/* $NetBSD: epereg.h,v 1.4 2009/10/23 00:39:30 snj Exp $ */
/*
* Copyright (c) 2004 Jesse Off
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS
* HEAD BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _EPEREG_H_
#define _EPEREG_H_
#define EP93XX_AHB_EPE 0x00010000UL
#define EPE_SIZE 0x000000f0UL
#define EPE_RXCtl 0x00000000UL /* Receiver Control */
#define RXCtl_IA0 0x00000001UL
#define RXCtl_IA1 0x00000002UL
#define RXCtl_IA2 0x00000004UL
#define RXCtl_IA3 0x00000008UL
#define RXCtl_IAHA 0x00000100UL
#define RXCtl_MA 0x00000200UL
#define RXCtl_BA 0x00000400UL
#define RXCtl_PA 0x00000800UL
#define RXCtl_RA 0x00001000UL
#define RXCtl_RCRCA 0x00002000UL
#define RXCtl_SRxON 0x00010000UL
#define RXCtl_BCRC 0x00020000UL
#define RXCtl_RxFCE0 0x00040000UL
#define RXCtl_RxFCE1 0x00080000UL
#define RXCtl_PauseA 0x00100000UL
#define EPE_TXCtl 0x00000004UL /* Transmitter Control */
#define TXCtl_STxON 0x00000001UL
#define EPE_TestCtl 0x00000008UL /* Test Control */
#define TestCtl_MFDX 0x00000040UL
#define EPE_MIICmd 0x00000010UL /* MII Command */
#define MIICmd_READ 0x00008000UL
#define MIICmd_WRITE 0x00004000UL
#define EPE_MIIData 0x00000014UL /* MII Data */
#define EPE_MIISts 0x00000018UL /* MII Status */
#define MIISts_BUSY 0x00000001UL
#define EPE_SelfCtl 0x00000020UL /* Self Control */
#define SelfCtl_RESET 0x00000001UL
#define SelfCtl_PSPRS 0x00000100UL
#define SelfCtl_MDCDIV(x) (((x) - 1) << 9)
#define EPE_IntEn 0x00000024UL /* Interrupt Enable */
#define IntEn_TSQIE 0x00000008UL
#define IntEn_REOFIE 0x00000004UL
#define IntEn_ECIE 0x02000000UL
#define EPE_IntStsP 0x00000028UL /* Interrupt Status Preserve */
#define EPE_IntStsC 0x0000002cUL /* Interrupt Status Clear */
#define IntSts_RxSQ 0x00000004UL
#define IntSts_TxSQ 0x00000008UL
#define IntSts_ECI 0x02000000UL
#define IntSts_MIII 0x00001000UL
#define EPE_DiagAd 0x00000038UL /* Diagnostic Address */
#define EPE_DiagDa 0x0000003cUL /* Diagnostic Data */
#define EPE_GT 0x00000040UL /* General Timer */
#define EPE_FCT 0x00000044UL /* Flow Control Timer */
#define EPE_FCF 0x00000048UL /* Flow Control Format */
#define EPE_AFP 0x0000004cUL /* Address Filter Pointer */
#define EPE_IndAd 0x00000050UL /* Individual Address */
#define EPE_IndAd_SIZE 0x6
#define EPE_HashTbl 0x00000050UL /* Hash Table */
#define EPE_HashTbl_SIZE 0x8
#define EPE_GIIntSts 0x00000060UL /* Global Interrupt Status */
#define EPE_GIIntMsk 0x00000064UL /* Global Interrupt Mask */
#define GIIntMsk_INT 0x00008000UL
#define EPE_GIIntROSts 0x00000068UL /* Global Interrupt Read-Only Status */
#define EPE_GIIntFrc 0x0000006cUL /* Global Interrupt Force */
#define EPE_TXCollCnt 0x00000070UL /* Transmit Collision Count */
#define EPE_RXMissCnt 0x00000074UL /* Receive Miss Count */
#define EPE_RXRuntCnt 0x00000078UL /* Receive Runt Count */
#define EPE_BMCtl 0x00000080UL /* Bus Master Control */
#define BMCtl_RxEn 0x00000001UL
#define BMCtl_TxEn 0x00000100UL
#define EPE_BMSts 0x00000084UL /* Bus Master Status */
#define BMSts_RxAct 0x00000080UL
#define EPE_RXBCA 0x00000088UL /* Receive Buffer Current Address */
#define EPE_RXDQBAdd 0x00000090UL /* Receive Descriptor Queue Base Addr */
#define EPE_RXDQBLen 0x00000094UL /* Receive Descriptor Queue Base Len */
#define EPE_RXDQCurLen 0x00000096UL /* Recv Descriptor Queue Current Len */
#define EPE_RXDCurAdd 0x00000098UL /* Recv Descriptor Current Address */
#define EPE_RXDEnq 0x0000009cUL /* Receive Descriptor Enqueue */
#define EPE_RXStsQBAdd 0x000000a0UL /* Receive Status Queue Base Address */
#define EPE_RXStsQBLen 0x000000a4UL /* Receive Status Queue Base Length */
#define EPE_RXStsQCurLen 0x000000a6UL /* Recv Sts Q Current Length */
#define EPE_RXStsQCurAdd 0x000000a8UL /* Recv Sts Q Current Address */
#define EPE_RXStsEnq 0x000000acUL /* Receive Status Enqueue */
#define EPE_TXDQBAdd 0x000000b0UL /* Transmit Descriptor Q Base Addr */
#define EPE_TXDQBLen 0x000000b4UL /* Transmit Descriptor Q Base Length */
#define EPE_TXDQCurLen 0x000000b6UL /* Transmit Descriptor Q Current Len */
#define EPE_TXDQCurAdd 0x000000b8UL /* Transmit Descriptor Q Current Addr */
#define EPE_TXDEnq 0x000000bcUL /* Transmit Descriptor Enqueue */
#define EPE_TXStsQBAdd 0x000000c0UL /* Transmit Status Queue Base Address */
#define EPE_TXStsQBLen 0x000000c4UL /* Transmit Status Queue Base Length */
#define EPE_TXStsQCurLen 0x000000c6UL /* Transmit Sts Q Current Len */
#define EPE_TXStsQCurAdd 0x000000c8UL /* Transmit Sts Q Current Adr */
#define EPE_RXBufThrshld 0x000000d0UL /* Receive Buffer Threshold */
#define EPE_TXBufThrshld 0x000000d4UL /* Transmit Buffer Threshold */
#define EPE_RXStsThrshld 0x000000d8UL /* Receive Status Threshold */
#define EPE_TXStsThrshld 0x000000dcUL /* Transmit Status Threshold */
#define EPE_RXDThrshld 0x000000e0UL /* Receive Descriptor Threshold */
#define EPE_TXDThrshld 0x000000e4UL /* Transmit Descriptor Threshold */
#define EPE_MaxFrmLen 0x000000e8UL /* Maximum Frame Length */
#define EPE_RXHdrLen 0x000000ecUL /* Receive Header Length */
#define EPE_MACFIFO 0x00004000UL /* FIFO RAM */
#define EPE_MACFIFO_SIZE 0xc000UL
/* Receive Status Queue, First Word */
#define RXStsQ_RFP 0x80000000UL
#define RXStsQ_RWE 0x40000000UL
#define RXStsQ_EOF 0x20000000UL
#define RXStsQ_EOB 0x10000000UL
#define RXStsQ_RX_Err 0x00200000UL
#define RXStsQ_OE 0x00100000UL
#define RXStsQ_FE 0x00080000UL
#define RXStsQ_Runt 0x00040000UL
#define RXStsQ_EData 0x00020000UL
#define RXStsQ_CRCE 0x00010000UL
#define RXStsQ_CRCI 0x00008000UL
/* Transmit Status Queue */
#define TXStsQ_TxFP 0x80000000UL
#define TXStsQ_TxWE 0x40000000UL
#define TXStsQ_FA 0x20000000UL
#define TXStsQ_LCRS 0x10000000UL
#define TXStsQ_OW 0x04000000UL
#define TXStsQ_TxU 0x02000000UL
#define TXStsQ_EColl 0x01000000UL
#endif /* _EPEREG_H_ */