# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Make Autoconf documentation.
# Copyright (C) 2000-2003, 2007-2012 Free Software Foundation, Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = $(autoconf_TEXINFOS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/stamp-vti \
$(srcdir)/version.texi $(standards_TEXINFOS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
$(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/make-case.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/autoconf.info $(srcdir)/standards.info
am__TEXINFO_TEX_DIR = $(srcdir)/../build-aux
DVIS = autoconf.dvi standards.dvi
PDFS = autoconf.pdf standards.pdf
PSS = autoconf.ps standards.ps
HTMLS = autoconf.html standards.html
TEXINFOS = autoconf.texi standards.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMACS = @EMACS@
EMACSLOADPATH = @EMACSLOADPATH@
EXPR = @EXPR@
GREP = @GREP@
HELP2MAN = @HELP2MAN@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
M4_DEBUGFILE = @M4_DEBUGFILE@
M4_GNU = @M4_GNU@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_FLOCK = @PERL_FLOCK@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TEST_EMACS = @TEST_EMACS@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_cv_dir_trailing_space = @ac_cv_dir_trailing_space@
ac_cv_sh_n_works = @ac_cv_sh_n_works@
ac_cv_unsupported_fs_chars = @ac_cv_unsupported_fs_chars@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
lispdir = @lispdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_MAKEINFOFLAGS = --no-split
TEXI2HTML_FLAGS = -split_chapter
TEXINFO_TEX = ../build-aux/texinfo.tex
info_TEXINFOS = autoconf.texi standards.texi
autoconf_TEXINFOS = fdl.texi install.texi
standards_TEXINFOS = fdl.texi gnu-oids.texi make-stds.texi
EXTRA_DIST = gendocs_template
# Files from texi2dvi that should be removed, but which Automake does
# not know.
CLEANFILES = autoconf.ACs autoconf.cvs autoconf.MSs autoconf.prs \
autoconf.ATs autoconf.evs autoconf.fns autoconf.ovs \
autoconf.ca autoconf.CA autoconf.cas autoconf.CAs \
autoconf.tmp
all: all-am
.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
.texi.info:
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && $(am__cd) $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
else :; fi && \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
$(am__cd) $(srcdir); \
else \
rc=$$?; \
$(am__cd) $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $<
.texi.pdf:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $<
.texi.html:
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
else \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
$(srcdir)/autoconf.info: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
autoconf.dvi: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
autoconf.pdf: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
autoconf.html: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
$(srcdir)/version.texi: $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: autoconf.texi $(top_srcdir)/configure
@(dir=.; test -f ./autoconf.texi || dir=$(srcdir); \
set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/autoconf.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
echo "@set VERSION $(VERSION)") > vti.tmp
@cmp -s vti.tmp $(srcdir)/version.texi \
|| (echo "Updating $(srcdir)/version.texi"; \
cp vti.tmp $(srcdir)/version.texi)
-@rm -f vti.tmp
@cp $(srcdir)/version.texi $@
mostlyclean-vti:
-rm -f vti.tmp
maintainer-clean-vti:
-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
$(srcdir)/standards.info: standards.texi $(standards_TEXINFOS)
standards.dvi: standards.texi $(standards_TEXINFOS)
standards.pdf: standards.texi $(standards_TEXINFOS)
standards.html: standards.texi $(standards_TEXINFOS)
.dvi.ps:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
$(DVIPS) -o $@ $<
uninstall-dvi-am:
@$(NORMAL_UNINSTALL)
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
rm -f "$(DESTDIR)$(dvidir)/$$f"; \
done
uninstall-html-am:
@$(NORMAL_UNINSTALL)
@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
done
uninstall-info-am:
@$(PRE_UNINSTALL)
@if test -d '$(DESTDIR)$(infodir)' && \
(install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
uninstall-pdf-am:
@$(NORMAL_UNINSTALL)
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
done
uninstall-ps-am:
@$(NORMAL_UNINSTALL)
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
rm -f "$(DESTDIR)$(psdir)/$$f"; \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
if test -f $$file; then \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f "$(distdir)/$$relfile" || \
cp -p $$file "$(distdir)/$$relfile"; \
else :; fi; \
done; \
done
mostlyclean-aminfo:
-rm -rf autoconf.AC autoconf.ACs autoconf.AT autoconf.ATs autoconf.CA \
autoconf.CAs autoconf.MS autoconf.MSs autoconf.aux \
autoconf.cp autoconf.cps autoconf.cv autoconf.cvs \
autoconf.ev autoconf.evs autoconf.fn autoconf.fns \
autoconf.ky autoconf.kys autoconf.log autoconf.ov \
autoconf.ovs autoconf.pg autoconf.pgs autoconf.pr \
autoconf.prs autoconf.tmp autoconf.toc autoconf.tp \
autoconf.tps autoconf.vr standards.aux standards.cp \
standards.cps standards.fn standards.ky standards.log \
standards.pg standards.tmp standards.toc standards.tp \
standards.tps standards.vr
clean-aminfo:
-test -z "autoconf.dvi autoconf.pdf autoconf.ps autoconf.html standards.dvi \
standards.pdf standards.ps standards.html" \
|| rm -rf autoconf.dvi autoconf.pdf autoconf.ps autoconf.html standards.dvi \
standards.pdf standards.ps standards.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)
installdirs:
for dir in "$(DESTDIR)$(infodir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-aminfo clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am: $(DVIS)
html: html-am
html-am: $(HTMLS)
info: info-am
info-am: $(INFO_DEPS)
install-data-am: install-info-am
install-dvi: install-dvi-am
install-dvi-am: $(DVIS)
@$(NORMAL_INSTALL)
test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
done
install-exec-am:
install-html: install-html-am
install-html-am: $(HTMLS)
@$(NORMAL_INSTALL)
test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
for p in $$list; do \
if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
$(am__strip_dir) \
if test -d "$$d$$p"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
$(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
else \
list2="$$list2 $$d$$p"; \
fi; \
done; \
test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
echo "$$ifile"; \
else : ; fi; \
done; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man:
install-pdf: install-pdf-am
install-pdf-am: $(PDFS)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am
install-ps-am: $(PSS)
@$(NORMAL_INSTALL)
test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
@list='$(PSS)'; test -n "$(psdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
pdf: pdf-am
pdf-am: $(PDFS)
ps: ps-am
ps-am: $(PSS)
uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
uninstall-pdf-am uninstall-ps-am
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
dist-info distclean distclean-generic distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-aminfo maintainer-clean-generic \
maintainer-clean-vti mostlyclean mostlyclean-aminfo \
mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
uninstall-info-am uninstall-pdf-am uninstall-ps-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: