# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#   Copyright (C) 2012-2020 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3.  If not see
# <http://www.gnu.org/licenses/>.
#
VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
	$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/gettext-sister.m4 \
	$(top_srcdir)/../config/iconv.m4 \
	$(top_srcdir)/../config/largefile.m4 \
	$(top_srcdir)/../config/lcmessage.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/lib-ld.m4 \
	$(top_srcdir)/../config/lib-link.m4 \
	$(top_srcdir)/../config/lib-prefix.m4 \
	$(top_srcdir)/../config/nls.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/plugins.m4 \
	$(top_srcdir)/../config/po.m4 \
	$(top_srcdir)/../config/progtest.m4 \
	$(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
	$(top_srcdir)/../bfd/version.m4 \
	$(top_srcdir)/../config/debuginfod.m4 \
	$(top_srcdir)/../config/pkg.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo "  DVIPS   " $@;
am__v_DVIPS_1 = 
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
am__v_MAKEINFO_1 = 
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
am__v_INFOHTML_1 = 
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
am__v_TEXI2DVI_1 = 
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
am__v_TEXI2PDF_1 = 
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 = 
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 = 
INFO_DEPS = binutils.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = binutils.dvi
PDFS = binutils.pdf
PSS = binutils.ps
HTMLS = binutils.html
TEXINFOS = binutils.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_DLLTOOL = @BUILD_DLLTOOL@
BUILD_DLLWRAP = @BUILD_DLLWRAP@
BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
BUILD_MISC = @BUILD_MISC@
BUILD_SRCONV = @BUILD_SRCONV@
BUILD_WINDMC = @BUILD_WINDMC@
BUILD_WINDRES = @BUILD_WINDRES@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
DEFS = @DEFS@
DEMANGLER_NAME = @DEMANGLER_NAME@
DEPDIR = @DEPDIR@
DLLTOOL_DEFS = @DLLTOOL_DEFS@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMULATION = @EMULATION@
EMULATION_VECTOR = @EMULATION_VECTOR@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
HDEFINES = @HDEFINES@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
NO_WERROR = @NO_WERROR@
OBJDUMP = @OBJDUMP@
OBJDUMP_DEFS = @OBJDUMP_DEFS@
OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
POSUB = @POSUB@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
XGETTEXT = @XGETTEXT@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign

# What version of the manual you want; "all" includes everything
CONFIG = all

# Options to extract the man page from as.texinfo
MANCONF = -Dman
TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
POD2MAN = pod2man --center="GNU Development Tools" \
	 --release="binutils-$(VERSION)" --section=1


# List of man pages generated from binutils.texi
man_MANS = \
	addr2line.1 \
	ar.1 \
	dlltool.1 \
	nm.1 \
	objcopy.1 \
	objdump.1 \
	ranlib.1 \
	readelf.1 \
	size.1 \
	strings.1 \
	strip.1 \
	elfedit.1 \
	windres.1 \
	windmc.1 \
	$(DEMANGLER_NAME).1

info_TEXINFOS = binutils.texi
binutils_TEXI = $(srcdir)/binutils.texi
AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
		   -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc

TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
		    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc

MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

binutils.info: binutils.texi 
	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

binutils.dvi: binutils.texi  
	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
	`test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi

binutils.pdf: binutils.texi  
	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
	`test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi

binutils.html: binutils.texi  
	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
	then \
	  rm -rf $@ && mv $(@:.html=.htp) $@; \
	else \
	  rm -rf $(@:.html=.htp); exit 1; \
	fi
.dvi.ps:
	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) $(AM_V_texinfo) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf binutils.t2d binutils.t2p

clean-aminfo:
	-test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
	|| rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
tags TAGS:

ctags CTAGS:

cscope cscopelist:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS) info-local

install-data-am: install-info-am install-man

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  d2=$$d$$p; \
	  if test -d "$$d2"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d2"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
	fi; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-pdf-am uninstall-ps-am

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
	clean-libtool cscopelist-am ctags-am dist-info distclean \
	distclean-generic distclean-libtool distdir dvi dvi-am html \
	html-am info info-am info-local install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-man1 \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags-am uninstall uninstall-am uninstall-dvi-am \
	uninstall-html-am uninstall-info-am uninstall-man \
	uninstall-man1 uninstall-pdf-am uninstall-ps-am

.PRECIOUS: Makefile


# Man page generation from texinfo
addr2line.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
	-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f addr2line.pod

ar.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
	-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f ar.pod

dlltool.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
	-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f dlltool.pod

nm.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
	-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f nm.pod

objcopy.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
	-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f objcopy.pod

objdump.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
	-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f objdump.pod

ranlib.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
	-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f ranlib.pod

readelf.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
	-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f readelf.pod

size.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
	-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f size.pod

strings.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
	-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f strings.pod

strip.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
	-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f strip.pod

elfedit.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
	-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f elfedit.pod

windres.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
	-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f windres.pod

windmc.1:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
	-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f windmc.pod

cxxfilt.man:	$(binutils_TEXI)
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
	-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
		mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
	rm -f $(DEMANGLER_NAME).pod

$(DEMANGLER_NAME).1: cxxfilt.man Makefile
	if test -f cxxfilt.man; then \
	  man=cxxfilt.man; \
	else \
	  man=$(srcdir)/cxxfilt.man; \
	fi; \
	sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
	    -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
		> $(DEMANGLER_NAME).1

# Maintenance

# We need it for the taz target in ../../Makefile.in.
info-local: $(MANS)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: