;; Predicate definitions for Motorola MCore.
;; Copyright (C) 2005-2020 Free Software Foundation, Inc.
;;
;; This file is part of GCC.
;;
;; GCC is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 3, or (at your option)
;; any later version.
;;
;; GCC is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;;
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; <http://www.gnu.org/licenses/>.
;; Nonzero if OP is a normal arithmetic register.
(define_predicate "mcore_arith_reg_operand"
(match_code "reg,subreg")
{
if (! register_operand (op, mode))
return 0;
if (GET_CODE (op) == SUBREG)
op = SUBREG_REG (op);
if (GET_CODE (op) == REG)
return REGNO (op) != CC_REG;
return 1;
})
;; Nonzero if OP can be source of a simple move operation.
(define_predicate "mcore_general_movsrc_operand"
(match_code "mem,const_int,reg,subreg,symbol_ref,label_ref,const")
{
/* Any (MEM LABEL_REF) is OK. That is a pc-relative load. */
if (GET_CODE (op) == MEM && GET_CODE (XEXP (op, 0)) == LABEL_REF)
return 1;
return general_operand (op, mode);
})
;; Nonzero if OP can be destination of a simple move operation.
(define_predicate "mcore_general_movdst_operand"
(match_code "mem,reg,subreg")
{
if (GET_CODE (op) == REG && REGNO (op) == CC_REG)
return 0;
return general_operand (op, mode);
})
;; Nonzero if OP should be recognized during reload for an ixh/ixw
;; operand. See the ixh/ixw patterns.
(define_predicate "mcore_reload_operand"
(match_code "mem,reg,subreg")
{
if (mcore_arith_reg_operand (op, mode))
return 1;
if (! reload_in_progress)
return 0;
return GET_CODE (op) == MEM;
})
;; Nonzero if OP is a valid source operand for an arithmetic insn.
(define_predicate "mcore_arith_J_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_J (INTVAL (op)))
return 1;
return 0;
})
;; Nonzero if OP is a valid source operand for an arithmetic insn.
(define_predicate "mcore_arith_K_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_K (INTVAL (op)))
return 1;
return 0;
})
;; Nonzero if OP is a valid source operand for a shift or rotate insn.
(define_predicate "mcore_arith_K_operand_not_0"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if ( GET_CODE (op) == CONST_INT
&& CONST_OK_FOR_K (INTVAL (op))
&& INTVAL (op) != 0)
return 1;
return 0;
})
;; TODO: Add a comment here.
(define_predicate "mcore_arith_M_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_M (INTVAL (op)))
return 1;
return 0;
})
;; TODO: Add a comment here.
(define_predicate "mcore_arith_K_S_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT)
{
if (CONST_OK_FOR_K (INTVAL (op)) || (mcore_num_zeros (INTVAL (op)) <= 2))
return 1;
}
return 0;
})
;; Nonzero if OP is a valid source operand for a cmov with two consts
;; +/- 1.
(define_predicate "mcore_arith_O_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_O (INTVAL (op)))
return 1;
return 0;
})
;; Nonzero if OP is a valid source operand for loading.
(define_predicate "mcore_arith_imm_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT && const_ok_for_mcore (INTVAL (op)))
return 1;
return 0;
})
;; TODO: Add a comment here.
(define_predicate "mcore_arith_any_imm_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT)
return 1;
return 0;
})
;; Nonzero if OP is a valid source operand for a btsti.
(define_predicate "mcore_literal_K_operand"
(match_code "const_int")
{
if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_K (INTVAL (op)))
return 1;
return 0;
})
;; Nonzero if OP is a valid source operand for an add/sub insn.
(define_predicate "mcore_addsub_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT)
{
/* The following has been removed because it precludes large constants from being
returned as valid source operands for and add/sub insn. While large
constants may not directly be used in an add/sub, they may if first loaded
into a register. Thus, this predicate should indicate that they are valid,
and the constraint in mcore.md should control whether an additional load to
register is needed. (see mcore.md, addsi). -- DAC 4/2/1998
if (CONST_OK_FOR_J (INTVAL (op)) || CONST_OK_FOR_L (INTVAL (op)))
return 1;
However we do still need to check to make sure that the constant is not too
big, especially if we are running on a 64-bit OS... Nickc 8/1/07. */
if (trunc_int_for_mode (INTVAL (op), mode) != INTVAL (op))
return 0;
return 1;
}
return 0;
})
;; Nonzero if OP is a valid source operand for a compare operation.
(define_predicate "mcore_compare_operand"
(match_code "const_int,reg,subreg")
{
if (register_operand (op, mode))
return 1;
if (GET_CODE (op) == CONST_INT && INTVAL (op) == 0)
return 1;
return 0;
})
;; Return 1 if OP is a load multiple operation. It is known to be a
;; PARALLEL and the first section will be tested.
(define_predicate "mcore_load_multiple_operation"
(match_code "parallel")
{
int count = XVECLEN (op, 0);
int dest_regno;
rtx src_addr;
int i;
/* Perform a quick check so we don't blow up below. */
if (count <= 1
|| GET_CODE (XVECEXP (op, 0, 0)) != SET
|| GET_CODE (SET_DEST (XVECEXP (op, 0, 0))) != REG
|| GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != MEM)
return 0;
dest_regno = REGNO (SET_DEST (XVECEXP (op, 0, 0)));
src_addr = XEXP (SET_SRC (XVECEXP (op, 0, 0)), 0);
for (i = 1; i < count; i++)
{
rtx elt = XVECEXP (op, 0, i);
if (GET_CODE (elt) != SET
|| GET_CODE (SET_DEST (elt)) != REG
|| GET_MODE (SET_DEST (elt)) != SImode
|| REGNO (SET_DEST (elt)) != (unsigned) (dest_regno + i)
|| GET_CODE (SET_SRC (elt)) != MEM
|| GET_MODE (SET_SRC (elt)) != SImode
|| GET_CODE (XEXP (SET_SRC (elt), 0)) != PLUS
|| ! rtx_equal_p (XEXP (XEXP (SET_SRC (elt), 0), 0), src_addr)
|| GET_CODE (XEXP (XEXP (SET_SRC (elt), 0), 1)) != CONST_INT
|| INTVAL (XEXP (XEXP (SET_SRC (elt), 0), 1)) != i * 4)
return 0;
}
return 1;
})
;; Similar, but tests for store multiple.
(define_predicate "mcore_store_multiple_operation"
(match_code "parallel")
{
int count = XVECLEN (op, 0);
int src_regno;
rtx dest_addr;
int i;
/* Perform a quick check so we don't blow up below. */
if (count <= 1
|| GET_CODE (XVECEXP (op, 0, 0)) != SET
|| GET_CODE (SET_DEST (XVECEXP (op, 0, 0))) != MEM
|| GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != REG)
return 0;
src_regno = REGNO (SET_SRC (XVECEXP (op, 0, 0)));
dest_addr = XEXP (SET_DEST (XVECEXP (op, 0, 0)), 0);
for (i = 1; i < count; i++)
{
rtx elt = XVECEXP (op, 0, i);
if (GET_CODE (elt) != SET
|| GET_CODE (SET_SRC (elt)) != REG
|| GET_MODE (SET_SRC (elt)) != SImode
|| REGNO (SET_SRC (elt)) != (unsigned) (src_regno + i)
|| GET_CODE (SET_DEST (elt)) != MEM
|| GET_MODE (SET_DEST (elt)) != SImode
|| GET_CODE (XEXP (SET_DEST (elt), 0)) != PLUS
|| ! rtx_equal_p (XEXP (XEXP (SET_DEST (elt), 0), 0), dest_addr)
|| GET_CODE (XEXP (XEXP (SET_DEST (elt), 0), 1)) != CONST_INT
|| INTVAL (XEXP (XEXP (SET_DEST (elt), 0), 1)) != i * 4)
return 0;
}
return 1;
})
;; TODO: Add a comment here.
(define_predicate "mcore_call_address_operand"
(match_code "reg,subreg,const_int,symbol_ref")
{
return register_operand (op, mode) || CONSTANT_P (op);
})