/* $NetBSD: ixp12x0reg.h,v 1.7 2009/10/21 14:15:50 rmind Exp $ */
/*
* Copyright (c) 2002, 2003
* Ichiro FUKUHARA <ichiro@ichiro.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS HEAD BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _IXP12X0REG_H_
#define _IXP12X0REG_H_
/*
* Physical memory map for the Intel IXP12X0
*/
/*
* FFFF FFFF ---------------------------
* Device 6
* SDRAM
* FF00 0000 - FF00 0014
* SDRAM Control Register
* D000 0000 - DFFF FFFF
* Prefetch 256MB
* C000 0000 - CFFF FFFF
* non-Prefetch 256MB
* C000 0000 ---------------------------
* Device 5
* AMBA Translation (ATU)
* B000 0000 ---------------------------
* Device 4
* Reserved
* A000 0000 ---------------------------
* Device 3
* StrongARM Core System
* 9000 0000 ---------------------------
* Device 2
* Reserved
* 8000 0000 ---------------------------
* Device 1
* PCI UNIT
* 6000 0000 - 7FFF FFFF
* PCI Memory Cycle Access
* 5400 0000 - 5400 FFFF
* PCI I/O Cycle Access
* 5300 0000 - 53BF FFFF
* PCI Type0 Configuration Cycle Access
* 5200 0000 - 52FF FFFF
* PCI Type1 Configuration Cycle Access
* 4200 0000 - 4200 03FF
* Local PCI Configuration Space
* 4000 0000 ---------------------------
* Device 0
* SRAM UNIT
* 0000 0000 ---------------------------
*/
/*
* Virtual memory map for the Intel IXP12X0 integrated devices
*
* IXP12x0 processors have many device registers at very lower addresses.
* To make user process space wider, we map the registers at lower address
* to upper address using address translation of virtual memory system.
*
* Some device registers are staticaly mapped on upper address region.
* because we have to access them before bus_space is initialized.
* Most device is dinamicaly mapped by bus_space_map(). In this case,
* the actual mapped (virtual) address are not cared by device drivers.
*/
/*
* FFFF FFFF ---------------------------
*
* F400 0000 ---------------------------
* PCI Type 0 Configuration Cycle Access
* VA F300 0000 == PA 5300 0000 (16Mbyte)
* F300 0000 ---------------------------
* PCI Type 1 Configuration Cycle Access
* VA F200 0000 == PA 5200 0000 (16Mbyte)
* F200 0000 ---------------------------
* not used
* F020 0000 ---------------------------
* PCI Registers Accessible Through I/O
* VA F010 0000 == PA 5400 0000 (1Mbyte)
* F010 0000 ---------------------------
* not used
* F001 1000 ---------------------------
* PCI Registers Accessible Through StrongARM Core
* VA F001 0000 == PA 4200 0000 (4kbyte)
* F001 0300 - F001 036F TIMER
* F001 0200 - F001 0293 PCI_FIQ
* F001 0180 - F001 0193 PCI_IRQ
* F001 0000 ---------------------------
* StrongARM System and Peripheral Registers
* VA F000 0000 == PA 9000 0000 (64kbyte)
* F000 3400 - F000 3C03 UART
* F000 3400 - F000 3C03 UART
* F000 2000 - F000 3003 RTC
* F000 1C00 - F000 1C03 GPIO_DATA
* F000 1800 - F000 1C03 GPIO
* F000 1400 - F000 1403 IRQ
* F000 1000 - F000 1003 FIQ
* F000 0C00 - F000 0C03 PLL_CFG (not used at this addres)
* F000 0000 ---------------------------
* Kernel text and data
* C000 0000 ---------------------------
* L2 tables for user process (XXX should be fixed)
* 8000 0000 ---------------------------
* PCI Registers Accessible Through Memory
* VA 6000 0000 == PA 6000 0000 (512Mbyte)
* 6000 0000 ---------------------------
* 5400 0000 ---------------------------
* 0000 0000 ---------------------------
*
*/
/* Virtual address for I/O space */
#define IXP12X0_IO_VBASE 0xf0000000UL
/* StrongARM System and Peripheral Registers */
#define IXP12X0_SYS_VBASE 0xf0000000UL
#define IXP12X0_SYS_HWBASE 0x90000000UL
#define IXP12X0_SYS_SIZE 0x00010000UL /* 64Kbyte */
#define IXP12X0_PLL_CFG (IXP12X0_IO_VBASE + 0x0c00)
#define IXP12X0_PLL_CFG_CCF 0x1f
/* PCI Registers Accessible Through StrongARM Core */
#define IXP12X0_PCI_VBASE 0xf0010000UL
#define IXP12X0_PCI_HWBASE 0x42000000UL
#define IXP12X0_PCI_SIZE 0x00001000UL /* 4Kbyte */
/* PCI I/O Space */
#define IXP12X0_PCI_IO_VBASE 0xf0100000UL
#define IXP12X0_PCI_IO_HWBASE 0x54000000UL
#define IXP12X0_PCI_IO_SIZE 0x00100000UL /* 1Mbyte */
/* PCI Memory Space */
#define IXP12X0_PCI_MEM_HWBASE 0x60000000UL /* VA == PA */
#define IXP12X0_PCI_MEM_VBASE IXP12X0_PCI_MEM_HWBASE
#define IXP12X0_PCI_MEM_SIZE 0x20000000UL
/* PCI Type0/1 Configuration address */
#define IXP12X0_PCI_TYPE0_HWBASE 0x53000000UL
#define IXP12X0_PCI_TYPE0_VBASE 0xf3000000UL
#define IXP12X0_PCI_TYPE0_SIZE 0x01000000UL /* 16MB */
#define IXP12X0_PCI_TYPE1_HWBASE 0x52000000UL
#define IXP12X0_PCI_TYPE1_VBASE 0xf2000000UL
#define IXP12X0_PCI_TYPE1_SIZE 0x01000000UL /* 16MB */
/*
* SlowPort I/O Register
*/
/* see. arch/evbarm/ixm1200/ixm1200reg.h */
/* Physical register base addresses */
/* #define IXP12X0_GPIO_VBASE */
#define IXP12X0_GPIO_HWBASE 0x90001800UL
#define IXP12X0_GPIO_SIZE 0x00000800UL
/* Interrupts */
#define IXP12X0_FIQ_VBASE (IXP12X0_IO_VBASE + 0x1000)
#define IXP12X0_FIQ_HWBASE 0x90001000UL
#define IXP12X0_FIQ_SIZE 0x00000004UL
#define IXP12X0_IRQ_VBASE (IXP12X0_IO_VBASE + 0x1400)
#define IXP12X0_IRQ_HWBASE 0x90001400UL
#define IXP12X0_IRQ_SIZE 0x00000004UL
/*
* Interrupt index assignment
*
*
* FIQ/IRQ bitmap in "StrongARM System and Peripheral Registers"
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
* bit 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-------------------------------------------+-+-+-+-+-+-+-+---+
* |M| |U|S|R|S|U|C|P| |
* |B| |A|D|T|R|E|I|C| |
* |Z| RES |R|R|C|A|N|N|I|RES|
* | | |T|A| |M|G|T| | |
* | | | |M| | | | | | |
* +-+-------------------------------------------+-+-+-+-+-+-+-+---+
* 3
* index 1 8 7 6 5 4 3 2
*
*
* We Map a software interrupt queue index to the unused bits in the
* IRQ/FIQ registers. (in "StrongARM System and Peripheral Registers")
*
* XXX will need to revisit this if those bits are ever used in future
* steppings).
*
* 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
* bit 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-----------------------------------+-+-+-+-+-+-+-+---+
* |M|S|C|N|S| |U|S|R|S|U|C|P| |
* |B|O|L|E|E| |A|D|T|R|E|I|C| |
* |Z|F|O|T|R| RES |R|R|C|A|N|N|I|RES|
* | |T|C| |I| |T|A| |M|G|T| | |
* | | |K| |A| | |M| | | | | | |
* | | | | |L| | | | | | | | | |
* +-+-+-+-+-+-----------------------------------+-+-+-+-+-+-+-+---+
* 3 3 2 2 2
* index 1 0 9 8 7 8 7 6 5 4 3 2
*
*/
#define NIRQ 64
#define SYS_NIRQ 32
#define IXP12X0_INTR_MBZ 31
#define IXP12X0_INTR_bit30 30
#define IXP12X0_INTR_bit29 29
#define IXP12X0_INTR_bit28 28
#define IXP12X0_INTR_bit27 27
#define IXP12X0_INTR_bit26 26
#define IXP12X0_INTR_bit25 25
#define IXP12X0_INTR_bit24 24
#define IXP12X0_INTR_bit23 23
#define IXP12X0_INTR_bit22 22
#define IXP12X0_INTR_bit21 21
#define IXP12X0_INTR_bit20 20
#define IXP12X0_INTR_bit19 19
#define IXP12X0_INTR_bit18 18
#define IXP12X0_INTR_bit17 17
#define IXP12X0_INTR_bit16 16
#define IXP12X0_INTR_bit15 15
#define IXP12X0_INTR_bit14 14
#define IXP12X0_INTR_bit13 13
#define IXP12X0_INTR_bit12 12
#define IXP12X0_INTR_bit11 11
#define IXP12X0_INTR_bit10 10
#define IXP12X0_INTR_bit9 9
#define IXP12X0_INTR_UART 8
#define IXP12X0_INTR_SDRAM 7
#define IXP12X0_INTR_RTC 6
#define IXP12X0_INTR_SRAM 5
#define IXP12X0_INTR_UENG 4
#define IXP12X0_INTR_CINT 3
#define IXP12X0_INTR_PCI 2
#define IXP12X0_INTR_bit1 1
#define IXP12X0_INTR_bit0 0
#define IXP12X0_INTR_MASK \
((1U << IXP12X0_INTR_MBZ) \
| (1U << IXP12X0_INTR_UART) \
| (1U << IXP12X0_INTR_SDRAM) \
| (1U << IXP12X0_INTR_RTC) \
| (1U << IXP12X0_INTR_SRAM) \
| (1U << IXP12X0_INTR_UENG) \
| (1U << IXP12X0_INTR_CINT))
#endif /* _IXP12X0REG_H_ */