/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
* BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
*
* Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <dt-bindings/clock/bcm-nsp.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
chipcommonA@18000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
#address-cells = <1>;
#size-cells = <1>;
uart0: serial@300 {
compatible = "ns16550";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
status = "disabled";
};
uart1: serial@400 {
compatible = "ns16550";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&iprocslow>;
pinctrl-names = "default";
pinctrl-0 = <&pinmux_uart1>;
status = "disabled";
};
};
mpcore@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
a9pll: arm_clk@0 {
#clock-cells = <0>;
compatible = "brcm,nsp-armpll";
clocks = <&osc>;
reg = <0x00000 0x1000>;
};
scu@20000 {
compatible = "arm,cortex-a9-scu";
reg = <0x20000 0x100>;
};
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x20600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};
watchdog@20620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x20620 0x20>;
interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};
gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x21000 0x1000>,
<0x20100 0x100>;
};
L2: cache-controller@22000 {
compatible = "arm,pl310-cache";
reg = <0x22000 0x1000>;
cache-unified;
arm,shared-override;
prefetch-data = <1>;
prefetch-instr = <1>;
cache-level = <2>;
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts =
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
};
iprocmed: iprocmed {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
clock-div = <2>;
clock-mult = <1>;
};
iprocslow: iprocslow {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
clock-div = <4>;
clock-mult = <1>;
};
periph_clk: periph_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clocks = <&a9pll>;
clock-div = <2>;
clock-mult = <1>;
};
};
usb2_phy: usb2-phy@1800c000 {
compatible = "brcm,ns-usb2-phy";
reg = <0x1800c000 0x1000>;
reg-names = "dmu";
#phy-cells = <0>;
clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
clock-names = "phy-ref-clk";
};
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
ranges = <0x00000000 0x18000000 0x00100000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <1>;
interrupt-map-mask = <0x000fffff 0xffff>;
interrupt-map =
/* ChipCommon */
<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
/* Switch Register Access Block */
<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
/* PCIe Controller 0 */
<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
/* PCIe Controller 1 */
<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
/* PCIe Controller 2 */
<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
/* USB 2.0 Controller */
<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
/* USB 3.0 Controller */
<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
/* Ethernet Controller 0 */
<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
/* Ethernet Controller 1 */
<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
/* Ethernet Controller 2 */
<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
/* Ethernet Controller 3 */
<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
/* NAND Controller */
<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
chipcommon: chipcommon@0 {
reg = <0x00000000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
pcie0: pcie@12000 {
reg = <0x00012000 0x1000>;
};
pcie1: pcie@13000 {
reg = <0x00013000 0x1000>;
};
pcie2: pcie@14000 {
reg = <0x00014000 0x1000>;
};
usb2: usb2@21000 {
reg = <0x00021000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-parent = <&gic>;
ehci: usb@21000 {
#usb-cells = <0>;
compatible = "generic-ehci";
reg = <0x00021000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy>;
#address-cells = <1>;
#size-cells = <0>;
ehci_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
ehci_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
ohci: usb@22000 {
#usb-cells = <0>;
compatible = "generic-ohci";
reg = <0x00022000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ohci_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
ohci_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
usb3: usb3@23000 {
reg = <0x00023000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-parent = <&gic>;
xhci: usb@23000 {
#usb-cells = <0>;
compatible = "generic-xhci";
reg = <0x00023000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy>;
phy-names = "usb";
#address-cells = <1>;
#size-cells = <0>;
xhci_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
};
gmac0: ethernet@24000 {
reg = <0x24000 0x800>;
};
gmac1: ethernet@25000 {
reg = <0x25000 0x800>;
};
gmac2: ethernet@26000 {
reg = <0x26000 0x800>;
};
gmac3: ethernet@27000 {
reg = <0x27000 0x800>;
};
};
pwm: pwm@18002000 {
compatible = "brcm,iproc-pwm";
reg = <0x18002000 0x28>;
clocks = <&osc>;
#pwm-cells = <3>;
status = "disabled";
};
mdio: mdio@18003000 {
compatible = "brcm,iproc-mdio";
reg = <0x18003000 0x8>;
#size-cells = <0>;
#address-cells = <1>;
};
mdio-bus-mux@18003000 {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x18003000 0x4>;
mux-mask = <0x200>;
mdio@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
usb3_phy: usb3-phy@10 {
compatible = "brcm,ns-ax-usb3-phy";
reg = <0x10>;
usb3-dmp-syscon = <&usb3_dmp>;
#phy-cells = <0>;
status = "disabled";
};
};
};
usb3_dmp: syscon@18105000 {
reg = <0x18105000 0x1000>;
};
uart2: serial@18008000 {
compatible = "ns16550a";
reg = <0x18008000 0x20>;
clocks = <&iprocslow>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
status = "disabled";
};
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
status = "disabled";
};
dmu@1800c000 {
compatible = "simple-bus";
ranges = <0 0x1800c000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
cru@100 {
compatible = "simple-bus";
reg = <0x100 0x1a4>;
ranges;
#address-cells = <1>;
#size-cells = <1>;
lcpll0: lcpll0@100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";
reg = <0x100 0x14>;
clocks = <&osc>;
clock-output-names = "lcpll0", "pcie_phy",
"sdio", "ddr_phy";
};
genpll: genpll@140 {
#clock-cells = <1>;
compatible = "brcm,nsp-genpll";
reg = <0x140 0x24>;
clocks = <&osc>;
clock-output-names = "genpll", "phy",
"ethernetclk",
"usbclk", "iprocfast",
"sata1", "sata2";
};
pinctrl: pin-controller@1c0 {
compatible = "brcm,bcm4708-pinmux";
reg = <0x1c0 0x24>;
reg-names = "cru_gpio_control";
spi-pins {
groups = "spi_grp";
function = "spi";
};
pinmux_i2c: i2c-pins {
groups = "i2c_grp";
function = "i2c";
};
pinmux_pwm: pwm-pins {
groups = "pwm0_grp", "pwm1_grp",
"pwm2_grp", "pwm3_grp";
function = "pwm";
};
pinmux_uart1: uart1-pins {
groups = "uart1_grp";
function = "uart1";
};
};
thermal: thermal@2c0 {
compatible = "brcm,ns-thermal";
reg = <0x2c0 0x10>;
#thermal-sensor-cells = <0>;
};
};
};
srab: ethernet-switch@18007000 {
compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
reg = <0x18007000 0x1000>;
status = "disabled";
/* ports are defined in board DTS */
ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
rng: rng@18004000 {
compatible = "brcm,bcm5301x-rng";
reg = <0x18004000 0x14>;
};
nand_controller: nand-controller@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
};
spi@18029200 {
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18029200 0x184>,
<0x18029000 0x124>,
<0x1811b408 0x004>,
<0x180293a0 0x01c>;
reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mspi_done",
"mspi_halted",
"spi_lr_fullness_reached",
"spi_lr_session_aborted",
"spi_lr_impatient",
"spi_lr_session_done",
"spi_lr_overread";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
spi_nor: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
status = "disabled";
partitions {
compatible = "brcm,bcm947xx-cfe-partitions";
};
};
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <1000>;
coefficients = <(-556) 418000>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <125000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
};
};