Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /sys/arch/arm/samsung/sscom_reg.h 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
/* $NetBSD: sscom_reg.h,v 1.4 2021/09/13 23:31:23 jmcneill Exp $ */

/*
 * Copyright (c) 2002, 2003 Fujitsu Component Limited
 * Copyright (c) 2002, 2003 Genetec Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of The Fujitsu Component Limited nor the name of
 *    Genetec corporation may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY FUJITSU COMPONENT LIMITED AND GENETEC
 * CORPORATION ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL FUJITSU COMPONENT LIMITED OR GENETEC
 * CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */


/*
 * Register definitions for the Exynos[45] chipsets UARTs
 */
#ifndef _ARM_SAMSUNG_SSCOM_REG_H_
#define	_ARM_SAMSUNG_SSCOM_REG_H_


#define	SSCOM_ULCON 0x00 /* UART line control */
#define	 ULCON_IR  		__BIT(6)
#define	 ULCON_PARITY		__BITS(5,3)
#define	 ULCON_PARITY_NONE	__SHIFTIN(0, ULCON_PARITY)
#define	 ULCON_PARITY_ODD	__SHIFTIN(4, ULCON_PARITY)
#define	 ULCON_PARITY_EVEN	__SHIFTIN(5, ULCON_PARITY)
#define	 ULCON_PARITY_ONE	__SHIFTIN(6, ULCON_PARITY)
#define	 ULCON_PARITY_ZERO	__SHIFTIN(7, ULCON_PARITY)
#define	 ULCON_STOP		__BIT(2)
#define  ULCON_LENGTH		__BITS(1,0)
#define	 ULCON_LENGTH_5		0
#define	 ULCON_LENGTH_6		1
#define	 ULCON_LENGTH_7		2
#define	 ULCON_LENGTH_8		3
#define	SSCOM_UCON		0x04	/* UART control */
#define  UCON_TXDMA_BRST	__BITS(22,20)
#define  UCON_TXDMA_BRST_1	__SHIFTIN(0, UCON_TXDMA)
#define  UCON_TXDMA_BRST_4	__SHIFTIN(1, UCON_TXDMA)
#define  UCON_TXDMA_BRST_8	__SHIFTIN(2, UCON_TXDMA)
#define  UCON_TXDMA_BRST_16	__SHIFTIN(3, UCON_TXDMA)
#define  UCON_RXDMA_BRST	__BITS(18,16)
#define  UCON_RXDMA_BRST_1	__SHIFTIN(0, UCON_RXDMA)
#define  UCON_RXDMA_BRST_4	__SHIFTIN(1, UCON_RXDMA)
#define  UCON_RXDMA_BRST_8	__SHIFTIN(2, UCON_RXDMA)
#define  UCON_RXDMA_BRST_16	__SHIFTIN(3, UCON_RXDMA)
#define  UCON_RXTO		__BITS(15,12)
#define	 UCON_S5L_TXTHRESH	__BIT(13)	/* Apple specific */
#define	 UCON_S5L_RXTHRESH	__BIT(12)	/* Apple specific */
#define  UCON_RXTO_FIFO_EMPTY   __BIT(11)
#define  UCON_RXTO_DMA_FSM_STOP __BIT(10)
#define	 UCON_TXINT_TYPE	__BIT(9)	/* Tx interrupt. 0=pulse,1=level */
#define	 UCON_TXINT_TYPE_LEVEL  UCON_TXINT_TYPE	/* 4412 mandatory */
#define	 UCON_TXINT_TYPE_PULSE  0
#define  UCON_S5L_RX_TIMEOUT	__BIT(9)	/* Apple specific */
#define	 UCON_RXINT_TYPE	__BIT(8)	/* Rx interrupt */
#define	 UCON_RXINT_TYPE_LEVEL  UCON_RXINT_TYPE	/* 4412 mandatory */
#define	 UCON_RXINT_TYPE_PULSE  __SHIFTIN(0,UCON_RXINT_TYPE)
#define	 UCON_TOINT		__BIT(7)	/* Rx timeout interrupt */
#define	 UCON_ERRINT		__BIT(6)	/* receive error interrupt */
#define	 UCON_LOOP		__BIT(5)	/* loopback */
#define	 UCON_SBREAK		__BIT(4)	/* send break */
#define  UCON_TXMODE		__BITS(3,2)
#define	 UCON_TXMODE_DISABLE	__SHIFTIN(0, UCON_TXMODE)
#define	 UCON_TXMODE_INT	__SHIFTIN(1, UCON_TXMODE)
#define	 UCON_TXMODE_DMA	__SHIFTIN(2, UCON_TXMODE)
#define	 UCON_TXMODE_MASK	__SHIFTIN(3, UCON_TXMODE)
#define	 UCON_RXMODE		__BITS(1,0)
#define	 UCON_RXMODE_DISABLE	__SHIFTIN(1, UCON_RXMODE)
#define	 UCON_RXMODE_INT	__SHIFTIN(1, UCON_RXMODE)
#define	 UCON_RXMODE_DMA	__SHIFTIN(2, UCON_RXMODE)
#define	 UCON_RXMODE_MASK	__SHIFTIN(3, UCON_RXMODE)
#define	SSCOM_UFCON		0x08	/* FIFO control */
#define  UFCON_TXTRIGGER	__BITS(10,8)
#define  UFCON_RXTRIGGER	__BITS(6,4)
#define	 UFCON_TXFIFO_RESET	__BIT(2)
#define	 UFCON_RXFIFO_RESET	__BIT(1)
#define	 UFCON_FIFO_ENABLE	__BIT(0)
#define	SSCOM_UMCON		0x0c	/* MODEM control */
#define  UMCON_RTSTRIGGER	__BITS(7,5)
#define  UMCON_AFC		__BIT(4)
#define  UMCON_MODEMINT_ENABLE	__BIT(3)
#define	 UMCON_RTS		__BIT(0)	/* Request to send */
#define	SSCOM_UTRSTAT		0x10	/* Status register */
#define  UTRSTAT_RXFIFOCNT	__BITS(23,16)
#define  UTRSTAT_TXDMA_FSM	__BITS(15,12)
#define  UTRSTAT_RXDMA_FSM	__BITS(11,8)
#define	 UTRSTAT_S5L_RX_TIMEOUT	__BIT(9)	/* Apple specific */
#define	 UTRSTAT_S5L_TXTHRESH	__BIT(5)	/* Apple specific */
#define	 UTRSTAT_S5L_RXTHRESH	__BIT(4)	/* Apple specific */
#define  UTRSTAT_RXTIMEOUT	__BIT(3)
#define	 UTRSTAT_TXSHIFTER_EMPTY __BIT(2)
#define	 UTRSTAT_TXEMPTY	__BIT(1) /* TX fifo or buffer empty */
#define	 UTRSTAT_RXREADY	__BIT(0) /* RX fifo or buffer is not empty */
#define	SSCOM_UERSTAT		0x14	/* Error status register */
#define	 UERSTAT_BREAK		__BIT(3) /* Break signal */
#define	 UERSTAT_FRAME		__BIT(2) /* Frame error */
#define	 UERSTAT_PARITY		__BIT(1) /* Parity error */
#define	 UERSTAT_OVERRUN	__BIT(0) /* Overrun */
#define	 UERSTAT_ALL_ERRORS (UERSTAT_OVERRUN|UERSTAT_BREAK|UERSTAT_FRAME|UERSTAT_PARITY)
#define	SSCOM_UFSTAT		0x18	/* Fifo status register */
#define	 UFSTAT_TXFULL		__BIT(24) /* Tx fifo full */
#define	 UFSTAT_TXCOUNT	  	__BITS(23,16)	/* TX FIFO count */
#define  UFSTAT_RXERROR		__BIT(9)
#define	 UFSTAT_S5L_TXFULL	__BIT(9) /* Tx fifo full (Apple) */
#define	 UFSTAT_RXFULL		__BIT(8) /* Rx fifo full */
#define	 UFSTAT_S5L_RXFULL	__BIT(8) /* Rx fifo full (Apple) */
#define	 UFSTAT_RXCOUNT		__BITS(7,0)	/* RX FIFO count */
#define	 UFSTAT_S5L_RXCOUNT	__BITS(3,0)	/* RX FIFO count (Apple) */
#define	SSCOM_UMSTAT		0x1c	/* Modem status register */
#define  UMSTAT_DCTS		__BIT(4)
#define	 UMSTAT_CTS		__BIT(0) /* Clear to send */
#if _BYTE_ORDER == _LITTLE_ENDIAN
#define	SSCOM_UTXH		0x20	/* Transmit data register */
#define	SSCOM_URXH		0x24	/* Receive data register */
#else
#define	SSCOM_UTXH		0x23	/* Transmit data register */
#define	SSCOM_URXH		0x27	/* Receive data register */
#endif
#define	SSCOM_UBRDIV		0x28	/* baud-rate divisor [15:0] */
#define	SSCOM_UFRACVAL		0x2C	/* baud-rate fraction [3:0] */

/* Interrupt controller */
#define SSCOM_UINTP		0x30	/* interrupt source */
#define SSCOM_UINTSP		0x34	/* pending interrupts */
#define SSCOM_UINTM		0x38	/* interrupt masking */
#define   UINT_MODEM		__BIT(3)
#define   UINT_TXD		__BIT(2)
#define   UINT_ERROR		__BIT(1)
#define   UINT_RXD		__BIT(0)

#define	SSCOM_SIZE  0x3C

#endif /* _ARM_SAMSUNG_SSCOM_REG_H_ */