param1 = mlx_inb(mlx, MLX_V3REG_FWERROR_PARAM1);
*param2 = mlx_inb(mlx, MLX_V3REG_FWERROR_PARAM2);
/* Acknowledge. */
mlx_outb(mlx, MLX_V3REG_FWERROR, 0);
return (2);
}
#ifdef MLX_RESET
/*
* Reset the controller. Return non-zero on failure.
*/
static int
mlx_v3_reset(struct mlx_softc *mlx)
{
int i;
mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_SACK);
delay(1000000);
/* Wait up to 2 minutes for the bit to clear. */
for (i = 120; i != 0; i--) {
delay(1000000);
if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_SACK) == 0)
break;
}
if (i == 0) {
/* ZZZ */
printf("mlx0: SACK didn't clear\n");
return (-1);
}
mlx_outb(mlx, MLX_V3REG_IDB, MLX_V3_IDB_RESET);
/* Wait up to 5 seconds for the bit to clear. */
for (i = 5; i != 0; i--) {
delay(1000000);
if ((mlx_inb(mlx, MLX_V3REG_IDB) & MLX_V3_IDB_RESET) == 0)
break;
}
if (i == 0) {
/* ZZZ */
printf("mlx0: RESET didn't clear\n");
return (-1);
}
return (0);
}
#endif /* MLX_RESET */
/*
* ================= V4 interface linkage =================
*/
/*
* Try to give (mc) to the controller. Returns 1 if successful, 0 on
* failure (the controller is not ready to take a command).
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static int
mlx_v4_submit(struct mlx_softc *mlx, struct mlx_ccb *mc)
{
/* Ready for our command? */
if ((mlx_inl(mlx, MLX_V4REG_IDB) & MLX_V4_IDB_FULL) == 0) {
/* Copy mailbox data to window. */
bus_space_write_region_1(mlx->mlx_iot, mlx->mlx_ioh,
MLX_V4REG_MAILBOX, mc->mc_mbox, 13);
bus_space_barrier(mlx->mlx_iot, mlx->mlx_ioh,
MLX_V4REG_MAILBOX, 13,
BUS_SPACE_BARRIER_WRITE);
/* Post command. */
mlx_outl(mlx, MLX_V4REG_IDB, MLX_V4_IDB_HWMBOX_CMD);
return (1);
}
return (0);
}
/*
* See if a command has been completed, if so acknowledge its completion and
* recover the slot number and status code.
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static int
mlx_v4_findcomplete(struct mlx_softc *mlx, u_int *slot, u_int *status)
{
/* Status available? */
if ((mlx_inl(mlx, MLX_V4REG_ODB) & MLX_V4_ODB_HWSAVAIL) != 0) {
*slot = mlx_inb(mlx, MLX_V4REG_STATUS_IDENT);
*status = mlx_inw(mlx, MLX_V4REG_STATUS);
/* Acknowledge completion. */
mlx_outl(mlx, MLX_V4REG_ODB, MLX_V4_ODB_HWMBOX_ACK);
mlx_outl(mlx, MLX_V4REG_IDB, MLX_V4_IDB_SACK);
return (1);
}
return (0);
}
/*
* Enable/disable interrupts as requested.
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static void
mlx_v4_intaction(struct mlx_softc *mlx, int action)
{
u_int32_t ier;
if (!action)
ier = MLX_V4_IE_MASK | MLX_V4_IE_DISINT;
else
ier = MLX_V4_IE_MASK & ~MLX_V4_IE_DISINT;
mlx_outl(mlx, MLX_V4REG_IE, ier);
}
/*
* Poll for firmware error codes during controller initialisation.
*
* Returns 0 if initialisation is complete, 1 if still in progress but no
* error has been fetched, 2 if an error has been retrieved.
*/
static int
mlx_v4_fw_handshake(struct mlx_softc *mlx, int *error, int *param1, int *param2)
{
u_int8_t fwerror;
/* First time around, clear any hardware completion status. */
if ((mlx->mlx_flags & MLXF_FW_INITTED) == 0) {
mlx_outl(mlx, MLX_V4REG_IDB, MLX_V4_IDB_SACK);
DELAY(1000);
mlx->mlx_flags |= MLXF_FW_INITTED;
}
/* Init in progress? */
if ((mlx_inl(mlx, MLX_V4REG_IDB) & MLX_V4_IDB_INIT_BUSY) == 0)
return (0);
/* Test error value */
fwerror = mlx_inb(mlx, MLX_V4REG_FWERROR);
if ((fwerror & MLX_V4_FWERROR_PEND) == 0)
return (1);
/* Mask status pending bit, fetch status. */
*error = fwerror & ~MLX_V4_FWERROR_PEND;
*param1 = mlx_inb(mlx, MLX_V4REG_FWERROR_PARAM1);
*param2 = mlx_inb(mlx, MLX_V4REG_FWERROR_PARAM2);
/* Acknowledge. */
mlx_outb(mlx, MLX_V4REG_FWERROR, 0);
return (2);
}
/*
* ================= V5 interface linkage =================
*/
/*
* Try to give (mc) to the controller. Returns 1 if successful, 0 on failure
* (the controller is not ready to take a command).
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static int
mlx_v5_submit(struct mlx_softc *mlx, struct mlx_ccb *mc)
{
/* Ready for our command? */
if ((mlx_inb(mlx, MLX_V5REG_IDB) & MLX_V5_IDB_EMPTY) != 0) {
/* Copy mailbox data to window. */
bus_space_write_region_1(mlx->mlx_iot, mlx->mlx_ioh,
MLX_V5REG_MAILBOX, mc->mc_mbox, 13);
bus_space_barrier(mlx->mlx_iot, mlx->mlx_ioh,
MLX_V5REG_MAILBOX, 13,
BUS_SPACE_BARRIER_WRITE);
/* Post command */
mlx_outb(mlx, MLX_V5REG_IDB, MLX_V5_IDB_HWMBOX_CMD);
return (1);
}
return (0);
}
/*
* See if a command has been completed, if so acknowledge its completion and
* recover the slot number and status code.
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static int
mlx_v5_findcomplete(struct mlx_softc *mlx, u_int *slot, u_int *status)
{
/* Status available? */
if ((mlx_inb(mlx, MLX_V5REG_ODB) & MLX_V5_ODB_HWSAVAIL) != 0) {
*slot = mlx_inb(mlx, MLX_V5REG_STATUS_IDENT);
*status = mlx_inw(mlx, MLX_V5REG_STATUS);
/* Acknowledge completion. */
mlx_outb(mlx, MLX_V5REG_ODB, MLX_V5_ODB_HWMBOX_ACK);
mlx_outb(mlx, MLX_V5REG_IDB, MLX_V5_IDB_SACK);
return (1);
}
return (0);
}
/*
* Enable/disable interrupts as requested.
*
* Must be called at splbio or in a fashion that prevents reentry.
*/
static void
mlx_v5_intaction(struct mlx_softc *mlx, int action)
{
u_int8_t ier;
if (!action)
ier = 0xff & MLX_V5_IE_DISINT;
else
ier = 0xff & ~MLX_V5_IE_DISINT;
mlx_outb(mlx, MLX_V5REG_IE, ier);
}
/*
* Poll for firmware error codes during controller initialisation.
*
* Returns 0 if initialisation is complete, 1 if still in progress but no
* error has been fetched, 2 if an error has been retrieved.
*/
static int
mlx_v5_fw_handshake(struct mlx_softc *mlx, int *error, int *param1, int *param2)
{
u_int8_t fwerror;
/* First time around, clear any hardware completion status. */
if ((mlx->mlx_flags & MLXF_FW_INITTED) == 0) {
mlx_outb(mlx, MLX_V5REG_IDB, MLX_V5_IDB_SACK);
DELAY(1000);
mlx->mlx_flags |= MLXF_FW_INITTED;
}
/* Init in progress? */
if ((mlx_inb(mlx, MLX_V5REG_IDB) & MLX_V5_IDB_INIT_DONE) != 0)
return (0);
/* Test for error value. */
fwerror = mlx_inb(mlx, MLX_V5REG_FWERROR);
if ((fwerror & MLX_V5_FWERROR_PEND) == 0)
return (1);
/* Mask status pending bit, fetch status. */
*error = fwerror & ~MLX_V5_FWERROR_PEND;
*param1 = mlx_inb(mlx, MLX_V5REG_FWERROR_PARAM1);
*param2 = mlx_inb(mlx, MLX_V5REG_FWERROR_PARAM2);
/* Acknowledge. */
mlx_outb(mlx, MLX_V5REG_FWERROR, 0xff);
return (2);
}
MODULE(MODULE_CLASS_DRIVER, mlx_pci, "mlx,pci");
#ifdef _MODULE
/*
* XXX Don't allow ioconf.c to redefine the "struct cfdriver ld_cd"
* XXX it will be defined in the common-code module
*/
#undef CFDRIVER_DECL
#define CFDRIVER_DECL(name, class, attr)
#include "ioconf.c"
#endif
static int
mlx_pci_modcmd(modcmd_t cmd, void *opaque)
{
int error = 0;
#ifdef _MODULE
switch (cmd) {
case MODULE_CMD_INIT:
/*
* We skip over the first entry in cfdriver[] array
* since the cfdriver is attached by the common
* (non-attachment-specific) code.
*/
error = config_init_component(&cfdriver_ioconf_mlx_pci[1],
cfattach_ioconf_mlx_pci, cfdata_ioconf_mlx_pci);
break;
case MODULE_CMD_FINI:
error = config_fini_component(&cfdriver_ioconf_mlx_pci[1],
cfattach_ioconf_mlx_pci, cfdata_ioconf_mlx_pci);
break;
default:
error = ENOTTY;
break;
}
#endif
return error;
}