/* GCC backend definitions for the Renesas RX processor.
Copyright (C) 2008-2020 Free Software Foundation, Inc.
Contributed by Red Hat.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published
by the Free Software Foundation; either version 3, or (at your
option) any later version.
GCC is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#define TARGET_CPU_CPP_BUILTINS() \
do \
{ \
builtin_define ("__RX__"); \
builtin_assert ("cpu=RX"); \
if (rx_cpu_type == RX610) \
{ \
builtin_define ("__RX610__"); \
builtin_assert ("machine=RX610"); \
} \
else if (rx_cpu_type == RX100) \
{ \
builtin_define ("__RX100__"); \
builtin_assert ("machine=RX100"); \
} \
else if (rx_cpu_type == RX200) \
{ \
builtin_define ("__RX200__"); \
builtin_assert ("machine=RX200"); \
} \
else if (rx_cpu_type == RX600) \
{ \
builtin_define ("__RX600__"); \
builtin_assert ("machine=RX600"); \
} \
\
if (TARGET_BIG_ENDIAN_DATA) \
builtin_define ("__RX_BIG_ENDIAN__"); \
else \
builtin_define ("__RX_LITTLE_ENDIAN__");\
\
if (TARGET_64BIT_DOUBLES) \
builtin_define ("__RX_64BIT_DOUBLES__");\
else \
builtin_define ("__RX_32BIT_DOUBLES__");\
\
if (ALLOW_RX_FPU_INSNS) \
builtin_define ("__RX_FPU_INSNS__"); \
\
if (TARGET_AS100_SYNTAX) \
builtin_define ("__RX_AS100_SYNTAX__"); \
else \
builtin_define ("__RX_GAS_SYNTAX__"); \
\
if (TARGET_GCC_ABI) \
builtin_define ("__RX_GCC_ABI__"); \
else \
builtin_define ("__RX_ABI__"); \
\
if (rx_allow_string_insns) \
builtin_define ("__RX_ALLOW_STRING_INSNS__"); \
else \
builtin_define ("__RX_DISALLOW_STRING_INSNS__");\
} \
while (0)
#undef CC1_SPEC
#define CC1_SPEC "\
%{mas100-syntax:%{gdwarf*:%e-mas100-syntax is incompatible with -gdwarf}} \
%{mcpu=rx100:%{fpu:%erx100 cpu does not have FPU hardware}} \
%{mcpu=rx200:%{fpu:%erx200 cpu does not have FPU hardware}}"
#undef STARTFILE_SPEC
#define STARTFILE_SPEC "%{pg:gcrt0.o%s}%{!pg:crt0.o%s} crtbegin.o%s"
#undef ENDFILE_SPEC
#define ENDFILE_SPEC "crtend.o%s crtn.o%s"
#undef CPP_SPEC
#define CPP_SPEC "\
%{mpid:-D_RX_PID=1} \
%{mint-register=*:-D_RX_INT_REGISTERS=%*} \
%{msmall-data-limit*:-D_RX_SMALL_DATA} \
"
#undef ASM_SPEC
#define ASM_SPEC "\
%{mbig-endian-data:-mbig-endian-data} \
%{m64bit-doubles:-m64bit-doubles} \
%{!m64bit-doubles:-m32bit-doubles} \
%{msmall-data-limit*:-msmall-data-limit} \
%{mrelax:-relax} \
%{mpid} \
%{mno-allow-string-insns} \
%{mint-register=*} \
%{mgcc-abi:-mgcc-abi} %{!mgcc-abi:-mrx-abi} \
%{mcpu=*} \
"
#undef LIB_SPEC
#define LIB_SPEC " \
--start-group \
-lc \
%{msim:-lsim}%{!msim:-lnosys} \
%{fprofile-arcs|fprofile-generate|coverage:-lgcov} \
--end-group \
%{!T*: %{msim:%Trx-sim.ld}%{!msim:%Trx.ld}} \
"
#undef LINK_SPEC
#define LINK_SPEC "%{mbig-endian-data:--oformat elf32-rx-be} %{mrelax:-relax}"
#define BITS_BIG_ENDIAN 0
#define BYTES_BIG_ENDIAN TARGET_BIG_ENDIAN_DATA
#define WORDS_BIG_ENDIAN TARGET_BIG_ENDIAN_DATA
#define UNITS_PER_WORD 4
#define INT_TYPE_SIZE 32
#define LONG_TYPE_SIZE 32
#define LONG_LONG_TYPE_SIZE 64
#define FLOAT_TYPE_SIZE 32
#define DOUBLE_TYPE_SIZE (TARGET_64BIT_DOUBLES ? 64 : 32)
#define LONG_DOUBLE_TYPE_SIZE DOUBLE_TYPE_SIZE
#define DEFAULT_SIGNED_CHAR 0
/* RX load/store instructions can handle unaligned addresses. */
#define STRICT_ALIGNMENT 0
#define FUNCTION_BOUNDARY ((rx_cpu_type == RX100 || rx_cpu_type == RX200) ? 4 : 8)
#define BIGGEST_ALIGNMENT 32
#define STACK_BOUNDARY 32
#define PARM_BOUNDARY 8
#define STACK_GROWS_DOWNWARD 1
#define FRAME_GROWS_DOWNWARD 0
#define FIRST_PARM_OFFSET(FNDECL) 0
#define MAX_REGS_PER_ADDRESS 2
#define Pmode SImode
#define POINTER_SIZE 32
#undef SIZE_TYPE
#define SIZE_TYPE "long unsigned int"
#undef PTRDIFF_TYPE
#define PTRDIFF_TYPE "long int"
#undef WCHAR_TYPE
#define WCHAR_TYPE "long int"
#undef WCHAR_TYPE_SIZE
#define WCHAR_TYPE_SIZE BITS_PER_WORD
#define POINTERS_EXTEND_UNSIGNED 1
#define FUNCTION_MODE QImode
#define CASE_VECTOR_MODE Pmode
#define WORD_REGISTER_OPERATIONS 1
#define HAS_LONG_COND_BRANCH 0
#define HAS_LONG_UNCOND_BRANCH 0
#define MOVE_MAX 4
#define HAVE_PRE_DECREMENT 1
#define HAVE_POST_INCREMENT 1
#define MOVE_RATIO(SPEED) ((SPEED) ? 4 : 2)
#define SLOW_BYTE_ACCESS 1
#define STORE_FLAG_VALUE 1
#define LOAD_EXTEND_OP(MODE) SIGN_EXTEND
#define SHORT_IMMEDIATES_SIGN_EXTEND 1
enum reg_class
{
NO_REGS, /* No registers in set. */
GR_REGS, /* Integer registers. */
ALL_REGS, /* All registers. */
LIM_REG_CLASSES /* Max value + 1. */
};
#define REG_CLASS_NAMES \
{ \
"NO_REGS", \
"GR_REGS", \
"ALL_REGS" \
}
#define REG_CLASS_CONTENTS \
{ \
{ 0x00000000 }, /* No registers, */ \
{ 0x0000ffff }, /* Integer registers. */ \
{ 0x0000ffff } /* All registers. */ \
}
#define N_REG_CLASSES (int) LIM_REG_CLASSES
#define CLASS_MAX_NREGS(CLASS, MODE) ((GET_MODE_SIZE (MODE) \
+ UNITS_PER_WORD - 1) \
/ UNITS_PER_WORD)
#define GENERAL_REGS GR_REGS
#define BASE_REG_CLASS GR_REGS
#define INDEX_REG_CLASS GR_REGS
#define FIRST_PSEUDO_REGISTER 17
#define REGNO_REG_CLASS(REGNO) ((REGNO) < FIRST_PSEUDO_REGISTER \
? GR_REGS : NO_REGS)
#define STACK_POINTER_REGNUM 0
#define FUNC_RETURN_REGNUM 1
#define FRAME_POINTER_REGNUM 6
#define ARG_POINTER_REGNUM 7
#define STATIC_CHAIN_REGNUM 8
#define TRAMPOLINE_TEMP_REGNUM 9
#define STRUCT_VAL_REGNUM 15
#define CC_REGNUM 16
/* This is the register which will probably be used to hold the address of
the start of the small data area, if -msmall-data-limit is being used,
or the address of the constant data area if -mpid is being used. If both
features are in use then two consecutive registers will be used.
Note - these registers must not be call_used because otherwise library
functions that are compiled without -msmall-data-limit/-mpid support
might clobber them.
Note that the actual values used depends on other options; use
rx_gp_base_regnum() and rx_pid_base_regnum() instead. */
#define GP_BASE_REGNUM 13
#define ELIMINABLE_REGS \
{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \
{ ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM }, \
{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }}
#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
(OFFSET) = rx_initial_elimination_offset ((FROM), (TO))
#define FUNCTION_ARG_REGNO_P(N) (((N) >= 1) && ((N) <= 4))
#define FUNCTION_VALUE_REGNO_P(N) ((N) == FUNC_RETURN_REGNUM)
#define DEFAULT_PCC_STRUCT_RETURN 0
#define FIXED_REGISTERS \
{ \
1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1 \
}
#define CALL_USED_REGISTERS \
{ \
1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1 \
}
#define LIBCALL_VALUE(MODE) \
gen_rtx_REG (((GET_MODE_CLASS (MODE) != MODE_INT \
|| COMPLEX_MODE_P (MODE) \
|| VECTOR_MODE_P (MODE) \
|| GET_MODE_SIZE (MODE) >= 4) \
? (MODE) \
: SImode), \
FUNC_RETURN_REGNUM)
/* Order of allocation of registers. */
#define REG_ALLOC_ORDER \
{ 7, 10, 11, 12, 13, 14, 4, 3, 2, 1, 9, 8, 6, 5, 15 \
}
#define REGNO_IN_RANGE(REGNO, MIN, MAX) \
(IN_RANGE ((REGNO), (MIN), (MAX)) \
|| (reg_renumber != NULL \
&& reg_renumber[(REGNO)] >= (MIN) \
&& reg_renumber[(REGNO)] <= (MAX)))
#ifdef REG_OK_STRICT
#define REGNO_OK_FOR_BASE_P(regno) REGNO_IN_RANGE (regno, 0, 15)
#else
#define REGNO_OK_FOR_BASE_P(regno) 1
#endif
#define REGNO_OK_FOR_INDEX_P(regno) REGNO_OK_FOR_BASE_P (regno)
#define RTX_OK_FOR_BASE(X, STRICT) \
((STRICT) ? \
( (REG_P (X) \
&& REGNO_IN_RANGE (REGNO (X), 0, 15)) \
|| (GET_CODE (X) == SUBREG \
&& REG_P (SUBREG_REG (X)) \
&& REGNO_IN_RANGE (REGNO (SUBREG_REG (X)), 0, 15))) \
: \
( (REG_P (X) \
|| (GET_CODE (X) == SUBREG \
&& REG_P (SUBREG_REG (X))))))
#define RETURN_ADDR_RTX(COUNT, FRAMEADDR) \
((COUNT) == 0 \
? gen_rtx_MEM (Pmode, gen_rtx_PLUS (Pmode, arg_pointer_rtx, GEN_INT (-4))) \
: NULL_RTX)
#define INCOMING_RETURN_ADDR_RTX gen_rtx_MEM (Pmode, stack_pointer_rtx)
#define ACCUMULATE_OUTGOING_ARGS 1
typedef unsigned int CUMULATIVE_ARGS;
#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
(CUM) = 0
#define TRAMPOLINE_SIZE (! TARGET_BIG_ENDIAN_DATA ? 14 : 20)
#define TRAMPOLINE_ALIGNMENT 32
#define NO_PROFILE_COUNTERS 1
#define PROFILE_BEFORE_PROLOGUE 1
#define FUNCTION_PROFILER(FILE, LABELNO) \
fprintf (FILE, "\tbsr\t__mcount\n");
#define REGISTER_NAMES \
{ \
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", "cc" \
}
#define ADDITIONAL_REGISTER_NAMES \
{ \
{ "sp", STACK_POINTER_REGNUM } \
, { "fp", FRAME_POINTER_REGNUM } \
, { "arg", ARG_POINTER_REGNUM } \
, { "chain", STATIC_CHAIN_REGNUM } \
}
#define DATA_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION D,DATA" \
: "\t.section D,\"aw\",@progbits\n\t.p2align 2")
#define SDATA_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION D_2,DATA,ALIGN=2" \
: "\t.section D_2,\"aw\",@progbits\n\t.p2align 1")
#undef READONLY_DATA_SECTION_ASM_OP
#define READONLY_DATA_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION C,ROMDATA,ALIGN=4" \
: "\t.section C,\"a\",@progbits\n\t.p2align 2")
#define BSS_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION B,DATA,ALIGN=4" \
: "\t.section B,\"w\",@nobits\n\t.p2align 2")
#define SBSS_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION B_2,DATA,ALIGN=2" \
: "\t.section B_2,\"w\",@nobits\n\t.p2align 1")
/* The following definitions are conditional depending upon whether the
compiler is being built or crtstuff.c is being compiled by the built
compiler. */
#if defined CRT_BEGIN || defined CRT_END
# ifdef __RX_AS100_SYNTAX
# define TEXT_SECTION_ASM_OP "\t.SECTION P,CODE"
# define CTORS_SECTION_ASM_OP "\t.SECTION init_array,CODE"
# define DTORS_SECTION_ASM_OP "\t.SECTION fini_array,CODE"
# define INIT_ARRAY_SECTION_ASM_OP "\t.SECTION init_array,CODE"
# define FINI_ARRAY_SECTION_ASM_OP "\t.SECTION fini_array,CODE"
# else
# define TEXT_SECTION_ASM_OP "\t.section P,\"ax\""
# define CTORS_SECTION_ASM_OP \
"\t.section\t.init_array,\"awx\",@init_array"
# define DTORS_SECTION_ASM_OP \
"\t.section\t.fini_array,\"awx\",@fini_array"
# define INIT_ARRAY_SECTION_ASM_OP \
"\t.section\t.init_array,\"awx\",@init_array"
# define FINI_ARRAY_SECTION_ASM_OP \
"\t.section\t.fini_array,\"awx\",@fini_array"
# endif
#else
# define TEXT_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION P,CODE" : "\t.section P,\"ax\"")
# define CTORS_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION init_array,CODE" \
: "\t.section\t.init_array,\"awx\",@init_array")
# define DTORS_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION fini_array,CODE" \
: "\t.section\t.fini_array,\"awx\",@fini_array")
# define INIT_ARRAY_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION init_array,CODE" \
: "\t.section\t.init_array,\"awx\",@init_array")
# define FINI_ARRAY_SECTION_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.SECTION fini_array,CODE" \
: "\t.section\t.fini_array,\"awx\",@fini_array")
#endif
#define GLOBAL_ASM_OP \
(TARGET_AS100_SYNTAX ? "\t.GLB\t" : "\t.global\t")
#define ASM_COMMENT_START " ;"
#undef ASM_APP_ON
#define ASM_APP_ON ""
#undef ASM_APP_OFF
#define ASM_APP_OFF ""
#define LOCAL_LABEL_PREFIX "L"
#undef USER_LABEL_PREFIX
#define USER_LABEL_PREFIX "_"
/* Compute the alignment needed for label X in various situations.
If the user has specified an alignment then honour that, otherwise
use rx_align_for_label. */
#define JUMP_ALIGN(x) (align_jumps.levels[0].log > 0 ? align_jumps : align_flags (rx_align_for_label (x, 0)))
#define LABEL_ALIGN(x) (align_labels.levels[0].log > 0 ? align_labels : align_flags (rx_align_for_label (x, 3)))
#define LOOP_ALIGN(x) (align_loops.levels[0].log > 0 ? align_loops : align_flags (rx_align_for_label (x, 2)))
#define LABEL_ALIGN_AFTER_BARRIER(x) rx_align_for_label (x, 0)
#define ASM_OUTPUT_MAX_SKIP_ALIGN(STREAM, LOG, MAX_SKIP) \
do \
{ \
if ((LOG) == 0 || (MAX_SKIP) == 0) \
break; \
if (TARGET_AS100_SYNTAX) \
{ \
if ((LOG) >= 2) \
fprintf (STREAM, "\t.ALIGN 4\t; %d alignment actually requested\n", 1 << (LOG)); \
else \
fprintf (STREAM, "\t.ALIGN 2\n"); \
} \
else \
fprintf (STREAM, "\t.balign %d,3,%d\n", 1 << (LOG), (MAX_SKIP)); \
} \
while (0)
#define ASM_OUTPUT_ALIGN(STREAM, LOG) \
do \
{ \
if ((LOG) == 0) \
break; \
if (TARGET_AS100_SYNTAX) \
{ \
if ((LOG) >= 2) \
fprintf (STREAM, "\t.ALIGN 4\t; %d alignment actually requested\n", 1 << (LOG)); \
else \
fprintf (STREAM, "\t.ALIGN 2\n"); \
} \
else \
fprintf (STREAM, "\t.balign %d\n", 1 << (LOG)); \
} \
while (0)
#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
fprintf (FILE, TARGET_AS100_SYNTAX ? "\t.LWORD L%d\n" : "\t.long .L%d\n", \
VALUE)
/* This is how to output an element of a case-vector that is relative.
Note: The local label referenced by the "1b" below is emitted by
the tablejump insn. */
#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
fprintf (FILE, TARGET_AS100_SYNTAX \
? "\t.LWORD L%d - ?-\n" : "\t.long .L%d - 1b\n", VALUE)
#define CASE_VECTOR_PC_RELATIVE (TARGET_PID)
#define ASM_OUTPUT_SIZE_DIRECTIVE(STREAM, NAME, SIZE) \
do \
{ \
HOST_WIDE_INT size_ = (SIZE); \
\
/* The as100 assembler does not have an equivalent of the SVR4 \
.size pseudo-op. */ \
if (TARGET_AS100_SYNTAX) \
break; \
\
fputs (SIZE_ASM_OP, STREAM); \
assemble_name (STREAM, NAME); \
fprintf (STREAM, ", " HOST_WIDE_INT_PRINT_DEC "\n", size_); \
} \
while (0)
#define ASM_OUTPUT_MEASURED_SIZE(STREAM, NAME) \
do \
{ \
/* The as100 assembler does not have an equivalent of the SVR4 \
.size pseudo-op. */ \
if (TARGET_AS100_SYNTAX) \
break; \
fputs (SIZE_ASM_OP, STREAM); \
assemble_name (STREAM, NAME); \
fputs (", .-", STREAM); \
assemble_name (STREAM, NAME); \
putc ('\n', STREAM); \
} \
while (0)
#define ASM_OUTPUT_TYPE_DIRECTIVE(STREAM, NAME, TYPE) \
do \
{ \
/* The as100 assembler does not have an equivalent of the SVR4 \
.size pseudo-op. */ \
if (TARGET_AS100_SYNTAX) \
break; \
fputs (TYPE_ASM_OP, STREAM); \
assemble_name (STREAM, NAME); \
fputs (", ", STREAM); \
fprintf (STREAM, TYPE_OPERAND_FMT, TYPE); \
putc ('\n', STREAM); \
} \
while (0)
#undef ASM_GENERATE_INTERNAL_LABEL
#define ASM_GENERATE_INTERNAL_LABEL(LABEL, PREFIX, NUM) \
do \
{ \
sprintf (LABEL, TARGET_AS100_SYNTAX ? "*%s%u" : "*.%s%u", \
PREFIX, (unsigned) (NUM)); \
} \
while (0)
#undef ASM_OUTPUT_EXTERNAL
#define ASM_OUTPUT_EXTERNAL(FILE, DECL, NAME) \
do \
{ \
if (TARGET_AS100_SYNTAX) \
targetm.asm_out.globalize_label (FILE, NAME); \
default_elf_asm_output_external (FILE, DECL, NAME); \
} \
while (0)
#undef ASM_OUTPUT_ALIGNED_COMMON
#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN) \
do \
{ \
if (TARGET_AS100_SYNTAX) \
{ \
fprintf ((FILE), "\t.GLB\t"); \
assemble_name ((FILE), (NAME)); \
fprintf ((FILE), "\n"); \
assemble_name ((FILE), (NAME)); \
switch ((ALIGN) / BITS_PER_UNIT) \
{ \
case 4: \
fprintf ((FILE), ":\t.BLKL\t" HOST_WIDE_INT_PRINT_UNSIGNED"\n",\
(SIZE) / 4); \
break; \
case 2: \
fprintf ((FILE), ":\t.BLKW\t" HOST_WIDE_INT_PRINT_UNSIGNED"\n",\
(SIZE) / 2); \
break; \
default: \
fprintf ((FILE), ":\t.BLKB\t" HOST_WIDE_INT_PRINT_UNSIGNED"\n",\
(SIZE)); \
break; \
} \
} \
else \
{ \
fprintf ((FILE), "%s", COMMON_ASM_OP); \
assemble_name ((FILE), (NAME)); \
fprintf ((FILE), "," HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \
(SIZE), (ALIGN) / BITS_PER_UNIT); \
} \
} \
while (0)
#undef SKIP_ASM_OP
#define SKIP_ASM_OP (TARGET_AS100_SYNTAX ? "\t.BLKB\t" : "\t.zero\t")
#undef ASM_OUTPUT_LIMITED_STRING
#define ASM_OUTPUT_LIMITED_STRING(FILE, STR) \
do \
{ \
const unsigned char *_limited_str = \
(const unsigned char *) (STR); \
unsigned ch; \
\
fprintf ((FILE), TARGET_AS100_SYNTAX \
? "\t.BYTE\t\"" : "\t.string\t\""); \
\
for (; (ch = *_limited_str); _limited_str++) \
{ \
int escape; \
\
switch (escape = ESCAPES[ch]) \
{ \
case 0: \
putc (ch, (FILE)); \
break; \
case 1: \
fprintf ((FILE), "\\%03o", ch); \
break; \
default: \
putc ('\\', (FILE)); \
putc (escape, (FILE)); \
break; \
} \
} \
\
fprintf ((FILE), TARGET_AS100_SYNTAX ? "\"\n\t.BYTE\t0\n" : "\"\n");\
} \
while (0)
/* For PIC put jump tables into the text section so that the offsets that
they contain are always computed between two same-section symbols. */
#define JUMP_TABLES_IN_TEXT_SECTION (TARGET_PID || flag_pic)
/* This is a version of REG_P that also returns TRUE for SUBREGs. */
#define RX_REG_P(rtl) (REG_P (rtl) || GET_CODE (rtl) == SUBREG)
/* Like REG_P except that this macro is true for SET expressions. */
#define SET_P(rtl) (GET_CODE (rtl) == SET)
/* The AS100 assembler does not support .leb128 and .uleb128, but
the compiler-build-time configure tests will have enabled their
use because GAS supports them. So default to generating STABS
debug information instead of DWARF2 when generating AS100
compatible output. */
#undef PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE (TARGET_AS100_SYNTAX \
? DBX_DEBUG : DWARF2_DEBUG)
#define INCOMING_FRAME_SP_OFFSET 4
#define ARG_POINTER_CFA_OFFSET(FNDECL) 4
#define TARGET_USE_FPU (! TARGET_NO_USE_FPU)
/* This macro is used to decide when RX FPU instructions can be used. */
#define ALLOW_RX_FPU_INSNS (TARGET_USE_FPU)
#define BRANCH_COST(SPEED,PREDICT) 1
#define REGISTER_MOVE_COST(MODE,FROM,TO) 2
#define SELECT_CC_MODE(OP,X,Y) rx_select_cc_mode(OP, X, Y)
#define ADJUST_INSN_LENGTH(INSN,LENGTH) \
do \
{ \
(LENGTH) = rx_adjust_insn_length ((INSN), (LENGTH)); \
} \
while (0)