/* $NetBSD: motoi2creg.h,v 1.3 2014/10/07 21:32:10 matt Exp $ */ /*- * Copyright (c) 2007, 2010 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Matt Thomas. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _DEV_I2C_MOTOI2CREG_H_ #define _DEV_I2C_MOTOI2CREG_H_ /* * This I2C controller is a common design used on many Motorola/Freescale * chip like the i.MX/MC9328, MPC8548, etc. Different names in bit field * definition and not suffered from document error. */ #define I2CADR 0x0000 /* my own I2C addr to respond for an external master */ #define I2CFDR 0x0004 /* frequency devider */ #define I2CCR 0x0008 /* control */ #define CR_MEN 0x80 /* enable this HW */ #define CR_MIEN 0x40 /* enable interrupt */ #define CR_MSTA 0x20 /* 0->1 activates START, 1->0 makes STOP condition */ #define CR_MTX 0x10 /* 1 for Tx, 0 for Rx */ #define CR_TXAK 0x08 /* 1 makes no acknowledge when Rx */ #define CR_RSTA 0x04 /* generate repeated START condition */ #define I2CSR 0x000c /* status */ #define SR_MCF 0x80 /* 0 means transfer in progress, 1 when completed */ #define SR_MAAS 0x40 /* 1 means addressed as slave */ #define SR_MBB 0x20 /* 1 before STOP condition is detected */ #define SR_MAL 0x10 /* arbitration was lost */ #define SR_MIF 0x02 /* indicates data transter completion */ #define SR_RXAK 0x01 /* 1 to indicate receive has completed */ #define I2CDR 0x0010 /* data */ #define I2CDFSRR 0x0014 /* digital filter sampling rate register */ /* * The equation to calculate the divider frequency (from AN2919) is: * * Frequency divider = B * (A + (floor(3 * C / B) * 2)) * * where (in little endian bit order, msb to lsb) FDR is split into 2 3-bit * fields: fA contains bits 5,1,0 and fB contains bits 4,3,2. * * A is used as an index into { 9, 10, 12, 15, 5, 6, 7, 8 } though * on faster machines these are doubled to { 18, 20, 24, 50, 10, 12, 14, 16 }. * B is either 2**(b + 1) or 2**(b + 4). * * C is the sampling rate, which may be settable via I2CDFSRR register though * not all implementations have it. Regardless, we just leave it at its * default setting (16). So floor(3 * C / B) * 2 becomes a precomputable * quantity. Once we know its value for fB=0, we can simply shift it right * as fB increases since B is a power-of-2. */ #define FDR_A(n) (((n) & 0x20) >> 3) | ((n) & 3)) #define FDR_B(n) (((n) & 0x1c) >> 2) #define MOTOI2C_GROUP_A_VALUES 0x8765fca9U #define MOTOI2C_A(a) ((MOTOI2C_GROUP_A_VALUE >> (4*(a))) & 0xf) #define MOTOI2C_B(b) (1 + (b)) #define MOTOI2C_DIV(name, fdr) \ ((name##_A(FDR_A(fdr)) + named##_C(FDR_B(fdr))) << name##_B(FDR_B(fdr))) #define IMX31_A(fdr_a) MOTOI2C_A(fdr_a) #define IMX31_B(fdr_b) MOTOI2C_B(fdr_b) #define IMX31_C(fdr_b) (6 >> (fdr_b)) #define IMX31_DIV(fdr) MOTOI2C_DIV(IMX31, fdr) #define MCF52259_A(fdr_a) MOTOI2C_A(fdr_a) #define MCF52259_B(fdr_b) MOTOI2C_B(fdr_b) #define MCF52259_C(fdr_b) (5 >> (fdr_b)) #define MCF52259_DIV(fdr) MOTOI2C_DIV(MCF52259, fdr) #define MPC85xx_A(fdr_a) (MOTOI2C_A(fdr_a) << 1) #define MPC85xx_B(fdr_b) (4 + (fdr_b)) #define MPC85xx_C(fdr_b) ((6 >> (fdr_b)) & ~1) #define MPC85xx_DIV(fdr) MOTOI2C_DIV(MPC85xx, fdr) #endif /* !_DEV_I2C_MOTOI2CREG_H_ */ |