/*
* Common hostapd/wpa_supplicant HW features
* Copyright (c) 2002-2013, Jouni Malinen <j@w1.fi>
* Copyright (c) 2015, Qualcomm Atheros, Inc.
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/
#include "includes.h"
#include "common.h"
#include "defs.h"
#include "ieee802_11_defs.h"
#include "ieee802_11_common.h"
#include "hw_features_common.h"
struct hostapd_channel_data * hw_get_channel_chan(struct hostapd_hw_modes *mode,
int chan, int *freq)
{
int i;
if (freq)
*freq = 0;
if (!mode)
return NULL;
for (i = 0; i < mode->num_channels; i++) {
struct hostapd_channel_data *ch = &mode->channels[i];
if (ch->chan == chan) {
if (freq)
*freq = ch->freq;
return ch;
}
}
return NULL;
}
struct hostapd_channel_data * hw_get_channel_freq(struct hostapd_hw_modes *mode,
int freq, int *chan)
{
int i;
if (chan)
*chan = 0;
if (!mode)
return NULL;
for (i = 0; i < mode->num_channels; i++) {
struct hostapd_channel_data *ch = &mode->channels[i];
if (ch->freq == freq) {
if (chan)
*chan = ch->chan;
return ch;
}
}
return NULL;
}
int hw_get_freq(struct hostapd_hw_modes *mode, int chan)
{
int freq;
hw_get_channel_chan(mode, chan, &freq);
return freq;
}
int hw_get_chan(struct hostapd_hw_modes *mode, int freq)
{
int chan;
hw_get_channel_freq(mode, freq, &chan);
return chan;
}
int allowed_ht40_channel_pair(struct hostapd_hw_modes *mode, int pri_chan,
int sec_chan)
{
int ok, first;
int allowed[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 140,
149, 157, 165, 184, 192 };
size_t k;
struct hostapd_channel_data *p_chan, *s_chan;
const int ht40_plus = pri_chan < sec_chan;
p_chan = hw_get_channel_chan(mode, pri_chan, NULL);
if (!p_chan)
return 0;
if (pri_chan == sec_chan || !sec_chan) {
if (chan_pri_allowed(p_chan))
return 1; /* HT40 not used */
wpa_printf(MSG_ERROR, "Channel %d is not allowed as primary",
pri_chan);
return 0;
}
s_chan = hw_get_channel_chan(mode, sec_chan, NULL);
if (!s_chan)
return 0;
wpa_printf(MSG_DEBUG,
"HT40: control channel: %d secondary channel: %d",
pri_chan, sec_chan);
/* Verify that HT40 secondary channel is an allowed 20 MHz
* channel */
if ((s_chan->flag & HOSTAPD_CHAN_DISABLED) ||
(ht40_plus && !(p_chan->allowed_bw & HOSTAPD_CHAN_WIDTH_40P)) ||
(!ht40_plus && !(p_chan->allowed_bw & HOSTAPD_CHAN_WIDTH_40M))) {
wpa_printf(MSG_ERROR, "HT40 secondary channel %d not allowed",
sec_chan);
return 0;
}
/*
* Verify that HT40 primary,secondary channel pair is allowed per
* IEEE 802.11n Annex J. This is only needed for 5 GHz band since
* 2.4 GHz rules allow all cases where the secondary channel fits into
* the list of allowed channels (already checked above).
*/
if (mode->mode != HOSTAPD_MODE_IEEE80211A)
return 1;
first = pri_chan < sec_chan ? pri_chan : sec_chan;
ok = 0;
for (k = 0; k < ARRAY_SIZE(allowed); k++) {
if (first == allowed[k]) {
ok = 1;
break;
}
}
if (!ok) {
wpa_printf(MSG_ERROR, "HT40 channel pair (%d, %d) not allowed",
pri_chan, sec_chan);
return 0;
}
return 1;
}
void get_pri_sec_chan(struct wpa_scan_res *bss, int *pri_chan, int *sec_chan)
{
struct ieee80211_ht_operation *oper;
struct ieee802_11_elems elems;
*pri_chan = *sec_chan = 0;
ieee802_11_parse_elems((u8 *) (bss + 1), bss->ie_len, &elems, 0);
if (elems.ht_operation) {
oper = (struct ieee80211_ht_operation *) elems.ht_operation;
*pri_chan = oper->primary_chan;
if (oper->ht_param & HT_INFO_HT_PARAM_STA_CHNL_WIDTH) {
int sec = oper->ht_param &
HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK;
if (sec == HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE)
*sec_chan = *pri_chan + 4;
else if (sec == HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW)
*sec_chan = *pri_chan - 4;
}
}
}
int check_40mhz_5g(struct hostapd_hw_modes *mode,
struct wpa_scan_results *scan_res, int pri_chan,
int sec_chan)
{
int pri_freq, sec_freq, pri_bss, sec_bss;
int bss_pri_chan, bss_sec_chan;
size_t i;
int match;
if (!mode || !scan_res || !pri_chan || !sec_chan ||
pri_chan == sec_chan)
return 0;
pri_freq = hw_get_freq(mode, pri_chan);
sec_freq = hw_get_freq(mode, sec_chan);
/*
* Switch PRI/SEC channels if Beacons were detected on selected SEC
* channel, but not on selected PRI channel.
*/
pri_bss = sec_bss = 0;
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *bss = scan_res->res[i];
if (bss->freq == pri_freq)
pri_bss++;
else if (bss->freq == sec_freq)
sec_bss++;
}
if (sec_bss && !pri_bss) {
wpa_printf(MSG_INFO,
"Switch own primary and secondary channel to get secondary channel with no Beacons from other BSSes");
return 2;
}
/*
* Match PRI/SEC channel with any existing HT40 BSS on the same
* channels that we are about to use (if already mixed order in
* existing BSSes, use own preference).
*/
match = 0;
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *bss = scan_res->res[i];
get_pri_sec_chan(bss, &bss_pri_chan, &bss_sec_chan);
if (pri_chan == bss_pri_chan &&
sec_chan == bss_sec_chan) {
match = 1;
break;
}
}
if (!match) {
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *bss = scan_res->res[i];
get_pri_sec_chan(bss, &bss_pri_chan, &bss_sec_chan);
if (pri_chan == bss_sec_chan &&
sec_chan == bss_pri_chan) {
wpa_printf(MSG_INFO, "Switch own primary and "
"secondary channel due to BSS "
"overlap with " MACSTR,
MAC2STR(bss->bssid));
return 2;
}
}
}
return 1;
}
static int check_20mhz_bss(struct wpa_scan_res *bss, int pri_freq, int start,
int end)
{
struct ieee802_11_elems elems;
struct ieee80211_ht_operation *oper;
if (bss->freq < start || bss->freq > end || bss->freq == pri_freq)
return 0;
ieee802_11_parse_elems((u8 *) (bss + 1), bss->ie_len, &elems, 0);
if (!elems.ht_capabilities) {
wpa_printf(MSG_DEBUG, "Found overlapping legacy BSS: "
MACSTR " freq=%d", MAC2STR(bss->bssid), bss->freq);
return 1;
}
if (elems.ht_operation) {
oper = (struct ieee80211_ht_operation *) elems.ht_operation;
if (oper->ht_param & HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK)
return 0;
wpa_printf(MSG_DEBUG, "Found overlapping 20 MHz HT BSS: "
MACSTR " freq=%d", MAC2STR(bss->bssid), bss->freq);
return 1;
}
return 0;
}
int check_40mhz_2g4(struct hostapd_hw_modes *mode,
struct wpa_scan_results *scan_res, int pri_chan,
int sec_chan)
{
int pri_freq, sec_freq;
int affected_start, affected_end;
size_t i;
if (!mode || !scan_res || !pri_chan || !sec_chan ||
pri_chan == sec_chan)
return 0;
pri_freq = hw_get_freq(mode, pri_chan);
sec_freq = hw_get_freq(mode, sec_chan);
affected_start = (pri_freq + sec_freq) / 2 - 25;
affected_end = (pri_freq + sec_freq) / 2 + 25;
wpa_printf(MSG_DEBUG, "40 MHz affected channel range: [%d,%d] MHz",
affected_start, affected_end);
for (i = 0; i < scan_res->num; i++) {
struct wpa_scan_res *bss = scan_res->res[i];
int pri = bss->freq;
int sec = pri;
struct ieee802_11_elems elems;
/* Check for overlapping 20 MHz BSS */
if (check_20mhz_bss(bss, pri_freq, affected_start,
affected_end)) {
wpa_printf(MSG_DEBUG,
"Overlapping 20 MHz BSS is found");
return 0;
}
get_pri_sec_chan(bss, &pri_chan, &sec_chan);
if (sec_chan) {
if (sec_chan < pri_chan)
sec = pri - 20;
else
sec = pri + 20;
}
if ((pri < affected_start || pri > affected_end) &&
(sec < affected_start || sec > affected_end))
continue; /* not within affected channel range */
wpa_printf(MSG_DEBUG, "Neighboring BSS: " MACSTR
" freq=%d pri=%d sec=%d",
MAC2STR(bss->bssid), bss->freq, pri_chan, sec_chan);
if (sec_chan) {
if (pri_freq != pri || sec_freq != sec) {
wpa_printf(MSG_DEBUG,
"40 MHz pri/sec mismatch with BSS "
MACSTR
" <%d,%d> (chan=%d%c) vs. <%d,%d>",
MAC2STR(bss->bssid),
pri, sec, pri_chan,
sec > pri ? '+' : '-',
pri_freq, sec_freq);
return 0;
}
}
ieee802_11_parse_elems((u8 *) (bss + 1), bss->ie_len, &elems,
0);
if (elems.ht_capabilities) {
struct ieee80211_ht_capabilities *ht_cap =
(struct ieee80211_ht_capabilities *)
elems.ht_capabilities;
if (le_to_host16(ht_cap->ht_capabilities_info) &
HT_CAP_INFO_40MHZ_INTOLERANT) {
wpa_printf(MSG_DEBUG,
"40 MHz Intolerant is set on channel %d in BSS "
MACSTR, pri, MAC2STR(bss->bssid));
return 0;
}
}
}
return 1;
}
int hostapd_set_freq_params(struct hostapd_freq_params *data,
enum hostapd_hw_mode mode,
int freq, int channel, int ht_enabled,
int vht_enabled, int he_enabled,
int sec_channel_offset,
int oper_chwidth, int center_segment0,
int center_segment1, u32 vht_caps,
struct he_capabilities *he_cap)
{
if (!he_cap)
he_enabled = 0;
os_memset(data, 0, sizeof(*data));
data->mode = mode;
data->freq = freq;
data->channel = channel;
data->ht_enabled = ht_enabled;
data->vht_enabled = vht_enabled;
data->he_enabled = he_enabled;
data->sec_channel_offset = sec_channel_offset;
data->center_freq1 = freq + sec_channel_offset * 10;
data->center_freq2 = 0;
data->bandwidth = sec_channel_offset ? 40 : 20;
if (data->vht_enabled) switch (oper_chwidth) {
case CHANWIDTH_USE_HT:
if (center_segment1 ||
(center_segment0 != 0 &&
5000 + center_segment0 * 5 != data->center_freq1 &&
2407 + center_segment0 * 5 != data->center_freq1))
return -1;
break;
case CHANWIDTH_80P80MHZ:
if (!(vht_caps & VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)) {
wpa_printf(MSG_ERROR,
"80+80 channel width is not supported!");
return -1;
}
if (center_segment1 == center_segment0 + 4 ||
center_segment1 == center_segment0 - 4)
return -1;
data->center_freq2 = 5000 + center_segment1 * 5;
/* fall through */
case CHANWIDTH_80MHZ:
data->bandwidth = 80;
if ((oper_chwidth == CHANWIDTH_80MHZ &&
center_segment1) ||
(oper_chwidth == CHANWIDTH_80P80MHZ &&
!center_segment1) ||
!sec_channel_offset)
return -1;
if (!center_segment0) {
if (channel <= 48)
center_segment0 = 42;
else if (channel <= 64)
center_segment0 = 58;
else if (channel <= 112)
center_segment0 = 106;
else if (channel <= 128)
center_segment0 = 122;
else if (channel <= 144)
center_segment0 = 138;
else if (channel <= 161)
center_segment0 = 155;
data->center_freq1 = 5000 + center_segment0 * 5;
} else {
/*
* Note: HT/VHT config and params are coupled. Check if
* HT40 channel band is in VHT80 Pri channel band
* configuration.
*/
if (center_segment0 == channel + 6 ||
center_segment0 == channel + 2 ||
center_segment0 == channel - 2 ||
center_segment0 == channel - 6)
data->center_freq1 = 5000 + center_segment0 * 5;
else
return -1;
}
break;
case CHANWIDTH_160MHZ:
data->bandwidth = 160;
if (!(vht_caps & (VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ))) {
wpa_printf(MSG_ERROR,
"160MHZ channel width is not supported!");
return -1;
}
if (center_segment1)
return -1;
if (!sec_channel_offset)
return -1;
/*
* Note: HT/VHT config and params are coupled. Check if
* HT40 channel band is in VHT160 channel band configuration.
*/
if (center_segment0 == channel + 14 ||
center_segment0 == channel + 10 ||
center_segment0 == channel + 6 ||
center_segment0 == channel + 2 ||
center_segment0 == channel - 2 ||
center_segment0 == channel - 6 ||
center_segment0 == channel - 10 ||
center_segment0 == channel - 14)
data->center_freq1 = 5000 + center_segment0 * 5;
else
return -1;
break;
}
return 0;
}
void set_disable_ht40(struct ieee80211_ht_capabilities *htcaps,
int disabled)
{
/* Masking these out disables HT40 */
le16 msk = host_to_le16(HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET |
HT_CAP_INFO_SHORT_GI40MHZ);
if (disabled)
htcaps->ht_capabilities_info &= ~msk;
else
htcaps->ht_capabilities_info |= msk;
}
#ifdef CONFIG_IEEE80211AC
static int _ieee80211ac_cap_check(u32 hw, u32 conf, u32 cap,
const char *name)
{
u32 req_cap = conf & cap;
/*
* Make sure we support all requested capabilities.
* NOTE: We assume that 'cap' represents a capability mask,
* not a discrete value.
*/
if ((hw & req_cap) != req_cap) {
wpa_printf(MSG_ERROR,
"Driver does not support configured VHT capability [%s]",
name);
return 0;
}
return 1;
}
static int ieee80211ac_cap_check_max(u32 hw, u32 conf, u32 mask,
unsigned int shift,
const char *name)
{
u32 hw_max = hw & mask;
u32 conf_val = conf & mask;
if (conf_val > hw_max) {
wpa_printf(MSG_ERROR,
"Configured VHT capability [%s] exceeds max value supported by the driver (%d > %d)",
name, conf_val >> shift, hw_max >> shift);
return 0;
}
return 1;
}
int ieee80211ac_cap_check(u32 hw, u32 conf)
{
#define VHT_CAP_CHECK(cap) \
do { \
if (!_ieee80211ac_cap_check(hw, conf, cap, #cap)) \
return 0; \
} while (0)
#define VHT_CAP_CHECK_MAX(cap) \
do { \
if (!ieee80211ac_cap_check_max(hw, conf, cap, cap ## _SHIFT, \
#cap)) \
return 0; \
} while (0)
VHT_CAP_CHECK_MAX(VHT_CAP_MAX_MPDU_LENGTH_MASK);
VHT_CAP_CHECK_MAX(VHT_CAP_SUPP_CHAN_WIDTH_MASK);
VHT_CAP_CHECK(VHT_CAP_RXLDPC);
VHT_CAP_CHECK(VHT_CAP_SHORT_GI_80);
VHT_CAP_CHECK(VHT_CAP_SHORT_GI_160);
VHT_CAP_CHECK(VHT_CAP_TXSTBC);
VHT_CAP_CHECK_MAX(VHT_CAP_RXSTBC_MASK);
VHT_CAP_CHECK(VHT_CAP_SU_BEAMFORMER_CAPABLE);
VHT_CAP_CHECK(VHT_CAP_SU_BEAMFORMEE_CAPABLE);
VHT_CAP_CHECK_MAX(VHT_CAP_BEAMFORMEE_STS_MAX);
VHT_CAP_CHECK_MAX(VHT_CAP_SOUNDING_DIMENSION_MAX);
VHT_CAP_CHECK(VHT_CAP_MU_BEAMFORMER_CAPABLE);
VHT_CAP_CHECK(VHT_CAP_MU_BEAMFORMEE_CAPABLE);
VHT_CAP_CHECK(VHT_CAP_VHT_TXOP_PS);
VHT_CAP_CHECK(VHT_CAP_HTC_VHT);
VHT_CAP_CHECK_MAX(VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX);
VHT_CAP_CHECK(VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB);
VHT_CAP_CHECK(VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB);
VHT_CAP_CHECK(VHT_CAP_RX_ANTENNA_PATTERN);
VHT_CAP_CHECK(VHT_CAP_TX_ANTENNA_PATTERN);
#undef VHT_CAP_CHECK
#undef VHT_CAP_CHECK_MAX
return 1;
}
#endif /* CONFIG_IEEE80211AC */
u32 num_chan_to_bw(int num_chans)
{
switch (num_chans) {
case 2:
case 4:
case 8:
return num_chans * 20;
default:
return 20;
}
}
/* check if BW is applicable for channel */
int chan_bw_allowed(const struct hostapd_channel_data *chan, u32 bw,
int ht40_plus, int pri)
{
u32 bw_mask;
switch (bw) {
case 20:
bw_mask = HOSTAPD_CHAN_WIDTH_20;
break;
case 40:
/* HT 40 MHz support declared only for primary channel,
* just skip 40 MHz secondary checking */
if (pri && ht40_plus)
bw_mask = HOSTAPD_CHAN_WIDTH_40P;
else if (pri && !ht40_plus)
bw_mask = HOSTAPD_CHAN_WIDTH_40M;
else
bw_mask = 0;
break;
case 80:
bw_mask = HOSTAPD_CHAN_WIDTH_80;
break;
case 160:
bw_mask = HOSTAPD_CHAN_WIDTH_160;
break;
default:
bw_mask = 0;
break;
}
return (chan->allowed_bw & bw_mask) == bw_mask;
}
/* check if channel is allowed to be used as primary */
int chan_pri_allowed(const struct hostapd_channel_data *chan)
{
return !(chan->flag & HOSTAPD_CHAN_DISABLED) &&
(chan->allowed_bw & HOSTAPD_CHAN_WIDTH_20);
}